Download or read book Innovation in Wind Turbine Design written by Peter Jamieson and published by John Wiley & Sons. This book was released on 2018-03-12 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aktualisiert und erweiterte Neuauflage dieses umfassenden Leitfadens zu Innovationen in der Entwicklung von Windkraftanlagen Die 2. Auflage von Innovation in Wind Turbine Design beschäftigt sich im Detail mit den Designgrundlagen, erläutert die Entscheidungsgründe für ein bestimmtes Design und beschreibt Methoden zur Bewertung innovativer Systeme und Komponenten. Die 2. Auflage wurde wesentlich erweitert und insgesamt aktualisiert. Neue Inhalte befassen sich mit den theoretischen Grundlagen von Antriebsscheiben in Bezug auf induktionsarme Rotoren. Wesentlich erweitert wurden die Abschnitte zu Offshore-Fragen und Flugwindkraftsystemen. Aktualisierte Inhalte beziehen sich auf Antriebsstränge und die grundlegende Theorie von Planetengetrieben und Differenzialgetrieben. Die Grundlagen der Windenergie und Irrtümer hinsichtlich des Designs von Rotoren mit Luftkanälen, Labor- und Feldtests der Rotorsysteme Katru und Wind Lens werden deutlicher herausgearbeitet. LiDAR wird kurz vorgestellt, ebenso die neuesten Entwicklungen beim Multi-Rotor-Konzept, darunter das Vier-Rotor-System von Vestas. Ein neues Kapitel beschäftigt sich mit dem innovativen DeepWind VAWT. Das Buch ist in vier Hauptabschnitte gegliedert: Hintergrundinformationen zu Designs, Technologiebewertung, Designthemen und innovative Technologiebeispiele. Wichtige Merkmale: - Stark erweiterte und um neue Inhalte ergänzt. - Deckt die Designgrundlagen umfassend ab, erläutert die Entscheidungsgründe für ein bestimmtes Design und beschreibt Methoden zur Bewertung innovativer Systeme und Komponenten. - Enthält innovative Beispiele aus der Praxis. - Jetzt mit Informationen zu den neuesten Entwicklungen in dem Fachgebiet. Dieses Buch ist ein Muss für Windkraftingenieure, Energieingenieure und Turbinenentwickler, Berater, Forscher und Studenten höherer Semester.

Download or read book Wind Energy Design written by Thomas Corke and published by CRC Press. This book was released on 2018-04-27 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind Energy Systems is designed for undergraduate engineering courses, with a focus on multidisciplinary design of a wind energy system. The text covers basic wind power concepts and components - wind characteristics and modeling, rotor aerodynamics, lightweight flexible structures, wind farms, aerodynamics, wind turbine control, acoustics, energy storage, and economics. These topics are applied to produce a new conceptual wind energy design, showing the interplay of various design aspects in a complete system. An ongoing case study demonstrates the integration of various component topics, and MATLAB examples are included to show computerized design analysis procedures and techniques.

Download or read book Wind Power Generation and Wind Turbine Design written by Wei Tong and published by WIT Press. This book was released on 2010-04-30 with total page 769 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to provide engineers and researchers in both the wind power industry and energy research community with comprehensive, up-to-date, and advanced design techniques and practical approaches. The topics addressed in this book involve the major concerns in the wind power generation and wind turbine design.

Download or read book Advances in Wind Turbine Blade Design and Materials written by Povl Brondsted and published by Elsevier. This book was released on 2013-10-31 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy is gaining critical ground in the area of renewable energy, with wind energy being predicted to provide up to 8% of the world’s consumption of electricity by 2021. Advances in wind turbine blade design and materials reviews the design and functionality of wind turbine rotor blades as well as the requirements and challenges for composite materials used in both current and future designs of wind turbine blades. Part one outlines the challenges and developments in wind turbine blade design, including aerodynamic and aeroelastic design features, fatigue loads on wind turbine blades, and characteristics of wind turbine blade airfoils. Part two discusses the fatigue behavior of composite wind turbine blades, including the micromechanical modelling and fatigue life prediction of wind turbine blade composite materials, and the effects of resin and reinforcement variations on the fatigue resistance of wind turbine blades. The final part of the book describes advances in wind turbine blade materials, development and testing, including biobased composites, surface protection and coatings, structural performance testing and the design, manufacture and testing of small wind turbine blades. Advances in wind turbine blade design and materials offers a comprehensive review of the recent advances and challenges encountered in wind turbine blade materials and design, and will provide an invaluable reference for researchers and innovators in the field of wind energy production, including materials scientists and engineers, wind turbine blade manufacturers and maintenance technicians, scientists, researchers and academics. Reviews the design and functionality of wind turbine rotor blades Examines the requirements and challenges for composite materials used in both current and future designs of wind turbine blades Provides an invaluable reference for researchers and innovators in the field of wind energy production

Download or read book Small Wind Turbines written by David Wood and published by Springer. This book was released on 2011-07-18 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small Wind Turbines provides a thorough grounding in analysing, designing, building, and installing a small wind turbine. Small turbines are introduced by emphasising their differences from large ones and nearly all the analysis and design examples refer to small turbines. The accompanying software includes MATLAB® programs for power production and starting performance, as well as programs for detailed multi-objective optimisation of blade design. A spreadsheet is also given to help readers apply the simple load model of the IEC standard for small wind turbine safety. Small Wind Turbines represents the distilled outcome of over twenty years experience in fundamental research, design and installation, and field testing of small wind turbines. Small Wind Turbines is a suitable reference for student projects and detailed design studies, and also provides important background material for engineers and others using small wind turbines for remote power and distributed generation applications.

Download or read book Fundamentals of Wind Farm Aerodynamic Layout Design written by Farschad Torabi and published by Academic Press. This book was released on 2022-01-20 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Wind Farm Aerodynamic Layout Design, Volume Four provides readers with effective wind farm design and layout guidance through algorithm optimization, going beyond other references and general approaches in literature. Focusing on interactions of wake models, designers can combine numerical schemes presented in this book which also considers wake models’ effects and problems on layout optimization in order to simulate and enhance wind farm designs. Covering the aerodynamic modeling and simulation of wind farms, the book's authors include experimental tests supporting modeling simulations and tutorials on the simulation of wind turbines. In addition, the book includes a CFD technique designed to be more computationally efficient than currently available techniques, making this book ideal for industrial engineers in the wind industry who need to produce an accurate simulation within limited timeframes. Features novel CFD modeling Offers global case studies for turbine wind farm layouts Includes tutorials on simulation of wind turbine using OpenFoam

Download or read book Design of Foundations for Offshore Wind Turbines written by Subhamoy Bhattacharya and published by John Wiley & Sons. This book was released on 2019-04-29 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive reference covering the design of foundations for offshore wind turbines As the demand for “green” energy increases the offshore wind power industry is expanding at a rapid pace around the world. Design of Foundations for Offshore Wind Turbines is a comprehensive reference which covers the design of foundations for offshore wind turbines, and includes examples and case studies. It provides an overview of a wind farm and a wind turbine structure, and examines the different types of loads on the offshore wind turbine structure. Foundation design considerations and the necessary calculations are also covered. The geotechnical site investigation and soil behavior/soil structure interaction are discussed, and the final chapter takes a case study of a wind turbine and demonstrates how to carry out step by step calculations. Key features: New, important subject to the industry. Includes calculations and case studies. Accompanied by a website hosting software and data files. Design of Foundations for Offshore Wind Turbines is a must have reference for engineers within the renewable energy industry and is also a useful guide for graduate students in this area.

Download or read book Wind Energy Explained written by James F. Manwell and published by John Wiley & Sons. This book was released on 2010-09-14 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy’s bestselling textbook- fully revised. This must-have second edition includes up-to-date data, diagrams, illustrations and thorough new material on: the fundamentals of wind turbine aerodynamics; wind turbine testing and modelling; wind turbine design standards; offshore wind energy; special purpose applications, such as energy storage and fuel production. Fifty additional homework problems and a new appendix on data processing make this comprehensive edition perfect for engineering students. This book offers a complete examination of one of the most promising sources of renewable energy and is a great introduction to this cross-disciplinary field for practising engineers. “provides a wealth of information and is an excellent reference book for people interested in the subject of wind energy.” (IEEE Power & Energy Magazine, November/December 2003) “deserves a place in the library of every university and college where renewable energy is taught.” (The International Journal of Electrical Engineering Education, Vol.41, No.2 April 2004) “a very comprehensive and well-organized treatment of the current status of wind power.” (Choice, Vol. 40, No. 4, December 2002)

Download or read book Wind Turbine Engineering Design written by David Eggleston and published by Springer. This book was released on 1987-07-31 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Small Wind Turbines for Electricity and Irrigation written by Mario Alejandro Rosato and published by CRC Press. This book was released on 2018-06-27 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical book deals with the technology of small-power wind turbines as opposed to widely diffused industrial wind turbines and wind farms. It covers the most common wind turbine technologies in the small power segment: horizontal axis both for electrical generation and water pumping, vertical axis of the Darrieus type, and vertical axis of the Savonius type. With each chapter following the same didactic scheme—a theoretical explanation and practical examples showing calculation procedures—it allows anybody with basic technical knowledge to design and build a small wind turbine for any site. A set of simple spreadsheets is available for download, each providing further examples of how to solve specific design problems and allowing the reader to play with changing parameters and see what-if. This simple trial-and-error learning process allows beginners to develop the feeling of the orders of magnitude involved in the design of a small wind power system, its potential advantages on other alternative solutions, and its limitations under some special circumstances.

Download or read book Aerodynamics of Wind Turbines written by Sven Schmitz and published by John Wiley & Sons. This book was released on 2020-01-28 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: A review of the aerodynamics, design and analysis, and optimization of wind turbines, combined with the author’s unique software Aerodynamics of Wind Turbines is a comprehensive introduction to the aerodynamics, scaled design and analysis, and optimization of horizontal-axis wind turbines. The author –a noted expert on the topic – reviews the fundamentals and basic physics of wind turbines operating in the atmospheric boundary layer. He then explores more complex models that help in the aerodynamic analysis and design of turbine models. The text contains unique chapters on blade element momentum theory, airfoil aerodynamics, rotational augmentation, vortex-wake methods, actuator-line modeling, and designing aerodynamically scaled turbines for model-scale experiments. The author clearly demonstrates how effective analysis and design principles can be used in a wide variety of applications and operating conditions. The book integrates the easy-to-use, hands-on XTurb design and analysis software that is available on a companion website for facilitating individual analyses and future studies. This component enhances the learning experience and helps with a deeper and more complete understanding of the subject matter. This important book: Covers aerodynamics, design and analysis and optimization of wind turbines Offers the author’s XTurb design and analysis software that is available on a companion website for individual analyses and future studies Includes unique chapters on blade element momentum theory, airfoil aerodynamics, rotational augmentation, vortex-wake methods, actuator-line modeling, and designing aerodynamically scaled turbines for model-scale experiments Demonstrates how design principles can be applied to a variety of applications and operating conditions Written for senior undergraduate and graduate students in wind energy as well as practicing engineers and scientists, Aerodynamics of Wind Turbines is an authoritative text that offers a guide to the fundamental principles, design and analysis of wind turbines.

Download or read book Wind Turbine Design Simplified Aerodynamics written by Paul Gay and published by Lulu.com. This book was released on 2020-04-07 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on wind turbine aerodynamics is the first book in a series of books on wind power by the author. The books are an attempt to present a simplified explanation of wind power technology without sacrificing an in-depth understanding of the subject matter.

Download or read book Wind Turbine Design written by Ion Paraschivoiu and published by Presses inter Polytechnique. This book was released on 2002 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The depletion of global fossil fuel reserves combined with mounting environmental concerns has served to focus attention on the development of ecologically compatible and renewable alternative sources of energy. Wind energy, with its impressive growth rate of 40% over the last five years, is the fastest growing alternate source of energy in the world since its purely economic potential is complemented by its great positive environmental impact. The wind turbine, whether it may be a Horizontal Axis Wind Turbine (HAWT) or a Vertical Axis Wind Turbine (VAWT), offers a practical way to convert the wind energy into electrical or mechanical energy. Although this book focuses on the aerodynamic design and performance of VAWTs based on the Darrieus concept, it also discusses the comparison between HAWTs and VAWTs, future trends in design and the inherent socio-economic and environmental friendly aspects of wind energy as an alternate source of energy.

Download or read book Wind Turbine Technology written by Muyiwa Adaramola and published by CRC Press. This book was released on 2014-02-24 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title includes a number of Open Access chapters. This important book presents a selection of new research on wind turbine technology, including aerodynamics, generators and gear systems, towers and foundations, control systems, and environmental issues. This informative book: • Introduces the principles of wind turbine design • Presents methods for analysis of wind turbine performance • Discusses approaches for wind turbine improvement and optimization • Covers fault detection in wind turbines • Describes mediating the adverse effects of wind turbine use and installation

Download or read book Advances in Wind Turbine Blade Design and Materials written by Povl Brondsted and published by Woodhead Publishing. This book was released on 2023-01-14 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Wind Turbine Blade Design and Materials, Second Edition, builds on the thorough review of the design and functionality of wind turbine rotor blades and the requirements and challenges for composite materials used in both current and future designs of wind turbine blades. Reviews the design and functionality of wind turbine rotor blades Examines the requirements and challenges for composite materials used in both current and future designs of wind turbine blades Provides an invaluable reference for researchers and innovators in the field of wind

Download or read book Wind Energy Systems written by Mario Garcia-Sanz and published by CRC Press. This book was released on 2012-02-02 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the latest developments in the field, Wind Energy Systems: Control Engineering Design offers a novel take on advanced control engineering design techniques for wind turbine applications. The book introduces concurrent quantitative engineering techniques for the design of highly efficient and reliable controllers, which can be used to solve the most critical problems of multi-megawatt wind energy systems. This book is based on the authors’ experience during the last two decades designing commercial multi-megawatt wind turbines and control systems for industry leaders, including NASA and the European Space Agency. This work is their response to the urgent need for a truly reliable concurrent engineering methodology for the design of advanced control systems. Outlining a roadmap for such a coordinated architecture, the authors consider the links between all aspects of a multi-megawatt wind energy project, in which the wind turbine and the control system must be cooperatively designed to achieve an optimized, reliable, and successful system. Look inside for information about the QFT Control Toolbox for Matlab, the software developed by the author to facilitate the QFT robust control design (see also the link at codypower.com). The textbook’s big-picture insights can help students and practicing engineers control and optimize a wind energy system, in which large, flexible, aerodynamic structures are connected to a demanding variable electrical grid and work automatically under very turbulent and unpredictable environmental conditions. The book covers topics including robust QFT control, aerodynamics, mechanical and electrical dynamic modeling, economics, reliability, and efficiency. It also addresses standards, certification, implementation, grid integration, and power quality, as well as environmental and maintenance issues. To reinforce understanding, the authors present real examples of experimentation with commercial multi-megawatt direct-drive wind turbines, as well as on-shore, offshore, floating, and airborne wind turbine applications. They also offer a unique in-depth exploration of the quantitative feedback theory (QFT)—a proven, successful robust control technique for real-world applications—as well as advanced switching control techniques that help engineers exceed classical linear limitations.

Download or read book Wind Turbine Control Systems written by Fernando D. Bianchi and published by Springer Science & Business Media. This book was released on 2006-09-07 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book emphasizes the application of Linear Parameter Varying (LPV) gain scheduling techniques to the control of wind energy conversion systems. This reformulation of the classical problem of gain scheduling allows straightforward design procedure and simple controller implementation. From an overview of basic wind energy conversion, to analysis of common control strategies, to design details for LPV gain-scheduled controllers for both fixed- and variable-pitch, this is a thorough and informative monograph.