Download or read book Development of in Situ Oil Viscosity Monitoring Technique written by Shawn C. Dancik and published by . This book was released on 1998 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development of an Ultrasonic Sensing Technique to Measure Lubricant Viscosity in Engine Journal Bearing In Situ written by Michele Schirru and published by Springer. This book was released on 2017-02-21 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents a novel ultrasonic instrument for non-invasive and in-situ characterization of journal bearing lubricant viscosity. In particular, the application to journal bearings is described by non-invasively measuring the viscosity and localized power losses throughout operation. This ultrasonic viscometer is based on the reflection of polarized shear waves from a thin resonating coating layer to increase the measurement sensitivity, in comparison to conventional ultrasonic methods. This instrument allows for a full engine oil viscoelastic characterization in-situ. The book investigates the effects of temperature, pressure and shear rate, and describes in detail the ultrasonic setup and method. Further, it demonstrates that the same technique can be applied similarly to monitor the lubrication of other engine components. As such, it offers a unique instrument that can drive the research of oil formulations to improve engine performance and fulfill the requirements of international fuel economy regulations.
Download or read book Recent Developments in Durability Analysis of Composite Systems written by H. Dardon and published by CRC Press. This book was released on 2022-01-26 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers from these proceedings address experimental and analytical methods for the characterization and analysis of modern composite and adhesive systems. They have been produced to provide understanding that can be used to design safe, reliable engineering components.
Download or read book Impedance Spectroscopy written by Vadim F. Lvovich and published by John Wiley & Sons. This book was released on 2012-07-03 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a balance of theoretical considerations and practical problem solving of electrochemical impedance spectroscopy. This book incorporates the results of the last two decades of research on the theories and applications of impedance spectroscopy, including more detailed reviews of the impedance methods applications in industrial colloids, biomedical sensors and devices, and supercapacitive polymeric films. The book covers all of the topics needed to help readers quickly grasp how to apply their knowledge of impedance spectroscopy methods to their own research problems. It also helps the reader identify whether impedance spectroscopy may be an appropriate method for their particular research problem. This includes understanding how to correctly make impedance measurements, interpret the results, compare results with expected previously published results form similar chemical systems, and use correct mathematical formulas to verify the accuracy of the data. Unique features of the book include theoretical considerations for dealing with modeling, equivalent circuits, and equations in the complex domain, review of impedance instrumentation, best measurement methods for particular systems and alerts to potential sources of errors, equations and circuit diagrams for the most widely used impedance models and applications, figures depicting impedance spectra of typical materials and devices, extensive references to the scientific literature for more information on particular topics and current research, and a review of related techniques and impedance spectroscopy modifications.
Download or read book Shreir s Corrosion written by and published by Elsevier. This book was released on 2009-02-27 with total page 3652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume reference work builds upon the success of past editions of Elsevier’s Corrosion title (by Shreir, Jarman, and Burstein), covering the range of innovations and applications that have emerged in the years since its publication. Developed in partnership with experts from the Corrosion and Protection Centre at the University of Manchester, Shreir’s Corrosion meets the research and productivity needs of engineers, consultants, and researchers alike. Incorporates coverage of all aspects of the corrosion phenomenon, from the science behind corrosion of metallic and non-metallic materials in liquids and gases to the management of corrosion in specific industries and applications Features cutting-edge topics such as medical applications, metal matrix composites, and corrosion modeling Covers the benefits and limitations of techniques from scanning probes to electrochemical noise and impedance spectroscopy
Download or read book Advances in Fluid Solid Coupling Processes between Fractures and Porous Rocks Experimental and Numerical Investigation written by Shiming Wei and published by Frontiers Media SA. This book was released on with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing is the key measure for improving recovery of unconventional oil and gas reservoirs. Prediction of fracture morphology and productivity after fracturing is critical for fracturing design and optimization. The hydraulic fracturing process is to open porous rocks by artificially injecting highly compressed fluid, and the hydraulic fracture will be closed under the compaction of in-situ stress during the production process. In this regard, hydraulic fracturing and production processes are both fluid-solid coupling processes involving fractures and porous rocks. This Research Topic aims to gather the latest studies addressing how to improve the prediction accuracy of hydraulic fracturing morphology and post-fracturing productivity through experimental and numerical investigation. The experimental research shall underline hydraulic fracturing and fracture conductivity experiments and associated experimental methods, while the numerical research shall pay particular attention to discrete fracture network models, including the calculation efficiency and accuracy as well as the applicability.
Download or read book Heavy Oils written by Satinder Chopra and published by SEG Books. This book was released on 2010 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reservoir characterization requires integration of engineering, geology, and geophysics, with rock physics supplying a key link. In this volume, geophysical methods, especially time-lapse 3D seismic, are emphasized, and a range of enhanced oil-recovery methods (EOR) are discussed, showing the need to accurately describe a reservoir before and after production.
Download or read book On line Condition Monitoring in Industrial Lubrication and Tribology written by Nikolai K. Myshkin and published by Springer. This book was released on 2018-08-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers readers a concise yet comprehensive introduction to a set of diagnostic methods for on-line condition monitoring of lubricated tribosystems used in industry. It covers the latest trends in on-line tribodiagnostics, an important and rapidly developing area of tribology. The book also reports on new tools as they have been developed and applied by the authors. A special emphasis is given to the physical fundamentals of opto-magnetic detectors, ferro-analyzers and analyzers of metal particles in lubricated tribosystems, as well as fluorescence methods for real-time oil monitoring in compressors, hydraulic systems and electrical transformers. Further, the book discusses other important issues such as the monitoring of water content in oil, and presents techniques for measuring soot content in oil in diesel engine oils. Lastly, it describes the modular intelligent (SMART) diagnostic system for vehicles. Mainly intended for researchers, industrial and automotive engineers developing cost-effective techniques and sensors for the on-line monitoring of lubricating oil, the book also offers a valuable source of information for students and project managers in the manufacturing, energy, oil and gas, and automotive industry.
Download or read book Development of ASTM Standard Test Methods for Measuring Engine Oil Viscosity Using Rotational Viscometers at High Temperature and High Shear Rates written by RB. Rhodes and published by . This book was released on 1989 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two ASTM standards have been developed for the measurement of engine oil viscosity at high temperature (150°C) and high shear rate (106 s-1) using rotational viscometers. Both methods resulted from significant international participation at the working group level. One test method resulted from work done primarily within ASTM Committee D-2, Subcommittee 7, using the tapered bearing simulator. The other resulted from work done within the Co-ordinating European Council (CEC) using the Ravenfield viscometer, herein called the tapered plug viscometer. The chronological development of each standard is reviewed, and test method and precision are compared. Expansion of measurement capabilities are discussed with regard to the study of lubricant rheology and engine performance.
Download or read book Ultrahigh Pressure Mineralogy written by Russell J. Hemley and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-12-17 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 37 of Reviews in Mineralogy, divided into three sections, begins with an overview (Chapter 1) of the remarkable advances in the ability to subject minerals-not only as pristine single-crystal samples but also complex, natural mineral assemblages-to extreme pressure-temperature conditions in the laboratory. These advances parallel the development of an arsenal of analytical methods for measuring mineral behavior under those conditions. This sets the stage for section two (Chapters 2-8) which focuses on high-pressure minerals in their geological setting as a function of depth. This top-down approach begins with what we know from direct sampling of high-pressure minerals and rocks brought to the surface to detailed geophysical observations of the vast interior. The third section (Chapters 9-19) presents the material fundamentals, starting from properties of a chemical nature, such as crystal chemistry, thermochemistry, element partitioning, and melting, and moving toward the domain of mineral physics such as melt properties, equations of state, elasticity, rheology, vibrational dynamics, bonding, electronic structure, and magnetism. The Review thus moves from the complexity of rocks to their mineral components and finally to fundamental properties arising directly from the play of electrons and nuclei. This volume was prepared for a short course by the same title, organized by Russell J. Hemley and Ho-kwang Mao and sponsored by the Mineralogical Society of America, December 4-6, 1998 on the campus of the University of California at Davis.
Download or read book Ullmann s Energy written by Wiley-VCH and published by John Wiley & Sons. This book was released on 2017-06-01 with total page 1442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume handbook contains a wealth of information on energy sources, energy generation and storage, fossil and renewable fuels as well as the associated processing technology. Fossil as well as renewable fuels, nuclear technology, power generation and storage technologies are treated side by side, providing a unique overview of the entire global energy industry. The result is an in-depth survey of industrial-scale energy technology. Your personal ULLMANN’S: A carefully selected "best of" compilation of topical articles brings the vast knowledge of the Ullmann’s encyclopedia to the desks of energy and process engineers Chemical and physical characteristics, production processes and production figures, main applications, toxicology and safety information are all found here in one single resource New or updated articles include classical topics such as coal technologies, oil and gas as well as cutting-edge technologies like biogas, thermoelectricty and solar technology 3 Volumes
Download or read book Thermal Methods of Petroleum Production written by N.K. Baibakov and published by Elsevier. This book was released on 2011-08-18 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until now, information on Russian enhanced oil recovery (EOR) research work and field experience has not been available in English. This work, originally published in Russian, describes in a systematic manner recent Russian laboratory and field research, as well as industrial experience of applying thermal EOR methods in different Russian oil fields - some with high viscosity crudes and others with low viscosity. It is written by two leading Russian specialists, and contains 116 diagrams (curves, graphs, designs), and 36 tables (research data).The book will be valuable to petroleum companies throughout the world, oil field servicing companies, petroleum engineering consultants, and libraries of technical institutes and universities.
Download or read book 24th European Symposium on Computer Aided Process Engineering written by and published by Elsevier. This book was released on 2014-06-20 with total page 1966 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 24th European Symposium on Computer Aided Process Engineering creates an international forum where scientific and industrial contributions of computer-aided techniques are presented with applications in process modeling and simulation, process synthesis and design, operation, and process optimization. The organizers have broadened the boundaries of Process Systems Engineering by inviting contributions at different scales of modeling and demonstrating vertical and horizontal integration. Contributions range from applications at the molecular level to the strategic level of the supply chain and sustainable development. They cover major classical themes, at the same time exploring a new range of applications that address the production of renewable forms of energy, environmental footprints and sustainable use of resources and water.
Download or read book Petroleum Abstracts Literature and Patents written by and published by . This book was released on 1990 with total page 1416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Journal of Canadian Petroleum Technology written by and published by . This book was released on 2008 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1990 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the World Tribology Congress III 2005 written by and published by . This book was released on 2005 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt:
