Download or read book Discrete Element Modeling of Tool rock Interaction written by Haiying Huang and published by . This book was released on 1999 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study on discrete element modelling of tool-rock interaction focuses on establishing scaling laws between the pheomenological parameters of a material and the properties of a discrete disc assembly, and on applying the discrete element method to analyze failure mechanisms in indentation and cutting of rocks. The discrete element code PFC2D is employed to carry out this research. The scaling laws are constructed to determine the elastic constants, the compressive and tensile strengths ơc and ơt and the toughness Ktc of the disc assembly from the micro-scale parameters (e.g., contact stiffnesses, shear and normal bond strengths Ts, Tn, etc.). The analysis is conducted using dimensional analysis and numerical uniaxial and biaxial tests. The numerical results indicate that the bond strength ration Ts/Tn, different types of materials such as metals and rocks can be modelled. An analytical expression for the toughness of a regular square packing assembly is derived. The solution can be generalized to the case of an irregular assembly. For a mixed mode of failure involving both damage and crack propagation, the mean particle radius R is imposed by material properties and is lost as a discretization parameter. The identation and cutting processes are then simulated with particle assemblies having rock-like properties. The dual failure mechanism observed in rock indentation and cutting experiments are reproduced in numerical simulations. The numerical tests validate the concept that only a ductible failure is caused by indentation (i.e., no crack initiates as the damaged zone grows) if a scaled flaw length [...] is small. The transition from a ductible to a brittle mode of failure in the cutting process is also controlled by a length, a critical depts of cut d* proportional to (Ktc/ơc)2. The analysic of the contact on the cutter face reveals that a multi-directional flow mechanism exists for the solide ahead of the cutter. Due to the divided flow, the total force inclination on the cutter depends on the rake angle and is not a measure of the interfacial friction angle between the rock and the cutter.
Download or read book The Combined Finite Discrete Element Method written by Antonio A. Munjiza and published by John Wiley & Sons. This book was released on 2004-04-21 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combined finite discrete element method is a relatively new computational tool aimed at problems involving static and / or dynamic behaviour of systems involving a large number of solid deformable bodies. Such problems include fragmentation using explosives (e.g rock blasting), impacts, demolition (collapsing buildings), blast loads, digging and loading processes, and powder technology. The combined finite-discrete element method - a natural extension of both discrete and finite element methods - allows researchers to model problems involving the deformability of either one solid body, a large number of bodies, or a solid body which fragments (e.g. in rock blasting applications a more or less intact rock mass is transformed into a pile of solid rock fragments of different sizes, which interact with each other). The topic is gaining in importance, and is at the forefront of some of the current efforts in computational modeling of the failure of solids. * Accompanying source codes plus input and output files available on the Internet * Important applications such as mining engineering, rock blasting and petroleum engineering * Includes practical examples of applications areas Essential reading for postgraduates, researchers and software engineers working in mechanical engineering.
Download or read book Discrete Element Methods written by Benjamin K. Cook and published by . This book was released on 2002 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Third International Conference on Discrete Element Methods, held in Santa Fe, New Mexico on September 23-25, 2002. This Geotechnical Special Publication contains 72 technical papers on discrete element methods (DEM), a suite of numerical techniques developed to model granular materials, rock, and other discontinua at the grain scale. Topics include: DEM formulation and implementation approaches, coupled methods, experimental validation, and techniques, including three-dimensional particle representations, efficient contact detection algorithms, particle packing schemes, and code design. Coupled methods include approaches to linking solid continuum and fluid models with DEM to simulate multiscale and multiphase phenomena. Applications include fundamental investigations of granular mechanics; micromechanical studies of powder, soil, and rock behavior; and large-scale modeling of geotechnical, material processing, mining, and petroleum engineering problems.
Download or read book Modelling Rock Fracturing Processes written by Baotang Shen and published by Springer Nature. This book was released on 2020-05-06 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the second edition of the well-known textbook Modelling Rock Fracturing Processes. The new and extended edition provides the theoretical background of rock fracture mechanics used for modelling of 2-D and 3-D geomechanics problems and processes. Fundamentals of rock fracture mechanics integrated with experimental studies of rock fracturing processes are highlighted. The computer programs FRACOD 2D and 3D are used to analyse fracture initiation and propagation for the three fracture modes: Mode I, II and III. Coupled fracture modelling with other continuous and distinct element codes including FLAC, PFC, RFPA, TOUGH are also described. A series of applications of fracture modelling with importance for modern society is presented and discussed by distinguished rock fracture modelling experts.
Download or read book Rock Characterisation Modelling and Engineering Design Methods written by Xia-Ting Feng and published by CRC Press. This book was released on 2013-05-17 with total page 931 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Characterisation, Modelling and Engineering Design Methods contains the contributions presented at the 3rd ISRM SINOROCK Symposium (Shanghai, China, 1820 June 2013). The papers contribute to the further development of the overall rock engineering design process through the sequential linkage of the three themes of rock characterisation, model
Download or read book Rock Fracture Mechanics written by Hans-Peter Rossmanith and published by Springer Science & Business Media. This book was released on 1983-10-21 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 7th International Conference on Discrete Element Methods written by Xikui Li and published by Springer. This book was released on 2016-12-01 with total page 1414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest advances in Discrete Element Methods (DEM) and technology. It is the proceeding of 7th International Conference on DEM which was held at Dalian University of Technology on August 1 - 4, 2016. The subject of this book are the DEM and related computational techniques such as DDA, FEM/DEM, molecular dynamics, SPH, Meshless methods, etc., which are the main computational methods for modeling discontinua. In comparison to continua which have been already studied for a long time, the research of discontinua is relatively new, but increases dramatically in recent years and has already become an important field. This book will benefit researchers and scientists from the academic fields of physics, engineering and applied mathematics, as well as from industry and national laboratories who are interested in the DEM.
Download or read book Frank L Di Maggio Symposium on Constitutive Modeling of Geomaterials June 3 5 2002 written by Hoe I. Ling and published by CRC Press. This book was released on 2003-01-23 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientists involved with geomaterial modeling honor the retirement of distinguished colleague Frank L. DiMaggio (civil engineering and engineering mechanics, Columbia U.) by offering contributions representing recent advances in the modeling of sand, clay, and concrete. DiMaggio contributed to the d
Download or read book Interaction Modeling in Mechanized Tunneling written by Günther Meschke and published by Springer Nature. This book was released on 2023-03-17 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book compiles the research results of the Collaborative Research Center SFB 837, which has been running since 2010 and will end in 2022, with the topic "Interaction Modeling in Mechanized Tunneling". The Collaborative Research Center is funded by the German Research Foundation (DFG) and is currently the world's largest research facility in the field of tunneling. The aim of the publication is to make our scientific findings accessible to the international professional community. The individual chapters deal with all subsystems relevant in mechanized tunneling and their interaction. The latest results of digital planning and real-time tunneling support have been included.
Download or read book Computational Granular Mechanics and Its Engineering Applications written by Shunying Ji and published by Springer Nature. This book was released on 2020-03-18 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically introduces readers to computational granular mechanics and its relative engineering applications. Part I describes the fundamentals, such as the generation of irregular particle shapes, contact models, macro-micro theory, DEM-FEM coupling, and solid-fluid coupling of granular materials. It also discusses the theory behind various numerical methods developed in recent years. Further, it provides the GPU-based parallel algorithm to guide the programming of DEM and examines commercial and open-source codes and software for the analysis of granular materials. Part II focuses on engineering applications, including the latest advances in sea-ice engineering, railway ballast dynamics, and lunar landers. It also presents a rational method of parameter calibration and thorough analyses of DEM simulations, which illustrate the capabilities of DEM. The computational mechanics method for granular materials can be applied widely in various engineering fields, such as rock and soil mechanics, ocean engineering and chemical process engineering.
Download or read book Rock Mechanics for Resources Energy and Environment written by Marek Kwasniewski and published by CRC Press. This book was released on 2013-09-11 with total page 995 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emphasis in Rock Mechanics for Resources, Energy and Environment is on the application of rock mechanics to the extraction of natural resources, securing energy supplies and protecting the environment surrounding rock that is subject to engineering activities. The book will be of interest to rock mechanics researchers as well as to professionals who are involved in the various branches of rock engineering.
Download or read book Coupled Thermo Hydro Mechanical Processes in Fractured Rock Masses written by Fengshou Zhang and published by Springer Nature. This book was released on 2023-09-11 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of thermo-hydro-mechanical coupled processes in fractured rock masses has close relevance to energy-related deep earth engineering activities, such as enhanced geothermal systems, geological disposal of radioactive waste, sequestration of CO2, long-term disposal of waste water and recovery of hydrocarbons from unconventional reservoirs. Despite great efforts by engineers and researchers, comprehensive understanding of the thermo-hydro-mechanical coupled processes in fractured rock mass remains a great challenge. The discrete element method (DEM), originally developed by Dr. Peter Cundall, has become widely used for the modeling of a rock mass, including its deformation, damage, fracturing and stability. DEM modeling of the coupled thermo-hydro-mechanical processes in fractured rock masses can provide some unique insights, to say the least, for better understanding of those complex issues. The authors of this book have participated in various projects involving DEM modeling of coupled thermo-hydro-mechanical processes during treatment of a rock mass by fluid injection and/or extraction and have provided consulting services to some of the largest oil-and-gas companies in the world. The breadth and depth of our engineering expertise are reflected by its successful applications in the major unconventional plays in the world, including Permian, Marcellus, Bakken, Eagle Ford, Horn River, Chicontepec, Sichuan, Ordos and many more. The unique combination of the state-of-the-art numerical modeling techniques with state-of-the-practice engineering applications makes the presented material relevant and valuable for engineering practice. We believe that it is beneficial to share the advances on this subject and promote some further development.
Download or read book Analytical Methods in Petroleum Upstream Applications written by Cesar Ovalles and published by CRC Press. This book was released on 2015-04-02 with total page 2054 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective measurement of the composition and properties of petroleum is essential for its exploration, production, and refining; however, new technologies and methodologies are not adequately documented in much of the current literature. Analytical Methods in Petroleum Upstream Applications explores advances in the analytical methods and instrumentation that allow more accurate determination of the components, classes of compounds, properties, and features of petroleum and its fractions. Recognized experts explore a host of topics, including: A petroleum molecular composition continuity model as a context for other analytical measurements A modern modular sampling system for use in the lab or the process area to collect and control samples for subsequent analysis The importance of oil-in-water measurements and monitoring The chemical and physical properties of heavy oils, their fractions, and products from their upgrading Analytical measurements using gas chromatography and nuclear magnetic resonance (NMR) applications Asphaltene and heavy ends analysis Chemometrics and modeling approaches for understanding petroleum composition and properties to improve upstream, midstream, and downstream operations Due to the renaissance of gas and oil production in North America, interest has grown in analytical methods for a wide range of applications. The understanding provided in this text is designed to help chemists, geologists, and chemical and petroleum engineers make more accurate estimates of the crude value to specific refinery configurations, providing insight into optimum development and extraction schemes.
Download or read book Particulate Discrete Element Modelling written by Catherine O'Sullivan and published by CRC Press. This book was released on 2011-04-06 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first single work on DEM providing the information to get started with this powerful numerical modelling approach. Provides the basic details of the numerical method and the approaches used to interpret the results of DEM simulations. It will be of use to professionals, researchers and higher level students, with a theoretical overview of DEM as well as practical guidance.Selected Contents: 1.Introduction 2.Use of DEM in Geomechanics 3.Calculation of Contact Forces 4.Particle Motion 5.Particle Types 6.Boundary Conditions 7.Initial Geometry and Specimen Generation 8.Time Integration and Discrete Element Modelling 9.DEM Interpretation: A Continuum Perspective 10.Postprocessing: Graphical Interpretation of DEM Simulations 11.Basic Statisti
Download or read book Numerical Modeling in Micromechanics via Particle Methods 2004 written by Y. Shimizu and published by CRC Press. This book was released on 2004-09-15 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: The variety of applications of PFC has continued to increase in the ten years since the first release of these programs. This volume contains a collection of fifty-two papers selected for presentation at the 2nd PFC Symposium, held 27-29 October 2004, in Kyoto, Japan. These contributions cover a wide range of engineering applications and theoretical developments using PFC, and discrete methods in general. Topics include applications in civil engineering, slope and wall stability, rock fracture, shear flows, geology and industrial engineering. New developments are also described for contact bond models, fluid coupling and model calibration. This proceedings volume illustrates the great variety of PFC applications in different engineering fields, and includes case-studies and general applications as well as research presentations.
Download or read book Micromechanics of Granular Materials written by Bernard Cambou and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nearly all solids are compised of grains. However most studies treat materials as a continious solid. The book applies analysis used on loose granular materials to dense grainular materials. This title’s main focus is devoted to static or dynamic loadings applied to dense materials, although rapid flows and widely dispersed media are also mentioned briefly. Three essential areas are covered: Local variable analysis: Contact forces, displacements and rotations, orientation of contacting particles and fabric tensors are all examples of local variables. Their statistical distributions, such as spatial distribution and possible localization, are analyzed, taking into account experimental results or numerical simulations. Change of scales procedures: Also known as “homogenization techniques”, these procedures make it possible to construct continuum laws to be used in a continuum mechanics approach or performing smaller scale analyses. Numerical modeling: Several methods designed to calculate approximate solutions of dynamical equations together with unilateral contact and frictional laws are presented, including molecular dynamics, the distinct element method and non-smooth contact dynamics. Numerical examples are given and the quality of numerical approximations is discussed.
Download or read book Rock Anisotropy Fracture and Earthquake Assessment written by Yong-Gang Li and published by Walter de Gruyter GmbH & Co KG. This book was released on 2016-02-22 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph provides an up-to-date overview on methods and techniques in seismology, with a focus on describing and detecting seismic waves in anisotropic media. The author discusses structural, physical and mechanical aspects of the crust by analyzing earthquake data from field studies, rendering the book a practical reference for researchers in seismology and applied geophysics. Contents: Rock Anisotropy, Fracture and Earthquake Assessment Seismic Wave Propagation in Anisotropic Rocks with Applications to Defining Fractures in Earth Crust Reproducing the Realistic Compressive-tensile Strength Ratio of Rocks using Discrete Element Model Rock Fracture under Static and Dynamic Stress Multiple Linear Regression Analyses on the Relationships among Magnitude, Rupture Length, Rupture Width, Rupture Area, and Surface Displacement PI Algorithm Applied to the Sichuan-Yunnan Region: A Statistical Physics Method for Intermediate-term Medium-range Earthquake Forecast in Continental China Probabilistic Seismic Hazard Assessment for Pacific Island Countries
