Download or read book Development of a Temporary Barrier System for Off road Applications written by Kenneth H. Addink and published by . This book was released on 1998 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safety shape portable concrete barrier (PCB) has been approved for use when placed on a bituminous or concrete pad. Construction personnel would like to use PCBs in temporary situations along roadways where the use of a bituminous or concrete pad is impractical and costly. However, when PCBs are placed on soil foundations with no anchorage, they tend to dig into the soil, causing the barrier sections to rotate or overturn. The objective of this research was to develop a device which will allow temporary PCBs placed on soil foundations to translate without significant rotation when impacted by errant vehicles. This device was developed and successfully tested to Test Level 3 of the National Cooperative Highway Research Program (NCHRP) Report No. 350.

Download or read book Evaluation of Roadside Features to Accommodate Vans Minivans Pickup Trucks and 4 wheel Drive Vehicles written by Hayes E. Ross and published by Transportation Research Board. This book was released on 2002 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Roadside Design Guide written by American Association of State Highway and Transportation Officials. Task Force for Roadside Safety and published by . This book was released on 1989 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Development of a Tie down System for Temporary Concrete Barriers written by and published by . This book was released on 2002 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report details the development and testing of an NCHRP Report 350 compliant tie-down system for use with F-shape temporary concrete barriers. Development of the tie-down system began with the creation and evaluation of several design concepts. Following the researchers' evaluation of the design prototypes, the steel strap tie-down concept was selected for further study.

Download or read book Development of a Steel H section Temporary Barrier for Use in Limited Deflection Applications written by Karla A. Polivka and published by . This book was released on 2003 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: A tie-down system was developed for use with Iowa's steel H-section temporary barrier. For this system, the original barrier connection detail was modified in order to simplify barrier attachment to one another as well as to more easily accommodate deviations in horizontal and vertical alignment. At each barrier joint, two steel shear plates were positioned within an opening on the adjacent barrier section and held in place with two steel drop pins. Four steel angle brackets were welded to the barrier's base at every joint in order to allow for the barriers to be rigidly attached to the concrete bridge deck using drop-in anchors. Two full-scale vehicle crash tests, using 3/4-ton pickup trucks, were performed on the steel H-section barrier system.

Download or read book Development of a TL 3 F shape Temporary Concrete Median Barrier written by Ronald K. Faller and published by . This book was released on 1996 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Work zones often require the use of temporary concrete barriers (TCBs) within a limited area to provide protection for construction workers. In situations where an existing guardrail is immediately adjacent to the construction hazards that need to be shielded, highway designers must either connect the guardrail to the temporary barrier or replace it with TCB. Although interconnecting the two barrier systems represents the more convenient option, at present no suitable solutions have been made available. A transition from guardrail to temporary barriers may not need to be nearly as stiff as a conventional approach transitions. However, it must provide sufficient stiffness and strength to prevent pocketing as well as to shield the end of the concrete barrier to prevent serious wheel snag. In addition, considerations must be made for transitioning from the TCB to the guardrail, anchoring the TCB system, and the potential use of tie-downs to limit TCB deflection. TCBs are connected and transitioned to many types of barriers. Unfortunately, little effort has been devoted to this issue. The only transitions previously developed have been between TCBs and safety shaped concrete barriers and TCBs and permanent concrete median barriers. Transitions between TCBs and other common barrier types, such as guardrail, have typically not been full-scale crash tested and may pose a serious hazard to motorists during an impact. Transitions between two barrier types generally are designed with the assumption that it is more critical to transition from a less stiff barrier to a stiffer barrier due to concerns for pocketing and snag on the stiffer barrier system. However, in the case of a TCB system, design of the transition can be more complex. Design of a transition between TCB and guardrail must consider several factors: (1) Connection of the guardrail on the upstream or downstream end of the TCB system - The location of the guardrail on either the upstream or downstream end of the transition will largely affect the transition along with other factors. For example, the attachment of the guardrail to the downstream end of an unanchored, free-standing TCB system would require a transition. This could be as simple as using tie-down anchorages on the TCB segments to increase their stiffness prior to the guardrail attachment. Conversely, attachment of the guardrail to the upstream end of a free-standing, TCB system would require a transition as well. However, this type of transition would require stiffening the guardrail as it approached the TCB. (2) Anchorage of the end of the TCB system - The location and design of the end anchorage for the TCB system will largely determine the stiffness of the TCB end as compared to the guardrail as well as the transition configuration. (3) Free-standing barrier vs. tie-down anchorage - The stiffness of the TCB section varies depending on whether the barrier segments use any form of tie-down anchorage. The design of the transition between the rail and the TCB would change depending on whether the barrier segments were free-standing or anchored. (4) Direction of traffic - The transition design may depend on the potential for two-way traffic or reverse impacts. Due to the wide range of factors affecting the design of a TCB to guardrail transition, it is necessary to develop a better understanding of the most common and most critical transition installations. Then, a transition design could be developed to meet those needs. It is anticipated that this transition design would be developed around the F-shape, TCB segment and the recently developed Midwest Guardrail System (MGS). The research study recommended herein would primarily be directed toward improving the safety and minimizing risk for the motoring public traveling within our nation's work-zones and on our highways and roadways. More specifically, this project would address the goal of the Smart Work Zone Deployment Initiative, which is "to develop improved methods and products for addressing safety and mobility in work zones by evaluating new technologies and methods, thereby enhancing safety and efficiency of traffic operations and highway workers. The project is a public/private partnership between the sponsoring public transportation agencies in several Midwestern States, the Federal Highway Administration (FHWA), private technology providers and university transportation researchers." The overall objective of this research effort is to develop a MASH TL-3 transition design between TCBs and the MGS. The design of the transition would focus on a representative selection of state departments of transportation (DOTs) highest priority configuration. Due to the large number of unknowns, this phase of the project will focus on the development of design concepts for the highest priority transition need. Full-scale crash testing of the proposed transition design is not a part of this project and may be performed in a future phase of the project. This research effort will begin with identifying and quantifying the most pressing TCB to guardrail transition needs. Although a need to develop configurations for most, if not all, of the TCB to guardrail transition needs may exist, this project will address the highest priority need. Thus, the state DOTs of the Midwest States Pooled Fund Program will be surveyed to identify the highest priority TCB to guardrail transition need. After the critical transition need is identified, potential transition concepts and prototype designs will be brainstormed. Computer simulations with LS-DYNA, a non-linear explicit finite element code, will be used to investigate and evaluate the concepts and prototype designs. CAD details for the proposed transition design will be prepared. A summary report detailing the research effort will be compiled and will include recommendations for future full-scale crash testing of the TCB to guardrail transition as well as recommendations for further development of TCB to guardrail transitions. The research study is directed toward improving the safety by minimizing the risk for the motoring public traveling within our nation's work-zones and on our highways and roadways. Since W-beam guardrail has proven to provide better safety performance than temporary concrete barriers, the development of an effective transition between the two can help preserve guardrails outside the immediate work-zone area, thus providing an overall higher level of safety for motorists. The new transition would also eliminate the use of an unproven connection between guardrail and temporary barriers. Further, limiting the use of temporary concrete barriers strictly to the work zone area will also minimize the traffic disruption that these barriers can create to motorists passing in work zones. Following the development efforts, a research report will be prepared that summarizes the results of the study. If warranted, a formal paper will be prepared and submitted for publication in a refereed journal, such as a Transportation Research Record, so that dissemination and distribution of the final research results will provide the most significant impact in terms of safety benefit for the motoring public

Download or read book Development of a Plan for Compliance with NCHRP 350 for Temporary Concrete Barriers written by Muhannad Zubi and published by . This book was released on 2002 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Federal Highway Administration has mandated that temporary concrete barriers (TCBs) used on federally funded projects on the National Highway System advertised after October 1, 2002 shall meet the requirements of National Cooperative Highway Research Program (NCHRP) Report 350. The State's present TCB system design is not approved as meeting the NCHRP 350 requirements, and even with modifications it is not likely to meet those standards. The Arizona Department of Transportation (ADOT) and Arizona industry partners are to evaluate many key factors in the ADOT's effort to develop an NCHRP 350 compliance plan for TCBs. Arizona intends to adopt the most valid non-proprietary TCB design, out of already approved designs, for future use in Arizona.

Download or read book Development of Tie down and Transition Systems for Temporary Concrete Barrier on Asphalt Road Surfaces written by and published by . This book was released on 2007 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book What s Up Doc written by and published by . This book was released on 1997 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Development of a Temporary Concrete Barrier to Permanent Concrete Median Barrier Approach Transition written by and published by . This book was released on 2010 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gravel Roads written by Ken Skorseth and published by . This book was released on 2000 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this manual is to provide clear and helpful information for maintaining gravel roads. Very little technical help is available to small agencies that are responsible for managing these roads. Gravel road maintenance has traditionally been "more of an art than a science" and very few formal standards exist. This manual contains guidelines to help answer the questions that arise concerning gravel road maintenance such as: What is enough surface crown? What is too much? What causes corrugation? The information is as nontechnical as possible without sacrificing clear guidelines and instructions on how to do the job right.

Download or read book Development and Evaluation of a Tie down System for the Redesigned F shape Concrete Temporary Barrier written by and published by . This book was released on 2003 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: A rigid tie-down system was developed that minimizes barrier deflections. For this system, the original Kansas temporary barrier was redesigned in order to strengthen the barrier around the tie-down holes and to standardize the barriers for use in adjacent states and in various temporary and tied-down configurations. The tie-down anchor system fastened the traffic-side of the barriers to the concrete bridge deck with three 29-mm (1.125-in.) diameter ASTM A307 anchor bolts with heavy hex nuts and 76-mm (3-in.) x 76-mm (3-in.) x 13-mm (0.5 in.) thick washers. The research study included one full-scale vehicle crash test, using a 3/4-ton pickup truck.

Download or read book Development of Aluminum Barrier Systems written by W. B. McMullin and published by . This book was released on 1967 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Federal Register written by and published by . This book was released on 2012-10 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book H T written by and published by . This book was released on 2000 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Development of the Transfer Tank Longitudinal Sealer written by Duane A. Bennett and published by . This book was released on 2006 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Assessing and Managing the Ecological Impacts of Paved Roads written by National Research Council and published by National Academies Press. This book was released on 2006-01-22 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: All phases of road developmentâ€"from construction and use by vehicles to maintenanceâ€"affect physical and chemical soil conditions, water flow, and air and water quality, as well as plants and animals. Roads and traffic can alter wildlife habitat, cause vehicle-related mortality, impede animal migration, and disperse nonnative pest species of plants and animals. Integrating environmental considerations into all phases of transportation is an important, evolving process. The increasing awareness of environmental issues has made road development more complex and controversial. Over the past two decades, the Federal Highway Administration and state transportation agencies have increasingly recognized the importance of the effects of transportation on the natural environment. This report provides guidance on ways to reconcile the different goals of road development and environmental conservation. It identifies the ecological effects of roads that can be evaluated in the planning, design, construction, and maintenance of roads and offers several recommendations to help better understand and manage ecological impacts of paved roads.