Download or read book Development of Highly Active and Stable Nickel Catalyst for Partial Oxidation of Methane for the Hydrogen Production written by and published by . This book was released on 200? with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New and Future Developments in Catalysis written by Steven L Suib and published by Newnes. This book was released on 2013-07-13 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: New and Future Developments in Catalysis is a package of seven books that compile the latest ideas concerning alternate and renewable energy sources and the role that catalysis plays in converting new renewable feedstock into biofuels and biochemicals. Both homogeneous and heterogeneous catalysts and catalytic processes will be discussed in a unified and comprehensive approach. There will be extensive cross-referencing within all volumes.The use of catalysts in the nanoscale offers various advantages (increased efficiency and less byproducts), and these are discussed in this volume along with the various catalytic processes using nanoparticles. However, this is not without any risks and the safety aspects and effects on humans and the environment are still unknown. The present data as well as future needs are all part of this volume along with the economics involved. Offers in-depth coverage of all catalytic topics of current interest and outlines future challenges and research areas A clear and visual description of all parameters and conditions, enabling the reader to draw conclusions for a particular case Outlines the catalytic processes applicable to energy generation and design of green processes
Download or read book Catalysts for Syngas Production written by Javier Ereña Loizaga and published by MDPI. This book was released on 2020-12-10 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue on “Catalysts for Syngas Production”, included in the Catalysts open access journal, shows new research about the development of catalysts and catalytic routes for syngas production, and the optimization of the reaction conditions for the process. This issue includes ten articles about the different innovative processes for syngas production. Synthesis gas (or syngas) is a mixture of hydrogen and carbon monoxide, with different chemical composition and H2/CO molar ratios, depending on the feedstock and production technology used. Syngas may be obtained from alternative sources to oil, such as natural gas, coal, biomass, organic wastes, etc. Syngas is a very good intermediate for the production of high value compounds at the industrial scale, such as hydrogen, methanol, liquid fuels, and a wide range of chemicals. Accordingly, efforts should be made on the co-feeding of CO2 with syngas, as an alternative for reducing greenhouse gas emissions. In addition, more syngas will be required in the near future, in order to satisfy the demand for synfuels and high value chemicals.
Download or read book Development of Highly Active Nanoscale Catalysts for Production of CO Free Hydrogen by Dehydrogenation of Methane written by Wenqin Shen and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrogen Energy written by Dragica Minic and published by BoD – Books on Demand. This book was released on 2012-10-17 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen economy represents the future of human civilization. Limited resources of our planet are compelling us to turn to renewable clean energy resources and hydrogen figures prominently as the energy carrier of a future sustainable energy system. There are significant challenges to be overcome in order to make hydrogen viable, in production, storage and power generation, while safety of operation is an ever-present factor that determines success or failure of a proposed solution. Recent developments in all of these aspects are reviewed in this book, along with some latest research in the field of hydrogen energy and use.
Download or read book Natural Gas Conversion V written by A. Parmaliana and published by Elsevier. This book was released on 1998-09-17 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: On January 1988, the ascertained and economically accessible reserves of Natural Gas (NG) amounted to over 144,000 billion cubic meters worldwide, corresponding to 124 billion tons of oil equivalents (comparable with the liquid oil reserves, which are estimated to be 138 billion TOE). It is hypothesized that the volume of NG reserve will continue to grow at the same rate of the last decade. Forecasts on production indicate a potential increase from about 2,000 billion cubic meters in 1990 to not more than 3,300 billion cubic meters in 2010, even in a high economic development scenario. NG consumption represents only one half of oil: 1.9 billion TOE/y as compared to 3.5 of oil. Consequently, in the future gas will exceed oil as a carbon atom source. In the future the potential for getting energetic vectors or petrochemicals from NG will continue to grow. The topics covered in Natural Gas Conversion V reflect the large global R&D effort to look for new and economic ways of NG exploitation. These range from the direct conversion of methane and light paraffins to the indirect conversion through synthesis gas to fuels and chemicals. Particularly underlined and visible are the technologies already commercially viable. These proceedings prove that mature and technologically feasible processes for natural gas conversion are already available and that new and improved catalytic approaches are currently developing, the validity and feasibility of which will soon be documented. This is an exciting area of modern catalysis, which will certainly open novel and rewarding perspectives for the chemical, energy and petrochemical industries.
Download or read book Hydrogen Assisted Direct Reduction of Iron Oxides written by Pasquale Cavaliere and published by Springer Nature. This book was released on 2022-04-21 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes the main approaches to produce and synthesize iron and steel through hydrogen-based technologies. Depending on the processing route and on the energy demand, the best available techniques and the most forward-looking solutions are explained. The book is edited with the contribution representing a range of industries in order to evaluate the industrial feasibility of each selected technology. It presents the most efficient solutions applied by ironmaking and steelmaking factories all around the world.
Download or read book Natural Gas Conversion VI written by T.H. Fleisch and published by Elsevier. This book was released on 2001-06-01 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains peer-reviewed manuscripts describing the scientific and technological advances presented at the 6th Natural Gas Conversion Sumposium held in Alaska in June 2001. This symposium continues the tradition of excellence and the status as the premier technical meeting in this area established by previous meetings. The 6th Natural Gas Conversion Symposium is conducted under the overall direction of the Organizing Committee. The Program Committee was responsible for the review, selection, editing of most of the manuscripts included in this volum. A standing International Advisory Board has ensured the effective long-term planning and the continuity and technical excellence of these meetings.
Download or read book Developing Methods to Inform Catalyst Design for the Electrochemical Oxidation of Methane and Alcohols written by Michael James Boyd and published by . This book was released on 2021 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the production of natural gas and agricultural biomass/energy crops increases, new efficient and sustainable technologies will be required to convert these feedstock molecules into the same fuels and chemical we get from conventional petroleum today. Electrochemistry is a possible tool for the conversion of these species that can be coupled to renewable electricity. The discovery and development of selective and active electrocatalysts is one of the primary challenges in utilizing natural gas and biomass resources. But first there is a lack of fundamental understanding in (1) the reaction mechanism and (2) how operating conditions such as potential, electrolyte pH, mass transport, and time affect the the activity and selectivity of catalysts. To this end platinum was used as a model system to study electrochemical methane oxidation at room temperature and pressure. The experimental results on platinum combined with density functional theory calculations show that methane is first thermally activated at Pt (211) like step sites, then the resulting methyl intermediate is electrochemically oxidized to CO* which is in equilibrium with the final product CO2. The equilibrium can be shifted to favor complete oxidation by adjusting the applied electrochemical potential, specifically at potentials below 0.5 V vs. RHE CO* is the most thermodynamically stable species along the reaction pathway whereas above 0.5 V vs. RHE CO2 is now the most stable species. Important to note however is that since the kinetics for methane activation are very slow (barrier of ~0.95 eV) the platinum surface must be free of other adsorbed species, namely protons or hydroxides. Based on reaction mechanism for electrochemical methane oxidation on platinum it is unlikely that partial oxidation of methane on metallic electrodes well occur. For this reason we probed the activity of several transition metal oxide materials with the hope that they may be active for methane oxidation. Unfortunately our initial results suggest no significant methane oxidation occurs on these materials. In the case of biomass oxidation 1st row transition metal oxides have recently been shown to be quite selective in the conversion of alcohols to their corresponding carboxylic acids. Benzyl alcohol was used as a model molecule to study the reaction mechanism for alcohol oxidation on Ni(OH)2 electrodes as a function of potential and electrolyte pH. It was found that the active phase for alcohol oxidation is the metal oxy-hydroxide. The activity and selectivity were found to be heavily dependent on the electrolyte pH. Under strong alkaline conditions (> pH 13) high current densities and complete oxidation of benzyl alcohol to benzoate was favored whereas at more moderately alkaline conditions low current densities and partial oxidation to benzaldehyde was favored. Based on these results we hypothesize that a significant concentration of OH- in solution is required to activated the intermediate product benzaldehyde. The activity of several novel Ni materials was also probed for benzyl alcohol oxidation. Ni-doped nitrided carbons which have single atom nickel active sites were found to be selective for partial oxidation, however further optimization of the catalyst synthesis is required to increase the activity to compete with the bulk Ni(OH)2 electrodes. In conclusion, this dissertation presents a variety of experimental work focused on identifying the reaction mechanism for several oxidation reactions and provides key understanding that can be used towards the development of new electrocatalysts for the oxidation of hydrocarbons and alcohols.
Download or read book Advances in Synthesis Gas Methods Technologies and Applications written by Mohammad Reza Rahimpour and published by Elsevier. This book was released on 2022-10-18 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Synthesis Gas: Methods, Technologies and Applications: Syngas Production and Preparation is a collection of various chapters concerning many aspects of syngas production technologies, including common methods like gasification, steam/dry/autothermal reforming, membrane technology, etc., along with novel methods like plasma technology, micro-reactors, electrolysis processes as well as photocatalytic systems. In addition, different sources for producing syngas, including oil, crude oil, heavy oil, microalgae, black liquor, tar and bitumen, as well as municipal, agricultural, food, plastic, wood and cardboard wastes are described in detail. Introduces syngas characteristics and its properties Describes various methods and technologies for producing syngas Discusses syngas production from different roots and feedstocks
Download or read book Development of Nickel based Catalysts for Hydrogen Production from Methane and Methanol written by Richard Augusto Couttenye and published by . This book was released on 2005 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Dimensions in Production and Utilization of Hydrogen written by Sonil Nanda and published by Elsevier. This book was released on 2020-08-11 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: The gradual increase of population and the consequential rise in the energy demands in the recent years have led to the overwhelming use of fossil fuels. Hydrogen has recently gained substantial interest because of its outstanding features to be used as clean energy carrier and energy vector. Moreover, hydrogen appears to be an effective alternative to tackle the issues of energy security and greenhouse gas emissions given that it is widely recognized as a clean fuel with high energy capacity. Hydrogen can be produced by various techniques such as thermochemical, hydrothermal, electrochemical, electrolytic, biological and photocatalytic methods as well as hybrid systems. New Dimensions in Production and Utilization of Hydrogen emphasizes on the research, development and innovations in the production and utilization of hydrogen in the industrial biorefining, hydrotreating and hydrogenation technologies, fuel cells, aerospace sector, pharmaceuticals, metallurgy, as well as bio-oil upgrading. Moreover, the supply chain analysis, lifecycle assessment, techno-economic analysis, as well as strengths and threats of global hydrogen market are covered in the book. This book provides many significant insights and scientific findings of key technologies for hydrogen production, storage and emerging applications. The book serves as a reference material for chemical and biochemical engineers, mechanical engineers, physicists, chemists, biologists, biomedical scientists and scholars working in the field of sustainable energy and materials. Discusses the efficient usage of hydrogen as standalone fuel or feedstock in downstream processing Outlines key technologies for hydrogen production and their emerging applications Includes innovative approaches to the research and applications of hydrogen, including hydrotreating technologies, fuel cell vehicles and green fuel synthesis, the aerospace sector, pharmaceuticals, carbon dioxide hydrogenation, and bio-oils upgrading Serves as a reference for chemical, biochemical, and mechanical engineers, physicists, chemists, biologists, and biomedical scientists working in sustainable energy and materials
Download or read book Fuel Cells Technologies for Fuel Processing written by Dushyant Shekhawat and published by Elsevier. This book was released on 2011-03-18 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells: Technologies for Fuel Processing provides an overview of the most important aspects of fuel reforming to the generally interested reader, researcher, technologist, teacher, student, or engineer. The topics covered include all aspects of fuel reforming: fundamental chemistry, different modes of reforming, catalysts, catalyst deactivation, fuel desulfurization, reaction engineering, novel reforming concepts, thermodynamics, heat and mass transfer issues, system design, and recent research and development. While no attempt is made to describe the fuel cell itself, there is sufficient description of the fuel cell to show how it affects the fuel reformer. By focusing on the fundamentals, this book aims to be a source of information now and in the future. By avoiding time-sensitive information/analysis (e.g., economics) it serves as a single source of information for scientists and engineers in fuel processing technology. The material is presented in such a way that this book will serve as a reference for graduate level courses, fuel cell developers, and fuel cell researchers. Chapters written by experts in each area Extensive bibliography supporting each chapter Detailed index Up-to-date diagrams and full colour illustrations
Download or read book Functional Properties of Advanced Engineering Materials and Biomolecules written by Felipe A. La Porta and published by Springer Nature. This book was released on 2021-05-17 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows how a small toolbox of experimental techniques, physical chemistry concepts as well as quantum/classical mechanics and statistical methods can be used to understand, explain and even predict extraordinary applications of these advanced engineering materials and biomolecules. It highlights how improving the material foresight by design, including the fundamental understanding of their physical and chemical properties, can provide new technological levels in the future.
Download or read book Study of the Effect of Water in Steam Reforming Reaction and Development of a Stable and Active Nickel Based Catalyst written by Md Mahfuzur Rahman and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fuel Processing written by Gunther Kolb and published by John Wiley & Sons. This book was released on 2008-11-21 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adopting a unique integrated engineering approach, this text covers all aspects of fuel processing: catalysts, reactors, chemical plant components and integrated system design. While providing an introduction to the subject, it also contains recent research developments, making this an invaluable handbook for chemical, power and process engineers, electrochemists, catalytic chemists, materials scientists and engineers in power technology.
Download or read book Horizons in Sustainable Industrial Chemistry and Catalysis written by Stefania Albonetti and published by Elsevier. This book was released on 2019-02-13 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Horizons in Sustainable Industrial Chemistry and Catalysis, Volume 178, presents a comprehensive picture of recent developments in terms of sustainable industrial processes and the catalytic needs and opportunities to develop these novel routes. Each chapter includes an introduction and state-of-the-art in the field, along with a series of specific aspects and examples. The book identifies new opportunities for research that will help us transition to low carbon and sustainable energy and chemical production. Users will find an integrated view of the new possibilities in this area that unleashes new possibilities in energy and chemistry. Combines an analysis of each scenario, the state-of-the art, and specific examples to help users better understand needs, opportunities, gaps and challenges Offers an integrated view of new catalytic technologies that are needed for future use Presents an interdisciplinary approach that combines broad expertise Brings together experts in the area of sustainable industrial chemistry
