Download or read book Developing an Advanced Thermal Comfort Model for Environmental Design written by Han Yan and published by . This book was released on 2003 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials for Energy Efficiency and Thermal Comfort in Buildings written by Matthew R Hall and published by Elsevier. This book was released on 2010-04-21 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost half of the total energy produced in the developed world is inefficiently used to heat, cool, ventilate and control humidity in buildings, to meet the increasingly high thermal comfort levels demanded by occupants. The utilisation of advanced materials and passive technologies in buildings would substantially reduce the energy demand and improve the environmental impact and carbon footprint of building stock worldwide.Materials for energy efficiency and thermal comfort in buildings critically reviews the advanced building materials applicable for improving the built environment. Part one reviews both fundamental building physics and occupant comfort in buildings, from heat and mass transport, hygrothermal behaviour, and ventilation, on to thermal comfort and health and safety requirements.Part two details the development of advanced materials and sustainable technologies for application in buildings, beginning with a review of lifecycle assessment and environmental profiling of materials. The section moves on to review thermal insulation materials, materials for heat and moisture control, and heat energy storage and passive cooling technologies. Part two concludes with coverage of modern methods of construction, roofing design and technology, and benchmarking of façades for optimised building thermal performance.Finally, Part three reviews the application of advanced materials, design and technologies in a range of existing and new building types, including domestic, commercial and high-performance buildings, and buildings in hot and tropical climates.This book is of particular use to, mechanical, electrical and HVAC engineers, architects and low-energy building practitioners worldwide, as well as to academics and researchers in the fields of building physics, civil and building engineering, and materials science. - Explores improving energy efficiency and thermal comfort through material selection and sustainable technologies - Documents the development of advanced materials and sustainable technologies for applications in building design and construction - Examines fundamental building physics and occupant comfort in buildings featuring heat and mass transport, hygrothermal behaviour and ventilation
Download or read book Advanced Studies in Efficient Environmental Design and City Planning written by Ferdinando Trapani and published by Springer Nature. This book was released on 2021-09-24 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains how learning from past mistakes in urban design can help to enhance sustainable cities and how the principles of Green Urbanism can yield more resilient urban settlements. Environmental design is a fundamental principle in shaping cities. However, environmental challenges like increased resource consumption, water degradation and waste-related issues are among the greatest problems now facing humanity – which is why these issues need to be considered with regard to “smart cities,” either for the development of new urban centers or for the transformation of existing cities. The book not only discusses the importance of integrating sustainability principles in the urban design process, but also demonstrates their application to the development of sustainable cities. As such, the book offers essential information and a source of inspiration for all those who want to build more sustainable cities.
Download or read book Adaptive Thermal Comfort of Indoor Environment for Residential Buildings written by David Bienvenido-Huertas and published by Springer Nature. This book was released on 2021-03-31 with total page 79 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is structured in four parts: First, it analyzes the sustainability objectives established for the building stock and the importance of thermal comfort in this aspect. Second, the existing adaptive thermal comfort models and the main energy-saving measures associated with these models are analyzed. Third, the energy savings obtained with these measures are analyzed in several case studies, comparing the results obtained with other energy conservation measures, such as the improvement of the façade. The analysis is carried out from an energy and economic perspective. Finally, a decision‐making process based on fuzzy logic is established. As an expected result, the content of the book contributes to assist architects in designing more efficient buildings from the perspective of user behavior.
Download or read book Sunset Building written by Charles C. Benton and published by . This book was released on 1994 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adaptive Thermal Comfort Principles and Practice written by Fergus Nicol and published by Routledge. This book was released on 2012-03-15 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fundamental function of buildings is to provide safe and healthy shelter. For the fortunate they also provide comfort and delight. In the twentieth century comfort became a 'product' produced by machines and run on cheap energy. In a world where fossil fuels are becoming ever scarcer and more expensive, and the climate more extreme, the challenge of designing comfortable buildings today requires a new approach. This timely book is the first in a trilogy from leaders in the field which will provide just that. It explains, in a clear and comprehensible manner, how we stay comfortable by using our bodies, minds, buildings and their systems to adapt to indoor and outdoor conditions which change with the weather and the climate. The book is in two sections. The first introduces the principles on which the theory of adaptive thermal comfort is based. The second explains how to use field studies to measure thermal comfort in practice and to analyze the data gathered. Architects have gradually passed responsibility for building performance to service engineers who are largely trained to see comfort as the ‘product’, designed using simplistic comfort models. The result has contributed to a shift to buildings that use ever more energy. A growing international consensus now calls for low-energy buildings. This means designers must first produce robust, passive structures that provide occupants with many opportunities to make changes to suit their environmental needs. Ventilation using free, natural energy should be preferred and mechanical conditioning only used when the climate demands it. This book outlines the theory of adaptive thermal comfort that is essential to understand and inform such building designs. This book should be required reading for all students, teachers and practitioners of architecture, building engineering and management – for all who have a role in producing, and occupying, twenty-first century adaptive, low-carbon, comfortable buildings.
Download or read book Outdoor Thermal Comfort in Urban Environment written by Kevin Ka-Lun Lau and published by Springer Nature. This book was released on 2021-09-16 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the importance of outdoor thermal comfort for improving urban living quality in the context of urban planning and urban geometry design. It introduces readers to a range of assessment methods and applications of outdoor thermal comfort and addresses urban geometry and thermal environment at the neighbourhood scale using real-world examples and parametric studies. In addition, the subjective evaluations by urban dwellers and numerical modelling tools introduced in this book provide not only a comprehensive assessment of outdoor thermal comfort but also an integrated approach to using thermal comfort indicators as a standard in high-density cities. Given its scope, the book offers a valuable guide for urban climate researchers, urban planners, and designers, and policymakers pursuing more liveable urban environments.
Download or read book Environmental Design of Urban Buildings written by Mat Santamouris and published by Earthscan. This book was released on 2013 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of an integrated approach in urban design is becoming increasingly apparent. This book explains how to overcome related challenges in environmental design of urban buildings and offers guidance on the use of new materials and techniques and the integration of new philosophies. Supported by the EC's SAVE 13 programme, Environmental Design of Urban Buildings includes contributions from experts at the National and Kapodistrian University of Athens, Greece, the Hellenic Open University, Greece, Cambridge Architectural Research, UK and REHVA/University of Ljubljana, Slovenia. A free CD-ROM containing multi-media software tools and climatic data accompanies the book. CONTENTS Environmental Urban Design * Architectural Design, Passive Environmental and Building Engineering Systems * Environmental Issues of Building Design * Sustainable Design, Construction and Operation * Intelligent Controls and Advanced Building Management Systems * Urban Building Climatology * Heat and Mass Transfer Phenomena in Urban Buildings * Applied Lighting Technologies for Urban Buildings * Case Studies * Guidelines to Integrate Energy Conservation * Indoor Air Quality * Applied Energy and Resources Management in the Urban Environment * Economic Methodologies * Integrated Building Design * Bibliography, Index Published with SAVE
Download or read book Adaptive Thermal Comfort Foundations and Analysis written by Michael Humphreys and published by Routledge. This book was released on 2015-08-27 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been widespread dissatisfaction with accepted models for predicting the conditions that people will find thermally comfortable in buildings. These models require knowledge about clothing and activity, but can give little guidance on how to quantify them in any future situation. This has forced designers to make assumptions about people’s future behaviour based on very little information and, as a result, encouraged static design indoor temperatures. This book is the second in a three volume set covering all aspects of Adaptive Thermal Comfort. The first part narrates the development of the adaptive approach to thermal comfort from its early beginnings in the 1960s. It discusses recent work in the field and suggests ways in which it can be developed and modelled. Such models can be used to set dynamic, interactive standards for thermal comfort which will help overcome the problems inherited from the past. The second part of the volume engages with the practical and theoretical problems encountered in field studies and in their statistical analysis, providing guidance towards their resolution, so that valid conclusions may be drawn from such studies.
Download or read book Energy Simulation in Building Design written by Joseph Clarke and published by Routledge. This book was released on 2007-11-02 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the appearance of the first edition of 'Energy Simulation in Building Design', the use of computer-based appraisal tools to solve energy design problems within buildings has grown rapidly. A leading figure in this field, Professor Joseph Clarke has updated his book throughout to reflect these latest developments. The book now includes material on combined thermal/lighting and CFD simulation, advanced glazings, indoor air quality and photovoltaic components. This thorough revision means that the book remains the key text on simulation for architects, building engineering consultants and students of building engineering and environmental design of buildings. The book's purpose is to help architects, mechanical & environmental engineers and energy & facility managers to understand and apply the emerging computer methods for options appraisal at the individual building, estate, city, region and national levels. This is achieved by interspersing theoretical derivations relating to simulation within an evolving description of the built environment as a complex system. The premise is that the effective application of any simulation tool requires a thorough understanding of the domain it addresses.
Download or read book Human Thermal Comfort written by Ken Parsons and published by CRC Press. This book was released on 2019-11-20 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal comfort is a desirable state familiar to all people. Providing inspirational indoor and outdoor environments that provide thermal comfort, in the context of energy use and climate change, is a challenge for the 21st century. This book provides an up-to-date, comprehensive coverage of thermal comfort from principles and theory to practical application. The book begins with current knowledge and understanding of thermal comfort and its application to providing thermal conditions for indoor and outdoor environments. It integrates and presents new ideas to provide a comprehensive model of thermal comfort so that we can move on from the 20th and early 21st century and provide a focus for developments for future decades. This book will be of interest to practitioners and students and anyone involved with fields such as environmental design, physiology, ergonomics, human factors, industrial hygiene, architecture, health and safety and air conditioning. • Provides current thermal comfort standards and regulations • Describes the PMV, PPD, ET* and SET thermal comfort indices • Discusses adaptive thermal comfort, adaptive opportunity and explains why we have not moved towards a more dynamic and interactive approach to providing thermal comfort • Presents a new model relating thermal discomfort to performance • Shows how to construct a computer model of thermal comfort • Offers how to conduct a thermal comfort survey Human Thermal Comfort provides new ideas for achieving thermal comfort for offices, vehicles, atriums, and plazas of the future.
Download or read book Adaptive Thermal Comfort Principles and Practice written by Fergus Nicol and published by Routledge. This book was released on 2012-03-15 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fundamental function of buildings is to provide safe and healthy shelter. For the fortunate they also provide comfort and delight. In the twentieth century comfort became a 'product' produced by machines and run on cheap energy. In a world where fossil fuels are becoming ever scarcer and more expensive, and the climate more extreme, the challenge of designing comfortable buildings today requires a new approach. This timely book is the first in a trilogy from leaders in the field which will provide just that. It explains, in a clear and comprehensible manner, how we stay comfortable by using our bodies, minds, buildings and their systems to adapt to indoor and outdoor conditions which change with the weather and the climate. The book is in two sections. The first introduces the principles on which the theory of adaptive thermal comfort is based. The second explains how to use field studies to measure thermal comfort in practice and to analyze the data gathered. Architects have gradually passed responsibility for building performance to service engineers who are largely trained to see comfort as the ‘product’, designed using simplistic comfort models. The result has contributed to a shift to buildings that use ever more energy. A growing international consensus now calls for low-energy buildings. This means designers must first produce robust, passive structures that provide occupants with many opportunities to make changes to suit their environmental needs. Ventilation using free, natural energy should be preferred and mechanical conditioning only used when the climate demands it. This book outlines the theory of adaptive thermal comfort that is essential to understand and inform such building designs. This book should be required reading for all students, teachers and practitioners of architecture, building engineering and management – for all who have a role in producing, and occupying, twenty-first century adaptive, low-carbon, comfortable buildings.
Download or read book Design and Management of Sustainable Built Environments written by Runming Yao and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Climate change is believed to be a great challenge to built environment professionals in design and management. An integrated approach in delivering a sustainable built environment is desired by the built environment professional institutions. The aim of this book is to provide an advanced understanding of the key subjects required for the design and management of modern built environments to meet carbon emission reduction targets. In Design and Management of Sustainable Built Environments, an international group of experts provide comprehensive and the most up-to-date knowledge, covering sustainable urban and building design, management and assessment. The best practice case studies of the implementation of sustainable technology and management from the BRE Innovation Park are included. Design and Management of Sustainable Built Environments will be of interest to urban and building designers, environmental engineers, and building performance assessors. It will be particularly useful as a reference book for undergraduate and postgraduate students in the built environment field.
Download or read book Thermal Comfort Assessment of Buildings written by Salvatore Carlucci and published by Springer Science & Business Media. This book was released on 2013-05-24 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: A number of metrics for assessing human thermal response to climatic conditions have been proposed in scientific literature over the last decades. They aim at describing human thermal perception of the thermal environment to which an individual or a group of people is exposed. More recently, a new type of “discomfort index” has been proposed for describing, in a synthetic way, long-term phenomena. Starting from a systematic review of a number of long-term global discomfort indices, they are then contrasted and compared on a reference case study in order to identify their similarities and differences and strengths and weaknesses. Based on this analysis, a new short-term local discomfort index is proposed for the American Adaptive comfort model. Finally, a new and reliable long-term general discomfort index is presented. It is delivered in three versions and each of them is suitable to be respectively coupled with the Fanger, the European Adaptive and the American Adaptive comfort models.
Download or read book Indoor Thermal Comfort written by Francesca Romana d’Ambrosio Alfano and published by MDPI. This book was released on 2020-12-07 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the century begins, natural resources are under increasing pressure, threatening public health and development. As a result, the balance between man and nature has been disrupted, with climatic changes whose effects are starting to be irreversible. Due to the relationship between the quality of the indoor built environment and its energy demand, thermal comfort issues are still relevant in the disciplinary debate. This is also because the indoor environment has a potential impact on occupants' health and productivity, affecting their physical and psychological conditions. To achieve a sustainable compromise in terms of comfort and energy requirements, several challenging questions must be answered with regard to design, technical, engineering, psychological, and physiological issues and, finally, potential interactions with other IEQ issues that require a holistic way to conceive the building envelope design. This Special Issue collected original research and review articles on innovative designs, systems, and/or control domains that can enhance thermal comfort, work productivity, and wellbeing in a built environment, along with works considering the integration of human factors in buildings’ energy performance.
Download or read book Sustainable Houses and Living in the Hot Humid Climates of Asia written by Tetsu Kubota and published by Springer. This book was released on 2018-06-21 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides information on the latest research findings that are useful in the context of designing sustainable houses and living in rapidly growing Asian cities. The book is composed of seven parts, comprising a total of 50 chapters written by 53 authors from various countries, mainly in the Asian region. Part I introduces vernacular houses in different Asian countries such as Indonesia, Malaysia, India, Nepal, China, Thailand and Laos. Parts II and III then explore in depth indoor adaptive thermal comfort and occupants’ adaptive behavior, focusing especially on those in hot-humid climates. Part IV presents detailed survey results on household energy consumption in various tropical Asian cities, while Part V analyses the indoor thermal conditions in both traditional houses and modern houses in these countries. Several real-world sustainable housing practices in Asian cities are reviewed in the following part. The final part then discusses the vulnerability of expanding Asian cities to climate change and urban heat island. Today, approximately 35-40% of global energy is consumed in Asia, and this percentage is expected to rise further. Energy consumption has increased, particularly in the residential sector, in line with the rapid rise of the middle class. The majority of growing Asian cities are located in hot and humid climate regions, and as such there is an urgent need for designers to provide healthy and comfortable indoor environments that do not consume non-renewable energy or resources excessively. This book is essential reading for anyone with an interest in sustainable house design in the growing cities of Asia.
Download or read book Building Performance Simulation for Design and Operation written by Jan L.M. Hensen and published by Routledge. This book was released on 2012-09-10 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective building performance simulation can reduce the environmental impact of the built environment, improve indoor quality and productivity, and facilitate future innovation and technological progress in construction. It draws on many disciplines, including physics, mathematics, material science, biophysics and human behavioural, environmental and computational sciences. The discipline itself is continuously evolving and maturing, and improvements in model robustness and fidelity are constantly being made. This has sparked a new agenda focusing on the effectiveness of simulation in building life-cycle processes. Building Performance Simulation for Design and Operation begins with an introduction to the concepts of performance indicators and targets, followed by a discussion on the role of building simulation in performance-based building design and operation. This sets the ground for in-depth discussion of performance prediction for energy demand, indoor environmental quality (including thermal, visual, indoor air quality and moisture phenomena), HVAC and renewable system performance, urban level modelling, building operational optimization and automation. Produced in cooperation with the International Building Performance Simulation Association (IBPSA), and featuring contributions from fourteen internationally recognised experts in this field, this book provides a unique and comprehensive overview of building performance simulation for the complete building life-cycle from conception to demolition. It is primarily intended for advanced students in building services engineering, and in architectural, environmental or mechanical engineering; and will be useful for building and systems designers and operators.
