Download or read book Development of Standards to Evaluate Analyze and Retrofit Mass Wall Assemblies and Steep Sloped Roof Assemblies of Existing Buildings for Compliance with Energy Codes written by Rex A. Cyphers and published by . This book was released on 2017 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: The performance of historical buildings with mass masonry walls and ventilated attics has proven effective over time. By nature, the masonry wall is permitted to dry to both the interior and exterior, preventing moisture accumulation within the assembly. For attic spaces, the air movement under the roof deck has the same effect. With revisions to the energy codes now requiring insulation and continuous air barriers within the building envelope, the thermal and vapor-resistant properties of the assemblies are changing. As such, the assemblies of existing buildings must be evaluated prior to rehabilitation to ensure that the addition of insulation or vapor-resistant materials do not cause moisture-related issues over the life of the building. Two standards are currently under development to provide guidance on these topics: ASTM E3069, Standard Guide for Evaluation and Rehabilitation of Mass Masonry Walls for Changes to the Thermal and Moisture Properties of the Wall, and ASTM WK54379, Standard Guide for the Evaluation, Rehabilitation and Retrofit of Existing Steep Sloped Roof Assemblies. This paper discusses the application of these standards and the need for such guidelines based on the changes to the energy codes to improve the overall energy performance of existing mass masonry walls and steep sloped roofs.
Download or read book Survey of Existing Performance Requirements in Codes and Standards for Light frame Construction written by Gerald E. Sherwood and published by . This book was released on 1980 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deep Energy Retrofit written by Alexander Zhivov and published by Springer Nature. This book was released on 2020-07-13 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides detailed information on how to set up Deep Energy Retrofits (DERs) in public buildings, and shares in-depth insights into the current status of the major technologies, strategies and best practice examples of how to cost-effectively combine them. Case studies from the U.S.A. and Europe show that that Deep Energy Retrofit can be achieved with a limited core technologies bundle readily available on the market. Characteristics of some of these core technology measures depend on the technologies available on an individual nation’s market, on the minimum requirements of national standards, and on economics (as determined by a life cycle cost analysis). Also, requirements to building envelope-related technologies (e.g., insulation levels, windows, vapor and water barriers, and requirements for building airtightness) depend on specific climate conditions. This Guide provides best practice examples of how to apply these technologies in different construction situations. High levels of energy use reduction using core technology bundles along with improvements in indoor climate and thermal comfort can be only achieved when a Deep Energy Retrofit adopts a quality assurance process. In addition to design, construction, commissioning, and post-occupancy phases of the quality assurance process, the Guide emphasizes the importance of clearly and concisely formulating and documenting the Owner’s goals, expectations, and requirements for the renovated building during development of the statement of work. Another important component of the quality assurance process is a procurement phase, during which bidders’ qualifications, their understanding of the scope of work and its requirements, and their previous experience are analyzed. The building sector holds the potential for tremendous improvements in terms of energy efficiency and reducing carbon emissions, and energy retrofits to the existing building stock represent a significant opportunity in the transition to a low-carbon future. Moreover, investing in highly efficient building materials and systems can replace long-term energy imports, contribute to cost cutting, and create a wealth of new jobs. Yet, while the technologies needed in order to improve energy efficiency are readily available, significant progress has not yet been made, and “best practices” for implementing building technologies and renewable energy sources are still relegated to small “niche” applications. Offering essential information on Deep Energy Retrofits, the book offers a valuable asset for architects, public authorities, project developers, and engineers alike.
Download or read book Rapid Visual Screening of Buildings for Potential Seismic Hazards Supporting Documentation written by and published by Government Printing Office. This book was released on 2015 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Rapid Visual Screening (RVS) handbook can be used by trained personnel to identify, inventory, and screen buildings that are potentially seismically vulnerable. The RVS procedure comprises a method and several forms that help users to quickly identify, inventory, and score buildings according to their risk of collapse if hit by major earthquakes. The RVS handbook describes how to identify the structural type and key weakness characteristics, how to complete the screening forms, and how to manage a successful RVS program.
Download or read book High Performance Building Guidelines written by Andrea Woodner and published by DIANE Publishing. This book was released on 2000 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: High performance buildings maximize operational energy savings; improve comfort, health, & safety of occupants & visitors; & limit detrimental effects on the environment. These Guidelines provide instruction in the new methodologies that form the underpinnings of high performance buildings. They further indicate how these practices may be accommodated within existing frameworks of capital project administration & facility management. Chapters: city process; design process; site design & planning; building energy use; indoor environment; material & product selection; water mgmt.; construction admin.; commissioning; & operations & maintenance.
Download or read book Building Adaptation written by James Douglas and published by Routledge. This book was released on 2006-08-11 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: As existing buildings age, nearly half of all construction activity in Britain is related to maintenance, refurbishment and conversions. Building adaptation is an activity that continues to make a significant contribution to the workload of the construction industry. Given its importance to sustainable construction, the proportion of adaptation works in relation to new build is likely to remain substantial for the foreseeable future, especially in the developed parts of the world. Building Adaptation, Second Edition is intended as a primer on the physical changes that can affect older properties. It demonstrates the general principles, techniques, and processes needed when existing buildings must undergo alteration, conversion, extension, improvement, or refurbishment. The publication of the first edition of Building Adaptation reflected the upsurge in refurbishment work. The book quickly established itself as one of the core texts for building surveying students and others on undergraduate and postgraduate built environment courses. This new edition continues to provide a comprehensive introduction to all the key issues relating to the adaptation of buildings. It deals with any work to a building over and above maintenance to change its capacity, function or performance.
Download or read book Minimum Design Loads for Buildings and Other Structures written by American Society of Civil Engineers and published by Amer Society of Civil Engineers. This book was released on 2000 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Principles and Practices for Retrofitting Flood Prone Residential Structures written by and published by FEMA. This book was released on 2001 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cal OSHA Pocket Guide for the Construction Industry written by and published by . This book was released on 2015-01-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cal/OSHA Pocket Guide for the Construction Industry is a handy guide for workers, employers, supervisors, and safety personnel. This latest 2011 edition is a quick field reference that summarizes selected safety standards from the California Code of Regulations. The major subject headings are alphabetized and cross-referenced within the text, and it has a detailed index. Spiral bound, 8.5 x 5.5"
Download or read book Final Report on the Collapse of the World Trade Center Towers written by and published by . This book was released on 2005 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the final report of the National Institute of Standards and Technology (NIST) investigation of the collapse of the World Trade Center (WTC) towers, conducted under the National Construction Safety Team Act.
Download or read book Homeowner s Guide to Retrofitting written by and published by . This book was released on 1998 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ICC Performance Code for Buildings and Facilities 2015 written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Residential Rehabilitation Inspection Guide written by U.S. Department of Housing and Urban Development and published by Createspace Independent Publishing Platform. This book was released on 2014-05-19 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide provides step-by-step technical information for evaluating a residential building's site, exterior, interior, and structural, electrical, plumbing, and HVAC systems.
Download or read book 2021 International Energy Conservation Code written by International Code Council and published by . This book was released on 2020-12-11 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2021 IECC addresses energy efficiency on several fronts including cost, energy usage, use of natural resources and the impact of energy usage on the environment.
Download or read book Canadian Wood frame House Construction written by John Burrows and published by Central Mortgage and Housing Corporation. This book was released on 2005 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handy reference book walks you through the complete construction of a wood frame house, from excavation to the finishing touches. It is updated to the current edition of the National Building code. This is the most comprehensive, easy-to-use reference book for the construction of wood-frame houses. Canadian Wood-Frame House Construction features illustrations tables, plan ahead notes, healthy housing insights to minimize and protect occupants and environment.
Download or read book 2010 ADA Standards for Accessible Design written by Department Justice and published by Createspace Independent Publishing Platform. This book was released on 2014-10-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: (a) Design and construction. (1) Each facility or part of a facility constructed by, on behalf of, or for the use of a public entity shall be designed and constructed in such manner that the facility or part of the facility is readily accessible to and usable by individuals with disabilities, if the construction was commenced after January 26, 1992. (2) Exception for structural impracticability. (i) Full compliance with the requirements of this section is not required where a public entity can demonstrate that it is structurally impracticable to meet the requirements. Full compliance will be considered structurally impracticable only in those rare circumstances when the unique characteristics of terrain prevent the incorporation of accessibility features. (ii) If full compliance with this section would be structurally impracticable, compliance with this section is required to the extent that it is not structurally impracticable. In that case, any portion of the facility that can be made accessible shall be made accessible to the extent that it is not structurally impracticable. (iii) If providing accessibility in conformance with this section to individuals with certain disabilities (e.g., those who use wheelchairs) would be structurally impracticable, accessibility shall nonetheless be ensured to persons with other types of disabilities, (e.g., those who use crutches or who have sight, hearing, or mental impairments) in accordance with this section.
Download or read book Seismic Rehabilitation of Existing Buildings written by American Society of Civil Engineers and published by ASCE Publications. This book was released on 2007 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standard ASCE/SEI 41-06 presents the latest generation of performance-based seismic rehabilitation methodology.
