Download or read book Development of Sub 50 fs Laser Oscillator with Mega watt Peak Power for Nonlinear Applications written by Sujith Manjooran and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: For several biomedical nonlinear applications mega-watt (MW) peak power lasers working in the near-infrared (NIR) wavelength range are desirable. A cost-effective diode-pumped sub-100-fs solid-state laser oscillator with MW peak power in the NIR wavelength range is not readily available on the commercial market. This thesis presents the successful development of several high power continuous wave (CW) and intense short pulse laser designs. Two laser gain media, namely Yb:KY(WO4)2 (Yb:KYW) and Yb: CaGdAlO4 (Yb:CALGO), were studied in this thesis. These solid-state laser crystals were end-pumped with high power diode laser at ~980 nm. Initially, the continuous wave operation of Yb:KYW with 9W of output power at 1045 nm was demonstrated. The developed Yb:KYW had the highest slope efficiency of 77.9% when compared to all other diode-pumped Yb:KYW lasers. At the same time the developed Yb:CALGO laser was capable of delivering tunable multi-watt output power in the wavelength range of approximately 1020 nm to 1070 nm. Based on these results two intense short pulse lasers were designed and developed in this thesis. The first one was a sub-50-fs Kerr-lens and saturable absorber (KLAS) mode-locked Yb:CALGO laser oscillator with a repetition rate of 42.3 MHz. The highest peak power achieved for 45-fs pulses directly from the oscillator was 1.7 MW. The shortest generated pulses were 38-fs with 187 kW of peak power. The second laser was a sub-100-fs Kerr-lens mode-locked (KLM) Yb:CALGO laser with a low repetition rate of 10.2 MHz. The oscillator produced 650 mW of average output power with pulse duration of 66 fs. It also generated 1 W of average power with pulse duration of 72 fs. This corresponds to pulse energy of 64 nJ with a peak power of 0.97 MW and 98 nJ with the peak power of 1.36 MW, respectively. Some of the nonlinear applications of the high intense laser pulses were studied in the final section. Phase-matching conditions of three periodically poled crystals (PPKTP, MgO:PPcLN and MgO:PPSLT) for use in femtosecond optical parametric oscillators (OPO) to generate wavelength tunability in the NIR range were studied. The developed intense short pulse lasers in this project have numerous applications not only in biomedical research but also in fundamental science and industry.
Download or read book 82nd Conference on Glass Problems Volume 270 written by S. K. Sundaram and published by John Wiley & Sons. This book was released on 2022-06-15 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest issue in the industry-leading Ceramic Transactions series The most up to date entry in the Ceramic Transactions series published by The American Ceramic Society (ACerS), Ceramic Transactions: Volume 270 delivers the newest research, data, and information relevant to advanced ceramics and composites, electronic ceramics, energy materials, biomaterials, environmental issues, waste management, and nanotechnology.
Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 2240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Conference on Lasers and Electro optics Europe written by and published by . This book was released on 2005 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vertical External Cavity Surface Emitting Lasers written by Michael Jetter and published by John Wiley & Sons. This book was released on 2021-09-16 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vertical External Cavity Surface Emitting Lasers Provides comprehensive coverage of the advancement of vertical-external-cavity surface-emitting lasers Vertical-external-cavity surface-emitting lasers (VECSELs) emit coherent light from the infrared to the visible spectral range with high power output. Recent years have seen new device developments – such as the mode-locked integrated (MIXSEL) and the membrane external-cavity surface emitting laser (MECSEL) – expand the application of VECSELs to include laser cooling, spectroscopy, telecommunications, biophotonics, and laser-based displays and projectors. In Vertical External Cavity Surface Emitting Lasers: VECSEL Technology and Applications, leading international research groups provide a comprehensive, fully up-to-date account of all fundamental and technological aspects of vertical external cavity surface emitting lasers. This unique book reviews the physics and technology of optically-pumped disk lasers and discusses the latest developments of VECSEL devices in different wavelength ranges. Topics include OP-VECSEL physics, continuous wave (CW) lasers, frequency doubling, carrier dynamics in SESAMs, and characterization of nonlinear lensing in VECSEL gain samples. This authoritative volume: Summarizes new concepts of DBR-free and MECSEL lasers for the first time Covers the mode-locking concept and its application Provides an overview of the emerging concept of self-mode locking Describes the development of next-generation OPS laser products Vertical External Cavity Surface Emitting Lasers: VECSEL Technology and Applications is an invaluable resource for laser specialists, semiconductor physicists, optical industry professionals, spectroscopists, telecommunications engineers and industrial physicists.
Download or read book Femtosecond Technology for Technical and Medical Applications written by Friedrich Dausinger and published by Springer Science & Business Media. This book was released on 2004-10-14 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the principles and applications of femtosecond lasers, especially applied to medicine and to production technology. The advantages and problems of ultrashort laser pulses are discussed in more detail in the context of applications in the micro-machining of technical materials such as drilling, surface structuring and cutting, in medical use like dental, ophthalmologic, neurological and otolaryngological applications, in metrology, and in the generation of x-rays. Safety aspects are also considered.
Download or read book A New Generation of High Power Waveform Controlled Few Cycle Light Sources written by Marcus Seidel and published by Springer. This book was released on 2019-02-01 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents first successful experiments to carrier-envelope-phase stabilize a high-power mode-locked thin-disk oscillator and to compress the pulses emitted from this laser to durations of only a few-optical cycles. Moreover, the monograph introduces several methods to achieve power-scalability of compression and stabilization techniques. All experimental approaches are compared in detail and may serve as a guideline for developing high-power waveform controlled, few-cycle light sources which offer tremendous potential to exploit extreme nonlinear optical effects at unprecedentedly high repetition rates and to establish table-top infrared light sources with a unique combination of brilliance and bandwidth. As an example, the realization of a multi-Watt, multi-octave spanning, mid-infrared femtosecond source is described. The thesis starts with a basic introduction to the field of ultrafast laser oscillators. It subsequently presents additional details of previously published research results and establishes a connection between them. It therefore addresses both newcomers to, and experts in the field of high-power ultrafast laser development.
Download or read book 2003 Conference on Lasers and Electro Optics Europe written by Conference on Lasers and Electro-optics Europe and published by IEEE Standards Office. This book was released on 2003 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Third Generation Femtosecond Technology written by Hanieh Fattahi and published by Springer. This book was released on 2015-08-28 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis offers a thorough and informative study of high-power, high-energy optical parametric chirped pulse amplifications systems, the foundation of the next generation of femtosecond laser technology. Starting from the basics of the linear processes involved and the essential design considerations, the author clearly and systematically describes the various prerequisites of the nonlinear optical systems expected to drive attosecond physics in the coming decade. In this context, he gives an overview of methods for generating the broadband and carrier-envelope-phase stable seed pulses necessary for producing controlled electric-field waveforms in the final system; provides a guide to handling the high-power, high-energy pump lasers required to boost the pulse energy to the desired operating range; describes the design of the nonlinear optical system used to perform the amplification, including modes of operation for ultra-broadband infrared-visible pulses or narrowband (yet still ultrafast) pulses tunable over multiple octaves; and finally presents a prospective high-energy field synthesizer based upon these techniques. As such, this work is essential reading for all scientists interested in utilizing the newest generation of ultrafast systems.
Download or read book Op Amps for Everyone written by Ron Mancini and published by Newnes. This book was released on 2003 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: The operational amplifier ("op amp") is the most versatile and widely used type of analog IC, used in audio and voltage amplifiers, signal conditioners, signal converters, oscillators, and analog computing systems. Almost every electronic device uses at least one op amp. This book is Texas Instruments' complete professional-level tutorial and reference to operational amplifier theory and applications. Among the topics covered are basic op amp physics (including reviews of current and voltage division, Thevenin's theorem, and transistor models), idealized op amp operation and configuration, feedback theory and methods, single and dual supply operation, understanding op amp parameters, minimizing noise in op amp circuits, and practical applications such as instrumentation amplifiers, signal conditioning, oscillators, active filters, load and level conversions, and analog computing. There is also extensive coverage of circuit construction techniques, including circuit board design, grounding, input and output isolation, using decoupling capacitors, and frequency characteristics of passive components. The material in this book is applicable to all op amp ICs from all manufacturers, not just TI. Unlike textbook treatments of op amp theory that tend to focus on idealized op amp models and configuration, this title uses idealized models only when necessary to explain op amp theory. The bulk of this book is on real-world op amps and their applications; considerations such as thermal effects, circuit noise, circuit buffering, selection of appropriate op amps for a given application, and unexpected effects in passive components are all discussed in detail. *Published in conjunction with Texas Instruments *A single volume, professional-level guide to op amp theory and applications *Covers circuit board layout techniques for manufacturing op amp circuits.
Download or read book Ultrafast Lasers written by Martin E. Fermann and published by CRC Press. This book was released on 2002-10-25 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering high-energy ultrafast amplifiers and solid-state, fiber, and diode lasers, this reference examines recent developments in high-speed laser technology. It presents a comprehensive survey of ultrafast laser technology, its applications, and future trends in various scientific and industrial areas. Topics include: micromachining applications for metals, dielectrics, and biological tissue; advanced electronics and semiconductor processing; optical coherence tomography; multiphoton microscopy; optical sampling and scanning; THz generation and imaging; optical communication systems; absolute phase control of optical signals; and more.
Download or read book Digest of Technical Papers written by and published by . This book was released on 1986 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Light Sources and Lasers written by Mark Csele and published by John Wiley & Sons. This book was released on 2011-09-23 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to the burgeoning field of photonics The field of photonics is finding increasing applications across a broad range of industries. While many other books provide an overview of the subject, Fundamentals of Light Sources and Lasers closes a clear gap in the current literature by concentrating on the principles of laser operation as well as providing coverage of important concepts necessary to fully understand the principles involved. The scope of the book includes everything a professional needs to get up to speed in the field, as well as all the material necessary to serve as an excellent introductory laser course for students. Ideal for self-study as well as structured coursework, the book offers thorough coverage of: * The nature of light and atomic emission * Basic quantum mechanics and laser processes * Cavity optics, fast-pulse production, and nonlinear optical phenomena * Laser technology, including visible gas lasers, UV gas lasers, infrared gas lasers, solid-state lasers, semiconductor lasers and tunable dye lasers Extensive real-world case studies are included to help readers appreciate the practical applications of the material covered. *An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.
Download or read book High Power Lasers Science and Engineering written by R. Kossowsky and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the thirty years since the invention of the CO2 gas laser, the major design issue has shifted from how to obtain the desired power level to how to achieve reliable operation. At the same time, the opening of many laser development facilities in the Former Soviet Union has allowed their achievements and design approaches to be understood and appreciated for the first time. Further, the industrial laser user community has identified a number of emerging applications at higher power levels (15-20 kW) than are attainable by most commercial devices. In High Power Lasers - Science and Engineering, the designers, developers and users of high-power gas laser systems discuss design approaches, methods of enhancing performance, new applications, and user requirements.
Download or read book Springer Handbook of Lasers and Optics written by Frank Träger and published by Springer Science & Business Media. This book was released on 2012-05-05 with total page 1704 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition features numerous updates and additions. Especially 4 new chapters on Fiber Optics, Integrated Optics, Frequency Combs and Interferometry reflect the changes since the first edition. In addition, major complete updates for the chapters: Optical Materials and Their Properties, Optical Detectors, Nanooptics, and Optics far Beyond the Diffraction Limit. Features Contains over 1000 two-color illustrations. Includes over 120 comprehensive tables with properties of optical materials and light sources. Emphasizes physical concepts over extensive mathematical derivations. Chapters with summaries, detailed index Delivers a wealth of up-to-date references.
Download or read book Conference Papers Index written by and published by . This book was released on 1988 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monthly. Papers presented at recent meeting held all over the world by scientific, technical, engineering and medical groups. Sources are meeting programs and abstract publications, as well as questionnaires. Arranged under 17 subject sections, 7 of direct interest to the life scientist. Full programs of meetings listed under sections. Entry gives citation number, paper title, name, mailing address, and any ordering number assigned. Quarterly and annual indexes to subjects, authors, and programs (not available in monthly issues).
Download or read book High Energy and Short Pulse Lasers written by Richard Viskup and published by BoD – Books on Demand. This book was released on 2016-09-07 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives the readers an introduction to experimental and theoretical knowledge acquired by large-scale laser laboratories that are dealing with extra-high peak power and ultrashort laser pulses for research of terawatt (TW), petawatt (PW), or near-future exawatt (EW) laser interactions, for soft X-ray sources, for acceleration of particles, or for generation of hot dense thermal plasma for the laser fusion. The other part of this book is dealing with the small-scale laser laboratories that are using for its research on commercial sources of laser radiation, nanosecond (ns), picosecond (ps), or femtosecond (fs) laser pulses, either for basic research or for more advanced applications. This book is divided into six main sections dealing with short and ultrashort laser pulses, laser-produced soft X-ray sources, large-scale high-power laser systems, free-electron lasers, fiber-based sources of short optical pulse, and applications of short pulse lasers. In each chapter readers can find fascinating topics related to the high energy and/or short pulse laser technique. Individual chapters should serve the broad spectrum of readers of different expertise, layman, undergraduate and postgraduate students, scientists, and engineers, who may in this book find easily explained fundamentals as well as advanced principles of particular subjects related to these phenomena.
