Download or read book Device and Process Technologies for Microelectronics MEMS Photonics and Nanotechnology IV written by Hark Hoe Tan and published by Society of Photo Optical. This book was released on 2008 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes Proceedings Vol. 7821
Download or read book Device and Process Technologies for Microelectronics MEMS Photonics and Nanotechnology IV written by and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Device and Process Technologies for MEMS and Microelectronics written by and published by . This book was released on 2005 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Photonic Microsystems written by Olav Solgaard and published by Springer Science & Business Media. This book was released on 2009-04-05 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes Microelectromechanical systems (MEMS) technology and demonstrates how MEMS allow miniaturization, parallel fabrication, and efficient packaging of optics, as well as integration of optics and electronics. The book shows how the characteristics of MEMS enable practical implementations of a variety of applications, including projection displays, fiber switches, interferometers, and spectrometers. The authors conclude with an up-to-date discussion of the need for the combination of MEMS and Photonic crystals.
Download or read book Photonic MEMS Devices written by Ai-Qun Liu and published by CRC Press. This book was released on 2018-10-08 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photonic MEMS devices represent the next major breakthrough in the silicon revolution. While many quality resources exist on the optic and photonic aspect of device physics, today’s researchers are in need of a reference that goes beyond to include all aspects of engineering innovation. An extension on traditional design and analysis, Photonic MEMS Devices: Design, Fabrication, and Control describes a broad range of optical and photonic devices, from MEMS optical switches and bandgap crystal switches to optical variable attenuators (VOA) and injection locked tunable lasers. It deals rigorously with all these technologies at a fundamental level, systematically introducing critical nomenclature. Each chapter also provides analysis techniques, equations, and experimental results. The book focuses not only on traditional design analysis, but also provides extensive background on realistic simulation and fabrication processes. With a clear attention to experimental relevance, this book provides the fundamental knowledge needed to take the next-step in integrating photonic MEMS devices into commercial products and technology.
Download or read book Silicon Photonics Design written by Lukas Chrostowski and published by Cambridge University Press. This book was released on 2015-03-12 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: From design and simulation through to testing and fabrication, this hands-on introduction to silicon photonics engineering equips students with everything they need to begin creating foundry-ready designs. In-depth discussion of real-world issues and fabrication challenges ensures that students are fully equipped for careers in industry. Step-by-step tutorials, straightforward examples, and illustrative source code fragments guide students through every aspect of the design process, providing a practical framework for developing and refining key skills. Offering industry-ready expertise, the text supports existing PDKs for CMOS UV-lithography foundry services (OpSIS, ePIXfab, imec, LETI, IME and CMC) and the development of new kits for proprietary processes and clean-room based research. Accompanied by additional online resources to support students, this is the perfect learning package for senior undergraduate and graduate students studying silicon photonics design, and academic and industrial researchers involved in the development and manufacture of new silicon photonics systems.
Download or read book Nano Optoelectronic Sensors and Devices written by Ning Xi and published by William Andrew. This book was released on 2011-10-14 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanophotonics has emerged as a major technology and applications domain, exploiting the interaction of light-emitting and light-sensing nanostructured materials. These devices are lightweight, highly efficient, low on power consumption, and are cost effective to produce. The authors of this book have been involved in pioneering work in manufacturing photonic devices from carbon nanotube (CNT) nanowires and provide a series of practical guidelines for their design and manufacture, using processes such as nano-robotic manipulation and assembly methods. They also introduce the design and operational principles of opto-electrical sensing devices at the nano scale. Thermal annealing and packaging processes are also covered, as key elements in a scalable manufacturing process. Examples of applications of different nanowire based photonic devices are presented. These include applications in the fields of electronics (e.g. FET, CNT Schotty diode) and solar energy. Discusses opto-electronic nanomaterials, characterization and properties from an engineering perspective, enabling the commercialization of key emerging technologies Provides scalable techniques for nanowire structure growth, manipulation and assembly (i.e. synthesis) Explores key application areas such as sensing, electronics and solar energy
Download or read book Micromachined Circuits and Devices written by Shiban Kishen Koul and published by Springer Nature. This book was released on 2022-02-07 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the design of different switching and resonant devices using the present state-of-the-art radio frequency (RF) micromachining (MEMS) technology. Different topologies of MEMS switches have been discussed considering optimum performances over microwave to millimeter wave frequency range. Wide varieties of micromachined switching networks starting from single-pole-double-throw (SPDT) to single-pole-fourteen-throw (SP14T) are discussed utilizing vertical and lateral actuation movements of the switch. Different transduction mechanisms of micromachined resonators are highlighted that includes capacitive, piezoelectric, and piezoresistive types. The book provides major design guidelines for the development of MEMS-based digital phase shifters, tunable filters, and antennas with extensive measurement data. Apart from the radio frequency (RF) requirements, an extensive guideline is given for the improvement of the reliability of micromachined switches and digital phase shifters where multiple switches are operating simultaneously. It takes multiple iterations and extensive characterizations to conclude with a reliable MEMS digital phase shifter, and these aspects are given one of the prime attentions in this book. Detailed performance analysis of metamaterial inspired MEMS switches is then discussed for application in millimeter wave frequency bands up to about 170 GHz. The book concludes with future research activities of RF MEMS technology and its potential in space, defense, sensors, and biomedical applications.
Download or read book Micro and Nanophotonics for Semiconductor Infrared Detectors written by Zoran Jakšić and published by Springer. This book was released on 2014-09-25 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advent of microelectromechanic system (MEMS) technologies and nanotechnologies has resulted in a multitude of structures and devices with ultra compact dimensions and with vastly enhanced or even completely novel properties. In the field of photonics it resulted in the appearance of new paradigms, including photonic crystals that exhibit photonic bandgap and represent an optical analog of semiconductors and metamaterials that have subwavelength features and may have almost arbitrary values of effective refractive index, including those below zero. In addition to that, a whole new field of plasmonics appeared, dedicated to the manipulation with evanescent, surface-bound electromagnetic waves and offering an opportunity to merge nanoelectronics with all-optical circuitry. In the field of infrared technologies MEMS and nanotechnologies ensured the appearance of a new generation of silicon-based thermal detectors with properties vastly surpassing the conventional thermal devices. However, another family of infrared detectors, photonic devices based on narrow-bandgap semiconductors, has traditionally been superior to thermal detectors. Literature about their micro and nanophotonic enhancement has been scarce and scattered through journals. This book offers the first systematic approach to numerous different MEMS and nanotechnology-based methods available for the improvement of photonic infrared detectors and points out to a path towards uncooled operation with the performance of cryogenically cooled devices. It is shown that a vast area for enhancement does exists and that photonic devices can readily keep their leading position in infrared detection. The various methods and approaches described in the book are also directly applicable to different other types of photodetectors like solar cells, often with little or no modification.
Download or read book Nanoelectronics and Photonics written by Anatoli Korkin and published by Springer Science & Business Media. This book was released on 2008-09-23 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoelectronics and Photonics provides a fundamental description of the core elements and problems of advanced and future information technology. The authoritative book collects a series of tutorial chapters from leaders in the field covering fundamental topics from materials to devices and system architecture, and bridges the fundamental laws of physics and chemistry of materials at the atomic scale with device and circuit design and performance requirements.
Download or read book Developments in Surface Contamination and Cleaning Types of Contamination and Contamination Resources written by Rajiv Kohli and published by William Andrew. This book was released on 2016-11-21 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Surface Contamination and Cleaning, Volume Ten, provides a state-of-the-art guide to the current knowledge on the behavior of film-type and particulate surface contaminants and their cleaning methods. This newest volume in the series discusses mechanisms of particle adhesion, particle behavior in liquid systems, and metallic contamination and its impact. In addition, the book includes a discussion of the types of contaminants, with resources to deal with them and information on environmental issues related to surface contamination and cleaning. Taken as a whole, the series forms a unique reference for professionals and academics working in the area of surface contamination and cleaning that also includes information on cleaning at the micro and nano scales. Written by established experts in the contamination field that provide an authoritative resource Presents a comprehensive review of new trends in contaminants and resources for dealing with those contaminants Contains detailed case studies to illustrate various scenarios
Download or read book Developments in Surface Contamination and Cleaning Volume 12 written by Rajiv Kohli and published by Elsevier. This book was released on 2019-06-08 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Surface Contamination and Cleaning: Methods for Assessment and Verification of Cleanliness of Surfaces and Characterization of Surface Contaminants, Volume Twelve, the latest release in the Developments in Surface Contamination and Cleaning series, provides best practices on determining surface cleanliness. Chapters include an introduction to the nature and size of particles, a discussion of cleanliness levels, detailed coverage of measurement methods, characterization methods and analytical methods for evaluating surfaces, and an overview of analysis methods for various contaminants. As a whole, the series creates a unique and comprehensive knowledge base for those in research and development in a variety of industries. Manufacturing, quality control and procurement specification professionals in the aerospace, automotive, biomedical, defense, energy, manufacturing, microelectronics, optics and xerography industries will find this book to be very helpful. In addition, researchers in an academic setting will also find these volumes excellent source books. Includes an extensive listing, with a description of available methods for the assessment of surface cleanliness Provides a single source of information on methods for verification of surface cleanliness Serves as a guide to the selection, assessment and verification of methods for specific applications
Download or read book Functional Thin Films and Nanostructures for Sensors written by Anis Zribi and published by Springer Science & Business Media. This book was released on 2009-04-05 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses advances in functional thin films for sensors and novel concepts for future breakthroughs. The focus is on guidelines and design rules for sensor systems, interaction between functional thin films and other sensor subsystems, fundamentals behind the intrinsic functionality in sensing thin films and nanostructures, state-of-the-art technologies used to develop sensors today and concrete examples of sensor designs.
Download or read book VLSI Micro and Nanophotonics written by El-Hang Lee and published by CRC Press. This book was released on 2010-09-22 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing the growing demand for larger capacity in information technology, VLSI Micro- and Nanophotonics: Science, Technology, and Applications explores issues of science and technology of micro/nano-scale photonics and integration for broad-scale and chip-scale Very Large Scale Integration photonics. This book is a game-changer in the sense that it is quite possibly the first to focus on "VLSI Photonics". Very little effort has been made to develop integration technologies for micro/nanoscale photonic devices and applications, so this reference is an important and necessary early-stage perspective on this field. New demand for VLSI photonics brings into play various technological and scientific issues, as well as evolutionary and revolutionary challenges—all of which are discussed in this book. These include topics such as miniaturization, interconnection, and integration of photonic devices at micron, submicron, and nanometer scales. With its "disruptive creativity" and unparalleled coverage of the photonics revolution in information technology, this book should greatly impact the future of micro/nano-photonics and IT as a whole. It offers a comprehensive overview of the science and engineering of micro/nanophotonics and photonic integration. Many books on micro/nanophotonics focus on understanding the properties of individual devices and their related characteristics. However, this book offers a full perspective from the point of view of integration, covering all aspects of benefits and advantages of VLSI-scale photonic integration—the key technical concept in developing a platform to make individual devices and components useful and practical for various applications.
Download or read book Nanotechnology for Microelectronics and Photonics written by Raúl José Martín-Palma and published by Elsevier. This book was released on 2017-06-01 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology for Microelectronics and Photonics, Second Edition has been thoroughly revised, expanded, and updated. The aim of the book is to present the most recent advances in the field of nanomaterials, as well as the devices being developed for novel nanoelectronics and nanophotonic systems. It covers the many novel nanoscale applications in microelectronics and photonics that have been developed in recent years. Looking to the future, the book suggests what other applications are currently in development and may become feasible within the next few decades based on novel materials such as graphene, nanotubes, and organic semiconductors. In addition, the inclusion of new chapters and new sections to keep up with the latest developments in this rapidly-evolving field makes Nanotechnology for Microelectronics and Photonics, Second Edition an invaluable reference to research and industrial scientists looking for a guide on how nanostructured materials and nanoscale devices are used in microelectronics, optoelectronics, and photonics today and in future developments. Presents the fundamental scientific principles that explain the novel properties and applications of nanostructured materials in the quantum frontier Offers clear and concise coverage of how nanotechnology is currently used in the areas of microelectronics, optoelectronics, and photonics, as well as future proposed devices Includes nearly a hundred problems along with helpful hints and full solutions for more than half of them
Download or read book Nano Bio Electronic Photonic and MEMS Packaging written by C.P. Wong and published by Springer Science & Business Media. This book was released on 2009-12-23 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnologies are being applied to the biotechnology area, especially in the area of nano material synthesis. Until recently, there has been little research into how to implement nano/bio materials into the device level. “Nano and Bio Electronics Packaging” discusses how nanofabrication techniques can be used to customize packaging for nano devices with applications to biological and biomedical research and products. Covering such topics as nano bio sensing electronics, bio device packaging, NEMs for Bio Devices and much more.
Download or read book Advanced Fabrication Technologies for Micro nano Optics and Photonics IV written by Winston V. Schoenfeld and published by SPIE-International Society for Optical Engineering. This book was released on 2011 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes Proceedings Vol. 7821
