Download or read book Image Correlation for Shape Motion and Deformation Measurements written by Michael A. Sutton and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Image Correlation for Shape, Motion and Deformation Measurements provides a comprehensive overview of data extraction through image analysis. Readers will find and in-depth look into various single- and multi-camera models (2D-DIC and 3D-DIC), two- and three-dimensional computer vision, and volumetric digital image correlation (VDIC). Fundamentals of accurate image matching are described, along with presentations of both new methods for quantitative error estimates in correlation-based motion measurements, and the effect of out-of-plane motion on 2D measurements. Thorough appendices offer descriptions of continuum mechanics formulations, methods for local surface strain estimation and non-linear optimization, as well as terminology in statistics and probability. With equal treatment of computer vision fundamentals and techniques for practical applications, this volume is both a reference for academic and industry-based researchers and engineers, as well as a valuable companion text for appropriate vision-based educational offerings.
Download or read book Digital Image Correlation written by David Chambers and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: During surface deformations measurements in objects, materials or structural element samples, which move in the space, recorded speckle images are transformed by these displacements. In Chapter One, an algorithm for speckle image relative geometrical transformations parameters determination is proposed on the basis of Fourier-Mellin transform. Usage of this algorithm will allow increasing reliability of deformation fields determination for constructional materials after appropriate correction of speckle-images, which are used during calculations. In Chapter Two, methods are presented to determine forming limit curves (FLCs) for sheets of advanced high strength steels (AHSS) using digital image correlation (DIC). FLC is a valuable tool for failure prediction in forming simulation at design stage and die try-out in press shops. Chapter Three presents a novel algorithm for recovering the trajectories of mechanism components from high speed video by means of multidimensional simplex optimisation and conformal templates. The focus of this chapter is on a simplex-based approach to digital image correlation (DIC) with arbitrarily shaped subsets that provides a number of advantages over the traditional gradient based approach with strictly square subsets. Finally, Chapter Four aims to develop a different technique that allows the obtention of the stress-strain evolution of materials while they are under axial loads.
Download or read book Springer Handbook of Experimental Solid Mechanics written by William N. Sharpe, Jr. and published by Springer Science & Business Media. This book was released on 2008-12-04 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Handbook of Experimental Solid Mechanics documents both the traditional techniques as well as the new methods for experimental studies of materials, components, and structures. The emergence of new materials and new disciplines, together with the escalating use of on- and off-line computers for rapid data processing and the combined use of experimental and numerical techniques have greatly expanded the capabilities of experimental mechanics. New exciting topics are included on biological materials, MEMS and NEMS, nanoindentation, digital photomechanics, photoacoustic characterization, and atomic force microscopy in experimental solid mechanics. Presenting complete instructions to various areas of experimental solid mechanics, guidance to detailed expositions in important references, and a description of state-of-the-art applications in important technical areas, this thoroughly revised and updated edition is an excellent reference to a widespread academic, industrial, and professional engineering audience.
Download or read book Mechanical Characterization Using Digital Image Correlation written by Matthias Merzkirch and published by Springer Nature. This book was released on 2021-12-14 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, a precise treatment of the experimental characterization of advanced composite materials using Digital Image Correlation (DIC) is presented. The text explains test methods, testing setup with 2D- and stereo-DIC, specimen preparation and patterning, testing analysis and data reduction schemes to determine and to compare mechanical properties, such as modulus, strength and fracture toughness of advanced composite materials. Sensitivity and uncertainty studies on the DIC calculated data and mechanical properties for a detailed engineering-based understanding are covered instead of idealized theories and sugarcoated results. The book provides students, instructors, researchers and engineers in industrial or government institutions, and practitioners working in the field of experimental/applied structural mechanics of materials a myriad of color figures from DIC measurements for better explanation, datasets of material properties serving as input parameters for analytical modelling, raw data and computer codes for data reduction, illustrative graphs for teaching purposes, practice exercises with solutions provided online and extensive references to the literature at the end of each stand-alone chapter.
Download or read book Computer Vision Computer Graphics Collaboration Techniques written by André Gagalowicz and published by Springer Science & Business Media. This book was released on 2009-04-22 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 4th International Conference on Computer Vision/Computer Graphics Collaboration Techniques, MIRAGE 2009, held in Rocquencourt, France, in May 2009. The 41 revised full papers presented were carefully reviewed and selected from a total of 83 submissions. The papers cover a wide range of topics with focus on Computer Vision/Computer Graphics collaboration techniques involving image analysis/synthesis approaches especially concerning theoretical, computational, experimental or industrial aspects of model-based image analysis and image-based model synthesis.
Download or read book Remote Sensing Digital Image Analysis written by John A. Richards and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the widespread availability of satellite and aircraft remote sensing image data in digital form, and the ready access most remote sensing practitioners have to computing systems for image interpretation, there is a need to draw together the range of digital image processing procedures and methodologies commonly used in this field into a single treatment. It is the intention of this book to provide such a function, at a level meaningful to the non-specialist digital image analyst, but in sufficient detail that algorithm limitations, alternative procedures and current trends can be appreciated. Often the applications specialist in remote sensing wishing to make use of digital processing procedures has had to depend upon either the mathematically detailed treatments of image processing found in the electrical engineering and computer science literature, or the sometimes necessarily superficial treatments given in general texts on remote sensing. This book seeks to redress that situation. Both image enhancement and classification techniques are covered making the material relevant in those applications in which photointerpretation is used for information extraction and in those wherein information is obtained by classification.
Download or read book International Digital Imaging Correlation Society written by Michael Sutton and published by Springer. This book was released on 2017-03-30 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection represents a single volume of technical papers presented at the Annual International DIC Society Conference and SEM Fall Conference organized by the Society for Experimental Mechanics and Sandia National Laboratories and held in Philadelphia, PA, November 7-10, 2016. The volume presents early findings from experimental, standards development and various other investigations concerning digital image correlation - an important area within Experimental Mechanics. The area of Digital Image Correlation has been an integral track within the SEM Annual Conference spearheaded by Professor Michael Sutton from the University of South Carolina. In 2016, the SEM and Sandia joined their collaborative strengths to launch a standing fall meeting focusing specifically on developments in the area of Digital Image Correlation. The contributed papers within this volume span numerous technical aspects of DIC including standards development for the industry.
Download or read book Experimental Stress Analysis for Materials and Structures written by Alessandro Freddi and published by Springer. This book was released on 2015-03-19 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the main methods of experimental stress analysis and examines their application to various states of stress of major technical interest, highlighting aspects not always covered in the classic literature. It is explained how experimental stress analysis assists in the verification and completion of analytical and numerical models, the development of phenomenological theories, the measurement and control of system parameters under operating conditions, and identification of causes of failure or malfunction. Cases addressed include measurement of the state of stress in models, measurement of actual loads on structures, verification of stress states in circumstances of complex numerical modeling, assessment of stress-related material damage, and reliability analysis of artifacts (e.g. prostheses) that interact with biological systems. The book will serve graduate students and professionals as a valuable tool for finding solutions when analytical solutions do not exist.
Download or read book Digital Image Processing using SCILAB written by Rohit M. Thanki and published by Springer. This book was released on 2018-05-07 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides basic theories and implementations using SCILAB open-source software for digital images. The book simplifies image processing theories and well as implementation of image processing algorithms, making it accessible to those with basic knowledge of image processing. This book includes many SCILAB programs at the end of each theory, which help in understanding concepts. The book includes more than sixty SCILAB programs of the image processing theory. In the appendix, readers will find a deeper glimpse into the research areas in the image processing.
Download or read book Flowers of Germany written by David Roman and published by . This book was released on 2010-04-08 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Flowers of Germany, is a collection of my flowers photographed around Germany.These flowers come from all over the world originally, but have become a lovely addition to many gardens in Germany over the years.This small book was originally made as a pocketbook, a surprise for a client as a birthday present.She often said to me, she would love to sit on the bus and look at the flowers in the winter time, if only she could keep them in her pocket.
Download or read book Precision Dimensional Measurements written by Kuang-Chao Fan and published by MDPI. This book was released on 2019-10-21 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection represents successful invited submissions from the papers presented at the 8th Annual Conference of Energy Economics and Management held in Beijing, China, 22–24 September 2017. With over 500 participants, the conference was co-hosted by the Management Science Department of National Natural Science Foundation of China, the Chinese Society of Energy Economics and Management, and Renmin University of China on the subject area of “Energy Transition of China: Opportunities and Challenges”. The major strategies to transform the energy system of China to a sustainable model include energy/economic structure adjustment, resource conservation, and technology innovation. Accordingly, the conference and its associated publications encourage research to address the major issues faced in supporting the energy transition of China. Papers published in this collection cover the broad spectrum of energy economics issues, including building energy efficiency, industrial energy demand, public policies to promote new energy technologies, power system control technology, emission reduction policies in energy-intensive industries, emission measurements of cities, energy price movement, and the impact of new energy vehicle.
Download or read book Correlation Pattern Recognition written by B. V. K. Vijaya Kumar and published by Cambridge University Press. This book was released on 2005-11-24 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Correlation is a robust and general technique for pattern recognition and is used in many applications, such as automatic target recognition, biometric recognition and optical character recognition. The design, analysis and use of correlation pattern recognition algorithms requires background information, including linear systems theory, random variables and processes, matrix/vector methods, detection and estimation theory, digital signal processing and optical processing. This book provides a needed review of this diverse background material and develops the signal processing theory, the pattern recognition metrics, and the practical application know-how from basic premises. It shows both digital and optical implementations. It also contains technology presented by the team that developed it and includes case studies of significant interest, such as face and fingerprint recognition. Suitable for graduate students taking courses in pattern recognition theory, whilst reaching technical levels of interest to the professional practitioner.
Download or read book The Image Processing Handbook written by John C. Russ and published by CRC Press. This book was released on 2006-12-19 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its fifth edition, John C. Russ‘s monumental image processing reference is an even more complete, modern, and hands-on tool than ever before. The Image Processing Handbook, Fifth Edition is fully updated and expanded to reflect the latest developments in the field. Written by an expert with unequalled experience and authority, it offers clea
Download or read book Proceedings of the 8th International Conference on Fracture Fatigue and Wear written by Magd Abdel Wahab and published by Springer Nature. This book was released on 2021-01-12 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings gather a selection of peer-reviewed papers presented at the 8th International Conference on Fracture Fatigue and Wear (FFW 2020), held as a virtual conference on 26–27 August 2020. The contributions, prepared by international scientists and engineers, cover the latest advances in and innovative applications of fracture mechanics, fatigue of materials, tribology, and wear of materials. In addition, they discuss industrial applications and cover theoretical and analytical methods, numerical simulations and experimental techniques. The book is intended for academics, including graduate students and researchers, as well as industrial practitioners working in the areas of fracture fatigue and wear.
Download or read book Digital Image Forensics written by Husrev Taha Sencar and published by Springer Science & Business Media. This book was released on 2012-08-01 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photographic imagery has come a long way from the pinhole cameras of the nineteenth century. Digital imagery, and its applications, develops in tandem with contemporary society’s sophisticated literacy of this subtle medium. This book examines the ways in which digital images have become ever more ubiquitous as legal and medical evidence, just as they have become our primary source of news and have replaced paper-based financial documentation. Crucially, the contributions also analyze the very profound problems which have arisen alongside the digital image, issues of veracity and progeny that demand systematic and detailed response: It looks real, but is it? What camera captured it? Has it been doctored or subtly altered? Attempting to provide answers to these slippery issues, the book covers how digital images are created, processed and stored before moving on to set out the latest techniques for forensically examining images, and finally addressing practical issues such as courtroom admissibility. In an environment where even novice users can alter digital media, this authoritative publication will do much so stabilize public trust in these real, yet vastly flexible, images of the world around us.
Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
Download or read book Formulas for Stress Strain and Structural Matrices written by Walter D. Pilkey and published by John Wiley & Sons. This book was released on 2005 with total page 1544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
