Download or read book Digital Modulation and Coding written by Stephen G. Wilson and published by Pearson. This book was released on 1996 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers all important topics in digital transmission at the intuitive level of physical systems. The presentation attempts to bridge the gap between communication practice and theory, emphasizing the interplay between modulation and coding and their receiver counterparts. KEY TOPICS: Emphasizes the engineering tradeoffs in signal design, energy and spectral properties of modulation choices, and receiver design aspects including synchronization. Presents expanded material on lattices and block coding theory and applications. Reed-Solomon and BCH encoding and decoding algorithms are treated at length along with applications to bandlimited Gaussian channels and fading channels.
Download or read book Digital Communications written by Dr. J. S. Chitode and published by Technical Publications. This book was released on 2020-12-01 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are eight chapters, useful appendix and solved question papers in the book. Basic digital communication, line codes and sampling methods are presented at the beginning. Digital pulse modulation techniques such as PCM, DPCM, DM, ADM are presented. Continuous wave digital modulation methods such as BPSK, DPSK, QPSK, QAM, BFSK and OOK are presented with mathematical analysis of modulators and receivers. Issues related to baseband transmission such as ISI, Nyquist pulse shaping criterian, optimum reception, matched filter and eye patterns are also discussed. Concepts of information theory such as discrete memoryless channels, mutual information, shannon's theorems on source coding are also presented. Coding using linear block codes, cyclic codes and convolutional coding is also discussed. Secured communication using spread spectrum modulation is also discussed in detail.
Download or read book Modulation and Coding Techniques in Wireless Communications written by Evgenii Krouk and published by John Wiley & Sons. This book was released on 2011-02-21 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: The high level of technical detail included in standards specifications can make it difficult to find the correlation between the standard specifications and the theoretical results. This book aims to cover both of these elements to give accessible information and support to readers. It explains the current and future trends on communication theory and shows how these developments are implemented in contemporary wireless communication standards. Examining modulation, coding and multiple access techniques, the book is divided into two major sections to cover these functions. The two-stage approach first treats the basics of modulation and coding theory before highlighting how these concepts are defined and implemented in modern wireless communication systems. Part 1 is devoted to the presentation of main L1 procedures and methods including modulation, coding, channel equalization and multiple access techniques. In Part 2, the uses of these procedures and methods in the wide range of wireless communication standards including WLAN, WiMax, WCDMA, HSPA, LTE and cdma2000 are considered. An essential study of the implementation of modulation and coding techniques in modern standards of wireless communication Bridges the gap between the modulation coding theory and the wireless communications standards material Divided into two parts to systematically tackle the topic - the first part develops techniques which are then applied and tailored to real world systems in the second part Covers special aspects of coding theory and how these can be effectively applied to improve the performance of wireless communications systems
Download or read book Coding and Modulation for Digital Television written by Gordon M. Drury and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coding and Modulation for Digital Television presents a comprehensive description of all error control coding and digital modulation techniques used in Digital Television (DTV). This book illustrates the relevant elements from the expansive theory of channel coding to how the transmission environment dictates the choice of error control coding and digital modulation schemes. These elements are presented in such a way that both the `mathematical integrity' and `understanding for engineers' are combined in a complete form and supported by a number of practical examples. In addition, the book contains descriptions of the existing standards and provides a valuable source of corresponding references. Coding and Modulation for Digital Television also features a description of the latest techniques, providing the reader with a glimpse of future digital broadcasting. These include the concepts of soft-in-soft-out decoding, turbo-coding and cross-correlated quadrature modulation, all of which will have a prominent future in improving efficiency of the next generation DTV systems. Coding and Modulation for Digital Television is essential reading for all undergraduate and postgraduate students, broadcasting and communication engineers, researchers, marketing managers, regulatory bodies, governmental organizations and standardization institutions of the digital television industry.
Download or read book Modulation and Coding written by Alister Burr and published by Prentice Hall PTR. This book was released on 2001 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface. Abbreviations. 1. Introduction to modulation and coding. 2. Principles of linear modulation. 3. Modulation for non-linear systems. 4. Modem design. 5. Principles of FEC Coding. 6. Cyclic block codes. 7. Convolutionals codes. 8. Coded modulation. 9. Modulation and coding on multipath channels. 10. OFDM. 11. Turbo-codes. Appendix 1. Finite field theory. Appendix 2. The MAP algorithm.
Download or read book Digital Modulation Techniques written by Fuqin Xiong and published by Artech House Publishers. This book was released on 2006 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt: This newly revised and expanded edition of an Artech House classic builds on its success as far and away the most comprehensive guide to digital modulation techniques used in communications today. The second edition adds a wealth of up-to-date, critical material, including: Five new chapters devoted to orthogonal frequency division multiplexing (OFDM) covering its basics and practical implementation issues: peak-to-average power ratio (PAPR) reduction, synchronization, fading channel performance, and mitigation methods, as well as the newest developments such as wavelet OFDM schemes; New modulations for optical communications; Enhanced coverage of M-ary amplitude shift keying (ASK); More accurate bit error rate (BER) equations for quaternary phase shift keying (QPSK) and quadrature amplitude modulation (QAM); Enhanced coverage of fading channel mitigation methods such as channel estimate and diversity techniques; Fast-access comparison of all modulation schemes; New appendixes covering trigonometry identities, Fourier transform pairs and properties, and Q-function and error function values.
Download or read book Coded Modulation Systems written by John B. Anderson and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coded Modulation Systems is an introduction to the subject of coded modulation in digital communication. It is designed for classroom use and for anyone wanting to learn the ideas behind this modern kind of coding. Coded modulation is signal encoding that takes into account the nature of the channel over which it is used. Traditional error correcting codes work with bits and add redundant bits in order to correct transmission errors. In coded modulation, continuous time signals and their phases and amplitudes play the major role. The coding can be seen as a patterning of these quantities. The object is still to correct errors, but more fundamentally, it is to conserve signal energy and bandwidth at a given error performance. The book divides coded modulation into three major parts. Trellis coded modulation (TCM) schemes encode the points of QAM constellations; lattice coding and set-partition techniques play major roles here. Continuous-phase modulation (CPM) codes encode the signal phase, and create constant envelope RF signals. The partial-response signaling (PRS) field includes intersymbol interference problems, signals generated by real convolution, and signals created by lowpass filtering. In addition to these topics, the book covers coding techniques of several kinds for fading channels, spread spectrum and repeat-request systems. The history of the subject is fully traced back to the formative work of Shannon in 1949. Full explanation of the basics and complete homework problems make the book ideal for self-study or classroom use.
Download or read book Digital Modulation and Coding Design for Wireless Channels written by Kyuhyoun Patk and published by . This book was released on 1995 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Error Correction Coding for Digital Communications written by George C. Clark Jr. and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Error-correction coding is being used on an almost routine basis in most new communication systems. Not only is coding equipment being used to increase the energy efficiency of communication links, but coding ideas are also providing innovative solutions to many related communication problems. Among these are the elimination of intersymbol interference caused by filtering and multipath and the improved demodulation of certain frequency modulated signals by taking advantage of the "natural" coding provided by a continuous phase. Although several books and nu merous articles have been written on coding theory, there are still noticeable deficiencies. First, the practical aspects of translating a specific decoding algorithm into actual hardware have been largely ignored. The information that is available is sketchy and is widely dispersed. Second, the information required to evaluate a particular technique under situations that are en countered in practice is available for the most part only in private company reports. This book is aimed at correcting both of these problems. It is written for the design engineer who must build the coding and decoding equipment and for the communication system engineer who must incorporate this equipment into a system. It is also suitable as a senior-level or first-year graduate text for an introductory one-semester course in coding theory. The book U"Ses a minimum of mathematics and entirely avoids the classical theorem/proof approach that is often seen in coding texts.
Download or read book Introduction to Analog and Digital Communication written by M. A. Bhagyaveni and published by CRC Press. This book was released on 2022-09-01 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book primarily focuses on the design of analog and digital communication systems; and has been structured to cater to the second year engineering undergraduate students of Computer Science, Information Technology, Electrical Engineering and Electronics and Communication departments. For better understanding, the basics of analog communication systems are outlined before the digital communication systems section. The content of this book is also suitable for the students with little knowledge in communication systems. The book is divided into five modules for efficient presentation, and it provides numerous examples and illustrations for the detailed understanding of the subject, in a thorough manner.
Download or read book Digital Communications written by Simon Haykin and published by New York ; Toronto : Wiley. This book was released on 1988-03-08 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering comprehensive, up-to-date coverage on the principles of digital communications, this book focuses on basic issues, relating theory to practice wherever possible. Topics covered include the sampling process, digital modulation techniques and error-control coding.
Download or read book Principles of Digital Communication and Coding written by Andrew J. Viterbi and published by Courier Corporation. This book was released on 2013-04-22 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by two distinguished experts in the field of digital communications, this classic text remains a vital resource three decades after its initial publication. Its treatment is geared toward advanced students of communications theory and to designers of channels, links, terminals, modems, or networks used to transmit and receive digital messages. The three-part approach begins with the fundamentals of digital communication and block coding, including an analysis of block code ensemble performance. The second part introduces convolutional coding, exploring ensemble performance and sequential decoding. The final section addresses source coding and rate distortion theory, examining fundamental concepts for memoryless sources as well as precepts related to memory, Gaussian sources, and universal coding. Appendixes of useful information appear throughout the text, and each chapter concludes with a set of problems, the solutions to which are available online.
Download or read book Digital Phase Modulation written by John B. Anderson and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last ten years have seen a great flowering of the theory of digital data modulation. This book is a treatise on digital modulation theory, with an emphasis on these more recent innovations. It has its origins in a collabor ation among the authors that began in 1977. At that time it seemed odd to us that the subjects of error-correcting codes and data modulation were so separated; it seemed also that not enough understanding underlay the mostly ad hoc approaches to data transmission. A great many others were intrigued, too, and the result was a large body of new work that makes up most of this book. Now the older disciplines of detection theory and coding theory have been generalized and applied to the point where it is hard to tell where these end and the theories of signal design and modulation begin. Despite our emphasis on the events of the last ten years, we have included all the traditional topics of digital phase modulation. Signal space concepts are developed, as are simple phase-shift-keyed and pulse-shaped modulations; receiver structures are discussed, from the simple linear receiver to the Viterbi algorithm; the effects of channel filtering and of hardlimiting are described. The volume thus serves well as a pedagogical book for research engineers in industry and second-year graduate students in communications engineering. The production of a manageable book required that many topics be left out.
Download or read book Modulation and Coding Techniques in Wireless Communications written by Evgenii Krouk and published by John Wiley & Sons. This book was released on 2011-01-19 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: The high level of technical detail included in standards specifications can make it difficult to find the correlation between the standard specifications and the theoretical results. This book aims to cover both of these elements to give accessible information and support to readers. It explains the current and future trends on communication theory and shows how these developments are implemented in contemporary wireless communication standards. Examining modulation, coding and multiple access techniques, the book is divided into two major sections to cover these functions. The two-stage approach first treats the basics of modulation and coding theory before highlighting how these concepts are defined and implemented in modern wireless communication systems. Part 1 is devoted to the presentation of main L1 procedures and methods including modulation, coding, channel equalization and multiple access techniques. In Part 2, the uses of these procedures and methods in the wide range of wireless communication standards including WLAN, WiMax, WCDMA, HSPA, LTE and cdma2000 are considered. An essential study of the implementation of modulation and coding techniques in modern standards of wireless communication Bridges the gap between the modulation coding theory and the wireless communications standards material Divided into two parts to systematically tackle the topic - the first part develops techniques which are then applied and tailored to real world systems in the second part Covers special aspects of coding theory and how these can be effectively applied to improve the performance of wireless communications systems
Download or read book Review Of Digital Communication written by J. Das and published by New Age International. This book was released on 2003 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: With The Global Trends In Communication And Data Networks, Leading To Idn And Isdn, There Is A Special Need For A Comprehensive Book On Thestate-Of-The-Art In Digital Communication. In The Absence Of Such A Reference Book, Most Of Our Senior Professionals And Academics Find It Very Hard To Keep Themselves Abreast Of The Recent Developments Leading To Information Revolution And Digital Revolution. The Present Volume Is An Attempt To Fill This Gap.The Book Consists Of Ten Chapters, And Discusses Such Topics As, Principles Of Digital Modulation, Source Encoding, Data Transmission Through Cables And Optical Fibres, Digital Radio Including Satellite Communication, Data Networks And Digital Switching, Information Theory And Coding, Survival Of Communication Including Spread Spectrum Techniques, And Future Trends Including Isdn. Conceptually The Chapters Attempt To Discuss From A System Point Of View, A Total Digital Communication Network, E.G., Idn, And The Total Range Of Signal Processing Techniques Has Been Presented In Subsequent Chapters, Thus Maintaining A Continuity Of Thought From End-To-End.The Book Is, Therefore, Addressed To Both Professionals In Telecommunications And Senior Students In This Area.
Download or read book Principles of Digital Communication written by Robert G. Gallager and published by Cambridge University Press. This book was released on 2008-02-28 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The renowned communications theorist Robert Gallager brings his lucid writing style to the study of the fundamental system aspects of digital communication for a one-semester course for graduate students. With the clarity and insight that have characterized his teaching and earlier textbooks, he develops a simple framework and then combines this with careful proofs to help the reader understand modern systems and simplified models in an intuitive yet precise way. A strong narrative and links between theory and practice reinforce this concise, practical presentation. The book begins with data compression for arbitrary sources. Gallager then describes how to modulate the resulting binary data for transmission over wires, cables, optical fibers, and wireless channels. Analysis and intuitive interpretations are developed for channel noise models, followed by coverage of the principles of detection, coding, and decoding. The various concepts covered are brought together in a description of wireless communication, using CDMA as a case study.
Download or read book Digital Communications Fundamentals Applications 2 E written by Sklar and published by Pearson Education India. This book was released on 2009-09 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt: