Download or read book Development of Fabrication Technology for Copper Canisters with Cast Inserts written by Claes-Göran Andersson and published by . This book was released on 2002 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Status Report Canister Fabrication written by Claes-Göran Andersson and published by . This book was released on 2004 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Test Manufacturing of Copper Canisters with Cast Inserts written by Claes-Göran Andersson and published by . This book was released on 1998 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book RD D Programme 2004 written by Svensk kärnbränslehantering AB. and published by . This book was released on 2004 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sulphur Assisted Corrosion in Nuclear Disposal Systems written by Damien Féron and published by CRC Press. This book was released on 2020-11-26 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the different disposal concepts for high-level nuclear waste, corrosion of the metallic barriers and in particular the overpack/container is a major issue. It is imperative for performance assessment to predict the lifetime of these containers. In the lifetime prediction of metallic barriers for the disposal of high level nuclear waste (HLW) or of spent fuel, the presence of (reduced) sulphur species is an issue of growing importance, as the sulphur species are involved in localised corrosion phenomena. The international workshop on Sulphur-Assisted Corrosion in Nuclear Waste Disposal Systems (SACNUC2008) aimed to provide an exchange of information on the influence of sulphur species on the corrosion of metallic barriers. This workshop was a co-organisation of the Belgian Nuclear Research Centre, SCK*CEN, and the Belgian Agency for the Management of Radioactive Waste and Enriched Fissile Materials, ONDRAF/NIRAS, under the auspices of the European Federation of Corrosion (EFC event N 311). The proceedings are divided into five chapters: Chapter 1 provides a general overview of the disposal concepts of nuclear waste and the role of corrosion. Chapter 2 explains the mechanism of sulphur-induced corrosion processes. This chapter also contains information from outside the nuclear disposal field in which sulphur is known to act as a detrimental factor (e.g. oil and gas industry). Chapter 3 addresses the role of microbial processes in sulphur-assisted corrosion. Chapter 4 covers the modelling of sulphide-assisted corrosion. Chapter 5 is devoted to a panel discussion aiming to identify open issues in the investigation of sulphur-assisted corrosion phenomena and how to incorporate these in robust lifetime prediction of metallic barriers.
Download or read book Pressure Tests of Two KBS 3 Canister Mock ups written by and published by . This book was released on 2005 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SOU 2005 047 Nuclear Waste Barriers Biosphere and Society written by Statens råd för kärnavfallsfrågor and published by Norstedts Juridik AB. This book was released on 2005 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific Basis for Nuclear Waste Management XXVII written by Virginia M. Oversby and published by . This book was released on 2004 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Symposium written by Pierre van Iseghem and published by . This book was released on 2006 with total page 1122 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Innovations in Materials Manufacturing Fabrication and Environmental Safety written by Mel Schwartz and published by CRC Press. This book was released on 2010-11-24 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: When people make a call on a cellphone, drive a car, or turn on a computer, few truly appreciate the innovations in material selection, technology, and fabrication that were required to make it all possible. Innovations in Materials Manufacturing, Fabrication, and Environmental Safety explores expected developments in analysis, design, testing, and
Download or read book Friction Stir Welding and Processing written by Rajiv S. Mishra and published by ASM International. This book was released on 2007-01-01 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the rapidly growing area of friction stir welding. It also addresses the use of the technology for other types of materials processing, including superplastic forming, casting modification, and surface treatments. The book has been prepared to serve as the first general reference on friction stir technology,. Information is provided on tools, machines, process modeling, material flow, microstructural development and properties. Materials addressed include aluminum alloys, titanium alloys, steels, nickel-base alloys, and copper alloys. The chapters have been written by the leading experts in this field, representing leading industrial companies and university and government research insititutions.
Download or read book Earthquake Induced Rock Shear Through a Deposition Hole written by Lennart Börgesson and published by . This book was released on 2003 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book RD D programme 2001 written by Svensk kärnbränslehantering AB. and published by . This book was released on 2001 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Underground Infrastructures written by R K Goel and published by Butterworth-Heinemann. This book was released on 2012-06-19 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underground facilities, such as tunnels, sewer, water and gas networks form the backbone of the economic life of the modern city. In densely populated areas where the demands for transportation and services are rapidly increasing and the construction of new roads and railways are prohibited, the construction of a tunnel might be the only alternative. Brief and readable, this reference is based on a combined 75 years of field experience and places emphasis is on simple practical rules for designing and planning, underground infrastructures. The books' begins with a clear and rigorous exposition of the classification of underground space, important considerations such as geological and engineering and underground planning. This is followed by self-contained chapters concerning applications for underground water storage, underground car parks, underground metros & road tunnels and underground storage of crude oil, lpg and natural gas. The book has 15 chapters covering various usage of underground space. There are about 135 figures and tables. The book contains about 20 case histories/examples. One of the first book to address all of the major areas in which this technology is used, this book deals with major topics such as: hydroelectric projects with modern planning of complex underground structures; underground storages of food items, crude oil and explosives and highly cautious underground nuclear waste repositories. Rail and road tunnels and TBM are described briefly. Risk management in underground infrastructures is of vital importance. Civil Engineers, Mining Engineers, and Geotechnical Engineers will find this book a valuable guide to designing and planning underground infrastructures both in terms of its applications. - Risk management method for underground infrastructures - Vital tips for the underground storage of food, water, crude oil, natural gas and munitions - Provides design tips for Underground Parking Facilities - Instruction for the designing planning and construction for underground Metros and road tunnels - Planning and design of underground nuclear waste repositories - Clearly explains the benefits and drawbacks of underground facilities - Quick guide to the various modern mechanical underground parking options - Explanation of construction planning and Risk management - Places expert advice for planning and constructing projects at the finger tips
Download or read book Handbook of Advanced Radioactive Waste Conditioning Technologies written by Michael I. Ojovan and published by Elsevier. This book was released on 2011-01-24 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radioactive wastes are generated from a wide range of sources, including the power industry, and medical and scientific research institutions, presenting a range of challenges in dealing with a diverse set of radionuclides of varying concentrations. Conditioning technologies are essential for the encapsulation and immobilisation of these radioactive wastes, forming the initial engineered barrier required for their transportation, storage and disposal. The need to ensure the long term performance of radioactive waste forms is a key driver of the development of advanced conditioning technologies.The Handbook of advanced radioactive waste conditioning technologies provides a comprehensive and systematic reference on the various options available and under development for the treatment and immobilisation of radioactive wastes. The book opens with an introductory chapter on radioactive waste characterisation and selection of conditioning technologies. Part one reviews the main radioactive waste treatment processes and conditioning technologies, including volume reduction techniques such as compaction, incineration and plasma treatment, as well as encapsulation methods such as cementation, calcination and vitrification. This coverage is extended in part two, with in-depth reviews of the development of advanced materials for radioactive waste conditioning, including geopolymers, glass and ceramic matrices for nuclear waste immobilisation, and waste packages and containers for disposal. Finally, part three reviews the long-term performance assessment and knowledge management techniques applicable to both spent nuclear fuels and solid radioactive waste forms.With its distinguished international team of contributors, the Handbook of advanced radioactive waste conditioning technologies is a standard reference for all radioactive waste management professionals, radiochemists, academics and researchers involved in the development of the nuclear fuel cycle. - Provides a comprehensive and systematic reference on the various options available and under development for the treatment and immobilisation of radioactive wastes - Explores radioactive waste characterisation and selection of conditioning technologies including the development of advanced materials for radioactive waste conditioning - Assesses the main radioactive waste treatment processes and conditioning technologies, including volume reduction techniques such as compaction
Download or read book Integrated Account of Method Site Selection and Programme Prior to the Site Investigation Phase written by and published by . This book was released on 2000 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Textbook of Production Technology Manufacturing Processes written by P C Sharma and published by S. Chand Publishing. This book was released on 2007 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: The printing of the seventh edition of the book has provided the author with an opportunity to completely go through the text.Minor Additions and Improvements have been carried out,wherever needed.All the figure work has been redone on computer,with the result that all the figures are clear and sharp.The author is really thankful to M/s S.Chand & Company Ltd. for doing an excellent job in publishing the latest edition of the book.
