Download or read book An Evaluation of Krypton Propellant in Hall Thrusters written by Jesse Allen Linnell and published by . This book was released on 2006 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Electric Propulsion written by Dan M. Goebel and published by John Wiley & Sons. This book was released on 2008-12-22 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout most of the twentieth century, electric propulsion was considered the technology of the future. Now, the future has arrived. This important new book explains the fundamentals of electric propulsion for spacecraft and describes in detail the physics and characteristics of the two major electric thrusters in use today, ion and Hall thrusters. The authors provide an introduction to plasma physics in order to allow readers to understand the models and derivations used in determining electric thruster performance. They then go on to present detailed explanations of: Thruster principles Ion thruster plasma generators and accelerator grids Hollow cathodes Hall thrusters Ion and Hall thruster plumes Flight ion and Hall thrusters Based largely on research and development performed at the Jet Propulsion Laboratory (JPL) and complemented with scores of tables, figures, homework problems, and references, Fundamentals of Electric Propulsion: Ion and Hall Thrusters is an indispensable textbook for advanced undergraduate and graduate students who are preparing to enter the aerospace industry. It also serves as an equally valuable resource for professional engineers already at work in the field.

Download or read book Space Nuclear Propulsion for Human Mars Exploration written by National Academies of Sciences Engineering and Medicine and published by . This book was released on 2021-11-12 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Space Nuclear Propulsion for Human Mars Exploration identifies primary technical and programmatic challenges, merits, and risks for developing and demonstrating space nuclear propulsion technologies of interest to future exploration missions. This report presents key milestones and a top-level development and demonstration roadmap for performance nuclear thermal propulsion and nuclear electric propulsion systems and identifies missions that could be enabled by successful development of each technology.

Download or read book Selected Topics in Plasma Physics written by Sukhmander Singh and published by BoD – Books on Demand. This book was released on 2020-11-19 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is planned to introduce the advances topics of plasma physics for research scholars and postgraduate students. This book deals with basic concepts in plasma physics, non-equilibrium plasma modeling, space plasma applications, and plasma diagnostics. It also provides an overview of the linear and nonlinear aspects of plasma physics. Chapters cover such topics as plasma application in space propulsion, microwave–plasma interaction, plasma antennas, solitary waves, and plasma diagnostic techniques.

Download or read book Reusable Booster System written by National Research Council and published by National Academies Press. This book was released on 2013-01-10 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: On June 15, 2011, the Air Force Space Command established a new vision, mission, and set of goals to ensure continued U.S. dominance in space and cyberspace mission areas. Subsequently, and in coordination with the Air Force Research Laboratory, the Space and Missile Systems Center, and the 14th and 24th Air Forces, the Air Force Space Command identified four long-term science and technology (S&T) challenges critical to meeting these goals. One of these challenges is to provide full-spectrum launch capability at dramatically lower cost, and a reusable booster system (RBS) has been proposed as an approach to meet this challenge. The Air Force Space Command asked the Aeronautics and Space Engineering Board of the National Research Council to conduct an independent review and assessment of the RBS concept prior to considering a continuation of RBS-related activities within the Air Force Research Laboratory portfolio and before initiating a more extensive RBS development program. The committee for the Reusable Booster System: Review and Assessment was formed in response to that request and charged with reviewing and assessing the criteria and assumptions used in the current RBS plans, the cost model methodologies used to fame [frame?] the RBS business case, and the technical maturity and development plans of key elements critical to RBS implementation. The committee consisted of experts not connected with current RBS activities who have significant expertise in launch vehicle design and operation, research and technology development and implementation, space system operations, and cost analysis. The committee solicited and received input on the Air Force launch requirements, the baseline RBS concept, cost models and assessment, and technology readiness. The committee also received input from industry associated with RBS concept, industry independent of the RBS concept, and propulsion system providers which is summarized in Reusable Booster System: Review and Assessment.

Download or read book Inertial Electrostatic Confinement IEC Fusion written by George H. Miley and published by Springer Science & Business Media. This book was released on 2013-12-12 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with an introductory understanding of Inertial Electrostatic Confinement (IEC), a type of fusion meant to retain plasma using an electrostatic field. IEC provides a unique approach for plasma confinement, as it offers a number of spin-off applications, such as a small neutron source for Neutron Activity Analysis (NAA), that all work towards creating fusion power. The IEC has been identified in recent times as an ideal fusion power unit because of its ability to burn aneutronic fuels like p-B11 as a result of its non-Maxwellian plasma dominated by beam-like ions. This type of fusion also takes place in a simple mechanical structure small in size, which also contributes to its viability as a source of power. This book posits that the ability to study the physics of IEC in very small volume plasmas makes it possible to rapidly investigate a design to create a power-producing device on a much larger scale. Along with this hypothesis the book also includes a conceptual experiment proposed for demonstrating breakeven conditions for using p-B11 in a hydrogen plasma simulation. This book also: Offers an in-depth look, from introductory basics to experimental simulation, of Inertial Electrostatic Confinement, an emerging method for generating fusion power Discusses how the Inertial Electrostatic Confinement method can be applied to other applications besides fusion through theoretical experiments in the text Details the study of the physics of Inertial Electrostatic Confinement in small-volume plasmas and suggests that their rapid reproduction could lead to the creation of a large-scale power-producing device Perfect for researchers and students working with nuclear fusion, Inertial Electrostatic Confinement (IEC) Fusion: Fundamentals and Applications also offers the current experimental status of IEC research, details supporting theories in the field and introduces other potential applications that stem from IEC.

Download or read book Low Temperature Plasma Technology written by Paul K. Chu and published by CRC Press. This book was released on 2013-07-15 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a team of pioneering scientists from around the world, Low Temperature Plasma Technology: Methods and Applications brings together recent technological advances and research in the rapidly growing field of low temperature plasmas. The book provides a comprehensive overview of related phenomena such as plasma bullets, plasma penetration into biofilms, discharge-mode transition of atmospheric pressure plasmas, and self-organization of microdischarges. It describes relevant technology and diagnostics, including nanosecond pulsed discharge, cavity ringdown spectroscopy, and laser-induced fluorescence measurement, and explores the increasing research on atmospheric pressure nonequilibrium plasma jets. The authors also discuss how low temperature plasmas are used in the synthesis of nanomaterials, environmental applications, the treatment of biomaterials, and plasma medicine. This book provides a balanced and thorough treatment of the core principles, novel technology and diagnostics, and state-of-the-art applications of low temperature plasmas. It is accessible to scientists and graduate students in low-pressure plasma physics, nanotechnology, plasma medicine, and materials science. The book is also suitable as an advanced reference for senior undergraduate students.

Download or read book Physics of Radio Frequency Plasmas written by Pascal Chabert and published by Cambridge University Press. This book was released on 2011-02-24 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-temperature radio frequency plasmas are essential in various sectors of advanced technology, from micro-engineering to spacecraft propulsion systems and efficient sources of light. The subject lies at the complex interfaces between physics, chemistry and engineering. Focusing mostly on physics, this book will interest graduate students and researchers in applied physics and electrical engineering. The book incorporates a cutting-edge perspective on RF plasmas. It also covers basic plasma physics including transport in bounded plasmas and electrical diagnostics. Its pedagogic style engages readers, helping them to develop physical arguments and mathematical analyses. Worked examples apply the theories covered to realistic scenarios, and over 100 in-text questions let readers put their newly acquired knowledge to use and gain confidence in applying physics to real laboratory situations.

Download or read book INTRODUCTION TO PLASMA PHYSICS AND ITS SPACE APPLICATIONS SECOND EDITION written by LUIS. CONDE and published by . This book was released on 2025 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Performance Evaluation of the SPT 140 written by and published by . This book was released on 1997 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Micropropulsion for Small Spacecraft written by Michael Matthew Micci and published by AIAA. This book was released on 2000 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The International Handbook of Space Technology written by Malcolm Macdonald and published by Springer. This book was released on 2014-07-08 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook provides an overview of space technology and a holistic understanding of the system-of-systems that is a modern spacecraft. With a foreword by Elon Musk, CEO and CTO of SpaceX, and contributions from globally leading agency experts from NASA, ESA, JAXA, and CNES, as well as European and North American academics and industrialists, this handbook, as well as giving an interdisciplinary overview, offers, through individual self-contained chapters, more detailed understanding of specific fields, ranging through: · Launch systems, structures, power, thermal, communications, propulsion, and software, to · entry, descent and landing, ground segment, robotics, and data systems, to · technology management, legal and regulatory issues, and project management. This handbook is an equally invaluable asset to those on a career path towards the space industry as it is to those already within the industry.

Download or read book Mechanical Design Engineering Handbook written by Peter Childs and published by Butterworth-Heinemann. This book was released on 2013-09-02 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Design Engineering Handbook is a straight-talking and forward-thinking reference covering the design, specification, selection, use and integration of machine elements fundamental to a wide range of engineering applications. Develop or refresh your mechanical design skills in the areas of bearings, shafts, gears, seals, belts and chains, clutches and brakes, springs, fasteners, pneumatics and hydraulics, amongst other core mechanical elements, and dip in for principles, data and calculations as needed to inform and evaluate your on-the-job decisions. Covering the full spectrum of common mechanical and machine components that act as building blocks in the design of mechanical devices, Mechanical Design Engineering Handbook also includes worked design scenarios and essential background on design methodology to help you get started with a problem and repeat selection processes with successful results time and time again. This practical handbook will make an ideal shelf reference for those working in mechanical design across a variety of industries and a valuable learning resource for advanced students undertaking engineering design modules and projects as part of broader mechanical, aerospace, automotive and manufacturing programs. - Clear, concise text explains key component technology, with step-by-step procedures, fully worked design scenarios, component images and cross-sectional line drawings all incorporated for ease of understanding - Provides essential data, equations and interactive ancillaries, including calculation spreadsheets, to inform decision making, design evaluation and incorporation of components into overall designs - Design procedures and methods covered include references to national and international standards where appropriate

Download or read book Mechanical Design written by P.R.N. Childs and published by Elsevier. This book was released on 2003-12-04 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the subject of total design, and introduces the design and selection of various common mechanical engineering components and machine elements. These provide "building blocks", with which the engineer can practice his or her art. The approach adopted for defining design follows that developed by the SEED (Sharing Experience in Engineering Design) programme where design is viewed as "the total activity necessary to provide a product or process to meet a market need." Within this framework the book concentrates on developing detailed mechanical design skills in the areas of bearings, shafts, gears, seals, belt and chain drives, clutches and brakes, springs and fasteners. Where standard components are available from manufacturers, the steps necessary for their specification and selection are developed. The framework used within the text has been to provide descriptive and illustrative information to introduce principles and individual components and to expose the reader to the detailed methods and calculations necessary to specify and design or select a component. To provide the reader with sufficient information to develop the necessary skills to repeat calculations and selection processes, detailed examples and worked solutions are supplied throughout the text. This book is principally a Year/Level 1 and 2 undergraduate text. Pre-requisite skills include some year one undergraduate mathematics, fluid mechanics and heat transfer, principles of materials, statics and dynamics. However, as the subjects are introduced in a descriptive and illustrative format and as full worked solutions are provided, it is possible for readers without this formal level of education to benefit from this book. The text is specifically aimed at automotive and mechanical engineering degree programmes and would be of value for modules in design, mechanical engineering design, design and manufacture, design studies, automotive power-train and transmission and tribology, as well as modules and project work incorporating a design element requiring knowledge about any of the content described. The aims and objectives described are achieved by a short introductory chapters on total design, mechanical engineering and machine elements followed by ten chapters on machine elements covering: bearings, shafts, gears, seals, chain and belt drives, clutches and brakes, springs, fasteners and miscellaneous mechanisms. Chapters 14 and 15 introduce casings and enclosures and sensors and actuators, key features of most forms of mechanical technology. The subject of tolerancing from a component to a process level is introduced in Chapter 16. The last chapter serves to present an integrated design using the detailed design aspects covered within the book. The design methods where appropriate are developed to national and international standards (e.g. ANSI, ASME, AGMA, BSI, DIN, ISO). The first edition of this text introduced a variety of machine elements as building blocks with which design of mechanical devices can be undertaken. The approach adopted of introducing and explaining the aspects of technology by means of text, photographs, diagrams and step-by-step procedures has been maintained. A number of important machine elements have been included in the new edition, fasteners, springs, sensors and actuators. They are included here. Chapters on total design, the scope of mechanical engineering and machine elements have been completely revised and updated. New chapters are included on casings and enclosures and miscellaneous mechanisms and the final chapter has been rewritten to provide an integrated approach. Multiple worked examples and completed solutions are included.

Download or read book Plasma Engineering written by Michael Keidar and published by Academic Press. This book was released on 2018-08-06 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Engineering, Second Edition, applies the unique properties of plasmas (ionized gases) to improve processes and performance over many fields, such as materials processing, spacecraft propulsion and nanofabrication. The book considers this rapidly expanding discipline from a unified standpoint, addressing fundamentals of physics and modeling, as well as new and real-word applications in aerospace, nanotechnology and bioengineering. This updated edition covers the fundamentals of plasma physics at a level suitable for students using application examples and contains the widest variety of applications of any text on the market, spanning the areas of aerospace engineering, nanotechnology and nanobioengineering. This is highly useful for courses on plasma engineering or plasma physics in departments of Aerospace Engineering, Electrical Engineering and Physics. It is also useful as an introduction to plasma engineering and its applications for early career researchers and practicing engineers. - Features new material relevant to application, including emerging areas of plasma nanotechnology and medicine - Contains a new chapter on plasma-based control, as well as a description of RF and microwave-based plasma applications, plasma lighting, reforming and other most recent application areas - Provides a technical treatment of the fundamental and engineering principles used in plasma applications

Download or read book Rocket and Spacecraft Propulsion written by Martin J. L. Turner and published by Springer Science & Business Media. This book was released on 2006-08-29 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised edition of this practical, hands-on book discusses the launch vehicles in use today throughout the world, and includes the latest details on advanced systems being developed, such as electric and nuclear propulsion. The author covers the fundamentals, from the basic principles of rocket propulsion and vehicle dynamics through the theory and practice of liquid and solid propellant motors, to new and future developments. He provides a serious exposition of the principles and practice of rocket propulsion, from the point of view of the user who is not an engineering specialist.

Download or read book Physics of Electric Propulsion written by Robert G. Jahn and published by Courier Corporation. This book was released on 2006-05-26 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Literaturangaben. - Originally published: New York, NY : McGraw-Hill, 1968