Download or read book Experiments in Analog and Digital Electronics written by Thomas E. Brewer and published by . This book was released on 2004-07-09 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ELECTRONICS LAB MANUAL VOLUME 2 written by NAVAS, K. A. and published by PHI Learning Pvt. Ltd.. This book was released on 2018-10-01 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is evolved from the experience of the author who taught all lab courses in his three decades of teaching in various universities in India. The objective of this lab manual is to provide information to undergraduate students to practice experiments in electronics laboratories. This book covers 118 experiments for linear/analog integrated circuits lab, communication engineering lab, power electronics lab, microwave lab and optical communication lab. The experiments described in this book enable the students to learn: • Various analog integrated circuits and their functions • Analog and digital communication techniques • Power electronics circuits and their functions • Microwave equipment and components • Optical communication devices This book is intended for the B.Tech students of Electronics and Communication Engineering, Electrical and Electronics Engineering, Biomedical Electronics, Instrumentation and Control, Computer Science, and Applied Electronics. It is designed not only for engineering students, but can also be used by BSc/MSc (Physics) and Diploma students. KEY FEATURES • Contains aim, components and equipment required, theory, circuit diagram, pin-outs of active devices, design, tables, graphs, alternate circuits, and troubleshooting techniques for each experiment • Includes viva voce and examination questions with their answers • Provides exposure on various devices TARGET AUDIENCE • B.Tech (Electronics and Communication Engineering, Electrical and Electronics Engineering, Biomedical Electronics, Instrumentation and Control, Computer Science, and Applied Electronics) • BSc/MSc (Physics) • Diploma (Engineering)
Download or read book Digital Electronics Laboratory Experiments written by James W. Stewart and published by Prentice Hall. This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual offers an easy-to-read, easy-to-follow approach to digital fundamentals through the use of Complex Programmable Logic Devices (CPLDs). The use of advanced logic device technology prepares readers for using an industry-standard design environment. The first shorter section of the book contains a set of lab jobs using a single TTL chip: the 74LS00 quad 2-input NAND gate, allowing students to build a few simple circuits immediately. The second section contains a set of hands-on lab jobs with step-by-step instructions on using the Xilinx XC95108 CPLD. With its comprehensive appendices, this manual can prove useful to those who work with large-scale programmable devices such as CPLDs and FPGAs in the fields of electronics and engineering.
Download or read book Digital Electronics written by Tokheim and published by . This book was released on 2004-11-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Laboratory Experiments in Electronics Engineering written by A. M. Zungeru and published by . This book was released on 2016-11-13 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is prepared after extensive simulations of the circuits with some electronic and engineering software such as Multisim, PSPICE and Circuit Logic. This handbook is designed basically to assist both tutors and students in the conduct of laboratory experiments. It has been proven over time that students tend to remember experiments they conducted much more than lectures they received. This handbook was written in a simple technical language and the mathematics behind the experiments clearly derived and explained. This book is intended to add a wealth of knowledge especially in physics, Electrical and Electronic and communications engineering for students in tertiary institutions such as Polytechnics, Monotechnics and Universities. This handbook contains thirty-eight experiments which can be categorized into Basic Electrical and Electronics Engineering experiments, Analogue Electronics experiments, and Digital Electronics experiments. Each experiment contains details of objectives, materials, theoretical background and procedures. The procedure involves steps and questions in understanding of the experiment being conducted. At the end of the book, some individual projects are present with the aim that, students who have mastered the experiments in the book can design basic electronics to solve world problems.
Download or read book Digital Electronics and Laboratory Computer Experiments written by Charles Wilkins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science undergraduates have come to accept the use of computers as commonplace. The daily use of portable sophisticated electronic calculators (some of them rivaling general-purpose minicomputers in their capa bi li ti es) has hastened this development. Over the past several years, computer assisted experimentation has assumed an important role in the experimental laboratory. Mini- and microcomputer systems have become an important part of the physical scientist's array of analytical instruments. Prompted by our beliefthat this was an inevitable development, we began several years aga to develop the curricular materials presented in this manual. At the outset, several objectives seemed important to uso First, insofar as possible, the experiments included should be thoroughly tested and error free. Second, they should be compatible with a variety of laboratory computer, data-acquisition, and control systems. Third, little or no previous background in either electronics or programming should be necessary. (Of course, such background would be advantageous. ) To satisfy these objectives, we decided to adopt a widespread high-level computer language, BASIC, suitably modified for the purpose. Furthermore, we have purposely avoided specifying any particular system or equipment. Rather, the functional characteristics of both hardware and software required are stipulated. The experiments have been developed using Varian 620 and Hewlett-Packard 2100 series computers, but we believe they are readily transferable to other commonly available computer systems with a minimum of difficulty.
Download or read book Digital Electronics written by Cherry Bhargava and published by . This book was released on 2020-06 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lab Experiments Digital Electronics a Practical Approach written by William Kleitz and published by . This book was released on 1990 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A First Lab in Circuits and Electronics written by Yannis Tsividis and published by Jossey-Bass Publishers. This book was released on 2002 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Experiments are linked to real applications. Students are likely to be interested and excited to learn more and explore. Example of experiments linked to real applications can be seen in Experiment 2, steps 6, 7, 15, and 16; Experiment 5, steps 6 to 10 and Experiment 7, steps 12 to 20. * Self-contained background to all electronics experiments. Students will be able to follow without having taken an electronics course. Includes a self-contained introduction based on circuits only. For the instructor this provides flexibility as to when to run the lab. It can run concurrently with the first circuits analysis course. * Review background sections are provided. This convenient text feature provides an alternative point of view; helps provide a uniform background for students of different theoretical backgrounds. * A "touch-and-feel" approach helps to provide intuition and to make things "click". Rather than thinking of the lab as a set of boring procedures, students get the idea that what they are learning is real. * Encourages students to explore and to ask "what if" questions. Helps students become active learners. * Introduces students to simple design at a very early stage. Helps students see the relevance of what they are learning, and to become active learners. * Helps students become tinkerers and to experiment on their own. Students are encouraged to become creative, and their mind is opened to new possibilities. This also benefits their subsequent professional work and/or graduate study.
Download or read book Lab Manual for Electronics written by Martin Feldman and published by Prentice Hall. This book was released on 2001-11 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emphasis is first on understanding the characteristics of basic circuits including resistors, capacitors, diodes, and bipolar and field effect transistors. The readers then use this understanding to construct more complex circuits such as power supplies, differential amplifiers, tuned circuit amplifiers, a transistor curve tracer, and a digital voltmeter. In addition, readers are exposed to special topics of current interest, such as the propagation and detection of signals through fiber optics, the use of Van der Pauw patterns for precise linewidth measurements, and high gain amplifiers based on active loads. KEY TOPICS: Chapter topics include Thevenin's Theorem; Resistive Voltage Division; Silicon Diodes; Resistor Capacitor Circuits; Half Wave Rectifiers; DC Power Supplies; Diode Applications; Bipolar Transistors; Field Effect Transistors; Characterization of Op-Amp Circuits; Transistor Curve Tracer; Introduction to PSPICE and AC Voltage Dividers; Characterization and Design of Emitter and Source Followers; Characterization and Design of an AC Variable Gain Amplifier; Design of Test Circuits for BJT's and FET's and Design of FET Ring Oscillators; Design and Characterization of Emitter Coupled Transistor Pairs; Tuned Amplifier and Oscillator; Design of Am Radio Frequency Transmitter and Receiver; Design of Oscillators Using Op-Amps; Current Mirrors and Active Loads; Sheet Resistance; Design of Analog Fiber Optic Transmission System; Digital Voltmeter.
Download or read book Digital Circuits Laboratory Manual written by Farzin Asadi and published by Springer Nature. This book was released on 2023-08-30 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital systems are an important part of modern life. This book introduces the basic building blocks of digital systems and how these blocks can be used to design a digital system. It can be used as a laboratory manual for courses such as Digital Logic and Digital Electronics. All of the experiments in this book can be done in a simulation environment like: Proteus® or NI® MultiSim® or on the breadboard in a real laboratory environment.
Download or read book Basic Digital Electronics written by J.A. Strong and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern electronics is the most visible result of research in solid state physics. Transistors and integrated circuits are used everywhere in ever increasing numbers. The microprocessor controlled coffee-pot exists. Most experimental physicists, and, indeed, experimental scientists in most disciplines, study their subject with the aid of apparatus containing significant amounts of electronics and much of that electronics is digital. In order to design experiments and apparatus or simply to understand how a piece of equipment works, an under standing of electronics has become increasingly important. In recognition that electronics has pervaded so many areas, courses in digital electronics are now a recommended part of physics and many other science degree courses. At the introductory level, digital electronics is, primarily, a practical subject with relatively few basic concepts and any complex ity arises from the coupling together of many simple circuits and the extensive use of feedback. Designing an electronic circuit and then getting it to work correctly provides an experience, and a sense of achievement, which is significantly different from most undergradu ate work as it more closely resembles project work than standard laboratory practicals.
Download or read book Digital Electronics Guidebook written by Michael Predko and published by TAB/Electronics. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide that explains how TTL (Transistor to Transistor Logic) circuits are designed and interfaced to "real world" circuits. Includes over 20 projects to teach digital circuits design, including a design for a simple 8-bit computer system .Complete with a reusable PCB (Printed Circuit Board) that can be used for all the projects in the book.
Download or read book Handbook of Laboratory Experiments in Electronics and Communication Engineering written by A M Zungeru and published by . This book was released on 2017-03-08 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook is prepared after extensive simulations of circuits with some electronic and engineering software such as Multisim, Pspice, Proteus, MATLAB and Circuit Logic. The Handbook is designed basically to assist both tutors and students in the conduction of laboratory experiments. It has been proven over time that students tend to remember the experiments that they had conducted much better than the lectures that they received. The Handbook has been written in a simple technical language and the mathematics behind the experiments have been clearly derived and explained. The book is intended to add wealth of knowledge, especially in physics, electrical and electronic and communications engineering programmes for students in tertiary institutions such as Polytechnics, Monotechnics and Universities. This Handbook contains five sections and a total of thirty-three experiments which can be categorized into Basic Electronics Software, Communication System Engineering experiments and Optical Communication experiments. Each experiment contains objectives, materials, theoretical background and procedures. The procedure involves steps and questions for understanding the experiments being conducted.
Download or read book Multisim Experiments for DC AC Digital and Devices Courses written by Gary Snyder and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The National Instruments Multisim® software is a versatile design and simulation program. The intent of this workbook is to simulate a laboratory experience in electronics and help you develop a working knowledge of the Multisim software to enter and analyze circuit designs. The circuits in this manual illustrate fundamental concepts in dc/ac, digital, and device electronics. Each section will contain some background theory for the circuits that you will investigate, but only to help provide context for the specific topics that the section will cover. For best results, you should use this workbook to supplement, rather than replace, a textbook that discusses the subject material in depth. This manual provides suggested reading for each experiment."--pub. desc.
Download or read book Laboratory Manual for Introductory Electronics Experiments written by L. K. Maheshwari and published by New Age International. This book was released on 1979 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Learning the Art of Electronics written by Thomas C. Hayes and published by Cambridge University Press. This book was released on 2016-03-02 with total page 1150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introduction to circuit design is unusual in several respects. First, it offers not just explanations, but a full course. Each of the twenty-five sessions begins with a discussion of a particular sort of circuit followed by the chance to try it out and see how it actually behaves. Accordingly, students understand the circuit's operation in a way that is deeper and much more satisfying than the manipulation of formulas. Second, it describes circuits that more traditional engineering introductions would postpone: on the third day, we build a radio receiver; on the fifth day, we build an operational amplifier from an array of transistors. The digital half of the course centers on applying microcontrollers, but gives exposure to Verilog, a powerful Hardware Description Language. Third, it proceeds at a rapid pace but requires no prior knowledge of electronics. Students gain intuitive understanding through immersion in good circuit design.
