Download or read book Development and Implementation of an Identification Package for Linear Multivariable Systems written by M. Hamiane and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multivariable System Identification For Process Control written by Y. Zhu and published by Elsevier. This book was released on 2001-10-08 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems and control theory has experienced significant development in the past few decades. New techniques have emerged which hold enormous potential for industrial applications, and which have therefore also attracted much interest from academic researchers. However, the impact of these developments on the process industries has been limited.The purpose of Multivariable System Identification for Process Control is to bridge the gap between theory and application, and to provide industrial solutions, based on sound scientific theory, to process identification problems. The book is organized in a reader-friendly way, starting with the simplest methods, and then gradually introducing more complex techniques. Thus, the reader is offered clear physical insight without recourse to large amounts of mathematics. Each method is covered in a single chapter or section, and experimental design is explained before any identification algorithms are discussed. The many simulation examples and industrial case studies demonstrate the power and efficiency of process identification, helping to make the theory more applicable. MatlabTM M-files, designed to help the reader to learn identification in a computing environment, are included.
Download or read book Subspace Identification for Linear Systems written by Peter van Overschee and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Subspace Identification for Linear Systems focuses on the theory, implementation and applications of subspace identification algorithms for linear time-invariant finite- dimensional dynamical systems. These algorithms allow for a fast, straightforward and accurate determination of linear multivariable models from measured input-output data. The theory of subspace identification algorithms is presented in detail. Several chapters are devoted to deterministic, stochastic and combined deterministic-stochastic subspace identification algorithms. For each case, the geometric properties are stated in a main 'subspace' Theorem. Relations to existing algorithms and literature are explored, as are the interconnections between different subspace algorithms. The subspace identification theory is linked to the theory of frequency weighted model reduction, which leads to new interpretations and insights. The implementation of subspace identification algorithms is discussed in terms of the robust and computationally efficient RQ and singular value decompositions, which are well-established algorithms from numerical linear algebra. The algorithms are implemented in combination with a whole set of classical identification algorithms, processing and validation tools in Xmath's ISID, a commercially available graphical user interface toolbox. The basic subspace algorithms in the book are also implemented in a set of Matlab files accompanying the book. An application of ISID to an industrial glass tube manufacturing process is presented in detail, illustrating the power and user-friendliness of the subspace identification algorithms and of their implementation in ISID. The identified model allows for an optimal control of the process, leading to a significant enhancement of the production quality. The applicability of subspace identification algorithms in industry is further illustrated with the application of the Matlab files to ten practical problems. Since all necessary data and Matlab files are included, the reader can easily step through these applications, and thus get more insight in the algorithms. Subspace Identification for Linear Systems is an important reference for all researchers in system theory, control theory, signal processing, automization, mechatronics, chemical, electrical, mechanical and aeronautical engineering.
Download or read book Computer Aided Design in Control Systems 1988 written by Zhen-Yu Chen and published by Elsevier. This book was released on 2017-05-03 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 73 papers, presenting the state of the art in computer-aided design in control systems (CADCS). The latest information and exchange of ideas presented at the Symposium illustrates the development of computer-aided design science and technology within control systems. The Proceedings contain six plenary papers and six special invited papers, and the remainder are divided into five themes: CADCS packages; CADCS software and hardware; systems design methods; CADCS expert systems; CADCS applications, with finally a discussion on CADCS in education and research.
Download or read book Linear Multivariable Systems written by W. A. Wolovich and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text was developed over a three year period of time (1971- 1973) from a variety of notes and references used in the presentation of a senior/first year graduate level course in the Division of En gineering at Brown University titled Linear System Theory. The in tent of the course was not only to introduce students to the more modern, state-space approach to multivariable control system analysis and design, as opposed to the classical, frequency domain approach, but also to draw analogies between the two approaches whenever and wherever possible. It is therefore felt that the material presented will have broader appeal to practicing engineers than a text devoted exclusively to the state-space approach. It was assumed that students taking the course had also taken, as a prerequisite, an undergraduate course in classical control theory and also were familiar with certain standard linear algebraic notions as well as the theory of ordinary differential equations, although a substantial effort was expended to make the material as self-contained as possible. In particular, Chapter 2 is employed to familiarize the reader with a good deal of the mathematical material employed through out the remainder of the text. Chapters 3 through 5 were drawn, in part, from a number of contemporary state-space and matrix algebraic references, as well as some recent research of the author, especially those portions which deal with polynomial matrices and the differential operator approach.
Download or read book Algorithms for Computer Aided Design of Multivariable Control Systems written by S. Bingulac and published by CRC Press. This book was released on 2018-10-08 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference/text discusses the structure and concepts of multivariable control systems, offering a balanced presentation of theory, algorithm development, and methods of implementation.;The book contains a powerful software package - L.A.S (Linear Algebra and Systems) which provides a tool for verifying an analysis technique or control design.;Reviewing the fundamentals of linear algebra and system theory, Algorithms for Computer-Aided Design of Multivariable Control Systems: supplies a solid basis for understanding multivariable systems and their characteristics; highlights the most relevant mathematical developments while keeping proofs and detailed derivations to a minimum; emphasizes the use of computer algorithms; provides special sections of application problems and their solutions to enhance learning; presents a unified theory of linear multi-input, multi-output (MIMO) system models; and introduces new results based on pseudo-controllability and pseudo-observability indices, furnishing algorithms for more accurate internodel conversions.;Illustrated with figures, tables and display equations and containing many previously unpublished results, Algorithms for Computer-Aided Design of Multivariable Control Systems is a reference for electrical and electronics, mechanical and control engineers and systems analysts as well as a text for upper-level undergraduate, graduate and continuing-education courses in multivariable control.
Download or read book System Identification by Reduced Multiple Quadrature written by J. R. Garnett and published by . This book was released on 1978 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report introduces the mathematical development and application of a method for identifying system transfer functions from input-ouput data. Discussion covers: (1) Mathematical development of the method; (2) Application of method for analytical examples; (3) Application of method to numerical examples; (4) Noise consideration; and (5) Extension of method to systems having transport delay, to multivariable systems and to a class of non-linear systems.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book System Identification SYSID 03 written by Paul Van Den Hof and published by Elsevier. This book was released on 2004-06-29 with total page 2080 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of the symposium covers all major aspects of system identification, experimental modelling, signal processing and adaptive control, ranging from theoretical, methodological and scientific developments to a large variety of (engineering) application areas. It is the intention of the organizers to promote SYSID 2003 as a meeting place where scientists and engineers from several research communities can meet to discuss issues related to these areas. Relevant topics for the symposium program include: Identification of linear and multivariable systems, identification of nonlinear systems, including neural networks, identification of hybrid and distributed systems, Identification for control, experimental modelling in process control, vibration and modal analysis, model validation, monitoring and fault detection, signal processing and communication, parameter estimation and inverse modelling, statistical analysis and uncertainty bounding, adaptive control and data-based controller tuning, learning, data mining and Bayesian approaches, sequential Monte Carlo methods, including particle filtering, applications in process control systems, motion control systems, robotics, aerospace systems, bioengineering and medical systems, physical measurement systems, automotive systems, econometrics, transportation and communication systems *Provides the latest research on System Identification *Contains contributions written by experts in the field *Part of the IFAC Proceedings Series which provides a comprehensive overview of the major topics in control engineering.
Download or read book Computer Aided Design in Control and Engineering Systems written by P. Martin Larsen and published by Elsevier. This book was released on 2014-05-17 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Aided Design in Control and Engineering Systems contains the proceedings of the 3rd International Federation of Automatic Control/International Federation for Information Processing Symposium held in Lyngby, Denmark, from July 31 to August 2, 1985. The papers review the state of the art and the trends in development of computer aided design (CAD) of control and engineering systems, techniques, procedures, and concepts. This book is comprised of 74 chapters divided into 17 sections and begins with a description of a prototype computer environment that combines expert control system analysis and design tools. The discussion then turns to decision support systems which could be used to address problems of management and control of large-scale multiproduct multiline batch manufacturing outside the mechanical engineering industries. The following chapters focus on the use of CAD in control education, industrial applications of CAD, and hardware/software systems. Some examples of universal and specialized CAD packages are presented, and applications of CAD in electric power plants, process control systems, and transportation systems are highlighted. The remaining chapters look at CAD/computer aided engineering/computer aided manufacturing systems as well as the use of mathematical methods in CAD. This monograph will be of interest to practitioners in computer science, computer engineering, and industrial engineering.
Download or read book Technical Information Indexes written by and published by . This book was released on 1975 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Awards in Engineering written by and published by . This book was released on 1983 with total page 986 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Linear Multivariable Control written by W. M. Wonham and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: In writing this monograph my objective is to present arecent, 'geometrie' approach to the structural synthesis of multivariable control systems that are linear, time-invariant, and of finite dynamic order. The book is addressed to graduate students specializing in control, to engineering scientists engaged in control systems research and development, and to mathematicians with some previous acquaintance with control problems. The label 'geometrie' is applied for several reasons. First and obviously, the setting is linear state space and the mathematics chiefly linear algebra in abstract (geometrie) style. The basic ideas are the familiar system concepts of controllability and observability, thought of as geometrie properties of distinguished state subspaces. Indeed, the geometry was first brought in out of revulsion against the orgy of matrix manipulation which linear control theory mainly consisted of, not so long ago. But secondlyand of greater interest, the geometrie setting rather quickly suggested new methods of attacking synthesis which have proved to be intuitive and economical; they are also easily reduced to matrix arith metic as soonas you want to compute. The essence of the 'geometrie' approach is just this: instead of looking directly for a feedback laW (say u = Fx) which would solve your synthesis problem if a solution exists, first characterize solvability as a verifiable property of some constructible state subspace, say J. Then, if all is weIl, you may calculate F from J quite easily.
Download or read book Artificial Intelligence in Information and Communication Technologies Healthcare and Education written by Parikshit N Mahalle and published by CRC Press. This book was released on 2022-12-27 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Intelligence in Information and Communication Technologies, Healthcare and Education: A Roadmap Ahead is designed as a reference text and discusses inter-dependability, communication and effective control for the betterment of services through artificial intelligence (AI), as well as the challenges and path ahead for AI in computing and control across different domains of business and human life. The book accommodates technologies and application domains including backbone hardware, systems and methods for deployment, which help incorporating intelligence through different supervised and probabilistic learning approaches. Features The book attempts to establish a connection between hardware, software technologies and algorithmic intelligence for data analysis and decision support in domains such as healthcare, education and other aspects of business and mobility. It presents various recent applications of artificial intelligence in information and communication technologies such as search and optimization methods, machine learning, data representation and ontologies, and multi-agent systems. The book provides a collection of different case studies with experimentation results than mere theoretical and generalized approaches. Covers most of the applications using the trending technologies like machine learning (ML), data science (DS), Internet of Things (IoT), and underlying information and communication technologies. The book is aimed primarily at advanced undergraduates and postgraduate students studying computer science, computer applications, and information technology. Researchers and professionals will also find this book useful.
Download or read book Algorithms for Computer Aided Design of Multivariable Control Systems written by S. Bingulac and published by CRC Press. This book was released on 1993-06-16 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference/text discusses the structure and concepts of multivariable control systems, offering a balanced presentation of theory, algorithm development, and methods of implementation.;The book contains a powerful software package - L.A.S (Linear Algebra and Systems) which provides a tool for verifying an analysis technique or control design.;Reviewing the fundamentals of linear algebra and system theory, Algorithms for Computer-Aided Design of Multivariable Control Systems: supplies a solid basis for understanding multivariable systems and their characteristics; highlights the most relevant mathematical developments while keeping proofs and detailed derivations to a minimum; emphasizes the use of computer algorithms; provides special sections of application problems and their solutions to enhance learning; presents a unified theory of linear multi-input, multi-output (MIMO) system models; and introduces new results based on pseudo-controllability and pseudo-observability indices, furnishing algorithms for more accurate internodel conversions.;Illustrated with figures, tables and display equations and containing many previously unpublished results, Algorithms for Computer-Aided Design of Multivariable Control Systems is a reference for electrical and electronics, mechanical and control engineers and systems analysts as well as a text for upper-level undergraduate, graduate and continuing-education courses in multivariable control.
Download or read book Index to Theses with Abstracts Accepted for Higher Degrees by the Universities of Great Britain and Ireland and the Council for National Academic Awards written by and published by . This book was released on 1997 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theses on any subject submitted by the academic libraries in the UK and Ireland.
Download or read book Trends in Control and Measurement Education written by D.P. Atherton and published by Elsevier. This book was released on 2014-06-28 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the published Proceedings of selected papers from the IFAC Symposium, Swansea, 11-13 July 1988, where a forum was provided for discussion of the latest advances and techniques in the education of control and instrument engineers. Seven major topics were covered to aid lecturers in understanding, developing and presenting systems engineering - control and measurement - as a subject to undergraduate and postgraduate students. The teaching of real-time computer control as a topic and laboratory experiments for both continuous and discrete systems were discussed, as was process control, with the emphasis on providing the student with engineering experience by using scaled-down equipment which would teach practical skills. Included in the Proceedings are papers on measurement and instrumentation, an area felt to be neglected within academic instruction. The development of software tools for systems design within systems engineering was included, as was the exchange of teaching packages and methods between academics, and the education curriculum of systems engineering within developing countries. These Proceedings will prove to be a useful up-to-date guide and reference source for all lecturers and professors involved in curriculum development and the teaching of control and measurement in systems engineering.
