Download or read book Eco efficient Masonry Bricks and Blocks written by Fernando Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2014-11-27 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masonry walls constitute the interface between the building's interior and the outdoor environment. Masonry walls are traditionally composed of fired-clay bricks (solid or perforated) or blocks (concrete or earth-based), but in the past (and even in the present) they were often associated as needing an extra special thermal and acoustical insulation layer. However, over more recent years investigations on thermal and acoustical features has led to the development of new improved bricks and blocks that no longer need these insulation layers. Traditional masonry units (fired-clay bricks, concrete or earth-based blocks) that don't offer improved performance in terms of thermal and acoustical insulation are a symbol of a low-technology past, that are far removed from the demands of sustainable construction.This book provides an up-to-date state-of-the-art review on the eco-efficiency of masonry units, particular emphasis is placed on the design, properties, performance, durability and LCA of these materials. Since masonry units are also an excellent way to reuse bulk industrial waste the book will be important in the context of the Revised Waste Framework Directive 2008/98/EC which states that the minimum reuse and recycling targets for construction and demolition waste (CDW) should be at least 70% by 2020. On the 9th of March 2011 the European Union approved the Regulation (EU) 305/2011, known as the Construction Products Regulation (CPR) and it will be enforced after the 1st of July 2013. The future commercialization of construction materials in Europe makes their environmental assessment mandatory meaning that more information related to the environmental performance of building materials is much needed. - Provides an authoritative guide to the eco-efficiency of masonry units - Examines the reuse of waste materials - Covers a range of materials including, clay, cement, earth and pumice

Download or read book ICSDEC 2012 written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Urban Drainage Modeling written by Robert W. Brashear and published by . This book was released on 2001 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection contains 91 papers presented at a specialty symposium on urban drainage modeling at the World Water and Environmental Resources Congress, held in Orlando, Florida, May 20-24, 2001.

Download or read book Numerical Modeling of Masonry and Historical Structures written by Bahman Ghiassi and published by Woodhead Publishing. This book was released on 2019-06-15 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Modeling of Masonry and Historical Structures: From Theory to Application provides detailed information on the theoretical background and practical guidelines for numerical modeling of unreinforced and reinforced (strengthened) masonry and historical structures. The book consists of four main sections, covering seismic vulnerability analysis of masonry and historical structures, numerical modeling of unreinforced masonry, numerical modeling of FRP-strengthened masonry, and numerical modeling of TRM-strengthened masonry. Each section reflects the theoretical background and current state-of-the art, providing practical guidelines for simulations and the use of input parameters. - Covers important issues relating to advanced methodologies for the seismic vulnerability assessment of masonry and historical structures - Focuses on modeling techniques used for the nonlinear analysis of unreinforced masonry and strengthened masonry structures - Follows a theory to practice approach

Download or read book Thinking in Systems written by Donella Meadows and published by Chelsea Green Publishing. This book was released on 2008-12-03 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classic book on systems thinking—with more than half a million copies sold worldwide! "This is a fabulous book... This book opened my mind and reshaped the way I think about investing."—Forbes "Thinking in Systems is required reading for anyone hoping to run a successful company, community, or country. Learning how to think in systems is now part of change-agent literacy. And this is the best book of its kind."—Hunter Lovins In the years following her role as the lead author of the international bestseller, Limits to Growth—the first book to show the consequences of unchecked growth on a finite planet—Donella Meadows remained a pioneer of environmental and social analysis until her untimely death in 2001. Thinking in Systems is a concise and crucial book offering insight for problem solving on scales ranging from the personal to the global. Edited by the Sustainability Institute’s Diana Wright, this essential primer brings systems thinking out of the realm of computers and equations and into the tangible world, showing readers how to develop the systems-thinking skills that thought leaders across the globe consider critical for 21st-century life. Some of the biggest problems facing the world—war, hunger, poverty, and environmental degradation—are essentially system failures. They cannot be solved by fixing one piece in isolation from the others, because even seemingly minor details have enormous power to undermine the best efforts of too-narrow thinking. While readers will learn the conceptual tools and methods of systems thinking, the heart of the book is grander than methodology. Donella Meadows was known as much for nurturing positive outcomes as she was for delving into the science behind global dilemmas. She reminds readers to pay attention to what is important, not just what is quantifiable, to stay humble, and to stay a learner. In a world growing ever more complicated, crowded, and interdependent, Thinking in Systems helps readers avoid confusion and helplessness, the first step toward finding proactive and effective solutions.

Download or read book Mathematical Biology written by James D. Murray and published by Springer Science & Business Media. This book was released on 2007-06-12 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Biology is a richly illustrated textbook in an exciting and fast growing field. Providing an in-depth look at the practical use of math modeling, it features exercises throughout that are drawn from a variety of bioscientific disciplines - population biology, developmental biology, physiology, epidemiology, and evolution, among others. It maintains a consistent level throughout so that graduate students can use it to gain a foothold into this dynamic research area.

Download or read book Twentieth Century Building Materials written by Thomas C. Jester and published by Getty Publications. This book was released on 2014-08-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.

Download or read book Structural Modeling and Experimental Techniques Second Edition written by Harry G. Harris and published by CRC Press. This book was released on 1999-03-30 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Modeling and Experimental Techniques presents a current treatment of structural modeling for applications in design, research, education, and product development. Providing numerous case studies throughout, the book emphasizes modeling the behavior of reinforced and prestressed concrete and masonry structures. Structural Modeling and Experimental Techniques: Concentrates on the modeling of the true inelastic behavior of structures Provides case histories detailing applications of the modeling techniques to real structures Discusses the historical background of model analysis and similitude principles governing the design, testing, and interpretation of models Evaluates the limitations and benefits of elastic models Analyzes materials for reinforced concrete masonry and steel models Assesses the critical nature of scale effects of model testing Describes selected laboratory techniques and loading methods Contains material on errors as well as the accuracy and reliability of physical modeling Examines dynamic similitude and modeling techniques for studying dynamic loading of structures Covers actual applications of structural modeling This book serves students in model analysis and experimental methods, professionals manufacturing and testing structural models, as well as professionals testing large or full-scale structures - since the instrumentation techniques and overall approaches for testing large structures are very similar to those used in small-scale modeling work.

Download or read book Fabricate 2020 written by Jane Burry and published by UCL Press. This book was released on 2020-04-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabricate 2020 is the fourth title in the FABRICATE series on the theme of digital fabrication and published in conjunction with a triennial conference (London, April 2020). The book features cutting-edge built projects and work-in-progress from both academia and practice. It brings together pioneers in design and making from across the fields of architecture, construction, engineering, manufacturing, materials technology and computation. Fabricate 2020 includes 32 illustrated articles punctuated by four conversations between world-leading experts from design to engineering, discussing themes such as drawing-to-production, behavioural composites, robotic assembly, and digital craft.

Download or read book Handbook of Research on Seismic Assessment and Rehabilitation of Historic Structures written by Asteris, Panagiotis G. and published by IGI Global. This book was released on 2015-07-13 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rehabilitation of heritage monuments provides sustainable development and cultural significance to a region. The most sensitive aspect of the refurbishment of existing buildings lies in the renovation and recovery of structural integrity and public safety. The Handbook of Research on Seismic Assessment and Rehabilitation of Historic Structures evaluates developing contributions in the field of earthquake engineering with regards to the analysis and treatment of structural damage inflicted by seismic activity. This book is a vital reference source for professionals, researchers, students, and engineers active in the field of earthquake engineering who are interested in the emergent developments and research available in the preservation and rehabilitation of heritage buildings following seismic activity.

Download or read book Math in Society written by David Lippman and published by . This book was released on 2012-09-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Math in Society is a survey of contemporary mathematical topics, appropriate for a college-level topics course for liberal arts major, or as a general quantitative reasoning course.This book is an open textbook; it can be read free online at http://www.opentextbookstore.com/mathinsociety/. Editable versions of the chapters are available as well.

Download or read book Structures by Design written by Rob Whitehead and published by Routledge. This book was released on 2019-07-19 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: *Winner of the 2021 TAA Textbook Excellence Award* Honorable Mention of the 2021 BTES Book Award Structures by Design: Thinking, Making, Breaking is a new type of structures textbook for architects who prefer to learn using the hands-on, creative problem-solving techniques typically found in a design studio. Instead of presenting structures as abstract concepts defined by formulas and diagrams, this book uses a project-based approach to demonstrate how a range of efficient, effective, and expressive architectural solutions can be generated, tested, and revised. Each section of the book is focused on a particular manner by which structural resistance is provided: Form (Arches and Cables), Sections (Beams, Slabs, and Columns), Vectors (Trusses and Space Frames), Surfaces (Shells and Plates), and Frames (Connections and High-Rises). The design exercises featured in each chapter use the Think, Make, Break method of reiterative design to develop and evaluate different structural options. A variety of structural design tools will be used, including the human body, physical models, historical precedents, static diagrams, traditional formulae, and advanced digital analysis. The book can be incorporated into various course curricula and studio exercises because of the flexibility of the format and range of expertise required for these explorations. More than 500 original illustrations and photos provide example solutions and inspiration for further design exploration.

Download or read book Flip Your Classroom written by Jonathan Bergmann and published by International Society for Technology in Education. This book was released on 2012-06-21 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn what a flipped classroom is and why it works, and get the information you need to flip a classroom. You’ll also learn the flipped mastery model, where students learn at their own pace, furthering opportunities for personalized education. This simple concept is easily replicable in any classroom, doesn’t cost much to implement, and helps foster self-directed learning. Once you flip, you won’t want to go back!

Download or read book Resources in Education written by and published by . This book was released on 1987 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computing in Civil and Building Engineering 2014 written by Raymond Issa and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Century of Innovation written by 3M Company and published by 3m Company. This book was released on 2002 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of 3M voices, memories, facts and experiences from the company's first 100 years.

Download or read book Smart and Multifunctional Concrete Toward Sustainable Infrastructures written by Baoguo Han and published by Springer. This book was released on 2017-06-12 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest research advances and findings in the field of smart/multifunctional concretes, focusing on the principles, design and fabrication, test and characterization, performance and mechanism, and their applications in infrastructures. It also discusses future challenges in the development and application of smart/multifunctional concretes, providing useful theory, ideas and principles, as well as insights and practical guidance for developing sustainable infrastructures. It is a valuable resource for researchers, scientists and engineers in the field of civil-engineering materials and infrastructures.