Download or read book Turbulent Shear Flows I written by F. Durst and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book contains papers that have been selected from contributions to the First International Symposium on Turbulent Shear Flows which was held from the 18th to 20th April 1977 at The Pennsylvania State University, University Park, Pennsylvania, USA. Attend ees from close to 20 countries presented over 100 contributions at this meeting in which many aspects of the current activities in turbulence research were covered. Five topics received particular attention at the Symposium: Free Flows Wall Flows Recirculating Flows Developments in Reynolds Stress Closures New Directions in Modeling This is also reflected in the five chapters of this book with contributions from research workers from different countries. Each chapter covers the most valuable contributions of the conference to the particular chapter topic. Of course, there were many additional good con tributions to each subject at the meeting but the limitation imposed on the length of this volume required that a selection be made. The realization of the First International Symposium on Turbulent Shear Flows was p- sible by the general support of: U. S. Army Research Office U. S. Navy Research Office Continuing Education Center of The Pennsylvania State University The conference organization was carried out by the organizing committee consisting of: F. Durst, Universitat Karlsruhe, Karlsruhe, Fed. Rep. of Germany V. W. Goldschmidt, Purdue University, West Lafayette, Ind. , USA B. E. Launder, University of California, Davis, Calif. , USA F. W. Schmidt, Pennsylvania State University, University Park, Penna.
Download or read book Vortex Methods and Vortex Motion written by Karl E. Gustafson and published by SIAM. This book was released on 1991-01-01 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vortex methods have emerged as a new class of powerful numerical techniques to analyze and compute vortex motion. This book addresses the theoretical, numerical, computational, and physical aspects of vortex methods and vortex motion. Vortex phenomena in fluid flows and the experimental, theoretical, and numerical methods used to characterize them are discussed in reviews by leading experts. Extensive photographs and sample computer graphics are provided. The development of large vortex structure in fluid flow is responsible for some of the most fascinating aspects of fluid dynamics, such as mixing, shearing, transport, and instability. Such issues arise in a variety of flow regimes, ranging from fundamental mathematical questions in laminar, transitional, and turbulent flow to sophisticated engineering settings and devices.
Download or read book Vortex Element Methods for Fluid Dynamic Analysis of Engineering Systems written by R. I. Lewis and published by Cambridge University Press. This book was released on 2005-07-21 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Panel methods employing surface distributions of source and vortex singularities based on the solution of boundary integral equations have been extensively used for modeling external and internal aerodynamic flows. Part 1 describes the surface vorticity method and illustrates applications of this technique over a wide range of engineering problems in aerodynamics and turbomachines, including lifting aerofoils and cascades, mixed-flow and rotating cascades for fans, pumps or turbines, meridional flows in turbomachines, flow past axisymmetric bodies, ducts and ducted propellers or fans. Part 2 extends surface vorticity modeling to the fairly new CFM field of vortex dynamics or vortex cloud theory. Methods are developed, again from first principles, to deal with shear layers, boundary layers, periodic wakes, bluff-body flows, cascades and aerofoils including the use of stall control spoilers. A number of useful computer programs are included.
Download or read book Engineering Turbulence Modelling and Experiments 6 written by Wolfgang Rodi and published by Elsevier. This book was released on 2005-05-05 with total page 1011 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the world renowned ERCOFTAC (International Symposium on Engineering Turbulence Modelling and Measurements).The proceedings include papers dealing with the following areas of turbulence:·Eddy-viscosity and second-order RANS models ·Direct and large-eddy simulations and deductions for conventional modelling ·Measurement and visualization techniques, experimental studies ·Turbulence control ·Transition and effects of curvature, rotation and buoyancy on turbulence ·Aero-acoustics ·Heat and mass transfer and chemically reacting flows ·Compressible flows, shock phenomena ·Two-phase flows ·Applications in aerospace engineering, turbomachinery and reciprocating engines, industrial aerodynamics and wind engineering, and selected chemical engineering problems Turbulence remains one of the key issues in tackling engineering flow problems. These problems are solved more and more by CFD analysis, the reliability of which depends strongly on the performance of the turbulence models employed. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation. As in other fields of Science, in the rapidly developing discipline of turbulence, swift progress can be achieved only by keeping up to date with recent advances all over the world and by exchanging ideas with colleagues active in related fields.
Download or read book Modeling Complex Turbulent Flows written by Manuel D. Salas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence modeling both addresses a fundamental problem in physics, 'the last great unsolved problem of classical physics,' and has far-reaching importance in the solution of difficult practical problems from aeronautical engineering to dynamic meteorology. However, the growth of supercom puter facilities has recently caused an apparent shift in the focus of tur bulence research from modeling to direct numerical simulation (DNS) and large eddy simulation (LES). This shift in emphasis comes at a time when claims are being made in the world around us that scientific analysis itself will shortly be transformed or replaced by a more powerful 'paradigm' based on massive computations and sophisticated visualization. Although this viewpoint has not lacked ar ticulate and influential advocates, these claims can at best only be judged premature. After all, as one computational researcher lamented, 'the com puter only does what I tell it to do, and not what I want it to do. ' In turbulence research, the initial speculation that computational meth ods would replace not only model-based computations but even experimen tal measurements, have not come close to fulfillment. It is becoming clear that computational methods and model development are equal partners in turbulence research: DNS and LES remain valuable tools for suggesting and validating models, while turbulence models continue to be the preferred tool for practical computations. We believed that a symposium which would reaffirm the practical and scientific importance of turbulence modeling was both necessary and timely.
Download or read book Engineering Turbulence Modelling and Experiments 3 written by G. Bergeles and published by Newnes. This book was released on 2012-12-02 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents and discussses new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. At present, turbulence is one of the key issues in tackling engineering flow problems. Powerful computers and numerical methods are now available for solving the flow equations, but the simulation of turbulence effects which are nearly always important in practice, is still in an unsatisfactory state and introduces considerable uncertainities in the accuracy of CFD calculations. These and other aspects of turbulence modelling and measurements are dealt with in detail by experts in the field. The resulting book is an up-to-date review of the most recent research in this exciting area.
Download or read book Fluid Vortices written by Sheldon Green and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid Vortices is a comprehensive, up-to-date, research-level overview covering all salient flows in which fluid vortices play a significant role. The various chapters have been written by specialists from North America, Europe and Asia, making for unsurpassed depth and breadth of coverage. Topics addressed include fundamental vortex flows (mixing layer vortices, vortex rings, wake vortices, vortex stability, etc.), industrial and environmental vortex flows (aero-propulsion system vortices, vortex-structure interaction, atmospheric vortices, computational methods with vortices, etc.), and multiphase vortex flows (free-surface effects, vortex cavitation, and bubble and particle interactions with vortices). The book can also be recommended as an advanced graduate-level supplementary textbook. The first nine chapters of the book are suitable for a one-term course; chapters 10--19 form the basis for a second one-term course.
Download or read book A Critical Evaluation of Various Turbulence Models as Applied to Internal Fluid Flows written by M. Nallasamy and published by . This book was released on 1985 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wind Turbine Aerodynamics and Vorticity Based Methods written by Emmanuel Branlard and published by Springer. This book was released on 2017-04-05 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces the fundamentals of fluid-mechanics, momentum theories, vortex theories and vortex methods necessary for the study of rotors aerodynamics and wind-turbines aerodynamics in particular. Rotor theories are presented in a great level of details at the beginning of the book. These theories include: the blade element theory, the Kutta-Joukowski theory, the momentum theory and the blade element momentum method. A part of the book is dedicated to the description and implementation of vortex methods. The remaining of the book focuses on the study of wind turbine aerodynamics using vortex-theory analyses or vortex-methods. Examples of vortex-theory applications are: optimal rotor design, tip-loss corrections, yaw-models and dynamic inflow models. Historical derivations and recent extensions of the models are presented. The cylindrical vortex model is another example of a simple analytical vortex model presented in this book. This model leads to the development of different BEM models and it is also used to provide the analytical velocity field upstream of a turbine or a wind farm under aligned or yawed conditions. Different applications of numerical vortex methods are presented. Numerical methods are used for instance to investigate the influence of a wind turbine on the incoming turbulence. Sheared inflows and aero-elastic simulations are investigated using vortex methods for the first time. Many analytical flows are derived in details: vortex rings, vortex cylinders, Hill's vortex, vortex blobs etc. They are used throughout the book to devise simple rotor models or to validate the implementation of numerical methods. Several Matlab programs are provided to ease some of the most complex implementations.
Download or read book Vortex Methods Selected Papers Of The First International Conference On Vortex Methods written by Kyoji Kamemoto and published by World Scientific. This book was released on 2000-05-11 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vortex methods have been developed and applied to many kinds of flows related to various problems in wide engineering and scientific fields. The purpose of the First International conference on Vortex methods was to provide an opportunity for engineers and scientists to present their achievements, exchange ideas and discuss new developments in mathematical and physical modeling techniques and engineering applications of vortex methods.
Download or read book Recent Research Advances in the Fluid Mechanics of Turbulent Jets and Plumes written by P.A. Davies and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Challenging problems involvrllg jet and plume phenomena are common to many areas of fundamental and applied scientific research, and an understanding of plume and jet behaviour is essential in many geophysical and industrial contexts. For example, in the field of meteorology, where pollutant dispersal takes place by means of atmospheric jets and plumes formed either naturally under conditions of convectively-driven flow in the atmospheric boundary layer, or anthropogenically by the release of pollutants from tall chimneys. In other fields of geophysics, buoyant plumes and jets are known to play important roles in oceanic mixing processes, both at the relatively large scale (as in deep water formation by convective sinking) and at the relatively small scale (as with plume formation beneath ice leads, for example). In the industrial context, the performances of many engineering systems are determined primarily by the behaviour of buoyant plumes and jets. For example, (i) in sea outfalls, where either sewage or thermal effluents are discharged into marine and/or freshwater environments, (ii) in solar ponds, where buoyant jets are released under density interfaces, (iii) in buildings, where thermally-generated plumes affect the air quality and ventilation properties of architectural environments, (iv) in rotating machinery where fluid jet~ are used for cooling purposes, and (v) in long road and rail tunnels, where safety and ventilation prcedures rely upon an understanding of the behaviour of buoyant jets. In many other engineering and oceanographic contexts, the properties of jets and plumes are of great importance.
Download or read book Vortex wakes of Aircrafts written by A.S. Ginevsky and published by Springer Science & Business Media. This book was released on 2009-07-07 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Investigation of vortex wakes behind various aircraft, especially behind wide bodied and heavy cargo ones, is of both scientific and practical in terest. The vortex wakes shed from the wing’s trailing edge are long lived and attenuate only atdistances of10–12kmbehindthe wake generating aircraft. The encounter of other aircraft with the vortex wake of a heavy aircraft is open to catastrophic hazards. For example, air refueling is adangerous operationpartly due to thepossibility of the receiver aircraft’s encountering the trailing wake of the tanker aircraft. It is very important to know the behavior of vortex wakes of aircraft during theirtakeoff andlanding operations whenthe wakes canpropagate over the airport’s ground surface and be a serious hazard to other depart ing or arriving aircraft. This knowledge can help in enhancing safety of aircraft’s movements in the terminal areas of congested airports where the threat of vortex encounters limits passenger throughput. Theoreticalinvestigations of aircraft vortex wakes arebeingintensively performedinthe major aviationnations.Usedforthispurpose are various methods for mathematical modeling of turbulent flows: direct numerical simulation based on the Navier–Stokes equations, large eddy simulation using the Navier–Stokes equations in combination with subrigid scale modeling, simulation based on the Reynolds equations closed with a differential turbulence model. These approaches are widely used in works of Russian and other countries’ scientists. It should be emphasized that the experiments in wind tunnels and studies of natural vortex wakes behind heavy and light aircraft in flight experiments are equally important.
Download or read book Turbulent Shear Flows 4 written by L.J.S. Bradbury and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth International Symposium on Turbulent Shear Flows took place at Karlsruhe University in Germany. The papers presented at this Symposium encompassed a similar range to that of the previous meetings, with greater emphasis placed on experimental work, and continued a trend towards the examination of complex flows. Once again, three dimensional, recirculating and reacting flows featured strongly in the programme and were complemented by consideration of two-phase flows and discussions of both numerical and experimental techniques. The Symposium brought together some 300 participants from all over the world, and it was evident that there is a need for Turbulent Shear Flows Symposia, in order to obtain and communicate new information useful to researchers in the field of turbulent flows and of interest to engineers who design flow equipment. This volume contains 27 papers selected from more than 100 presentations at the Symposium which have been reviewed and edited before publication. Together they provide an indication of the status of current knowledge on the subjects represented at the Sympo sium. They are grouped into four sections, namely: • Fundamentals • Free Flows • Boundary Layers • Reacting Flows As in previous volumes in this series, each section begins with an introductory article con sidering the papers which follow in the broader context of available literature and current research.
Download or read book Turbulence Numerical Analysis Modelling and Simulation written by William Layton and published by . This book was released on 2018 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence: Numerical Analysis, Modelling and Simulation.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Multiphase Flows with Droplets and Particles written by Clayton T. Crowe and published by CRC Press. This book was released on 1997-11-13 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase flow technology, especially in the area of gas-droplet and gas-particle flows, is increasingly important in the energy and manufacturing industries. Pollution control, pneumatic transport, food processing, combustion, and development of new materials as well as many other engineering applications will benefit from the fundamental engineering design applications and research in this field. Written for graduate students and professionals, Multiphase Flows with Droplets and Particles provides a clear, pedagogical approach to the fundamentals of gas-particle and gas-droplet flows.
