Download or read book Development of a Microprocessor based Adaptive Control System for Steam Turbines written by Richard E. Lord (Jr) and published by . This book was released on 1981 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Real Time Microcomputer Control of Industrial Processes written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of the microprocessor in computer and system engineering has motivated the development of many new concepts and has simplified the design of many modern industrial systems. During the first decade of their life. microprocessors have shown a tremendous evolution in all possible directions (technology. power. functionality. I/O handling. etc). Of course putting the microprocessors and their environmental devices into properly operating systems is a complex and difficult task requiring high skills for melding and integrating hardware. and systemic components. software This book was motivated by the editors' feeling that a cohesive reference is needed providing a good coverage of modern industrial applications of microprocessor-based real time control, together with latest advanced methodological issues. Unavoidably a single volume cannot be exhaustive. but the present book contains a sufficient number of important real-time applications. The book is divided in two sections. Section I deals with general hardware. software and systemic topics. and involves six chapters. Chapter 1. by Gupta and Toong. presents an overview of the development of microprocessors during their first twelve years of existence. Chapter 2. by Dasgupta. deals with a number of system software concepts for real time microprocessor-based systems (task scheduling. memory management. input-output aspects. programming language reqUirements.
Download or read book A Microprocessor based Adaptive Control System written by Gamal M. I. Selim and published by . This book was released on 1982 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 26 (thesis year 1981) a total of 11 ,048 theses titles from 24 Canadian and 21 8 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 26 reports theses submitted in 1981, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book Design of a Microprocessor based Multivariable Control System for Steam Turbines written by Hsiao-Nan L. Chang and published by . This book was released on 1983 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of a Microprocessor based Adaptive Control System for Active Vibration Compensation Using PMN Actuators written by George Raphael Dold and published by . This book was released on 1996 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, SIld disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna and broader dissemination. tional publishing house to assure improved service Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 30 (thesis year 1985) a total of 12,400 theses titles from 26 Canadian and 186 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work.
Download or read book Adaptive Control Systems written by Chalam and published by Routledge. This book was released on 2017-10-19 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: impossible to access. It has been widely scattered in papers, reports, and proceedings ofsymposia, with different authors employing different symbols and terms. But now thereis a book that covers all aspects of this dynamic topic in a systematic manner.Featuring consistent terminology and compatible notation, and emphasizing unifiedstrategies, Adaptive Control Systems provides a comprehensive, integrated accountof basic concepts, analytical tools, algorithms, and a wide variety of application trendsand techniques.Adaptive Control Systems deals not only with the two principal approachesmodelreference adaptive control and self-tuning regulators-but also considers otheradaptive strategies involving variable structure systems, reduced order schemes, predictivecontrol, fuzzy logic, and more. In addition, it highlights a large number of practical applicationsin a range of fields from electrical to biomedical and aerospace engineering ...and includes coverage of industrial robots.The book identifies current trends in the development of adaptive control systems ...delineates areas for further research . : . and provides an invaluable bibliography of over1,200 references to the literature.The first authoritative reference in this important area of work, Adaptive ControlSystems is an essential information source for electrical and electronics, R&D,chemical, mechanical, aerospace, biomedical, metallurgical, marine, transportation, andpower plant engineers. It is also useful as a text in professional society seminars and inhousetraining programs for personnel involved with the control of complex systems, andfor graduate students engaged in the study of adaptive control systems.
Download or read book Power Systems Power Plant Control written by P. Wang and published by Elsevier. This book was released on 2014-05-23 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: The control of power systems and power plants is a subject of worldwide interest which continues to sustain a high level of research, development and application in many diverse yet complementary areas. Papers pertaining to 13 areas directly related to power systems and representing state-of-the-art methods are included in this volume. The topics covered include linear and nonlinear optimization, static and dynamic state estimation, security analysis, generation control, excitation and voltage control, power plant modelling and control, stability analysis, emergency and restorative controls, large-scale sparse matrix techniques, data communication, microcomputer systems, power system stabilizers, load forecasting, optimum generation scheduling and power system control centers. The compilation of this information in one volume makes it essential reading for a comprehension of the current knowledge in the field of power control.
Download or read book Documentation Abstracts written by and published by . This book was released on 1984 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1989 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book On Implementation and Comparrison sic of Microprocessor based Adaptive Control Techniques written by Zuoyi Liu and published by . This book was released on 1989 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microcomputer Based Adaptive Control Applied to Thyristor Driven DC Motors written by Ulrich Keuchel and published by Springer. This book was released on 1994 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology impacts all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computing methods, applications, philosophies, . . . , new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. The autotune method of Astrom and Hagglund had a major impact on the hardware and structure of PID process controllers. However, despite a substantial body of theoretical analysis, progress in transferring the benefits of more general self-tuning methods to industrial devices and processes has been much slower. This volume by Dr's Stephan and Keuchel shows that this type of technology transfer can be achieved and that the more advanced adaptive controllers do give performance benefits over conventional industrial (three term) controllers. The volume also shows the requirements in hardware, the need for software skills and the engineering techniques required to achieve satisfactory results. We hope that by recording their engineering know-how more researchers and industrialists will be encouraged to tap the benefits of advanced self-tuning and adaptive control methods. July, 1993 Michael J. Grimble and M. A. Johnson, Industrial Control Centre, Glasgow, Scotland, U. K.
Download or read book Real Time Digital Control Applications written by A. Alonso-Concheiro and published by Elsevier. This book was released on 2014-05-23 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real Time Digital Control Applications is a compilation of papers presented at the Symposium on Real-Time Digital Control Applications, sponsored by the International Federation of Automatic Control (IFAC) and the International Federation for Information Processing (IFIP), held in Guadalajara, Mexico. The event is organized to provide developing countries with the opportunity to gain insights -- from the sharing of ideas and experiences of experts from around the world to the rapid growth and development of applications of real-time digital control systems, which is considered as the basis of industrial revolution. The book presents and discusses the various scientific, industrial, and technical applications of real-time digital control systems. Applications in power generation, water, metal processing, cement, food, and manufacturing industries are shown. The text also covers applications in robotics, biomedicine, monitoring and failure detection, fuel optimization and heat control, adaptive process control, modeling, and computer software. Industrial engineers, scientists, economists, computer scientists, robotics experts, planners, and technicians will find this book invaluable.
Download or read book Design of a Digital Adaptive Controller for Steam Turbine Control Valves written by Andrew J. Donovan and published by . This book was released on 1986 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microcomputers written by Engineering Information, Inc and published by . This book was released on 1983 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
