Download or read book Direct Models of Polymers Interfaces and Clusters written by V. Privman and published by . This book was released on 1989 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Enterprise Collaboration written by David M. Levermore and published by Springer. This book was released on 2008-11-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book goes beyond the discussion of global databases and presents a general Enterprise Resources Market model to facilitate the management and integration of enterprise information resources in a cooperating mode. It is the first book to analyze the problem from the perspective of information management and to present a solution for a key aspect of the cooperation problem—on-demand information exchange.
Download or read book Modeling the Electrochemo poromechanics of Ionic Polymer Metal Composites and Cell Clusters written by Alessandro Leronni and published by Springer Nature. This book was released on 2022-01-03 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a novel continuum finite deformation framework addressing the complex interactions among electrostatics, species transport, and mechanics in solid networks immersed in a fluid phase of solvent and ions. Grounded on cutting-edge multiphysics theories for soft active materials, the proposed model is primarily applied to ionic polymer metal composites (IPMCs). First, the influence of shear deformation on the IPMC response is analyzed through semi-analytical solutions obtained via the method of matched asymptotic expansions. Second, the novel electrochemo-poromechanical theory is used to predict the curvature relaxation and electric discharge that are observed in IPMC actuation and sensing, respectively, under a sustained stimulus. This newly formulated theory is, in turn, applied to biological cell clusters. Here, important mechanical considerations are integrated into classical bioelectrical models, thus offering novel insights into the interplay of mechanical and electrical signaling in the coordination of developmental processes.
Download or read book Physical Review written by and published by . This book was released on 1995-12 with total page 1258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publishes papers that report results of research in statistical physics, plasmas, fluids, and related interdisciplinary topics. There are sections on (1) methods of statistical physics, (2) classical fluids, (3) liquid crystals, (4) diffusion-limited aggregation, and dendritic growth, (5) biological physics, (6) plasma physics, (7) physics of beams, (8) classical physics, including nonlinear media, and (9) computational physics.
Download or read book Complex Plasmas written by Michael Bonitz and published by Springer Science & Business Media. This book was released on 2014-04-09 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with an introduction to the physics of complex plasmas, a discussion of the specific scientific and technical challenges they present and an overview of their potential technological applications. Complex plasmas differ from conventional high-temperature plasmas in several ways: they may contain additional species, including nano meter- to micrometer-sized particles, negative ions, molecules and radicals and they may exhibit strong correlations or quantum effects. This book introduces the classical and quantum mechanical approaches used to describe and simulate complex plasmas. It also covers some key experimental techniques used in the analysis of these plasmas, including calorimetric probe methods, IR absorption techniques and X-ray absorption spectroscopy. The final part of the book reviews the emerging applications of microcavity and microchannel plasmas, the synthesis and assembly of nanomaterials through plasma electrochemistry, the large-scale generation of ozone using microplasmas and novel applications of atmospheric-pressure non-thermal plasmas in dentistry. Going beyond the scope of traditional plasma texts, the presentation is very well suited for senior undergraduate, graduate students and postdoctoral researchers specializing in plasma physics.
Download or read book Polymer solid Interfaces written by ICPSI and published by . This book was released on 1996 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interface Interphase in Polymer Nanocomposites written by Anil N. Netravali and published by John Wiley & Sons. This book was released on 2016-11-29 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant research has been done in polymeric nanocomposites and progress has been made in understanding nanofiller-polymer interface and interphase and their relation to nanocomposite properties. However, the information is scattered in many different publication media. This is the first book that consolidates the current knowledge on understanding, characterization and tailoring interfacial interactions between nanofillers and polymers by bringing together leading researchers and experts in this field to present their cutting edge research. Eleven chapters authored by senior subject specialists cover topics including: Thermodynamic mechanisms governing nanofiller dispersion, engineering of interphase with nanofillers Role of interphase in governing the mechanical, electrical, thermal and other functional properties of nanocomposites, characterization and modelling of the interphase Effects of crystallization on the interface, chemical and physical techniques for surface modification of nanocellulose reinforcements Electro-micromechanical and nanoindentation techniques for interface evaluation, molecular dynamics (MD) simulations to quantify filler-matrix adhesion and nanocomposite mechanical properties.
Download or read book Advanced ESR Methods in Polymer Research written by Shulamith Schlick and published by John Wiley & Sons. This book was released on 2006-10-06 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: A definitive work on ESR and polymer science by today's leading authorities The past twenty years have seen extraordinary advances in electron spin resonance (ESR) techniques, particularly as they apply to polymeric materials. With contributions from over a dozen of the world's top polymer scientists, Advanced ESR Methods in Polymer Research is the first book to bring together all the current trends in this exciting field into one comprehensive reference. Part I establishes the fundamentals of ESR, from experimental techniques to data analysis, and serves as a valuable overview for the beginning ESR student. Part II introduces the broad range of ESR applications to polymeric systems, including living radical polymerization, block copoly-mers, polymer solutions, ion-containing polymers, polymer lattices, membranes in fuel cells, degradation, polymer coatings, dendrimers, and conductive polymers. By exposing readers to the great potential of ESR, the authors hope to encourage more extensive application of these methods.
Download or read book Virtual Testing and Predictive Modeling written by Bahram Farahmand and published by Springer Science & Business Media. This book was released on 2009-06-29 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thematerialsusedinmanufacturingtheaerospace,aircraft,automobile,andnuclear parts have inherent aws that may grow under uctuating load environments during the operational phase of the structural hardware. The design philosophy, material selection, analysis approach, testing, quality control, inspection, and manufacturing are key elements that can contribute to failure prevention and assure a trouble-free structure. To have a robust structure, it must be designed to withstand the envir- mental load throughout its service life, even when the structure has pre-existing aws or when a part of the structure has already failed. If the design philosophy of the structure is based on the fail-safe requirements, or multiple load path design, partial failure of a structural component due to crack propagation is localized and safely contained or arrested. For that reason, proper inspection technique must be scheduled for reusable parts to detect the amount and rate of crack growth, and the possible need for repairing or replacement of the part. An example of a fail-sa- designed structure with crack-arrest feature, common to all aircraft structural parts, is the skin-stiffened design con guration. However, in other cases, the design p- losophy has safe-life or single load path feature, where analysts must demonstrate that parts have adequate life during their service operation and the possibility of catastrophic failure is remote. For example, all pressurized vessels that have single load path feature are classi ed as high-risk parts. During their service operation, these tanks may develop cracks, which will grow gradually in a stable manner.
Download or read book Metallized Plastics 2 written by K.L. Mittal and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the Second Symposium on Metallized Plastics: Fundamental and Applied Aspects held under the aegis of the Dielectric Science and Technology Division of the Electrochemical Society in Montreal, Canada, May 7-10, 1990. The first symposium on this topic was held in Chicago, October 10-12, 1988 and the proceedings of l which have been chronicled in a hard-bound volume l As pointed out in the Preface to the proceedings of the first symposium the metallized plastics find scores of applications ranging from very mundane to very sophisticated. Even a cursory look at the literature will convince that this field has sprouted; and there is every reason to believe that with all the research and development activities taking place, new and exciting applications of metallized plastics will emerge. The program for the second symposium was very comprehensive as it included 46 papers covering many aspects of metallized plastics. This symposium was a testimonial to the brisk research activity and keen interest in the topic of metallized plastics. The success of this symposium reinforced our earlier belief that there was a definite need to hold symposia on this topic on a regular basis. Concomitantly, the third symposium in this vein was held in Phoenix, Arizona, October 13-18, 1991 and the fourth is planned for May 16-21, 1993 in Honolulu, Hawaii. As regards the present volume, it contains a total of 35 papers covering a variety of topics ranging from very fundamental to very applied.
Download or read book Reliability of Organic Compounds in Microelectronics and Optoelectronics written by Willem Dirk van Driel and published by Springer Nature. This book was released on 2022-01-31 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide a comprehensive reference into the critical subject of failure and degradation in organic materials, used in optoelectronics and microelectronics systems and devices. Readers in different industrial sectors, including microelectronics, automotive, lighting, oil/gas, and petrochemical will benefit from this book. Several case studies and examples are discussed, which readers will find useful to assess and mitigate similar failure cases. More importantly, this book presents methodologies and useful approaches in analyzing a failure and in relating a failure to the reliability of materials and systems.
Download or read book Handbook of Industrial Chemistry and Biotechnology written by James A. Kent and published by Springer. This book was released on 2017-08-01 with total page 2217 pages. Available in PDF, EPUB and Kindle. Book excerpt: This widely respected and frequently consulted reference work provides a wealth of information and guidance on industrial chemistry and biotechnology. Industries covered span the spectrum from salt and soda ash to advanced dyes chemistry, the nuclear industry, the rapidly evolving biotechnology industry, and, most recently, electrochemical energy storage devices and fuel cell science and technology. Other topics of surpassing interest to the world at large are covered in chapters on fertilizers and food production, pesticide manufacture and use, and the principles of sustainable chemical practice, referred to as green chemistry. Finally, considerable space and attention in the Handbook are devoted to the subjects of safety and emergency preparedness. It is worth noting that virtually all of the chapters are written by individuals who are embedded in the industries whereof they write so knowledgeably.
Download or read book Modeling and Diagnostics of Polymer Electrolyte Fuel Cells written by Ugur Pasaogullari and published by Springer Science & Business Media. This book was released on 2010-07-23 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, presented by leading experts in the field, covers the latest advances in diagnostics and modeling of polymer electrolyte fuel cells, from understanding catalyst layer durability to start-up under freezing conditions.
Download or read book Handbook of Computational Chemistry written by Jerzy Leszczynski and published by Springer Science & Business Media. This book was released on 2012-01-14 with total page 1451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is a guide to current methods of computational chemistry, explaining their limitations and advantages and providing examples of their applications. The first part outlines methods, the balance of volumes present numerous important applications.
Download or read book Hybrid Organic Inorganic Interfaces written by Marie Helene Delville and published by John Wiley & Sons. This book was released on 2018-04-09 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt: Das erste Handbuch und gut zugängliche Referenzwerk zu diesem zunehmend wichtigen Thema erläutert in einem anwendungsorientierten Ansatz Synthese, Design, Charakterisierung und Simulation von Grenzflächen bei hybriden organisch-anorganischen Materialien.
Download or read book The Random Cluster Model written by Geoffrey R. Grimmett and published by Springer Science & Business Media. This book was released on 2006-12-13 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: The random-cluster model has emerged as a key tool in the mathematical study of ferromagnetism. It may be viewed as an extension of percolation to include Ising and Potts models, and its analysis is a mix of arguments from probability and geometry. The Random-Cluster Model contains accounts of the subcritical and supercritical phases, together with clear statements of important open problems. The book includes treatment of the first-order (discontinuous) phase transition.
Download or read book Handbook of Polymer Research written by Gennadii Efremovich Zaikov and published by Nova Publishers. This book was released on 2006 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are substances containing a large number of structural units joined by the same type of linkage. These substances often form into a chain-like structure. Starch, cellulose, and rubber all possess polymeric properties. Today, the polymer industry has grown to be larger than the aluminium, copper and steel industries combined. Polymers already have a range of applications that far exceeds that of any other class of material available to man. Current applications extend from adhesives, coatings, foams, and packaging materials to textile and industrial fibres, elastomers, and structural plastics. Polymers are also used for most composites, electronic devices, biomedical devices, optical devices, and precursors for many newly developed high-tech ceramics. This new volume presents leading-edge research in this rapidly-changing and evolving field.
