Download or read book Development of a Fiber Optic High Temperature Strain Sensor written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-17 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: From 1 Apr. 1991 to 31 Aug. 1992, the Georgia Tech Research Institute conducted a research program to develop a high temperature fiber optic strain sensor as part of a measurement program for the space shuttle booster rocket motor. The major objectives of this program were divided into four tasks. Under Task 1, the literature on high-temperature fiber optic strain sensors was reviewed. Task 2 addressed the design and fabrication of the strain sensor. Tests and calibration were conducted under Task 3, and Task 4 was to generate recommendations for a follow-on study of a distributed strain sensor. Task 4 was submitted to NASA as a separate proposal. Rausch, E. O. and Murphy, K. E. and Brookshire, S. P. Unspecified Center FIBER OPTICS; HIGH TEMPERATURE RESEARCH; HIGH TEMPERATURE TESTS; OPTICAL FIBERS; SENSORS; STRAIN GAGES; STRAIN MEASUREMENT; CALIBRATING; FABRICATION; HIGH TEMPERATURE; SILICON DIOXIDE...

Download or read book Fiber Optic High temperature Strain Sensor Development written by Ekkehart Otto Rausch and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Distributed Optical Fiber Sensing written by Luc Thevenaz and published by Wiley. This book was released on 2012-03 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as a unique, efficient solution to modern demands for security and safety sensing, distributed optical fiber sensing are critical components in areas such as natural disaster prevention and civil engineering. The unique book provides detailed explanations on how to install early warning systems for the prevention of natural disasters, flaws in civil engineering structures (dams, bridges, tunnels), and issues in the oil industry (pipeline leakage detection, off-shore platform anchoring.) Addressing the principles and specificities of distributed fiber sensing, this resource shows different possible implementations, their potential, and their limitations.

Download or read book Optical Fiber Strain Instrumentation for High Temperature Aerospace Structural Monitoring written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-19 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of the program is the development and laboratory demonstration of sensors based on silica optical fibers for measurement of high temperature strain for aerospace materials evaluations. A complete fiber strain sensor system based on white-light interferometry was designed and implemented. An experiment set-up was constructed to permit testing of strain measurement up to 850 C. The strain is created by bending an alumina cantilever beam to which is the fiber sensor is attached. The strain calibration is provided by the application of known beam deflections. To ensure the high temperature operation capability of the sensor, gold-coated single-mode fiber is used. Moreover, a new method of sensor surface attachment which permits accurate sensor gage length determination is also developed. Excellent results were obtained at temperatures up to 800-850 C. Wang, A. Langley Research Center

Download or read book Fiber Optic Sensors written by Eric Udd and published by John Wiley & Sons. This book was released on 2024-03-28 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: FIBER OPTIC SENSORS Discover the latest in fiber optic sensors and their applications in this new edition Fiber-optic sensors are a powerful class of sensor that uses high-bandwidth optical fibers to convey a large amount of measured information through a single fiber. The advantages of such a mode of measurement are clear: they are intrinsically safe in explosive environments (no sparks), lightweight, compact, robust, and potentially inexpensive. As a result, their uses are manifold for a wide range of physical and chemical phenomena including temperature, strain, pressure, acoustic fields, position, velocity, rotation, acceleration, electrical current, liquid level, biochemical composition, and chemical concentration. Fiber Optic Sensors introduces and familiarizes the reader with a broad range of fiber optic sensor techniques and applications. The latest edition of this popular text builds upon the sound introductions to the fundamentals of the topic provided by earlier editions by introducing the latest technologies that have been developed in recent years. Gathering the latest research and publications on the subject in one place, the book provides a comprehensive look at fiber optic sensors with an eye to what’s new in the field. Readers of Fiber Optic Sensors’ third edition will also find: An exploration of the technology within new applications in areas such as aerospace, defense, oil and gas, medical, electric power, manufacturing, environmental, and robotics Updated chapters on the emergency of interferometric sensors, distributed sensing, and critical components A new and fully-updated comprehensive index Fiber Optic Sensors is a useful reference for engineers, scientists, technical managers, as well as advanced undergraduate and graduate students.

Download or read book Strain and Temperature Measurement with Fiber Optic Sensors written by Regis J. Van Steenkiste and published by CRC Press. This book was released on 1996-12-02 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: FROM THE AUTHORS' PREFACE Sensors operating on interferometric principles and mounted inside optical fibers have recently been considered for measuring strain and temperature. Indeed, such sensors have successfully been employed for measuring pressure or temperature in fluids. Fiber optics sensors are especially adept for such measurements because sensors immersed in fluids can easily be calibrated by tests. Unfortunately, the use of fiber optic sensors inside solids is not as straightforward. Owing to the complex interactions between the sensor and the surrounding material, the relationship between the sensor output and the parameters of interest, namely the strain and temperature inside the material, cannot be determined by simple tests. And without the appropriate relationships, fiber optic sensors do not provide meaningful information. In general, the relationship providing the bridge between the sensor output and the engineering values of strain and temperature must be established via analytical models. The major aim of this book is to present such models for extrinsic and intrinsic Fabry-Perot sensors and for Bragg grating sensors embedded in or mounted on the surface of isotropic or anisotropic solids or immersed in fluids. The scope of the book is limited to the theory of fiber optic strain and temperature sensors. Accordingly, we have taken as our starting point the demodulated sensor signals. The hardware needed to produce these signals is not discussed. It is presumed that the reader is familiar with and has access to the sensor, light source, light detector and demodulator required for generating signals which can then be analyzed and interpreted by the methods presented in the book. The problem necessitates complex analytical developments. To assist the reader, the significant results are summarized in tables, and numerical examples are given illustrating the calculation procedures.

Download or read book Development of Temperature compensated Fiber Optic Strain Sensors Based on Fiber Bragg Gratings written by Neil J. Guillermo and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of temperature compensated fiber optic strain sensors based on fiber Bragg gratings is reported. The various sensors manufactured and tested include a stainless steel capillary tube-encased Bragg grating, a partially-bonded Bragg grating, and a fully embedded Bragg grating. Strain and temperature resolution is accomplished by measuring the characteristic Bragg wavelength shift of each Bragg grating sensor relative to its initial wavelength. Another measurement technique used involves calculating the differential strain measurement between two dissimilar resistive strain gauges to determine strain and temperature. Testing is done using both a self-made convection and industrial oven to regulate the temperature, as well as applying strain to the specimen via bending or tension. The performance of the sensors in tracking the strain and temperature in variable strain and variable temperature environments is reported and evaluated. The development of an in-lab convection oven and a stress machine specifically designed for this thesis is also described. Suggestions are made for improvements to the sensors in addition to further developmental research and possible practical temperature compensated fiber optic strain sensor applications.

Download or read book High Temperature Strain Sensor and Mounting Development written by W. Dan Williams and published by . This book was released on 1996 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes Government Work Package Task 29 (GWP29), whose purpose was to develop advanced strain gage technology in support of the National Aerospace Plane (NASP) Program. The focus was on advanced resistance strain gages with a temperature range from room temperature to 2000 F (1095 C) and on methods for reliably attaching these gages to the various materials anticipated for use in the NASP program. Because the NASP program required first-cycle data, the installed gages were not prestabilized or heat treated on the test coupons before first-cycle data were recorded. NASA Lewis Research Center, the lead center for GWP29, continued its development of the palladium-chromium gage; NASA Langley Research Center investigated a new concept gage using Kanthal A1; and the NASA Dryden Flight Research Center chose the well-known BCL-3 iron-chromium-aluminum gage. Each center then tested all three gages. The parameters investigated were apparent strain, drift strain, and gage factor as a function of temperature, plus gage size and survival rate over the test period. Although a significant effort was made to minimize the differences in test equipment between the three test sites (e.g., the same hardware and software were used for final data processing), the center employed different data acquisition systems and furnace configurations so that some inherent differences may be evident in the final results.

Download or read book Structural Health Monitoring of Civil Infrastructure Systems written by Vistasp M. Karbhari and published by Elsevier. This book was released on 2009-08-25 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural health monitoring is an extremely important methodology in evaluating the 'health' of a structure by assessing the level of deterioration and remaining service life of civil infrastructure systems. This book reviews key developments in research, technologies and applications in this area of civil engineering. It discusses ways of obtaining and analysing data, sensor technologies and methods of sensing changes in structural performance characteristics. It also discusses data transmission and the application of both individual technologies and entire systems to bridges and buildings.With its distinguished editors and international team of contributors, Structural health monitoring of civil infrastructure systems is a valuable reference for students in civil and structural engineering programs as well as those studying sensors, data analysis and transmission at universities. It will also be an important source for practicing civil engineers and designers, engineers and researchers developing sensors, network systems and methods of data transmission and analysis, policy makers, inspectors and those responsible for the safety and service life of civil infrastructure. - Reviews key developments in research, technologies and applications - Discusses systems used to obtain and analyse data and sensor technologies - Assesses methods of sensing changes in structural performance

Download or read book Development of Temperature compensated Fiber Optic Strain Sensors Based on Fiber Bragg Gratings written by and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fiber Optic Sensors written by Shizhuo Yin and published by CRC Press. This book was released on 2017-12-19 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for both intrinsic and extrinsic fiber optic sensor technologies continues to grow. To meet the demands of this fast expanding applications-driven market, Fiber Optic Sensors, Second Edition presents both the latest advances in fiber optic sensor technology, such as the application of photonic crystal fibers to fiber optic gyroscopes, and recent application opportunities, including the use of fiber optic sensors as a minimally invasive medical treatment. The new edition of this seminal work highlights the development of fiber optic sensors, while providing an overview of current methods for the construction of high-speed and high-capacity fiber optic systems. Two new chapters cover topics such as femtosecond laser illumination inscription and the growing application sector of fiber optic chemical and biological sensors. Adding significant new material, the book continues to provide a progressive history of each sensor type as well as basic principles and fundamental building blocks for practical applications in the electrical aerospace, defense and manufacturing, smart structure, undersea surveillance, medical, and gas and oil industries.

Download or read book Fiber Optic Fabry Perot Sensors written by Yun-Jiang Rao and published by CRC Press. This book was released on 2017-04-27 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors deliver a complete overview of fiber-optic Fabry-Perot (FFP) sensing technology, integrating the knowledge and tools of multiple fields including optics, sensing, micromachining, instrumentation, physics, and materials science. The main chapters discuss operating principles, microstructures, fabrication methods, signal demodulation, and instrumentation. This treatment spans the full range of structures (intrinsic/extrinsic, multimode fiber vs single-mode fibers), as well as advanced micromachining technologies and major interrogating and multiplexing methods for the formation of multi-point, quasi-distributed sensing networks. Readers will also gain a summary of state-of-the-art applications in oil, gas, and electricity industries, aerospace technology, and biomedicine. Yun-Jiang Rao is Dean of the School of Communication & Information Engineering, and Director of the Key Lab of Optical Fiber Sensing & Communications at the University of Electronic Science and Technology of China. Zeng-Ling Ran and Yuan Gong are both associate professors at the Optical Fiber Technology Research Laboratory of the University of Electronic Science and Technology of China.

Download or read book Fiber Optic Sensors Systems written by and published by Information Gatekeepers Inc. This book was released on with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applications of Optical Fibers for Sensing written by Christian Cuadrado-Laborde and published by BoD – Books on Demand. This book was released on 2019-04-24 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the reader will find a collection of chapters written by different research teams, describing different applications of optical fibers for sensing. This work is mainly addressed to researchers already working in this area, but it is also accessible to anyone with a scientific background who desires to have an updated overview of the recent progress in this domain. It will also be valuable to scientists and engineers who have become newly involved in this field. Each chapter is self-contained and can be read independently of the others. This book intends to provide highlights of the current research in this area, showing the recent advances in the field of optical fiber sensing.

Download or read book Development of Temperature compensated Fiber Optic Strain Sensors Based on Fiber Bragg Gratings microform written by Neil J. Guillermo and published by National Library of Canada = Bibliothèque nationale du Canada. This book was released on 1999 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Health Monitoring Damage Detection Systems for Aerospace written by Markus G. R. Sause and published by Springer Nature. This book was released on 2021 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents established methods of structural health monitoring (SHM) and discusses their technological merit in the current aerospace environment. While the aerospace industry aims for weight reduction to improve fuel efficiency, reduce environmental impact, and to decrease maintenance time and operating costs, aircraft structures are often designed and built heavier than required in order to accommodate unpredictable failure. A way to overcome this approach is the use of SHM systems to detect the presence of defects. This book covers all major contemporary aerospace-relevant SHM methods, from the basics of each method to the various defect types that SHM is required to detect to discussion of signal processing developments alongside considerations of aerospace safety requirements. It will be of interest to professionals in industry and academic researchers alike, as well as engineering students. This article/publication is based upon work from COST Action CA18203 (ODIN - http://odin-cost.com/), supported by COST (European Cooperation in Science and Technology). COST (European Cooperation in Science and Technology) is a funding agency for research and innovation networks. Our Actions help connect research initiatives across Europe and enable scientists to grow their ideas by sharing them with their peers. This boosts their research, career and innovation.

Download or read book Handbook of Optical Fibre Sensing Technology written by José Miguel López-Higuera and published by John Wiley & Sons. This book was released on 2002 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: The pursuit of more efficient telecommunications has resulted in a major research push towards communication systems that are lighter, faster, more reliable and cheaper. This has given rise to great advances in devices and in fibre optics. A spin off of this research is the development of optical sensors, which use photonic materials and concepts. Optical sensors have wide-ranging applications in various fields including telecommunications, civil engineering, chemical industry, biomedical applications and the electrical power industry. This comprehensive handbook, written by a wide spectrum of leading international researchers, offers a clear understanding of the theory as well as focusing on the many practical applications throughout the industry. The book is organised into four main sections: - * Preliminary: Offers an overview of Fiber Optic Sensing Technology, the applications where it can be used successfully and also serves as an overall introduction to the handbook. This section also analyses current publications in the field. * Fundamentals of Photonics and Components for Sensing: Describes the photonic concepts and components needed in order to carried out the understanding, the design, and to realise photonic sensor systems. * Principles and Techniques for Sensing: Provides the principles and techniques in which the photonic sensing technology is based in order to understand how sensors work and how sensors can be made. * Applications: An ample overview of the developments which are successfully taking place in laboratory and field trials, as well as the available sensors in the current market and the future trends in this field. Applications are featured throughout the text, and this section focuses primarily on niche applications. This handbook would prove to be a valuable reference resource for researchers, engineers and postgraduate students in fibre optical sensing, as well as practising engineers in optical communications and electronic engineering, civil engineering, aerospace industry, biomedicine and robotics.