Download or read book Advances in X ray Tomography for Geomaterials written by Jacques Desrues and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together a total of 48 contributions (including 5 keynote papers) which were presented at the 2nd International Workshop on the Application of X-ray CT for Geomaterials (GeoX 2006) held in Aussois, France, on 4-7 October, 2006. The contributions cover a wide range of topics, from fundamental characterization of material behavior to applications in geotechnical and geoenvironmental engineering. Recent advances of X-ray technology, hardware and software are also discussed. As such, this will be valuable reading for anyone interested in the application of X-ray CT to geomaterials from both fundamental and applied perspectives.
Download or read book Developments in X ray Tomography written by and published by . This book was released on 2006 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial X Ray Computed Tomography written by Simone Carmignato and published by Springer. This book was released on 2017-10-18 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray computed tomography has been used for several decades as a tool for measuring the three-dimensional geometry of the internal organs in medicine. However, in recent years, we have seen a move in manufacturing industries for the use of X-ray computed tomography; first to give qualitative information about the internal geometry and defects in a component, and more recently, as a fully-quantitative technique for dimensional and materials analysis. This trend is primarily due to the ability of X-ray computed tomography to give a high-density and multi-scale representation of both the external and internal geometry of a component, in a non-destructive, non-contact and relatively fast way. But, due to the complexity of X-ray computed tomography, there are remaining metrological issues to solve and the specification standards are still under development. This book will act as a one-stop-shop resource for students and users of X-ray computed tomography in both academia and industry. It presents the fundamental principles of the technique, detailed descriptions of the various components (hardware and software), current developments in calibration and performance verification and a wealth of example applications. The book will also highlight where there is still work to do, in the perspective that X-ray computed tomography will be an essential part of Industry 4.0.
Download or read book Mathematics and Physics of Emerging Biomedical Imaging written by Committee on the Mathematics and Physics of Emerging Dynamic Biomedical Imaging and published by National Academies Press. This book was released on 1996-03-13 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cross-disciplinary book documents the key research challenges in the mathematical sciences and physics that could enable the economical development of novel biomedical imaging devices. It is hoped that the infusion of new insights from mathematical scientists and physicists will accelerate progress in imaging. Incorporating input from dozens of biomedical researchers who described what they perceived as key open problems of imaging that are amenable to attack by mathematical scientists and physicists, this book introduces the frontiers of biomedical imaging, especially the imaging of dynamic physiological functions, to the educated nonspecialist. Ten imaging modalities are covered, from the well-established (e.g., CAT scanning, MRI) to the more speculative (e.g., electrical and magnetic source imaging). For each modality, mathematics and physics research challenges are identified and a short list of suggested reading offered. Two additional chapters offer visions of the next generation of surgical and interventional techniques and of image processing. A final chapter provides an overview of mathematical issues that cut across the various modalities.
Download or read book X Ray CT written by Hiroyuki Toda and published by Springer Nature. This book was released on 2021-03-09 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides easy-to-understand explanations to systematically and comprehensively describe the X-ray CT technologies, techniques, and skills used for industrial and scientific purposes. Included are many references along with photographs, figures, and equations prepared by the author. These features all facilitate the reader's gaining a deeper understanding of the topics being discussed. The book presents expertise not only on fundamentals but also about hardware, software, and analytical methods for the benefit of technical users. The book targets engineers, researchers, and students who are involved in research, development, design, and quality assurance in industry and academia.
Download or read book Medical Imaging Systems written by Andreas Maier and published by Springer. This book was released on 2018-08-02 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book gives a complete and comprehensive introduction to the fields of medical imaging systems, as designed for a broad range of applications. The authors of the book first explain the foundations of system theory and image processing, before highlighting several modalities in a dedicated chapter. The initial focus is on modalities that are closely related to traditional camera systems such as endoscopy and microscopy. This is followed by more complex image formation processes: magnetic resonance imaging, X-ray projection imaging, computed tomography, X-ray phase-contrast imaging, nuclear imaging, ultrasound, and optical coherence tomography.
Download or read book MDCT written by Mannudeep K. Kalra and published by Springer Science & Business Media. This book was released on 2009-11-16 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: "MDCT: From Protocols to Practice" tackles contemporary and topical issues in MDCT technology and applications. As an updated edition of MDCT: A Practical Approach, this volume offers new content as well as revised chapters from the previous volume. New chapters discuss important topics such as imaging of children and obese subjects, the use of contrast medium in pregnant women, coronary MDCT angiography, and PET/CT in abdominal and pelvic malignancies. Furthermore an Appendix with over 50 updated MDCT scanning protocols completes this publication. The book emphasizes the practical aspects of MDCT, making it an invaluable source of information for radiologists, residents, medical physicists, and radiology technologists in everyday clinical practice.
Download or read book Applications of X ray Computed Tomography in the Geosciences written by Florias Mees and published by Geological Society of London. This book was released on 2003 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray computed tomography (CT) is a technique that allows non-destructive imaging and quantification of internal features of objects. X-ray CT reveals differences in density and atomic composition and can therefore be used for the study of porosity, the relative distribution of contrasting solid phases and the penetration of injected solutions. In this book, various applications of X-ray CT in the geosciences are illustrated by papers covering a wide range of disciplines, including petrology, soil science, petroleum geology, geomechanics and sedimentology.
Download or read book X Ray Imaging written by Harry E. Martz and published by CRC Press. This book was released on 2016-10-26 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: While books on the medical applications of x-ray imaging exist, there is not one currently available that focuses on industrial applications. Full of color images that show clear spectrometry and rich with applications, X-Ray Imaging fills the need for a comprehensive work on modern industrial x-ray imaging. It reviews the fundamental science of x-ray imaging and addresses equipment and system configuration. Useful to a broad range of radiation imaging practitioners, the book looks at the rapid development and deployment of digital x-ray imaging system.
Download or read book Computed Tomography written by Jiang Hsieh and published by Society of Photo Optical. This book was released on 2009-01-01 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray computed tomography (CT) continues to experience rapid growth, both in basic technology and new clinical applications. Seven years after its first edition, Computed Tomography: Principles, Design, Artifacts, and Recent Advancements, Second Edition, provides an overview of the evolution of CT, the mathematical and physical aspects of the technology, and the fundamentals of image reconstruction algorithms. Image display is examined from traditional methods used through the most recent advancements. Key performance indices, theories behind the measurement methodologies, and different measurement phantoms in image quality are discussed. The CT scanner is broken down into components to provide the reader with an understanding of their function, their latest advances, and their impact on the CT system. General descriptions and different categories of artifacts, their causes, and their corrections are considered at length. Given the high visibility and public awareness of the impact of x-ray radiation, the second edition features a new chapter on x-ray dose and presents different dose reduction techniques ranging from patient handling, optimal data acquisition, image reconstruction, and post-process. Based on the advancements over the past five years, the second edition added new sections on cone beam reconstruction algorithms, nonconventional helical acquisition and reconstruction, new reconstruction approaches, and dual-energy CT. Finally, new to this edition is a set of problems for each chapter, providing opportunities to enhance reader comprehension and practice the application of covered material.
Download or read book Advances in X Ray Contrast written by P. Dawson and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: For all that new non-X-ray technologies such as MR and ultrasound and its various manifestations have made an enormous impact in recent years on the practice of medical imaging, the use of X-rays and X-ray contrast-enhancing agents has retained an important position at the heart of the process. Indeed, with its frequent requirements for high total dose regimes, CT has increased the use of contrast agents. Even helical/spiral CT which, it was initially argued, should reduce contrast as well as radiation loads, may actually require just as much or more of both because of the potential it offers for multi-phase scanning. Iodinated intravascular X-ray contrast agents, especially the more recently developed non-ionic agents, continue therefore to play a pivotal role in clinical imaging. These succinct and authoritative articles, originally appearing in the journal Advances in X-ray Contrast, range sufficiently widely for their compilation in this volume to be considered a mini-textbook on the water-soluble iodinated X-ray contrast agents and their applications. Each is written by an acknowledged and experienced expert in the field. They usefully cover the developmental history of the agents; defined risk factors, approaches to prophylaxis and, ultimately, of the treatment of adverse reactions; the interesting subject of supposed delayed reactions to contrast agents; the important organ-specific toxicities, cardiac toxicity, neurotoxicity and nephrotoxicity and high-dose toxicity as encountered in complex procedures; the sometimes special circumstances and occasional extreme conditions to which contrast agents may be exposed in Interventional Radiology; the special, in several ways, case of paediatric radiology; the controversial subject of thromboembolic phenomena in clinical angiography; and the precise role of contrast agents. As regards the practicalities of contrast administration regimes and imaging protocols it is really only in the area of CT that there is debate and controversy, and articles are included which cover CT of the liver, spleen and pancreas, and protocols for the new spiral/helical technology and even for the much less widely available electron-beam CT technology visualization. Pulmonary embolus diagnosis and protocols for contrast administration with this technology are also discussed.
Download or read book X ray Phase Contrast Imaging Using Near Field Speckles written by Marie-Christine Zdora and published by Springer Nature. This book was released on 2021-02-16 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents research on novel X-ray imaging methods that improve the study of specimens with small density differences, revealing their inner structure and density distribution. Exploiting the phase shift of X-rays in a material can significantly increase the image contrast compared to conventional absorption imaging. This thesis provides a practical guide to X-ray phase-contrast imaging with a strong focus on X-ray speckle-based imaging, the most recently developed phase-sensitive method. X-ray speckle-based imaging only requires a piece of abrasive paper in addition to the standard X-ray imaging setup. Its simplicity and robustness combined with the compatibility with laboratory X-ray sources, make it an ideal candidate for wide user uptake in a range of fields. An in-depth overview of the state of the art of X-ray speckle-based imaging and its latest developments is given in this thesis. It, furthermore, explores a broad range of applications, from X-ray optics characterisation, to biomedical imaging for 3D virtual histology and geological studies of volcanic rocks, demonstrating is promising potential. Moreover, the speckle-based technique is placed in the context of other phase-sensitive X-ray imaging methods to assist in the choice of a suitable method, hence serving as a guide and reference work for future users.
Download or read book World Congress of Medical Physics and Biomedical Engineering 2006 written by Sun I. Kim and published by Springer Science & Business Media. This book was released on 2007-05-07 with total page 4361 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the World Congress 2006, the fourteenth conference in this series, offer a strong scientific program covering a wide range of issues and challenges which are currently present in Medical physics and Biomedical Engineering. About 2,500 peer reviewed contributions are presented in a six volume book, comprising 25 tracks, joint conferences and symposia, and including invited contributions from well known researchers in this field.
Download or read book Modern Diagnostic X Ray Sources written by Rolf Behling and published by CRC Press. This book was released on 2021-04-18 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gives an up-to-date summary of X-ray source design for applications in modern diagnostic medical imaging. Lays a sound groundwork for education and advanced training in the physics of X-ray production and X-ray interactions with matter. Includes a historical overview of X-ray tube and generator development, including key achievements leading up to the current technological and economic state of the field.
Download or read book The Advanced Development of X Ray Computed Tomography Applications written by Richard H. Bossi and published by . This book was released on 1994 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of X-ray computed tomography (CT) for aircraft and aerospace structure and ancillary equipment has been investigated in the Advanced Development of X-Ray Computed Tomography Applications demonstration (CTAD) program sponsored by the NDE Branch of the Materials Directorate at the Air Force Wright Laboratory (WL). X-ray CT offers a new inspection capability for aircraft hardware that provides quantitative information on material density/constituents and dimensions. This capability has economic value as an engineering tool for improving the evaluation and control of materials and processes used in aircraft/aerospace structures. The CTAD effort has investigated a wide variety of application areas for CT. These include electronics, closed systems, castings, composites, and advanced materials and processes. Applications of CT in these areas include: configuration control, anomaly detection, dimensional measurements and material uniformity. By using the actual dimensional characteristics of features and anomalies in a component, and the material characteristics, such as density and elemental composition, that are derivable from the CT data, engineers can perform a variety of analyses to arrive at quantitative measurements that are of economical value to improving the overall product cycle from development to deployment. Until specifications requiring CT are implemented, CT will be employed primarily as a supplement to other NDE methodologies for engineering evaluations such as product development/ material characterization measurements, failure analysis and engineering problem solving, noninvasive micrography and geometry acquisition.
Download or read book X Ray Microscopy written by Chris Jacobsen and published by Cambridge University Press. This book was released on 2019-12-19 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete introduction to x-ray microscopy, covering optics, 3D and chemical imaging, lensless imaging, radiation damage, and applications.
Download or read book Handbook of X ray Imaging written by Paolo Russo and published by CRC Press. This book was released on 2017-12-14 with total page 1477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing chapter contributions from over 130 experts, this unique publication is the first handbook dedicated to the physics and technology of X-ray imaging, offering extensive coverage of the field. This highly comprehensive work is edited by one of the world’s leading experts in X-ray imaging physics and technology and has been created with guidance from a Scientific Board containing respected and renowned scientists from around the world. The book's scope includes 2D and 3D X-ray imaging techniques from soft-X-ray to megavoltage energies, including computed tomography, fluoroscopy, dental imaging and small animal imaging, with several chapters dedicated to breast imaging techniques. 2D and 3D industrial imaging is incorporated, including imaging of artworks. Specific attention is dedicated to techniques of phase contrast X-ray imaging. The approach undertaken is one that illustrates the theory as well as the techniques and the devices routinely used in the various fields. Computational aspects are fully covered, including 3D reconstruction algorithms, hard/software phantoms, and computer-aided diagnosis. Theories of image quality are fully illustrated. Historical, radioprotection, radiation dosimetry, quality assurance and educational aspects are also covered. This handbook will be suitable for a very broad audience, including graduate students in medical physics and biomedical engineering; medical physics residents; radiographers; physicists and engineers in the field of imaging and non-destructive industrial testing using X-rays; and scientists interested in understanding and using X-ray imaging techniques. The handbook's editor, Dr. Paolo Russo, has over 30 years’ experience in the academic teaching of medical physics and X-ray imaging research. He has authored several book chapters in the field of X-ray imaging, is Editor-in-Chief of an international scientific journal in medical physics, and has responsibilities in the publication committees of international scientific organizations in medical physics. Features: Comprehensive coverage of the use of X-rays both in medical radiology and industrial testing The first handbook published to be dedicated to the physics and technology of X-rays Handbook edited by world authority, with contributions from experts in each field
