Download or read book Development of an NCHRP Report 350 TL 3 New Jersey Shape 50 inch Portable Concrete Barrier written by Chuck A. Plaxico and published by . This book was released on 2006 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: For roadside work-zones in areas that have opposing traffic flow, safety is enhanced if the temporary barriers incorporate a "glare-shield" that blocks headlight glare from opposing traffic. Currently-available 32-inch portable concrete barriers require the use of an add-on glare shield attached to the top of the barrier. The add-on glare shields are an extra expense and complicate barrier set-up and handling. An alternative solution was to develop a 50-inch high portable concrete barrier which is tall enough to serve as its own glare-shield. Finite element analysis was used to investigate various barrier shapes and connection schemes to identify a successful crashworthy design that would meet requirments of NCHRP Report 350 Test level 3. A 50-inch portable concrete barrier design was developed based on the results of the finite element analyses and was crash tested at the Transportation Research Center in East Liberty, Ohio. The system successfully met all safety criteria of NCHRP Report 350 and has been approved by the Federal Highway Administration for use on the National Highway System as a test level 3 device.
Download or read book NCHRP Report 537 written by and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Roadside Design Guide written by American Association of State Highway and Transportation Officials. Task Force for Roadside Safety and published by . This book was released on 1989 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recommended Guidelines for Curb and Curb barrier Installations written by Chuck A. Plaxico and published by Transportation Research Board. This book was released on 2005 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: At head of title: National Cooperative Highway Research Program.
Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.
Download or read book Transportation in an Aging Society written by and published by Transportation Research Board. This book was released on 2004 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Trenchless Installation of Conduits Beneath Roadways written by Tom Iseley and published by Transportation Research Board. This book was released on 1997 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis will be of interest to geologists; geotechnical, construction, and maintenance engineers; other state department of transportation (DOT) personnel involved with the planning, design, and permit issuance for conduits beneath roadways; local transportation agencies; utility contractors and consultants; and trenchless construction equipment manufacturers. It describes the current state of the practice for the use of trenchless technology for installing conduits beneath roadways. Trenchless construction is a process of installing, rehabilitating, or replacing underground utility systems without open-cut excavation. The synthesis is focused on trenchless technology for new installations. This report of the Transportation Research Board describes the trenchless installation technologies (methods, materials, and equipment) currently employed by state DOTs and other agencies to install conduits beneath roadways. The synthesis presents data obtained from a review of the literature and a survey of transportation agencies. For each technology identified, information is provided to describe the range of applications, basis for technique selection, site specific design factors to be considered, relative costs, common environmental issues, and example specifications. In addition, information on emerging technologies and research needs is presented.
Download or read book Separation of Vehicles written by Cambridge Systematics and published by Transportation Research Board. This book was released on 2010 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: NCHRP Report 649/NCFRP Report 3: Separation of Vehicles - CMV-Only Lanes presents an extensive compendium of information about CMV-only lanes and examines major issues and concepts that should be understood in developing new applications of CMV-only lane concepts as a potential method for both easing congestion and reducing the number of traffic accidents on highways. Appendices to this report, including an annotated literature review, performance evaluation criteria, benefits monetization factors and unit costs, and net present value calculations for benefit-cost analysis, are available on the TRB website. This report and the supplemental information can be used by public agencies that may be considering CMV-only lane concepts in corridor studies or other planning applications. The report provides data such agencies can use to support their own evaluations of CMV-only lane projects.
Download or read book Quick Response Freight Manual written by Travel Model Improvement Program (U.S.) and published by . This book was released on 1996 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pavement Design and Materials written by A. T. Papagiannakis and published by John Wiley & Sons. This book was released on 2017-02-22 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive, state-of-the-art guide to pavement design and materials With innovations ranging from the advent of SuperpaveTM, the data generated by the Long Term Pavement Performance (LTPP) project, to the recent release of the Mechanistic-Empirical pavement design guide developed under NCHRP Study 1-37A, the field of pavement engineering is experiencing significant development. Pavement Design and Materials is a practical reference for both students and practicing engineers that explores all the aspects of pavement engineering, including materials, analysis, design, evaluation, and economic analysis. Historically, numerous techniques have been applied by a multitude of jurisdictions dealing with roadway pavements. This book focuses on the best-established, currently applicable techniques available. Pavement Design and Materials offers complete coverage of: The characterization of traffic input The characterization of pavement bases/subgrades and aggregates Asphalt binder and asphalt concrete characterization Portland cement and concrete characterization Analysis of flexible and rigid pavements Pavement evaluation Environmental effects on pavements The design of flexible and rigid pavements Pavement rehabilitation Economic analysis of alternative pavement designs The coverage is accompanied by suggestions for software for implementing various analytical techniques described in these chapters. These tools are easily accessible through the book’s companion Web site, which is constantly updated to ensure that the reader finds the most up-to-date software available.
Download or read book Civil Engineering Applications of Ground Penetrating Radar written by Andrea Benedetto and published by Springer. This book was released on 2015-04-07 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, based on Transport and Urban Development COST Action TU1208, presents the most advanced applications of ground penetrating radar (GPR) in a civil engineering context, with documentation of instrumentation, methods and results. It explains clearly how GPR can be employed for the surveying of critical transport infrastructure, such as roads, pavements, bridges and tunnels and for the sensing and mapping of underground utilities and voids. Detailed attention is also devoted to use of GPR in the inspection of geological structures and of construction materials and structures, including reinforced concrete, steel reinforcing bars and pre/post-tensioned stressing ducts. Advanced methods for solution of electromagnetic scattering problems and new data processing techniques are also presented. Readers will come to appreciate that GPR is a safe, advanced, non destructive and noninvasive imaging technique that can be effectively used for the inspection of composite structures and the performance of diagnostics relevant to the entire life cycle of civil engineering works.
Download or read book Soil Improvement and Ground Modification Methods written by Peter G. Nicholson and published by Butterworth-Heinemann. This book was released on 2014-08-29 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an author with more than 25 years of field and academic experience, Soil Improvement and Ground Modification Methods explains ground improvement technologies for converting marginal soil into soil that will support all types of structures. Soil improvement is the alteration of any property of a soil to improve its engineering performance. Some sort of soil improvement must happen on every construction site. This combined with rapid urbanization and the industrial growth presents a huge dilemma to providing a solid structure at a competitive price. The perfect guide for new or practicing engineers, this reference covers projects involving soil stabilization and soil admixtures, including utilization of industrial waste and by-products, commercially available soil admixtures, conventional soil improvement techniques, and state-of-the-art testing methods. - Conventional soil improvement techniques and state-of-the-art testing methods - Methods for mitigating or removing the risk of liquefaction in the event of major vibrations - Structural elements for stabilization of new or existing construction industrial waste/by-products, commercially available soil - Innovative techniques for drainage, filtration, dewatering, stabilization of waste, and contaminant control and removal
Download or read book Jet Cutting Technology written by A. Lichtarowicz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers presented at the 11th International Conference on Jet Cutting Technology, held at St. Andrews, Scotland, on 8-10 September 1992. Jetting techniques have been successfully applied for many years in the field of cleaning and descaling. Today, however, jet cutting is used in operations as diverse as removing cancerous growths from the human body, decommissioning sunsea installations and disabling explosive munitions. The diversity is reflected in the papers presented at the conference. The papers were divided into several main sections: jetting basics -- materials; jetting basics -- fluid mechanics; mining and quarrying; civil engineering; new developments; petrochem; cleaning and surface treatment; and manufacturing. The high quality of papers presented at the conference has further reinforced its position as the premier event in the field. The volume will be of interest to researchers, developers and manufacturers of systems, equipment users and contractors.
Download or read book Bridge Scour and Stream Instability Countermeasures written by U. S. Department of Transportation and published by . This book was released on 2015-10-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this document is to identify and provide design guidelines for bridge scour and stream instability countermeasures that have been implemented by various State departments of transportation (DOTs) in the United States. Countermeasure experience, selection, and design guidance are consolidated from other FHWA publications in this document to support a comprehensive analysis of scour and stream instability problems and provide a range of solutions to those problems. The results of recently completed National Cooperative Highway Research Program (NCHRP) projects are incorporated in the design guidance, including: countermeasures to protect bridge piers and abutments from scour; riprap design criteria, specifications, and quality control, and environmentally sensitive channel and bank protection measures. Selected innovative countermeasure concepts and guidance derived from practice outside the United States are introduced. In addition, guidance for the preparation of Plans of Action ...
Download or read book Cathodic Protection for Reinforced Concrete Bridge Decks written by John B. Vrable and published by Transportation Research Board National Research. This book was released on 1977 with total page 1304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Asphalt Pavements written by Patrick Lavin and published by CRC Press. This book was released on 2003-09-02 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asphalt Pavements provides the know-how behind the design, production and maintenance of asphalt pavements and parking lots. Incorporating the latest technology, this book is the first to focus primarily on the design, production and maintenance of low-volume roads and parking areas.Special attention is given to determining the traffic capacity, re
Download or read book Ground Control and Improvement written by Petros P. Xanthakos and published by John Wiley & Sons. This book was released on 1994-06-14 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive compilation concerned with a variety of modern methods being used worldwide to improve soil and rock conditions supporting new and remedial construction. Ground water lowering and drainage techniques, soil compaction, excavation support methods, permeation and jet grouting are among the many topics discussed. More than 100 tables and 650 figures illustrate the text.
