Download or read book Detection of Energetic Materials and Explosive Residues With Laser Induced Breakdown Spectroscopy 2 Stand off Measurements written by and published by . This book was released on 2007 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: We have developed a double pulse stand-off laser-induced breakdown spectroscopy (LIBS) system capable of detecting explosive residues as far as 50 m. As described in an earlier report (ARL-TR-4240), the use of a double pulse laser improves the sensitivity and selectivity of LIBS for the detection of energetic materials. This report discusses the extension of these studies to stand-off distances. The efficacy of chemometric techniques such as linear correlation, principal components analysis, and partial least squares discriminant analysis for the identification of explosive residues is also discussed. We have shown that despite the typical characterization of LIBS as an elemental technique, the relative elemental intensities in the LIBS spectra are representative of the stoichiometry of the parent molecules and can be used to discriminate materials containing the same elements.

Download or read book Detection of Energetic Materials and Explosive Residues With Laser Induced Breakdown Spectroscopy 1 Laboratory Measurements written by and published by . This book was released on 2007 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser-induced breakdown spectroscopy (LIBS) has been investigated for the detection of energetic materials. After an initial survey of explosives and propellants, key elemental and molecular emission lines in the LIBS spectra were identified. Techniques for improving the sensitivity and selectivity of LIBS for explosives detection, such as the use of an argon buffer gas and double pulse LIBS, have been investigated with laboratory and field-portable instruments. We present results demonstrating the ability of LIBS to discriminate between energetic and non-energetic materials.

Download or read book Detection of Energetic Materials and Explosive Residues with Laser induced Breakdown Spectroscopy written by and published by . This book was released on 2007 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser-induced breakdown spectroscopy (LIBS) has been investigated for the detection of energetic materials. After an initial survey of explosives and propellants, key elemental and molecular emission lines in the LIBS spectra were identified. Techniques for improving the sensitivity and selectivity of LIBS for explosives detection, such as the use of an argon buffer gas and double pulse LIBS, have been investigated with laboratory and field-portable instruments. We present results demonstrating the ability of LIBS to discriminate between energetic and non-energetic materials.

Download or read book Laser Based Optical Detection of Explosives written by Paul M. Pellegrino and published by CRC Press. This book was released on 2018-09-03 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser-Based Optical Detection of Explosives offers a comprehensive review of past, present, and emerging laser-based methods for the detection of a variety of explosives. This book: Considers laser propagation safety and explains standard test material preparation for standoff optical-based detection system evaluation Explores explosives detection using deep ultraviolet native fluorescence, Raman spectroscopy, laser-induced breakdown spectroscopy, reflectometry, and hyperspectral imaging Examines photodissociation followed by laser-induced fluorescence, photothermal methods, cavity-enhanced absorption spectrometry, and short-pulse laser-based techniques Describes the detection and recognition of explosives using terahertz-frequency spectroscopic techniques Each chapter is authored by a leading expert on the respective technology, and is structured to supply historical perspective, address current advantages and challenges, and discuss novel research and applications. Readers are left with an in-depth understanding and appreciation of each technology’s capabilities and potential for standoff hazard detection.

Download or read book Handbook of Laser Induced Breakdown Spectroscopy written by David A. Cremers and published by John Wiley & Sons. This book was released on 2013-03-15 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starting from fundamentals and moving through a thorough discussion of equipment, methods, and techniques, the Handbook of Laser-Induced Breakdown Spectroscopy provides a unique reference source that will be of value for many years to come for this important new analysis method. The authors, with a total of over 60 years of experience in the LIBS method, use a combination of tutorial discussions ranging from basic principles up to more advanced descriptions along with extensive figures and photographs to clearly explain topics addressed in the text. In this second edition, chapters on the use of statistical analysis and advances in detection of weapons of mass destruction have been added. Tables of data related to analysis with LIBS have been updated. The Handbook of Laser-Induced Breakdown Spectroscopy, Second Edition: provides a thorough but understandable discussion of the basic principles of the method based on atomic emission spectroscopy, including recently available data leading to better characterization of the LIBS plasma; presents a discussion of the many advantages of the method along with limitations, to provide the reader a balanced overview of capabilities of the method; describes LIBS instrumentation ranging from basic set-ups to more advanced configurations; presents a comprehensive discussion of the different types of components (laser, spectrometers, detectors) that can be used for LIBS apparatuses along with suggestions for their use, as well as an up-to-date treatment of the newest advances and capabilities of LIBS instruments; presents the analytical capabilities of the method in terms of detection limits, accuracy, and precision of measurements for a variety of different sample types; discusses methods of sampling different media such as gases, liquids, and solids; presents an overview of some real-world applications of the method, with new emphasis on sampling of biologically and physically dangerous materials; provides an up-to-date list of references to LIBS literature along with the latest detection limits and a unique list of element detection limits using a uniform analysis method; provides annotated examples of LIBS spectra which can serve as references for the general reader and will be especially useful for those starting out in the field.

Download or read book Laser Induced Breakdown Spectroscopy written by Jagdish P. Singh and published by Elsevier. This book was released on 2020-06-02 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser-Induced Breakdown Spectroscopy, Second Edition, covers the basic principles and latest developments in instrumentation and applications of Laser Induced Breakdown Spectroscopy (LIBS). Written by active experts in the field, it serves as a useful resource for analytical chemists and spectroscopists, as well as graduate students and researchers engaged in the fields of combustion, environmental science, and planetary and space exploration. This fully revised second edition includes several new chapters on new LIBS techniques as well as several new applications, including flame and off-gas measurement, pharmaceutical samples, defense applications, carbon sequestration and site monitoring, handheld instruments, and more. LIBS has rapidly developed into a major analytical technology with the capability of detecting all chemical elements in a sample, of real- time response, and of close-contact or stand-off analysis of targets. It does not require any sample preparation, unlike conventional spectroscopic analytical techniques. Samples in the form of solids, liquids, gels, gases, plasmas, and biological materials (like teeth, leaves, or blood) can be studied with almost equal ease. This comprehensive reference introduces the topic to readers in a simple, direct, and accessible manner for easy comprehension and maximum utility. - Covers even more applications of LIBS beyond the first edition, including combustion, soil physics, environment, and life sciences - Includes new chapters on LIBS techniques that have emerged in the last several years, including Femtosecond LIBS and Molecular LIBS - Provides inspiration for future developments in this rapidly growing field in the concluding chapter

Download or read book Laser Induced Breakdown Spectroscopy LIBS written by Vivek K. Singh and published by John Wiley & Sons. This book was released on 2023-03-14 with total page 2162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Induced Breakdown Spectroscopy (LIBS) Essential resource covering the field of LIBS, with respect to its fundamentals, established and novel applications, and future prospects Laser Induced Breakdown Spectroscopy (LIBS), presents in two comprehensive volumes a thorough discussion of the basic principles of the method, including important recently available data which can lead to a better characterization of the LIBS plasma. This extensive work contains detailed discussions on the lasers, spectrometers, and detectors that can be used for LIBS apparatuses and describes various instrumentation, ranging from basic setups to more advanced configurations. As a modern resource, the work includes the newest advances and capabilities of LIBS instruments, featuring the recent developments of Dual-Pulse LIBS, Femtosecond LIBS, and Micro-LIBS as well as their applications. Throughout, the contributions discuss the analytical capabilities of the method in terms of detection limits, accuracy, and precision of measurements for a variety of samples. Lastly, an extensive range of applications is presented, including food technology, environmental science, nuclear reactors, nanoscience and nanotechnology, and biological and biomedical developments. Sample topics covered within the work include: iagnostics of laser induced plasma (LIP): LIBS plasma and its characteristics, factors affecting the LIBS plasma, methods of enhancing LIBS sensitivity, and LTE/non-LTE plasmas Instrumental developments in LIBS: light collection system and spectral detection systems, handheld LIBS, deep sea LIBS, and industrial sorters and analyzers Femtosecond laser ablation: laser-matter interaction, laser absorption, energy transport, ablation mechanisms and threshold, and plasma characterization Micro-analysis and LIBS imaging: microjoule laser sources, scaling libs to microjoule energies, micrometer scaling, advanced applications, and future prospects Spectroscopic and analytical scientists working with LIBS will find this wide-ranging reference immensely helpful in developing LIBS instrumentation and applications. Researchers and students in natural sciences and related programs of study will be able to use the work to acquire foundational knowledge on the method and learn about cutting-edge advancements being made in the field.

Download or read book Laser Induced Breakdown Spectroscopy for Detection of Organic Residues written by Christopher G. Brown and published by . This book was released on 2011 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Induced Breakdown Spectroscopy (LIBS) is showing great potential as an atomic analytical technique. With its ability to rapidly analyze all forms of matter, with little-to-no sample preparation, LIBS has many advantages over conventional atomic emission spectroscopy techniques. With the maturation of the technologies that make LIBS possible, there has been a growing movement to implement LIBS in portable analyzers for field applications. In particular, LIBS has long been considered the front-runner in the drive for stand-off detection of trace deposits of explosives. Thus there is a need for a better understanding of the relevant processes that are responsible for the LIBS signature and their relationships to the different system parameters that are helping to improve LIBS as a sensing technology. This study explores the use of LIBS as a method to detect random trace amounts of specific organic materials deposited on organic or non-metallic surfaces. This requirement forces the limitation of single-shot signal analysis. This study is both experimental and theoretical, with a sizeable component addressing data analysis using principal components analysis to reduce the dimensionality of the data, and quadratic discriminant analysis to classify the data. In addition, the alternative approach of 'target factor analysis' was employed to improve detection of organic residues on organic substrates. Finally, a new method of characterizing the laser-induced plasma of organics, which should lead to improved data collection and analysis, is introduced. The comparison between modeled and experimental measurements of plasma temperatures and electronic density is discussed in order to improve the present models of low-temperature laser induced plasmas.

Download or read book Comprehensive Sampling and Sample Preparation written by Josep M. Bayona and published by Academic Press. This book was released on 2012-12-31 with total page 2998 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Sampling and Sample Preparation is a complete treatment of the theory and methodology of sampling in all physical phases and the theory of sample preparation for all major extraction techniques. It is the perfect starting point for researchers and students to design and implement their experiments and support those experiments with quality-reviewed background information. In its four volumes, fundamentals of sampling and sample preparation are reinforced through broad and detailed sections dealing with Biological and Medical, Environmental and Forensic, and Food and Beverage applications. The contributions are organized to reflect the way in which analytical chemists approach a problem. It is intended for a broad audience of analytical chemists, both educators and practitioners of the art and can assist in the preparation of courses as well in the selection of sampling and sample preparation techniques to address the challenges at hand. Above all, it is designed to be helpful in learning more about these topics, as well as to encourage an interest in sampling and sample preparation by outlining the present practice of the technology and by indicating research opportunities. Sampling and Sample preparation is a large and well-defined field in Analytical Chemistry, relevant for many application areas such as medicine, environmental science, biochemistry, pharmacology, geology, and food science. This work covers all these aspects and will be extremely useful to researchers and students, who can use it as a starting point to design and implement their experiments and for quality-reviewed background information There are limited resources that Educators can use to effectively teach the fundamental aspects of modern sample preparation technology. Comprehensive Sampling and Sample Preparation addresses this need, but focuses on the common principles of new developments in extraction technologies rather than the differences between techniques thus facilitating a more thorough understanding Provides a complete overview of the field. Not only will help to save time, it will also help to make correct assessments and avoid costly mistakes in sampling in the process Sample and sample preparation are integral parts of the analytical process but are often less considered and sometimes even completely disregarded in the available literature. To fill this gap, leading scientists have contributed 130 chapters, organized in 4 volumes, covering all modern aspects of sampling and liquid, solid phase and membrane extractions, as well as the challenges associated with different types of matrices in relevant application areas

Download or read book Laser Induced Breakdown Spectroscopy written by Sergio Musazzi and published by Springer. This book was released on 2014-07-08 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the Laser-Induced Breakdown Spectroscopy (LIBS) a widely used atomic emission spectroscopy technique for elemental analysis of materials. It is based on the use of a high-power, short pulse laser excitation. The book is divided into two main sections: the first one concerning theoretical aspects of the technique, the second one describing the state of the art in applications of the technique in different scientific/technological areas. Numerous examples of state of the art applications provide the readers an almost complete scenario of the LIBS technique. The LIBS theoretical aspects are reviewed. The book helps the readers who are less familiar with the technique to understand the basic principles. Numerous examples of state of the art applications give an almost complete scenario of the LIBS technique potentiality. These examples of applications may have a strong impact on future industrial utilization. The authors made important contributions to the development of this field.

Download or read book Laser Induced Breakdown Spectroscopy Capabilities and Applications written by and published by . This book was released on 2010 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work provides a review of the capabilities and applications of laser-induced breakdown spectroscopy (LIBS) at the U.S. Army Research Laboratory (ARL). By coupling advances in LIBS hardware and analysis software, ARL has expanded the capabilities of LIBS significantly. LIBS uses a focused, pulsed laser to ablate a target material, generating a transient microplasma which emits light characteristic of the sample composition. It is a real-time sensor technology which requires no sample preparation and provides universal materials detection for solids, liquids, and aerosols. Applications investigated at ARL in recent years include the standoff detection of explosive residues and other hazardous materials, plastic landmine discrimination, and material characterization of various metal alloys and polymers.

Download or read book Encyclopedia of Spectroscopy and Spectrometry written by and published by Academic Press. This book was released on 2016-09-22 with total page 3716 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of the Encyclopedia of Spectroscopy and Spectrometry, Three Volume Set provides authoritative and comprehensive coverage of all aspects of spectroscopy and closely related subjects that use the same fundamental principles, including mass spectrometry, imaging techniques and applications. It includes the history, theoretical background, details of instrumentation and technology, and current applications of the key areas of spectroscopy. The new edition will include over 80 new articles across the field. These will complement those from the previous edition, which have been brought up-to-date to reflect the latest trends in the field. Coverage in the third edition includes: Atomic spectroscopy Electronic spectroscopy Fundamentals in spectroscopy High-Energy spectroscopy Magnetic resonance Mass spectrometry Spatially-resolved spectroscopic analysis Vibrational, rotational and Raman spectroscopies The new edition is aimed at professional scientists seeking to familiarize themselves with particular topics quickly and easily. This major reference work continues to be clear and accessible and focus on the fundamental principles, techniques and applications of spectroscopy and spectrometry. Incorporates more than 150 color figures, 5,000 references, and 300 articles for a thorough examination of the field Highlights new research and promotes innovation in applied areas ranging from food science and forensics to biomedicine and health Presents a one-stop resource for quick access to answers and an in-depth examination of topics in the spectroscopy and spectrometry arenas

Download or read book Laser Induced Breakdown Spectroscopy written by Andrzej W. Miziolek and published by Cambridge University Press. This book was released on 2006-09-07 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a comprehensive reference explaining the fundamentals of the LIBS phenomenon, its history and its fascinating applications across eighteen chapters written by recognized leaders in the field. This book will be of significant interest to researchers in chemical and materials analysis within academia and industry.

Download or read book Functional Nanostructures and Sensors for CBRN Defence and Environmental Safety and Security written by Anatolie Sidorenko and published by Springer Nature. This book was released on 2020-03-17 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last decade, techniques for materials preparation and processing at nanometer scale have advanced rapidly, leading to the introduction of novel principles for a new generation of sensors and detectors. At the same time, the chemical industry, transport and agriculture produce huge amounts of dangerous waste gases and liquids, leading to soil, air and water contamination. One more modern threat - international terrorism - demands that scientists make efforts to apply new principles and technologies to protect society against chemical, biological, radiological and nuclear (CBRN) attacks and to develop novel effective technologies for the remediation of large contaminated areas. Accordingly, the main goal of this book is to bring together experts (theorists, experimentalists, engineers and technologists) for an extensive discussion covering: novel principles for functional nanostructures and detector fabrication and implementation, the development of novel technologies for the deactivation of CBRN agents, their experimental realization and their application in novel monitoring and control systems, and technological processes for soil and water remediation, with a view to environmental protection and defence against CBRN-based terrorism. In keeping with the book’s main goal, the following topics are highlighted and discussed: - Sensors and detectors - detection of chemicals, principles of “artificial nose” and chemical “micro-lab on a chip” design, surface and underground water quality monitoring systems, molecular electronics, superconducting electronic devices, quantum detectors and Qubits. - Environmental protection and CBRN - detection of infrared, microwave, X-ray and terahertz radiation. Principles for novel IR-, UV-, and Terahertz-wave devices for the detection of low-contrast objects. - Novel technological processes for CBRN destruction and deactivation. All these topics are strongly interrelated, both with regard to fundamental aspects and to fabrication and implementation technologies; in addition, they are highly promising for application in novel functional devices, computer logics, sensing and detection of low-concentration chemicals, weak and extremely weak magnetic and microwave fields, infrared and ultraviolet radiation. Given its scope, the book will be a useful and interesting guide for a broad readership of engineers, scientists, PhD students and experts in the area of defence against environmental terrorism.

Download or read book Laser Induced Breakdown Spectroscopy written by Reinhard Noll and published by Springer Science & Business Media. This book was released on 2012-01-14 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive source of the fundamentals, process parameters, instrumental components and applications of laser-induced breakdown spectroscopy (LIBS). The effect of multiple pulses on material ablation, plasma dynamics and plasma emission is presented. A heuristic plasma modeling allows to simulate complex experimental plasma spectra. These methods and findings form the basis for a variety of applications to perform quantitative multi-element analysis with LIBS. These application potentials of LIBS have really boosted in the last years ranging from bulk analysis of metallic alloys and non-conducting materials, via spatially resolved analysis and depth profiling covering measuring objects in all physical states: gaseous, liquid and solid. Dedicated chapters present LIBS investigations for these tasks with special emphasis on the methodical and instrumental concepts as well as the optimization strategies for a quantitative analysis. Requirements, concepts, design and characteristic features of LIBS instruments are described covering laboratory systems, inspections systems for in-line process control, mobile systems and remote systems. State-of-the-art industrial applications of LIBS systems are presented demonstrating the benefits of inline process control for improved process guiding and quality assurance purposes.

Download or read book Laser induced Breakdown Spectrometry written by Yong-Ill Lee and published by Nova Publishers. This book was released on 2000 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: When the output from a pulsed laser is forced onto a small spot of a sample, optically induced plasma, called laser-induced plasma (LIP) is formed at the surface. The plasma is formed when the laser power density exceeds the breakdown threshold value of the surface. The plasma can be used in sampling but is proposed as a source for atomic emission spectrometry (AES). In this case the technique is referred to as laser induced breakdown (emission) spectrometry (LIBS). The spectrally and temporally resolved detection and subsequent determination of the specific atomic emission reveals analytical information about the elemental composition of the sample, including solids, liquids and gases. This book is devoted to the analytical technique of laser-induced breakdown spectrometry. An introduction covering some basic principles of atomic emission spectrometry, analytical performance characteristics, and a comparison to more conventional techniques provides background information for the reader. The book is then conveniently divided into three parts: the first part described the instrumentation required and options available, the second part on fundamental studies of the laser plasma, and the third part on applications. Finally the future development of LIBS is presented.

Download or read book Laser Spectroscopy and Laser Imaging written by Helmut H. Telle and published by CRC Press. This book was released on 2018-04-17 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: "a very valuable book for graduate students and researchers in the field of Laser Spectroscopy, which I can fully recommend" —Wolfgang Demtröder, Kaiserslautern University of Technology How would it be possible to provide a coherent picture of this field given all the techniques available today? The authors have taken on this daunting task in this impressive, groundbreaking text. Readers will benefit from the broad overview of basic concepts, focusing on practical scientific and real-life applications of laser spectroscopic analysis and imaging. Chapters follow a consistent structure, beginning with a succinct summary of key principles and concepts, followed by an overview of applications, advantages and pitfalls, and finally a brief discussion of seminal advances and current developments. The examples used in this text span physics and chemistry to environmental science, biology, and medicine. Focuses on practical use in the laboratory and real-world applications Covers the basic concepts, common experimental setups Highlights advantages and caveats of the techniques Concludes each chapter with a snapshot of cutting-edge advances This book is appropriate for anyone in the physical sciences, biology, or medicine looking for an introduction to laser spectroscopic and imaging methodologies. Helmut H. Telle is a full professor at the Instituto Pluridisciplinar, Universidad Complutense de Madrid, Spain. Ángel González Ureña is head of the Department of Molecular Beams and Lasers, Instituto Pluridisciplinar, Universidad Complutense de Madrid, Spain.