Download or read book Phase field Modeling of Multi domain Evolution in Ferromagnetic Shape Memory Alloys and of Polycrystalline Thin Film Growth written by Christian Mennerich and published by KIT Scientific Publishing. This book was released on 2014-05-13 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The phase-field method is a powerful tool in computer-aided materials science as it allows for the analysis of the time-spatial evolution of microstructures on the mesoscale. A multi-phase-field model is adopted to run numerical simulations in two different areas of scientific interest: Polycrystalline thin films growth and the ferromagnetic shape memory effect. FFT-techniques, norm conservative integration and RVE-methods are necessary to make the coupled problems numerically feasible.

Download or read book Magnetic Shape Memory Alloys written by Xuexi Zhang and published by Springer Nature. This book was released on 2021-11-14 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically describes the fundamentals of Magnetic shape memory alloys (MSMAs), with an emphasis on low-dimensional structures such as foams, microwires and micro-particles. The respective chapters address basic concepts and theories, the fabrication of various architectures, microstructure tailoring, property optimization and cutting-edge applications. Taken together, they provide a clear understanding of the correlation between processing and the microstructural properties of MSMAs, which are illustrated in over two hundred figures and schematics. Given its scope and format, the book offers a valuable resource for a broad readership in various fields of materials science and engineering, especially for researchers, students and engineers.

Download or read book Additive Manufacturing of Shape Memory Materials written by Mehrshad Mehrpouya and published by Elsevier. This book was released on 2024-10-23 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of Shape Memory Materials: Techniques, Characterization, Modeling, and Applications outlines an array of techniques and applications for additive manufacturing (AM) and the use of various shape memory materials, covering corrosion properties, material sensitivity to thermal, magnetic, and electrical effects, as well as sensitivity of shape memory properties to AM parameters, including part geometry effects and post-process treatments.Design for AM and a number of different AM methods are discussed, with materials covered including shape memory alloys, shape memory polymers, high-temperature shape memory alloys, and magnetic shape memory alloys. Characterization and modeling methods are also included, as is a chapter dedicated to real-world applications of these production techniques and materials. - Provides an overview of various shape memory materials, their additive manufacturing techniques and processes, their applications, and opportunities and challenges related to their production and use - Outlines the thermomechanical and functional properties of shape memory alloys that can be applied to their additive manufacturing processes - Covers techniques for additive manufacturing of shape memory polymers, shape memory alloys, high-temperature shape memory alloys, and magnetic shape memory alloys - Discusses characterization, post-processing, modeling, and applications of shape memory materials

Download or read book International Conference on Martensitic Transformations ICOMAT 2008 written by Gregory Olson and published by John Wiley & Sons. This book was released on 2013-10-09 with total page 1617 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the week of June 29 - July 5, 2008, over 300 scientists and engineers from 30 countries spanning five continents converged at the historic La Fonda Hotel in the city of Santa Fe, New Mexico, USA to participate in the 12th International Conference on Martensitic Transformations (ICOMAT-08) to fathom the peculiar world of certain crystalline materials that undergo structural change when cooled or stressed. Many of these materials can restore their original shape when reheated, thus the name "Shape Memory Alloys". In the spirit of Santa Fe, a central theme of ICOMAT-08 was INTEGRATION across many dimensions.

Download or read book Nanoscale Magnetic Materials and Applications written by J. Ping Liu and published by Springer Science & Business Media. This book was released on 2010-04-05 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale Magnetic Materials and Applications covers exciting new developments in the field of advanced magnetic materials. Readers will find valuable reviews of the current experimental and theoretical work on novel magnetic structures, nanocomposite magnets, spintronic materials, domain structure and domain-wall motion, in addition to nanoparticles and patterned magnetic recording media. Cutting-edge applications in the field are described by leading experts from academic and industrial communities. These include new devices based on domain wall motion, magnetic sensors derived from both giant and tunneling magnetoresistance, thin film devices in micro-electromechanical systems, and nanoparticle applications in biomedicine. In addition to providing an introduction to the advances in magnetic materials and applications at the nanoscale, this volume also presents emerging materials and phenomena, such as magnetocaloric and ferromagnetic shape memory materials, which motivate future development in this exciting field. Nanoscale Magnetic Materials and Applications also features a foreword written by Peter Grünberg, recipient of the 2007 Nobel Prize in Physics.

Download or read book Shape Memory Alloys written by Farzad Ebrahimi and published by BoD – Books on Demand. This book was released on 2017-09-20 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a result of contributions of experts from international scientific community working in different aspects of shape memory alloys (SMAs) and reports on the state-of-the-art research and development findings on this topic through original and innovative research studies. Through its five chapters, the reader will have access to works related to ferromagnetic SMAs, while it introduces some specific applications like development of faster SMA actuators and application of nanostructural SMAs in medical devices. The book contains up-to-date publications of leading experts, and the edition is intended to furnish valuable recent information to the professionals involved in shape memory alloys analysis and applications. The text is addressed not only to researchers but also to professional engineers, students, and other experts in a variety of disciplines, both academic and industrial, seeking to gain a better understanding of what has been done in the field recently and what kind of open problems are in this area.

Download or read book Smart Structures and Materials 1999 written by Manfred Wuttig and published by SPIE-International Society for Optical Engineering. This book was released on 1999 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shape Memory Alloys Handbook written by Christian Lexcellent and published by John Wiley & Sons. This book was released on 2013-04-08 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to understand and describe the martensitic phase transformation and the process of martensite platelet reorientation. These two key elements enable the author to introduce the main features associated with the behavior of shape-memory alloys (SMAs), i.e. the one-way shape-memory effect, pseudo-elasticity, training and recovery. Attention is paid in particular to the thermodynamical frame for solid materials modeling at the macroscopic scale and its applications, as well as to the particular use of such alloys – the simplified calculations for the bending of bars and their torsion. Other chapters are devoted to key topics such as the use of the “crystallographical theory of martensite” for SMA modeling, phenomenological and statistical investigations of SMAs, magneto-thermo-mechanical behavior of magnetic SMAs and the fracture mechanics of SMAs. Case studies are provided on the dimensioning of SMA elements offering the reader an additional useful framework on the subject. Contents 1. Some General Points about SMAs. 2. The World of Shape-memory Alloys. 3. Martensitic Transformation. 4. Thermodynamic Framework for the Modeling of Solid Materials. 5. Use of the “CTM” to Model SMAs. 6. Phenomenological and Statistical Approaches for SMAs. 7. Macroscopic Models with Internal Variables. 8. Design of SMA Elements: Case Studies. 9. Behavior of Magnetic SMAs. 10. Fracture Mechanics of SMAs. 11. General Conclusion. Appendix 1. Intrinsic Properties of Rotation Matrices. Appendix 2. “Twinning Equation” Demonstration. Appendix 3. Calculation of the Parameters a, n and Q from the “Twinning” Equation. Appendix 4. “Twinned” Austenite/Martensite Equation. About the Authors Christian Lexcellent is Emeritus Professor at the École National Supérieure de Mécanique et des Microtechniques de Besançon and a researcher in the Department of Applied Mechanics at FEMTO-ST in France. He is a specialist in the mechanics of materials and phase transition and has taught in the subjects of mechanics of continuum media and shape memory alloys. He is also a member of the International Committee of ESOMAT.

Download or read book Heusler Alloys written by Claudia Felser and published by Springer. This book was released on 2015-11-12 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an overview of the physics of Heusler compounds ranging from fundamental properties of these alloys to their applications. Especially Heusler compounds as half-metallic ferromagnetic and topological insulators are important in condensed matter science due to their potential in magnetism and as materials for energy conversion. The book is written by world-leaders in this field. It offers an ideal reference to researchers at any level.

Download or read book Advances in Shape Memory Materials written by Qingping Sun and published by Springer. This book was released on 2017-03-14 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the development of the shape memory materials and their applications. It covers many aspects of smart materials. It also describes the method on how we can obtain not only large recovery strains but also high recovery stress, energy storage and energy dissipation in applications. This volume treats the mechanical properties of shape memory alloys, shape memory polymers and the constitutive equations of the materials which are necessary to design the shape memory elements in applications. It also deals with the fatigue properties of materials, the method to design the shape memory elements, and the shape memory composites. The authors are international experts on shape memory alloys and shape memory polymers in the metallurgical, chemical, mechanical and engineering fields. The book will be of interest to graduate students, engineers, scientists and designers who are working in the field of electric and mechanical engineering, industries, medical engineering, aerospace engineering, robots, automatic machines, clothes and recycling for research, design and manufacturing.

Download or read book Applications of Synchrotron Radiation Techniques to Materials Science IV Volume 678 written by P. G. Allen and published by . This book was released on 2001-11-13 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners. Much like earlier books in the series, this collection of papers, first published in 2001, brings together the materials science community and the characterization techniques that use synchrotron radiation.

Download or read book Coatings to Improve Optoelectronic Devices written by Selected Articles Published by MDPI and published by MDPI. This book was released on 2020-04-09 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This selection is focused on coatings and films with applications in optoelectronics, such as photovoltaics, photocatalysis, and light-based sensors and phenomena. The studies investigate the optimal composition, crystalline structure, and morphology to deliver the different functionalities sought. Obtaining transparent p-type electrodes is challenging but extremely relevant in optoelectronics. Electric conduction mechanisms and the correlations with structure and doping are discussed. The important issue of the degradation pathways in perovskite-based solar cells and the possibilities offered by different types of coatings to encapsulate the devices as well as the beneficial effect of silica coating as an antireflection and antisoiling layer on well-established solar cells are discussed. New designs of nanoplasmonic films for chemical and biological molecule sensing are reviewed, such as the combination of metallic nanoparticles and nanostructured semiconductors and dispersing metallic or bi-metallic nanoparticles in CuO films. The impacts of structure, defects, and morphology on the photoactivated properties of WO3 films and on the shape memory behavior in Cu–Al–Ni thin films are discussed. Aggregated TiO2 nanoparticles on TiO2 layers are shown to enhance optical transmittance and confer a superhydrophilic characteristic. Finally, aspects of the fundamental characterization of thin films, Drude damping in thin films, and laser-induced deflection technique are discussed.

Download or read book Handbook of Magnetic Materials written by K.H.J. Buschow and published by Elsevier. This book was released on 2006-02-08 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 16 of the Handbook on the Properties of Magnetic Materials, as the preceding volumes, has a dual purpose. As a textbook it is intended to be of assistance to those who wish to be introduced to a given topic in the field of magnetism without the need to read the vast amount of literature published. As a work of reference it is intended for scientists active in magnetism research. To this dual purpose, Volume 16 of the Handbook is composed of topical review articles written by leading authorities. In each of these articles an extensive description is given in graphical as well as in tabular form, much emphasis being placed on the discussion of the experimental material in the framework of physics, chemistry and material science. It provides the readership with novel trends and achievements in magnetism.* composed of topical review articles written by leading authorities.* intended to be of assistance to those who wish to be introduced to a given topic in the field of magnetism.* as a work of reference it is intended for scientists active in magnetism research.* provides the readership with novel trends and achievements in magnetism.

Download or read book Shape Memory Alloys written by Francisco Manuel Braz Fernandes and published by BoD – Books on Demand. This book was released on 2013-04-03 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape memory alloys have become in the past decades a well established research subject. However, the complex relations between properties and structure have created a continuously growing interest for a deeper insight all this time. The complexity of relationships between structure and properties is mostly related to the fact that strong ?multidimensional? interactions are taking place: from the early studies focusing on the thermal and/or mechanical induced phase transformations to the more recent findings on the magnetically induced structural changes. On the other hand, these singular behavioral characteristics have driven a great industrial interest due to the innovative aspects that the applications of shape memory alloys may provide. This makes this subject a highly attractive source of continuous studies, ranging from basics crystallography and thermodynamics to mechanical analysis and electrical and magnetic properties characterization. In this book, a group of recent studies is compiled focusing on a wide range of topics from processing to the relationship between the structure and properties, as well as new applications.

Download or read book Shape Memory Materials for Smart Systems written by Dr. Manfred Kohl and published by . This book was released on 2008 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book European Symposium on Martensitic Transformations written by Sergey Prokoshkin and published by Trans Tech Publications Ltd. This book was released on 2013-01-25 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: ESOMAT 2012 Selected, peer reviewed papers from the 9th European Symposium on Martensitic Transformations ESOMAT 2012, September 9-16, 2012, Saint-Petersburg, Russia

Download or read book Handbook of Giant Magnetostrictive Materials written by Göran Engdahl and published by Elsevier. This book was released on 1999-10-20 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Giant Magnetostrictive Materials contains the knowledge that a mechanical or an electrical engineer needs when considering the use of magnetostrictive materials in a construction project. The book covers the physical origin of giant magnetostriction, its manufacturing and metallurgy, and grain related processes under operation. Comprehensive descriptions of useful models of design methods and tools are given, including the performance of devices and systems comprised of magnetostrictive materials, considering the electrical, magnetic, mechanical, and thermal effects. The book covers all major characterization methods of giant magnetostrictive bulk materials, actuators, and systems. A structured inventory of current and emerging applications of giant magnetostrictive materials is given, covering areas such as sound and vibration sources, vibration control, motional control, material processing, and electromechanical converters. The final chapter offers an up-to-date review of the emerging giant magnetostrictive thin film technologies. The book also contains a market inventory with valuable contact information. - Offers all necessary information for the reader to decide on the applicability of giant magnetostrictive material in a construction - Allows readers to create their own computational design tools based on the model algorithms given in the book; specific programs are also proposed - Gives the reader numerous pieces of advice and hints regarding the further details of construction design, pre-and detail engineering - Provides the reader with information necessary to perform the needed experimental evaluation of materials and actuators in specific applications - Guides the reader through current and potential areas of successful applications of giant magnetostrive materials - Supplies the reader with the necessary contact information to act in the field of giant magnetostrictive materials applications