Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.
Download or read book Titanium Powder Metallurgy written by Ma Qian and published by Butterworth-Heinemann. This book was released on 2015-02-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. - Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy - Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. - Includes a critical review of the current key fundamental and technical issues of Ti PM. - Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys
Download or read book Development and Application of Biomedical Titanium Alloys written by Liqiang Wang and published by Bentham Science Publishers. This book was released on 2018-04-05 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium and its alloys have been widely used as biomedical implant materials due to their low density, good mechanical properties, superior corrosion resistance and biocompatibility when compared with other metallic biomaterials such as Co–Cr alloys and stainless steels. Recently, β-type titanium alloys have been increasingly considered as excellent implant materials because of the remarkable combination of high strength-to-weight ratio, good fatigue resistance, relatively low Young's modulus, good biocompatibility and high corrosion resistance relative to conventional titanium biomaterials. This book covers recent information about biomedical titanium alloy development and 3D printing. Chapters describe the processing, microstructure, mechanical properties and corrosion properties in detail. Information about the surface modification of titanium alloys for biomedical applications, and manufacturing of titanium alloys by new technologies (such as selective laser melting and electron beam melting), is also presented. Readers will learn about the various types of biomedical titanium alloys, their advantages and disadvantages, their fabrication methods and medical applications. This book is a useful handbook for biomedical engineers, metallurgists and biotechnicians seeking information about titanium-based alloys for biomaterials research and development.
Download or read book New Materials for Next Generation Commercial Transports written by Committee on New Materials for Advanced Civil Aircraft and published by National Academies Press. This book was released on 1996-03-29 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major objective of this book was to identify issues related to the introduction of new materials and the effects that advanced materials will have on the durability and technical risk of future civil aircraft throughout their service life. The committee investigated the new materials and structural concepts that are likely to be incorporated into next generation commercial aircraft and the factors influencing application decisions. Based on these predictions, the committee attempted to identify the design, characterization, monitoring, and maintenance issues that are critical for the introduction of advanced materials and structural concepts into future aircraft.
Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Additive Manufacturing of Titanium Alloys written by Bhaskar Dutta and published by Butterworth-Heinemann. This book was released on 2016-06-17 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of Titanium Alloys: State of the Art, Challenges and Opportunities provides alternative methods to the conventional approach for the fabrication of the majority of titanium components produced via the cast and wrought technique, a process which involves a considerable amount of expensive machining. In contrast, the Additive Manufacturing (AM) approach allows very close to final part configuration to be directly fabricated minimizing machining cost, while achieving mechanical properties at least at cast and wrought levels. In addition, the book offers the benefit of significant savings through better material utilization for parts with high buy-to-fly ratios (ratio of initial stock mass to final part mass before and after manufacturing). As titanium additive manufacturing has attracted considerable attention from both academicians and technologists, and has already led to many applications in aerospace and terrestrial systems, as well as in the medical industry, this book explores the unique shape making capabilities and attractive mechanical properties which make titanium an ideal material for the additive manufacturing industry. - Includes coverage of the fundamentals of microstructural evolution in titanium alloys - Introduces readers to the various Additive Manufacturing Technologies, such as Powder Bed Fusion (PBF) and Directed Energy Deposition (DED) - Looks at the future of Titanium Additive Manufacturing - Provides a complete review of the science, technology, and applications of Titanium Additive Manufacturing (AM)
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Complete Casting Handbook Metal Casting Processes Metallurgy Techniques and Design written by John Campbell and published by Butterworth-Heinemann. This book was released on 2017-11-13 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete Casting Handbook is the result of a long-awaited update, consolidation and expansion of expert John Campbell s market-leading casting books into one essential resource for metallurgists and foundry professionals who design, specify or manufacture metal castings. The first single-volume guide to cover modern principles and processes in such breadth and depth whilst retaining a clear, practical focus, it includes: A logical, two-part structure, breaking the contents down into casting metallurgy and casting manufacture Established, must-have information, such as Campbell s 10 Rules for successful casting manufacture New chapters on filling system design, melting, molding, and controlled solidification techniques, plus extended coverage of a new approach to casting metallurgy Providing in-depth casting knowledge and process know-how, from the noteworthy career of an industry-leading authority, Complete Casting Handbook delivers the expert advice needed to help you make successful and profitable castings. Long-awaited update, consolidation and expansion of expert John Campbell s market-leading casting books into one essential handbook Separated into two parts, casting metallurgy and casting manufacture, with extended coverage of casting alloys and new chapters on filling system design, melting, moulding and controlled solidification techniques to compliment the renowned Campbell 10 Rules Delivers the expert advice that engineers need to make successful and profitable casting decisions "
Download or read book Research Reviews written by and published by . This book was released on 1953 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machining of Titanium Alloys written by J. Paulo Davim and published by Springer. This book was released on 2014-07-05 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.
Download or read book High Performance Metallic Materials for Cost Sensitive Applications written by F. H. Froes and published by John Wiley & Sons. This book was released on 2013-09-18 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings examine the most recent advances and best practices in structural materials selection, design, and manufacturing for producing affordable components, with a focus on titanium, aluminum, and other advanced metallic materials. This volume discusses melting, casting, powder metallurgy, forging, forming, extrusion, and machining, as well as processing advances, innovative processing techniques, process modeling and materials by design, and new alloys, as well as related processing-microstructure-properties-performance-cost studies. This book can be purchased either on CD-ROM, or portable document format (PDF). PDF and CD-ROM books can be viewed using the free Adobe Acrobat Reader Program on Windows, Macintosh, Unix, and other systems. Access Acrobat Reader through the TMS Document Center at http://doc.tms.org. PDF and CD-ROM books are completely text-searchable, allowing users to locate important information quickly by typing in key words. A collection of papers from the 2002 TMS Annual Meeting and Exhibition held in Seattle, Washington, February 17-21, 2002.
Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hearings written by United States. Congress. House. Committee on Appropriations and published by . This book was released on 1961 with total page 2330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgy and Design of Alloys with Hierarchical Microstructures written by Krishnan K. Sankaran and published by Elsevier. This book was released on 2017-06-14 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgy and Design of Alloys with Hierarchical Microstructures covers the fundamentals of processing-microstructure-property relationships and how multiple properties are balanced and optimized in materials with hierarchical microstructures widely used in critical applications. The discussion is based principally on metallic materials used in aircraft structures; however, because they have sufficiently diverse microstructures, the underlying principles can easily be extended to other materials systems. With the increasing microstructural complexity of structural materials, it is important for students, academic researchers and practicing engineers to possess the knowledge of how materials are optimized and how they will behave in service. The book integrates aspects of computational materials science, physical metallurgy, alloy design, process design, and structure-properties relationships, in a manner not done before. It fills a knowledge gap in the interrelationships of multiple microstructural and deformation mechanisms by applying the concepts and tools of designing microstructures for achieving combinations of engineering properties—such as strength, corrosion resistance, durability and damage tolerance in multi-component materials—used for critical structural applications. - Discusses the science behind the properties and performance of advanced metallic materials - Provides for the efficient design of materials and processes to satisfy targeted performance in materials and structures - Enables the selection and development of new alloys for specific applications based upon evaluation of their microstructure as illustrated in this work
Download or read book 1995 Federal Research and Development Program in Materials Science and Technology written by National Science and Technology Council (U.S.). Materials Technology Subcommittee and published by . This book was released on 1995 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Resources for Freedom written by United States. President's Materials Policy Commission and published by . This book was released on 1952 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt:
