Download or read book Development of an Ultrasonic Sensing Technique to Measure Lubricant Viscosity in Engine Journal Bearing In Situ written by Michele Schirru and published by Springer. This book was released on 2018-05-04 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents a novel ultrasonic instrument for non-invasive and in-situ characterization of journal bearing lubricant viscosity. In particular, the application to journal bearings is described by non-invasively measuring the viscosity and localized power losses throughout operation. This ultrasonic viscometer is based on the reflection of polarized shear waves from a thin resonating coating layer to increase the measurement sensitivity, in comparison to conventional ultrasonic methods. This instrument allows for a full engine oil viscoelastic characterization in-situ. The book investigates the effects of temperature, pressure and shear rate, and describes in detail the ultrasonic setup and method. Further, it demonstrates that the same technique can be applied similarly to monitor the lubrication of other engine components. As such, it offers a unique instrument that can drive the research of oil formulations to improve engine performance and fulfill the requirements of international fuel economy regulations.
Download or read book Nanolubricants written by Jean Michel Martin and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology involved in lubrication by nanoparticles is a rapidly developing scientific area and one that has been watched with interest for the past ten years. Nanolubrication offers a solution to many problems associated with traditional lubricants that contain sulphur and phosphorus; and though for some time the production of nanoparticles was restricted by the technologies available, today synthesis methods have been improved to such a level that it is possible to produce large quantities relatively cheaply and efficiently. Nanolubricants develops a new concept of lubrication, based on these nanoparticles, and along with the authors’ own research it synthesises the information available on the topic of nanolubrication from existing literature and presents it in a concise form. Describes the many advantages and potential applications of nanotechnology in the tribological field. Offers a full review of the state-of-the-art as well as much original research that is yet unpublished. Includes sections on boundary lubrication by colloïdal systems, nanolubricants made of metal dichalcogenides, carbon-based nanolubricants, overbased detergent salts, nanolubricants made of metals and boron-based solid nanolubricants and lubrication additives. Authored by highly regarded experts in the field with contributions from leading international academics. Nanolubricants will appeal to postgraduate students, academics and researchers in mechanical engineering, chemical engineering and materials science. It should also be of interest to practising engineers with petroleum companies and mechanical manufacturers.
Download or read book A Text Book of Medical Instruments written by S. Ananthi and published by New Age International. This book was released on 2006 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the Book: This book has therefore subdivided the realm of medical instruments into the same sections like a text on physiology and introduces the basic early day methods well, before dealing with the details of present day instruments currently in
Download or read book Power Ultrasonics written by Juan A. Gallego-Juarez and published by Elsevier. This book was released on 2014-11-14 with total page 1167 pages. Available in PDF, EPUB and Kindle. Book excerpt: The industrial interest in ultrasonic processing has revived during recent years because ultrasonic technology may represent a flexible "green alternative for more energy efficient processes. A challenge in the application of high-intensity ultrasound to industrial processing is the design and development of specific power ultrasonic systems for large scale operation. In the area of ultrasonic processing in fluid and multiphase media the development of a new family of power generators with extensive radiating surfaces has significantly contributed to the implementation at industrial scale of several applications in sectors such as the food industry, environment, and manufacturing. Part one covers fundamentals of nonlinear propagation of ultrasonic waves in fluids and solids. It also discusses the materials and designs of power ultrasonic transducers and devices. Part two looks at applications of high power ultrasound in materials engineering and mechanical engineering, food processing technology, environmental monitoring and remediation and industrial and chemical processing (including pharmaceuticals), medicine and biotechnology. - Covers the fundamentals of nonlinear propagation of ultrasonic waves in fluids and solids. - Discusses the materials and designs of power ultrasonic transducers and devices. - Considers state-of-the-art power sonic applications across a wide range of industries.
Download or read book Liquid Crystals in Biotribology written by Sergey Ermakov and published by Springer. This book was released on 2015-07-11 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the theoretical and experimental studies confirming the concept of the liquid-crystalline nature of boundary lubrication in synovial joints. It is shown that cholesteric liquid crystals in the synovial liquid play a significant role in the mechanism of intra-articular friction reduction. The results of structural, rheological and tribological research of the creation of artificial synovial liquids containing cholesteric liquid crystals in natural synovial liquids are described. These liquid crystals reproduce the lubrication properties of natural synovia and provide a high chondroprotective efficiency. They were tested in osteoarthritis models and in clinical practice.
Download or read book Conference Papers Index written by and published by . This book was released on 1987 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultrasonic Transducers for Nondestructive Testing written by Maurice G. Silk and published by CRC Press. This book was released on 1984-01-01 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Modern Sensors written by Jacob Fraden and published by Springer Science & Business Media. This book was released on 2006-04-29 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seven years have passed since the publication of the previous edition of this book. During that time, sensor technologies have made a remarkable leap forward. The sensitivity of the sensors became higher, the dimensions became smaller, the sel- tivity became better, and the prices became lower. What have not changed are the fundamental principles of the sensor design. They are still governed by the laws of Nature. Arguably one of the greatest geniuses who ever lived, Leonardo Da Vinci, had his own peculiar way of praying. He was saying, “Oh Lord, thanks for Thou do not violate your own laws. ” It is comforting indeed that the laws of Nature do not change as time goes by; it is just our appreciation of them that is being re?ned. Thus, this new edition examines the same good old laws of Nature that are employed in the designs of various sensors. This has not changed much since the previous edition. Yet, the sections that describe the practical designs are revised substantially. Recent ideas and developments have been added, and less important and nonessential designs were dropped. Probably the most dramatic recent progress in the sensor technologies relates to wide use of MEMS and MEOMS (micro-electro-mechanical systems and micro-electro-opto-mechanical systems). These are examined in this new edition with greater detail. This book is about devices commonly called sensors. The invention of a - croprocessor has brought highly sophisticated instruments into our everyday lives.
Download or read book Processing of Heavy Crude Oils written by Ramasamy Marappa Gounder and published by . This book was released on 2019-12-18 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Coherence Tomography and Its Non medical Applications written by Michael Wang and published by BoD – Books on Demand. This book was released on 2020-05-27 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical coherence tomography (OCT) is a promising non-invasive non-contact 3D imaging technique that can be used to evaluate and inspect material surfaces, multilayer polymer films, fiber coils, and coatings. OCT can be used for the examination of cultural heritage objects and 3D imaging of microstructures. With subsurface 3D fingerprint imaging capability, OCT could be a valuable tool for enhancing security in biometric applications. OCT can also be used for the evaluation of fastener flushness for improving aerodynamic performance of high-speed aircraft. More and more OCT non-medical applications are emerging. In this book, we present some recent advancements in OCT technology and non-medical applications.
Download or read book Introduction to Instrumentation and Measurements written by Robert B. Northrop and published by CRC Press. This book was released on 2018-09-03 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: Weighing in on the growth of innovative technologies, the adoption of new standards, and the lack of educational development as it relates to current and emerging applications, the third edition of Introduction to Instrumentation and Measurements uses the authors’ 40 years of teaching experience to expound on the theory, science, and art of modern instrumentation and measurements (I&M). What’s New in This Edition: This edition includes material on modern integrated circuit (IC) and photonic sensors, micro-electro-mechanical (MEM) and nano-electro-mechanical (NEM) sensors, chemical and radiation sensors, signal conditioning, noise, data interfaces, and basic digital signal processing (DSP), and upgrades every chapter with the latest advancements. It contains new material on the designs of micro-electro-mechanical (MEMS) sensors, adds two new chapters on wireless instrumentation and microsensors, and incorporates extensive biomedical examples and problems. Containing 13 chapters, this third edition: Describes sensor dynamics, signal conditioning, and data display and storage Focuses on means of conditioning the analog outputs of various sensors Considers noise and coherent interference in measurements in depth Covers the traditional topics of DC null methods of measurement and AC null measurements Examines Wheatstone and Kelvin bridges and potentiometers Explores the major AC bridges used to measure inductance, Q, capacitance, and D Presents a survey of sensor mechanisms Includes a description and analysis of sensors based on the giant magnetoresistive effect (GMR) and the anisotropic magnetoresistive (AMR) effect Provides a detailed analysis of mechanical gyroscopes, clinometers, and accelerometers Contains the classic means of measuring electrical quantities Examines digital interfaces in measurement systems Defines digital signal conditioning in instrumentation Addresses solid-state chemical microsensors and wireless instrumentation Introduces mechanical microsensors (MEMS and NEMS) Details examples of the design of measurement systems Introduction to Instrumentation and Measurements is written with practicing engineers and scientists in mind, and is intended to be used in a classroom course or as a reference. It is assumed that the reader has taken core EE curriculum courses or their equivalents.
Download or read book Ceramic Coatings written by Feng Shi and published by BoD – Books on Demand. This book was released on 2012-02-24 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main target of this book is to state the latest advancement in ceramic coatings technology in various industrial fields. The book includes topics related to the applications of ceramic coating covers in enginnering, including fabrication route (electrophoretic deposition and physical deposition) and applications in turbine parts, internal combustion engine, pigment, foundry, etc.
Download or read book The Social Construction of Technological Systems written by Wiebe E. Bijker and published by MIT Press. This book was released on 1989 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The impact of technology on society is clear and unmistakeable. The influence of society on technology is more subtle. The 13 essays in this book have been written by a diverse group of scholars united by a common interest in creating a new field - the sociology of technology. They draw on a wide array of case studies - from cooking stoves to missile systems, from 15th-century Portugal to today's Al labs - to outline an original research program based on a synthesis of ideas from the social studies of science and the history of technology. Together they affirm the need for a study of technology that gives equal weight to technical, social, economic, and political questions"--Back cover.
Download or read book Advanced Sensors for Real Time Monitoring Applications written by Olga Korostynska and published by MDPI. This book was released on 2021-03-09 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is impossible to imagine the modern world without sensors, or without real-time information about almost everything—from local temperature to material composition and health parameters. We sense, measure, and process data and act accordingly all the time. In fact, real-time monitoring and information is key to a successful business, an assistant in life-saving decisions that healthcare professionals make, and a tool in research that could revolutionize the future. To ensure that sensors address the rapidly developing needs of various areas of our lives and activities, scientists, researchers, manufacturers, and end-users have established an efficient dialogue so that the newest technological achievements in all aspects of real-time sensing can be implemented for the benefit of the wider community. This book documents some of the results of such a dialogue and reports on advances in sensors and sensor systems for existing and emerging real-time monitoring applications.
Download or read book Long Acting Injections and Implants written by Jeremy C. Wright and published by Springer Science & Business Media. This book was released on 2012-01-29 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Long acting injections and implants improve therapy, enhance patient compliance, improve dosing convenience, and are the most appropriate formulation choice for drugs that undergo extensive first pass metabolism or that exhibit poor oral bioavailability. An intriguing variety of technologies have been developed to provide long acting injections and implants. Many considerations need to go into the design of these systems in order to translate a concept from the lab bench to actual therapy for a patient. This book surveys and summarizes the field. Topics covered in Long Acting Injections and Implants include the historical development of the field, drugs, diseases and clinical applications for long acting injections and implants, anatomy and physiology for these systems, specific injectable technologies (including lipophilic solutions, aqueous suspensions, microspheres, liposomes, in situ forming depots and self-assembling lipid formulations), specific implantable technologies (including osmotic implants, drug eluting stents and microfabricated systems), peptide, protein and vaccine delivery, sterilization, drug release testing and regulatory aspects of long acting injections and implants. This volume provides essential information for experienced development professionals but was also written to be useful for scientists just beginning work in the field and for others who need an understanding of long acting injections and implants. This book will also be ideal as a graduate textbook.
Download or read book Microscale Surface Tension and Its Applications written by Pierre Lambert and published by MDPI. This book was released on 2019-10-21 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on advances in miniaturization and soft matter, surface tension effects are a major key to the development of soft/fluidic microrobotics. Benefiting from scaling laws, surface tension and capillary effects can enable sensing, actuation, adhesion, confinement, compliance, and other structural and functional properties necessary in micro- and nanosystems. Various applications are under development: microfluidic and lab-on-chip devices, soft gripping and manipulation of particles, colloidal and interfacial assemblies, fluidic/droplet mechatronics. The capillary action is ubiquitous in drops, bubbles and menisci, opening a broad spectrum of technological solutions and scientific investigations. Identified grand challenges to the establishment of fluidic microrobotics include mastering the dynamics of capillary effects, controlling the hysteresis arising from wetting and evaporation, improving the dispensing and handling of tiny droplets, and developing a mechatronic approach for the control and programming of surface tension effects. In this Special Issue of Micromachines, we invite contributions covering all aspects of microscale engineering relying on surface tension. Particularly, we welcome contributions on fundamentals or applications related to: Drop-botics: fluidic or surface tension-based micro/nanorobotics: capillary manipulation, gripping, and actuation, sensing, folding, propulsion and bio-inspired solutions; Control of surface tension effects: surface tension gradients, active surfactants, thermocapillarity, electrowetting, elastocapillarity; Handling of droplets, bubbles and liquid bridges: dispensing, confinement, displacement, stretching, rupture, evaporation; Capillary forces: modelling, measurement, simulation; Interfacial engineering: smart liquids, surface treatments; Interfacial fluidic and capillary assembly of colloids and devices; Biological applications of surface tension, including lab-on-chip and organ-on-chip systems.
Download or read book Index to Scientific Technical Proceedings written by and published by . This book was released on 1980 with total page 1342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monthly, with annual cumulation. Published conference literature useful both as current awareness and retrospective tools that allow searching by authors of individual papers as well as by editors. Includes proceedings in all formats, i.e., books, reports, journal issues, etc. Complete bibliographical information for each conference proceedings appears in section titled Contents of proceedings, with accompanying category, permuterm subject, sponsor, author/editor, meeting location, and corporate indexes. Contains abbreviations used in organizational and geographical names.
