Download or read book Development and Characterization of Resource saving Doping Processes for Industrial Silicon Solar Cells written by Marius Meßmer and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Silicon Heterojunction Solar Cells written by W.R. Fahrner and published by Trans Tech Publications Ltd. This book was released on 2006-08-15 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world of today must face up to two contradictory energy problems: on the one hand, there is the sharply growing consumer demand in countries such as China and India. On the other hand, natural resources are dwindling. Moreover, many of those countries which still possess substantial gas and oil supplies are politically unstable. As a result, renewable natural energy sources have received great attention. Among these, solar-cell technology is one of the most promising candidates. However, there still remains the problem of the manufacturing costs of such cells. Many attempts have been made to reduce the production costs of “conventional” solar cells (manufactured from monocrystalline silicon using diffusion methods) by instead using cheaper grades of silicon, and simpler pn-junction fabrication. That is the ‘hero’ of this book; the heterojunction solar cell.

Download or read book Crystalline Silicon Solar Cells written by Saleem Hussain Zaidi and published by Springer Nature. This book was released on 2021-08-02 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on crystalline silicon solar cell science and technology. It is written from the perspective of an experimentalist with extensive hands-on experience in modeling, fabrication, and characterization. A practical approach to solar cell fabrication is presented in terms of its three components: materials, electrical, and optical. The materials section describes wafer processing methods including saw damage removal, texturing, diffusion, and surface passivation. The electrical section focuses on formation of ohmic contacts on n and p-doped surfaces. The optical section illustrates light interaction with textured silicon surfaces in terms of geometrical, diffractive and physical optics, transmission, and surface photovoltage (SPV) spectroscopy. A final chapter analyzes performance of solar cells, fabricated with a wide range of process parameters. A brief economic analysis on the merits of crystalline silicon-based photovoltaic technology as a cottage industry is also included./div This professional reference will be an important resource for practicing engineers and technicians working with solar cell and PV manufacturing and renewable energy technologies, as well as upper-level engineering and material science students. Presents a practical approach to solar cell fabrication, and characterization; Offers modular methodology with detailed equipment and process parameters supported by experimental results; Includes processing diagrams and tables for 16% efficient solar cell fabrication.

Download or read book Development and Characterization of Laser Chemical Processes for High Efficiency Silicon Solar Cells written by Sven Kluska and published by . This book was released on 2014 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Enabling New Approaches to Low cost Dopant Patterning for Interdigitated Back Contact Crystalline Silicon Solar Cells written by and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Characterization of a Laser Doping Process for Crystalline Silicon Solar Cells written by Mawuli Francis Ametowobla and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Characterization and Fundamental Investigation of Laser Doping for Silicon Solar Cells written by Lujia Xu and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced structures with localized contacts can enable high efficiency crystalline silicon solar cells, but they are complex and costly to fabricate using conventional techniques. Hence, the development of new, cheaper processes to produce localized contact regions is of great interest. One of the most promising processes is laser doping. This thesis explores three main areas related to the challenges of laser doping, in particular the characterization of the laser-doped regions, the degradation of the silicon/dielectric interface in the vicinity of the laser-doped regions, and the degradation of the laser processed silicon. A technique named secondary electron microscopy dopant contrast imaging (SEMDCI) is firstly introduced for the characterisation of the cross-section/top-surface of laser-doped samples. This technique can be used for a large range of different dopant sources and different laser doping methods. The technique can be employed to obtain quantitative dopant density images for p-type laser-doped regions, albeit currently over a limited range of dopant densities and with relatively large error. Using this technique, the risk of metallization shunts near the edges of dielectric film windows opened by the laser can be evaluated. Furthermore, this technique is useful for understanding the interaction between different materials during the laser doping process. The impact of the silicon nitride layer thickness in silicon dioxide / silicon nitride stacks on the properties of laser-doped lines is investigated through measurement of the doping profile near the edge of the dielectric window which is an important factor in determining the likelihood of high recombination or even shunting from the subsequent metallization process. Fundamentally, a problem of exposed and undoped silicon near the dielectric window is identified for most of the investigated parameter range. However, optimization of the laser parameters and dielectric film conditions is shown to be capable of preventing or at least minimizing this problem. Beside this problem, the residual dielectrics close to the edge might be degraded after laser process. Therefore, experimental methods are proposed to detect this possible degradation. In the last part of the thesis, boron diffused samples capped with different dielectric films (including bare surfaces) are processed using laser pulses and characterized by photoluminescence imaging (PL) to study the degradation of the electronic properties of the processed regions. In this way, without the interference of a dopant precursor, the thermal and dielectric effects are separately investigated. It is found that the thermal effects do not lead to significant damage and additional recombination, provided no severe silicon evaporation occurs. However, when a dielectric film is present, a considerable increase in recombination is observed irrespective of laser parameters. The magnitude of the increase in recombination varies substantially depending on the dielectric used. It is demonstrated that both sufficient silicon melting and low recombination can in principle be achieved, particularly using long pulse durations and small pulse distances. In addition, nitrogen gas annealing after laser process was proved to be an effective way to reduce the defects induced by both the thermal effects and dielectrics.

Download or read book Hydrogen Passivation and Laser Doping for Silicon Solar Cells written by Brett Hallam and published by Energy Engineering. This book was released on 2021-09 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic electricity generation is a rapidly growing industry, and a key pillar of a decarbonized energy system. Lasers are used to dope the semiconductor layers in solar cells, and it is necessary to passivate these laser-induced structures to prevent premature charge carrier recombination. This book conveys passivation techniques.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Summary of International Energy Research and Development Activities 1974 1976 written by Smithsonian Science Information Exchange and published by . This book was released on 1977 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents animal sounds in many different languages.

Download or read book Process Development for High efficiency Silicon Solar Cells written by and published by . This book was released on 1991 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabrication of high-efficiency silicon solar cells in an industrial environment requires a different optimization than in a laboratory environment. Strategies are presented for process development of high-efficiency silicon solar cells, with a goal of simplifying technology transfer into an industrial setting. The strategies emphasize the use of statistical experimental design for process optimization, and the use of baseline processes and cells for process monitoring and quality control. 8 refs.

Download or read book Characterisation and modeling of highly doped regions in silicon solar cells written by Freerk J. Bisschop and published by . This book was released on 1992 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thin Film Solar Cells written by Jef Poortmans and published by John Wiley & Sons. This book was released on 2006-10-16 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin-film solar cells are either emerging or about to emerge from the research laboratory to become commercially available devices finding practical various applications. Currently no textbook outlining the basic theoretical background, methods of fabrication and applications currently exist. Thus, this book aims to present for the first time an in-depth overview of this topic covering a broad range of thin-film solar cell technologies including both organic and inorganic materials, presented in a systematic fashion, by the scientific leaders in the respective domains. It covers a broad range of related topics, from physical principles to design, fabrication, characterization, and applications of novel photovoltaic devices.

Download or read book Solar Cells and Modules written by Arvind Shah and published by Springer Nature. This book was released on 2020-07-16 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive introduction to the field of photovoltaic (PV) solar cells and modules. In thirteen chapters, it addresses a wide range of topics including the spectrum of light received by PV devices, the basic functioning of a solar cell, and the physical factors limiting the efficiency of solar cells. It places particular emphasis on crystalline silicon solar cells and modules, which constitute today more than 90 % of all modules sold worldwide. Describing in great detail both the manufacturing process and resulting module performance, the book also touches on the newest developments in this sector, such as Tunnel Oxide Passivated Contact (TOPCON) and heterojunction modules, while dedicating a major chapter to general questions of module design and fabrication. Overall, it presents the essential theoretical and practical concepts of PV solar cells and modules in an easy-to-understand manner and discusses current challenges facing the global research and development community.

Download or read book Energy written by and published by . This book was released on 1983 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Efficiency Silicon Solar Cells written by Martin A. Green and published by Trans Tech Publications Ltd. This book was released on 1987-01-01 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The early chapters comprehensively review the optical and transport properties of silicon. Light trapping is described in detail. Limits on the efficiency of silicon cells are discussed as well as material requirements necessary to approach these limits. The status of current approaches to passifying surfaces, contacts and bulk regions is reviewed. The final section of the book describes the most practical approaches to the fabrication of high-efficiency cells capable of meeting the efficiency targets for both concentrated and non-concentrated sunlight, including a discussion of design and processing approaches for non-crystalline silicon.

Download or read book Solar Energy Update written by and published by . This book was released on 1984 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: