Download or read book Device Design and Fabrication of InGaP GaAsSb GaAs DHBTs written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: (Uncorrected OCR) Abstract of thesis entitled Device Design and Fabrication of InGaP/GaAsSb/GaAs DHBTs submitted by Cheung Chi Chuen, Cecil for the degree of Master of Philosophy at the University of Hong Kong in December 2003 A study of the InGaP/GaAsSb/GaAs double heterojunction bipolar transistor (DHBT) is presented. A novel device structure is designed, fully strained pseudomorphic GaAsSb with different Sb (Antimony) compositions is used as the base layer and an InGaP layer is used as the emitter. Thus both eliminates the misfit dislocations and increases the valence band discontinuity at the InGaP/GaAsSb interface. Various aspects of device performance, including the IV characteristics, current gain, ideality factor, current transport mechanism, high frequency performances and the turn on voltage of the InGaP/GaAsSb/GaAs DHBT are investigated. The results indicate that GaAsSb is a promising base material for reducing the turn-on voltage of GaAs HBTs. The thesis is organized into five chapters. Chapter One, an introductory chapter, defines the aim of the study. Chapter Two reviews the relevant literature and discusses the basic principle of the HBT device physics and the DC (direct current) and RF (radio-frequency) characteristics of the HBT devices. Chapter Three describes the device design and fabrication process in detail, and is illustrated with captioned diagrams. Chapter Four discusses and analyzes the experimental results, and is illustrated with appropriate graphs and tables. Chapter Five discusses the significance of the research in summary form, and suggests some practical ideas for future development.
Download or read book Device Design and Fabrication of InGaP GaAsSb GaAs DHBTs written by Chi-chuen Cheung (Cecil) and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication of GaAs Devices written by Albert G. Baca and published by IET. This book was released on 2005-09 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides fundamental and practical information on all aspects of GaAs processing and gives pragmatic advice on cleaning and passivation, wet and dry etching and photolithography. Other topics covered include device performance for HBTs (Heterojunction Bipolar Transistors) and FETs (Field Effect Transistors), how these relate to processing choices, and special processing issues such as wet oxidation, which are especially important in optoelectronic devices. This book is suitable for both new and practising engineers.
Download or read book 2003 IEEE Conference on Electron Devices and Solid State Circuits written by and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 2003 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings from the 2003 IEEE Conference on Electron Devices and Solid-State Circuits.
Download or read book GaAs High Speed Devices written by C. Y. Chang and published by John Wiley & Sons. This book was released on 1994-10-28 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: The performance of high-speed semiconductor devices—the genius driving digital computers, advanced electronic systems for digital signal processing, telecommunication systems, and optoelectronics—is inextricably linked to the unique physical and electrical properties of gallium arsenide. Once viewed as a novel alternative to silicon, gallium arsenide has swiftly moved into the forefront of the leading high-tech industries as an irreplaceable material in component fabrication. GaAs High-Speed Devices provides a comprehensive, state-of-the-science look at the phenomenally expansive range of engineering devices gallium arsenide has made possible—as well as the fabrication methods, operating principles, device models, novel device designs, and the material properties and physics of GaAs that are so keenly integral to their success. In a clear five-part format, the book systematically examines each of these aspects of GaAs device technology, forming the first authoritative study to consider so many important aspects at once and in such detail. Beginning with chapter 2 of part one, the book discusses such basic subjects as gallium arsenide materials and crystal properties, electron energy band structures, hole and electron transport, crystal growth of GaAs from the melt and defect density analysis. Part two describes the fabrication process of gallium arsenide devices and integrated circuits, shedding light, in chapter 3, on epitaxial growth processes, molecular beam epitaxy, and metal organic chemical vapor deposition techniques. Chapter 4 provides an introduction to wafer cleaning techniques and environment control, wet etching methods and chemicals, and dry etching systems, including reactive ion etching, focused ion beam, and laser assisted methods. Chapter 5 provides a clear overview of photolithography and nonoptical lithography techniques that include electron beam, x-ray, and ion beam lithography systems. The advances in fabrication techniques described in previous chapters necessitate an examination of low-dimension device physics, which is carried on in detail in chapter 6 of part three. Part four includes a discussion of innovative device design and operating principles which deepens and elaborates the ideas introduced in chapter 1. Key areas such as metal-semiconductor contact systems, Schottky Barrier and ohmic contact formation and reliability studies are examined in chapter 7. A detailed discussion of metal semiconductor field-effect transistors, the fabrication technology, and models and parameter extraction for device analyses occurs in chapter 8. The fifth part of the book progresses to an up-to-date discussion of heterostructure field-effect (HEMT in chapter 9), potential-effect (HBT in chapter 10), and quantum-effect devices (chapters 11 and 12), all of which are certain to have a major impact on high-speed integrated circuits and optoelectronic integrated circuit (OEIC) applications. Every facet of GaAs device technology is placed firmly in a historical context, allowing readers to see instantly the significant developmental changes that have shaped it. Featuring a look at devices still under development and device structures not yet found in the literature, GaAs High-Speed Devices also provides a valuable glimpse into the newest innovations at the center of the latest GaAs technology. An essential text for electrical engineers, materials scientists, physicists, and students, GaAs High-Speed Devices offers the first comprehensive and up-to-date look at these formidable 21st century tools. The unique physical and electrical properties of gallium arsenide has revolutionized the hardware essential to digital computers, advanced electronic systems for digital signal processing, telecommunication systems, and optoelectronics. GaAs High-Speed Devices provides the first fully comprehensive look at the enormous range of engineering devices gallium arsenide has made possible as well as the backbone of the technology—ication methods, operating principles, and the materials properties and physics of GaAs—device models and novel device designs. Featuring a clear, six-part format, the book covers: GaAs materials and crystal properties Fabrication processes of GaAs devices and integrated circuits Electron beam, x-ray, and ion beam lithography systems Metal-semiconductor contact systems Heterostructure field-effect, potential-effect, and quantum-effect devices GaAs Microwave Monolithic Integrated Circuits and Digital Integrated Circuits In addition, this comprehensive volume places every facet of the technology in an historical context and gives readers an unusual glimpse at devices still under development and device structures not yet found in the literature.
Download or read book Fabrication of GaAs Devices written by A. G. Baca and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The following topics are dealt with: semiconductor properties, semiconductor growth, cleaning; passivation; dry etching; ohmic contacts; Schottky contacts; field effect transistors; heterojunction bipolar transistors; wet oxidation; optoelectronic device; and MIS GaAs device
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2616 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Compact Modeling written by Gennady Gildenblat and published by Springer Science & Business Media. This book was released on 2010-06-22 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of the recent texts on compact modeling are limited to a particular class of semiconductor devices and do not provide comprehensive coverage of the field. Having a single comprehensive reference for the compact models of most commonly used semiconductor devices (both active and passive) represents a significant advantage for the reader. Indeed, several kinds of semiconductor devices are routinely encountered in a single IC design or in a single modeling support group. Compact Modeling includes mostly the material that after several years of IC design applications has been found both theoretically sound and practically significant. Assigning the individual chapters to the groups responsible for the definitive work on the subject assures the highest possible degree of expertise on each of the covered models.
Download or read book Analysis and Simulation of Heterostructure Devices written by Vassil Palankovski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of this monograph is the physical modeling of heterostructure devices. A detailed discussion of physical models and parameters for compound semiconductors is presented including the relevant aspects of modern submicron heterostructure devices. More than 25 simulation examples for different types of Si(Ge)-based, GaAs-based, InP-based, and GaN-based heterostructure bipolar transistors (HBTs) and high electron mobility transistors (HEMTs) are given in comparison with experimental data from state-of-the-art devices.
Download or read book Science Abstracts written by and published by . This book was released on 1993 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dilute Nitride Semiconductors written by Mohamed Henini and published by Elsevier. This book was released on 2004-12-15 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: - This book contains full account of the advances made in the dilute nitrides, providing an excellent starting point for workers entering the field. - It gives the reader easier access and better evaluation of future trends, Conveying important results and current ideas. - Includes a generous list of references at the end of each chapter, providing a useful reference to the III-V-N based semiconductors research community. The high speed lasers operating at wavelength of 1.3 μm and 1.55 μm are very important light sources in optical communications since the optical fiber used as a transport media of light has dispersion and attenuation minima, respectively, at these wavelengths. These long wavelengths are exclusively made of InP-based material InGaAsP/InP. However, there are several problems with this material system. Therefore, there has been considerable effort for many years to fabricate long wavelength laser structures on other substrates, especially GaAs. The manufacturing costs of GaAs-based components are lower and the processing techniques are well developed. In 1996 a novel quaternary material GaInAsN was proposed which could avoid several problems with the existing technology of long wavelength lasers. In this book, several leaders in the field of dilute nitrides will cover the growth and processing, experimental characterization, theoretical understanding, and device design and fabrication of this recently developed class of semiconductor alloys. They will review their current status of research and development. Dilute Nitrides (III-N-V) Semiconductors: Physics and Technology organises the most current available data, providing a ready source of information on a wide range of topics, making this book essential reading for all post graduate students, researchers and practitioners in the fields of Semiconductors and Optoelectronics - Contains full account of the advances made in the dilute nitrides, providing an excellent starting point for workers entering the field - Gives the reader easier access and better evaluation of future trends, conveying important results and current ideas - Includes a generous list of references at the end of each chapter, providing a useful reference to the III-V-N based semiconductors research community
Download or read book Modern Microwave Transistors written by Frank Schwierz and published by Wiley-Interscience. This book was released on 2003 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive and up-to-date coverage of currently used transistors for commercial and military applications. Authors are recognized experts with previous publications. Updated descriptions of state-of-the-art devices available on Wiley Web site.
Download or read book Metalorganic Vapor Phase Epitaxy MOVPE written by Stuart Irvine and published by John Wiley & Sons. This book was released on 2019-10-07 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systematically discusses the growth method, material properties, and applications for key semiconductor materials MOVPE is a chemical vapor deposition technique that produces single or polycrystalline thin films. As one of the key epitaxial growth technologies, it produces layers that form the basis of many optoelectronic components including mobile phone components (GaAs), semiconductor lasers and LEDs (III-Vs, nitrides), optical communications (oxides), infrared detectors, photovoltaics (II-IV materials), etc. Featuring contributions by an international group of academics and industrialists, this book looks at the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring. It covers the most important materials from III-V and II-VI compounds to quantum dots and nanowires, including sulfides and selenides and oxides/ceramics. Sections in every chapter of Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications cover the growth of the particular materials system, the properties of the resultant material, and its applications. The book offers information on arsenides, phosphides, and antimonides; nitrides; lattice-mismatched growth; CdTe, MCT (mercury cadmium telluride); ZnO and related materials; equipment and safety; and more. It also offers a chapter that looks at the future of the technique. Covers, in order, the growth method, material properties, and applications for each material Includes chapters on the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring Looks at important materials such as III-V and II-VI compounds, quantum dots, and nanowires Provides topical and wide-ranging coverage from well-known authors in the field Part of the Materials for Electronic and Optoelectronic Applications series Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications is an excellent book for graduate students, researchers in academia and industry, as well as specialist courses at undergraduate/postgraduate level in the area of epitaxial growth (MOVPE/ MOCVD/ MBE).
Download or read book Heteroepitaxy of Semiconductors written by John E. Ayers and published by CRC Press. This book was released on 2016-10-03 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past ten years, heteroepitaxy has continued to increase in importance with the explosive growth of the electronics industry and the development of a myriad of heteroepitaxial devices for solid state lighting, green energy, displays, communications, and digital computing. Our ever-growing understanding of the basic physics and chemistry underlying heteroepitaxy, especially lattice relaxation and dislocation dynamic, has enabled an ever-increasing emphasis on metamorphic devices. To reflect this focus, two all-new chapters have been included in this new edition. One chapter addresses metamorphic buffer layers, and the other covers metamorphic devices. The remaining seven chapters have been revised extensively with new material on crystal symmetry and relationships, III-nitride materials, lattice relaxation physics and models, in-situ characterization, and reciprocal space maps.
Download or read book Compact Hierarchical Bipolar Transistor Modeling with Hicum written by Michael Schrter and published by World Scientific. This book was released on 2010 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Hierarchical Bipolar Transistor Modeling with HICUM will be of great practical benefit to professionals from the process development, modeling and circuit design community who are interested in the application of bipolar transistors, which include the SiGe:C HBTs fabricated with existing cutting-edge process technology. The book begins with an overview on the different device designs of modern bipolar transistors, along with their relevant operating conditions; while the subsequent chapter on transistor theory is subdivided into a review of mostly classical theories, brought into context with modern technology, and a chapter on advanced theory that is required for understanding modern device designs. This book aims to provide a solid basis for the understanding of modern compact models.
Download or read book III V Compound Semiconductors and Devices written by Keh Yung Cheng and published by Springer Nature. This book was released on 2020-11-08 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook gives a complete and fundamental introduction to the properties of III-V compound semiconductor devices, highlighting the theoretical and practical aspects of their device physics. Beginning with an introduction to the basics of semiconductor physics, it presents an overview of the physics and preparation of compound semiconductor materials, as well as a detailed look at the electrical and optical properties of compound semiconductor heterostructures. The book concludes with chapters dedicated to a number of heterostructure electronic and photonic devices, including the high-electron-mobility transistor, the heterojunction bipolar transistor, lasers, unipolar photonic devices, and integrated optoelectronic devices. Featuring chapter-end problems, suggested references for further reading, as well as clear, didactic schematics accompanied by six information-rich appendices, this textbook is ideal for graduate students in the areas of semiconductor physics or electrical engineering. In addition, up-to-date results from published research make this textbook especially well-suited as a self-study and reference guide for engineers and researchers in related industries.
Download or read book Technology of Quantum Devices written by Manijeh Razeghi and published by Springer Science & Business Media. This book was released on 2009-12-11 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology of Quantum Devices offers a multi-disciplinary overview of solid state physics, photonics and semiconductor growth and fabrication. Readers will find up-to-date coverage of compound semiconductors, crystal growth techniques, silicon and compound semiconductor device technology, in addition to intersubband and semiconductor lasers. Recent findings in quantum tunneling transport, quantum well intersubband photodetectors (QWIP) and quantum dot photodetectors (QWDIP) are described, along with a thorough set of sample problems.
