Download or read book Determining Sample Size and Power in Research Studies written by J. P. Verma and published by Springer Nature. This book was released on 2020-07-20 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses sample size and power in the context of research, offering valuable insights for graduate and doctoral students as well as researchers in any discipline where data is generated to investigate research questions. It explains how to enhance the authenticity of research by estimating the sample size and reporting the power of the tests used. Further, it discusses the issue of sample size determination in survey studies as well as in hypothesis testing experiments so that readers can grasp the concept of statistical errors, minimum detectable difference, effect size, one-tail and two-tail tests and the power of the test. The book also highlights the importance of fixing these boundary conditions in enhancing the authenticity of research findings and improving the chances of research papers being accepted by respected journals. Further, it explores the significance of sample size by showing the power achieved in selected doctoral studies. Procedure has been discussed to fix power in the hypothesis testing experiment. One should usually have power at least 0.8 in the study because having power less than this will have the issue of practical significance of findings. If the power in any study is less than 0.5 then it would be better to test the hypothesis by tossing a coin instead of organizing the experiment. It also discusses determining sample size and power using the freeware G*Power software, based on twenty-one examples using different analyses, like t-test, parametric and non-parametric correlations, multivariate regression, logistic regression, independent and repeated measures ANOVA, mixed design, MANOVA and chi-square.

Download or read book Sample Size Determination in Quantitative Social Work Research written by Patrick Dattalo and published by Oxford University Press. This book was released on 2008-01-11 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: A researcher's decision about the sample to draw in a study may have an enormous impact on the results, and it rests on numerous statistical and practical considerations that can be difficult to juggle. Computer programs help, but no single software package exists that allows researchers to determine sample size across all statistical procedures. This pocket guide shows social work students, educators, and researchers how to prevent some of the mistakes that would result from a wrong sample size decision by describing and critiquing four main approaches to determining sample size. In concise, example-rich chapters, Dattalo covers sample-size determination using power analysis, confidence intervals, computer-intensive strategies, and ethical or cost considerations, as well as techniques for advanced and emerging statistical strategies such as structural equation modeling, multilevel analysis, repeated measures MANOVA and repeated measures ANOVA. He also offers strategies for mitigating pressures to increase sample size when doing so may not be feasible. Whether as an introduction to the process for students or as a refresher for experienced researchers, this practical guide is a perfect overview of a crucial but often overlooked step in empirical social work research.

Download or read book Determination of Sample Size and Power Analysis with G Power Software written by Priyam Verma and published by . This book was released on 2017-08-17 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a step-wise approach to determine the sample size and power in survey studies and hypothesis testing experiments. Concepts involved in the process have been discussed in a crisp and easy manner so that one can understand them even without having much knowledge of statistical techniques. The G*Power software, which is a freeware has been used to determine sample size and power in research studies. In order to make it more simple lots of screenshots have been used so that the researchers can determine their own sample size in different types of experiments for specific power.

Download or read book Statistical Power Analysis for the Behavioral Sciences written by Jacob Cohen and published by Routledge. This book was released on 2013-05-13 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Statistical Power Analysis is a nontechnical guide to power analysis in research planning that provides users of applied statistics with the tools they need for more effective analysis. The Second Edition includes: * a chapter covering power analysis in set correlation and multivariate methods; * a chapter considering effect size, psychometric reliability, and the efficacy of "qualifying" dependent variables and; * expanded power and sample size tables for multiple regression/correlation.

Download or read book A Primer on Partial Least Squares Structural Equation Modeling PLS SEM written by Joseph F. Hair, Jr. and published by SAGE Publications. This book was released on 2016-02-29 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Primer on Partial Least Squares Structural Equation Modeling (PLS-SEM) by Joseph F. Hair, Jr., G. Tomas M. Hult, Christian Ringle, and Marko Sarstedt is a practical guide that provides concise instructions on how to use partial least squares structural equation modeling (PLS-SEM), an evolving statistical technique, to conduct research and obtain solutions. Featuring the latest research, new examples using the SmartPLS software, and expanded discussions throughout, the Second Edition is designed to be easily understood by those with limited statistical and mathematical training who want to pursue research opportunities in new ways.

Download or read book Practical Statistical Power Analysis written by Zhiyong Zhang and published by Isdsa Press. This book was released on 2018-05 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of conducting a statistical power analysis at the beginning of a study is universally accepted. Without careful planning, a study can easily fail to detect an existing effect by chance. This book teaches how to conduct power analysis for a range of models from correlation and t-test to structural equation models and multilevel models. Both a graphical Web software WebPower and an R package are introduced to practically conduct the analysis.

Download or read book Mastering SAS Programming for Data Warehousing written by Monika Wahi and published by Packt Publishing Ltd. This book was released on 2020-10-16 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build a strong foundation in SAS data warehousing by understanding data transformation code and policy, data stewardship and management, interconnectivity between SAS and other warehousing products, and print and web reporting Key FeaturesUnderstand how to use SAS macros for standardizing extract, transform, and load (ETL) protocolsDevelop and use data curation files for effective warehouse managementLearn how to develop and manage ETL, policies, and print and web reports that meet user needsBook Description SAS is used for various functions in the development and maintenance of data warehouses, thanks to its reputation of being able to handle ’big data’. This book will help you learn the pros and cons of storing data in SAS. As you progress, you’ll understand how to document and design extract-transform-load (ETL) protocols for SAS processes. Later, you’ll focus on how the use of SAS arrays and macros can help standardize ETL. The book will also help you examine approaches for serving up data using SAS and explore how connecting SAS to other systems can enhance the data warehouse user’s experience. By the end of this data management book, you will have a fundamental understanding of the roles SAS can play in a warehouse environment, and be able to choose wisely when designing your data warehousing processes involving SAS. What you will learnDevelop efficient ways to manage data input/output (I/O) in SASCreate and manage extract, transform, and load (ETL) code in SASStandardize ETL through macro variables, macros, and arraysIdentify data warehouse users and ensure their needs are metDesign crosswalk and other variables to serve analyst needsMaintain data curation files to improve communication and managementUse the output delivery system (ODS) for print and web reportingConnect other products to SAS to optimize storage and reportingWho this book is for This book is for data architects, managers leading data projects, and programmers or developers using SAS who want to effectively maintain a data lake, data mart, or data warehouse.

Download or read book Sample Size Determination and Power written by Thomas P. Ryan and published by John Wiley & Sons. This book was released on 2013-05-28 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive approach to sample size determination and power with applications for a variety of fields Sample Size Determination and Power features a modern introduction to the applicability of sample size determination and provides a variety of discussions on broad topics including epidemiology, microarrays, survival analysis and reliability, design of experiments, regression, and confidence intervals. The book distinctively merges applications from numerous fields such as statistics, biostatistics, the health sciences, and engineering in order to provide a complete introduction to the general statistical use of sample size determination. Advanced topics including multivariate analysis, clinical trials, and quality improvement are addressed, and in addition, the book provides considerable guidance on available software for sample size determination. Written by a well-known author who has extensively class-tested the material, Sample Size Determination and Power: Highlights the applicability of sample size determination and provides extensive literature coverage Presents a modern, general approach to relevant software to guide sample size determination including CATD (computer-aided trial design) Addresses the use of sample size determination in grant proposals and provides up-to-date references for grant investigators An appealing reference book for scientific researchers in a variety of fields, such as statistics, biostatistics, the health sciences, mathematics, ecology, and geology, who use sampling and estimation methods in their work, Sample Size Determination and Power is also an ideal supplementary text for upper-level undergraduate and graduate-level courses in statistical sampling.

Download or read book Sample Size Calculations in Clinical Research written by Shein-Chung Chow and published by CRC Press. This book was released on 2017-08-15 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the Second Edition: "... this is a useful, comprehensive compendium of almost every possible sample size formula. The strong organization and carefully defined formulae will aid any researcher designing a study." -Biometrics "This impressive book contains formulae for computing sample size in a wide range of settings. One-sample studies and two-sample comparisons for quantitative, binary, and time-to-event outcomes are covered comprehensively, with separate sample size formulae for testing equality, non-inferiority, and equivalence. Many less familiar topics are also covered ..." – Journal of the Royal Statistical Society Sample Size Calculations in Clinical Research, Third Edition presents statistical procedures for performing sample size calculations during various phases of clinical research and development. A comprehensive and unified presentation of statistical concepts and practical applications, this book includes a well-balanced summary of current and emerging clinical issues, regulatory requirements, and recently developed statistical methodologies for sample size calculation. Features: Compares the relative merits and disadvantages of statistical methods for sample size calculations Explains how the formulae and procedures for sample size calculations can be used in a variety of clinical research and development stages Presents real-world examples from several therapeutic areas, including cardiovascular medicine, the central nervous system, anti-infective medicine, oncology, and women’s health Provides sample size calculations for dose response studies, microarray studies, and Bayesian approaches This new edition is updated throughout, includes many new sections, and five new chapters on emerging topics: two stage seamless adaptive designs, cluster randomized trial design, zero-inflated Poisson distribution, clinical trials with extremely low incidence rates, and clinical trial simulation.

Download or read book Sample Size Tables for Clinical Studies written by David Machin and published by John Wiley & Sons. This book was released on 2011-08-26 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides statisticians and researchers with the statistical tools - equations, formulae and numerical tables - to design and plan clinical studies and carry out accurate, reliable and reproducible analysis of the data so obtained. There is no way around this as incorrect procedure in clinical studies means that the researcher's paper will not be accepted by a peer-reviewed journal. Planning and analysing clinical studies is a very complicated business and this book provides indispensible factual information. Please go to http://booksupport.wiley.com and enter 9781405146500 to easily download the supporting materials.

Download or read book Multivariate Data Analysis written by Joseph Hair and published by Pearson Higher Ed. This book was released on 2016-08-18 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the eBook of the printed book and may not include any media, website access codes, or print supplements that may come packaged with the bound book. For graduate and upper-level undergraduate marketing research courses. For over 30 years, Multivariate Data Analysis has provided readers with the information they need to understand and apply multivariate data analysis. Hair et. al provides an applications-oriented introduction to multivariate analysis for the non-statistician. By reducing heavy statistical research into fundamental concepts, the text explains to readers how to understand and make use of the results of specific statistical techniques. In this Seventh Edition, the organization of the chapters has been greatly simplified. New chapters have been added on structural equations modeling, and all sections have been updated to reflect advances in technology, capability, and mathematical techniques.

Download or read book Common Errors in Statistics and How to Avoid Them written by Phillip I. Good and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the Second Edition "All statistics students and teachers will find in this book a friendly and intelligentguide to . . . applied statistics in practice." —Journal of Applied Statistics ". . . a very engaging and valuable book for all who use statistics in any setting." —CHOICE ". . . a concise guide to the basics of statistics, replete with examples . . . a valuablereference for more advanced statisticians as well." —MAA Reviews Now in its Third Edition, the highly readable Common Errors in Statistics (and How to Avoid Them) continues to serve as a thorough and straightforward discussion of basic statistical methods, presentations, approaches, and modeling techniques. Further enriched with new examples and counterexamples from the latest research as well as added coverage of relevant topics, this new edition of the benchmark book addresses popular mistakes often made in data collection and provides an indispensable guide to accurate statistical analysis and reporting. The authors' emphasis on careful practice, combined with a focus on the development of solutions, reveals the true value of statistics when applied correctly in any area of research. The Third Edition has been considerably expanded and revised to include: A new chapter on data quality assessment A new chapter on correlated data An expanded chapter on data analysis covering categorical and ordinal data, continuous measurements, and time-to-event data, including sections on factorial and crossover designs Revamped exercises with a stronger emphasis on solutions An extended chapter on report preparation New sections on factor analysis as well as Poisson and negative binomial regression Providing valuable, up-to-date information in the same user-friendly format as its predecessor, Common Errors in Statistics (and How to Avoid Them), Third Edition is an excellent book for students and professionals in industry, government, medicine, and the social sciences.

Download or read book How Many Subjects written by Helena Chmura Kraemer and published by SAGE. This book was released on 1987-09 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: How Many Subjects? is a practical guide to sample size calculations and general principles of cost-effective research. It introduces a simple technique of statistical power analysis which allows researchers to compute approximate sample sizes and power for a wide variety of research designs. Because the same technique is used with only slight modifications for different statistical tests, researchers can easily compare the sample sizes required by different designs and tests to make cost-effective decisions in planning a study. These comparisons, emphasized throughout the book, demonstrate important principles of design, measurement and analysis that are rarely discussed in courses or textbooks.

Download or read book Doing Meta Analysis with R written by Mathias Harrer and published by CRC Press. This book was released on 2021-09-15 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doing Meta-Analysis with R: A Hands-On Guide serves as an accessible introduction on how meta-analyses can be conducted in R. Essential steps for meta-analysis are covered, including calculation and pooling of outcome measures, forest plots, heterogeneity diagnostics, subgroup analyses, meta-regression, methods to control for publication bias, risk of bias assessments and plotting tools. Advanced but highly relevant topics such as network meta-analysis, multi-three-level meta-analyses, Bayesian meta-analysis approaches and SEM meta-analysis are also covered. A companion R package, dmetar, is introduced at the beginning of the guide. It contains data sets and several helper functions for the meta and metafor package used in the guide. The programming and statistical background covered in the book are kept at a non-expert level, making the book widely accessible. Features • Contains two introductory chapters on how to set up an R environment and do basic imports/manipulations of meta-analysis data, including exercises • Describes statistical concepts clearly and concisely before applying them in R • Includes step-by-step guidance through the coding required to perform meta-analyses, and a companion R package for the book

Download or read book Introduction to the New Statistics written by Geoff Cumming and published by Routledge. This book was released on 2016-10-04 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first introductory statistics text to use an estimation approach from the start to help readers understand effect sizes, confidence intervals (CIs), and meta-analysis (‘the new statistics’). It is also the first text to explain the new and exciting Open Science practices, which encourage replication and enhance the trustworthiness of research. In addition, the book explains NHST fully so students can understand published research. Numerous real research examples are used throughout. The book uses today’s most effective learning strategies and promotes critical thinking, comprehension, and retention, to deepen users’ understanding of statistics and modern research methods. The free ESCI (Exploratory Software for Confidence Intervals) software makes concepts visually vivid, and provides calculation and graphing facilities. The book can be used with or without ESCI. Other highlights include: - Coverage of both estimation and NHST approaches, and how to easily translate between the two. - Some exercises use ESCI to analyze data and create graphs including CIs, for best understanding of estimation methods. -Videos of the authors describing key concepts and demonstrating use of ESCI provide an engaging learning tool for traditional or flipped classrooms. -In-chapter exercises and quizzes with related commentary allow students to learn by doing, and to monitor their progress. -End-of-chapter exercises and commentary, many using real data, give practice for using the new statistics to analyze data, as well as for applying research judgment in realistic contexts. -Don’t fool yourself tips help students avoid common errors. -Red Flags highlight the meaning of "significance" and what p values actually mean. -Chapter outlines, defined key terms, sidebars of key points, and summarized take-home messages provide a study tool at exam time. -http://www.routledge.com/cw/cumming offers for students: ESCI downloads; data sets; key term flashcards; tips for using SPSS for analyzing data; and videos. For instructors it offers: tips for teaching the new statistics and Open Science; additional homework exercises; assessment items; answer keys for homework and assessment items; and downloadable text images; and PowerPoint lecture slides. Intended for introduction to statistics, data analysis, or quantitative methods courses in psychology, education, and other social and health sciences, researchers interested in understanding the new statistics will also appreciate this book. No familiarity with introductory statistics is assumed.

Download or read book Practical Tools for Designing and Weighting Survey Samples written by Richard Valliant and published by Springer Science & Business Media. This book was released on 2013-05-16 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Survey sampling is fundamentally an applied field. The goal in this book is to put an array of tools at the fingertips of practitioners by explaining approaches long used by survey statisticians, illustrating how existing software can be used to solve survey problems, and developing some specialized software where needed. This book serves at least three audiences: (1) Students seeking a more in-depth understanding of applied sampling either through a second semester-long course or by way of a supplementary reference; (2) Survey statisticians searching for practical guidance on how to apply concepts learned in theoretical or applied sampling courses; and (3) Social scientists and other survey practitioners who desire insight into the statistical thinking and steps taken to design, select, and weight random survey samples. Several survey data sets are used to illustrate how to design samples, to make estimates from complex surveys for use in optimizing the sample allocation, and to calculate weights. Realistic survey projects are used to demonstrate the challenges and provide a context for the solutions. The book covers several topics that either are not included or are dealt with in a limited way in other texts. These areas include: sample size computations for multistage designs; power calculations related to surveys; mathematical programming for sample allocation in a multi-criteria optimization setting; nuts and bolts of area probability sampling; multiphase designs; quality control of survey operations; and statistical software for survey sampling and estimation. An associated R package, PracTools, contains a number of specialized functions for sample size and other calculations. The data sets used in the book are also available in PracTools, so that the reader may replicate the examples or perform further analyses.

Download or read book Testing 1 2 3 written by Johannes Ledolter and published by Stanford University Press. This book was released on 2007 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives students, practitioners, and managers a set of practical and valuable tools for designing and analyzing experiments, emphasizing applications in marketing and service operations such as website design, direct mail campaigns, and in-store tests.