Download or read book Designers Guide to EN 1998 1 and EN 1998 5 written by Michael N. Fardis and published by . This book was released on 2005 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series of Designers Guides to the Eurocodes provides comprehensive guidance in the form of design aids, indications for the most convenient design procedures and worked examples. All of the individual guides work in conjunction with the Designers' Guide to EN1990 Eurocode: Basis of Structural Design.
Download or read book Designer s Guide to EN 1998 1 and 1998 5 written by Michael N Fardis and published by Thomas Telford Limited. This book was released on 2005-09-28 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers EN1998-1 (General Rules, seismic actions and rules for buildings) and EN1998-5 (Foundations, retaining structures, geotechnical aspects). This book is useful for Civil and Structural Engineers, Code-drafting committees, Clients, Structural Design students, and Public authorities.
Download or read book Designers Guide to en 1998 1 and 1998 5 written by Michael N. Fardis and published by . This book was released on 2005 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of the Designers Guides to the Eurocodes series, this title covers various aspects of seismic design - general rules, seismic actions and rules for buildings. It also includes background information to aid the designer in understanding the reasoning behind and the objectives of the code.
Download or read book Designers Guide to EN 1992 1 1 Eurocode 2 Design of Concrete Structures written by Andrew W Beeby and published by Thomas Telford. This book was released on 2005-09-30 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applies to the design of building and civil engineering structures in plain, reinforced and pre-stressed concrete. The code (for convenience referred to as EC2) is written in several parts: EN 1992 - 1 - 1; EN 1992 - 1 - 2; EN 1992 - 2; and EN 1992 - 3.
Download or read book Designers Guide to Eurocode 8 written by Basil Kolias and published by Inst of Civil Engineers Pub. This book was released on 2012 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide focuses specifically on EN 1998-2 (Eurocode 8. Part 2 Bridges), the design standard for use in the seismic design of bridges in which horizontal seismic actions are mainly resisted through bending of the piers or at the abutments; however it can also be applied to the seismic design of cable-stayed and arched bridges.
Download or read book Designers Guide to EN 1991 1 2 EN 1992 1 2 EN 1993 1 2 and EN 1994 1 2 written by Tom Lennon and published by Thomas Telford. This book was released on 2007-01-12 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to 4 documents, EN1991 Part 1.2, EN1992 Part 1.2, EN1993 Part 1.2 and EN1994 Part 1.2. It provides an introduction to the procedures required to achieve design solutions for a typical range of structural elements and assemblies. Worked examples are included to illustrate the use of the Eurocodes for specific design scenarios.
Download or read book Designers Guide to EN 1992 2 Eurocode 2 Design of Concrete Structures Part 2 Concrete Bridges written by Chris R Hendy and published by Thomas Telford. This book was released on 2007-01-08 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation - Basis of design - Materials - Durability - Structural analysis - Ultimate limit states - Serviceability limit states - Detailing of reinforcement and prestressing tendons - Detailing for members and particular rules - Additional rules for precast concrete structures - Design for the execution stages.
Download or read book Designers Guide to Eurocode 4 Design of Composite Structures EN 1994 2 written by Chris R Hendy and published by Thomas Telford. This book was released on 2006-08-23 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides guidance on the interpretation and use of EN 1994-2 and presents worked examples. This book deals with the issues that are encountered in typical steel and concrete composite bridge designs, and explains the relationships between EN 1994-1-1, EN 1994-2 and the other Eurocodes.
Download or read book Seismic Design Assessment and Retrofitting of Concrete Buildings written by Michael N. Fardis and published by Springer Science & Business Media. This book was released on 2009-07-25 with total page 757 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the historic first European seismic code, this professional book focuses on seismic design, assessment and retrofitting of concrete buildings, with thorough reference to, and application of, EN-Eurocode 8. Following the publication of EN-Eurocode 8 in 2004-05, 30 countries are now introducing this European standard for seismic design, for application in parallel with existing national standards (till March 2010) and exclusively after that. Eurocode 8 is also expected to influence standards in countries outside Europe, or at the least, to be applied there for important facilities. Owing to the increasing awareness of the threat posed by existing buildings substandard and deficient buildings and the lack of national or international standards for assessment and retrofitting, its impact in that field is expected to be major. Written by the lead person in the development of the EN-Eurocode 8, the present handbook explains the principles and rationale of seismic design according to modern codes and provides thorough guidance for the conceptual seismic design of concrete buildings and their foundations. It examines the experimental behaviour of concrete members under cyclic loading and modelling for design and analysis purposes; it develops the essentials of linear or nonlinear seismic analysis for the purposes of design, assessment and retrofitting (especially using Eurocode 8); and gives detailed guidance for modelling concrete buildings at the member and at the system level. Moreover, readers gain access to overviews of provisions of Eurocode 8, plus an understanding for them on the basis of the simple models of the element behaviour presented in the book. Also examined are the modern trends in performance- and displacement-based seismic assessment of existing buildings, comparing the relevant provisions of Eurocode 8 with those of new US prestandards, and details of the most common and popular seismic retrofitting techniques for concrete buildings and guidance for retrofitting strategies at the system level. Comprehensive walk-through examples of detailed design elucidate the application of Eurocode 8 to common situations in practical design. Examples and case studies of seismic assessment and retrofitting of a few real buildings are also presented. From the reviews: "This is a massive book that has no equal in the published literature, as far as the reviewer knows. It is dense and comprehensive and leaves nothing to chance. It is certainly taxing on the reader and the potential user, but without it, use of Eurocode 8 will be that much more difficult. In short, this is a must-read book for researchers and practitioners in Europe, and of use to readers outside of Europe too. This book will remain an indispensable backup to Eurocode 8 and its existing Designers’ Guide to EN 1998-1 and EN 1998-5 (published in 2005), for many years to come. Congratulations to the author for a very well planned scope and contents, and for a flawless execution of the plan". AMR S. ELNASHAI "The book is an impressive source of information to understand the response of reinforced concrete buildings under seismic loads with the ultimate goal of presenting and explaining the state of the art of seismic design. Underlying the contents of the book is the in-depth knowledge of the author in this field and in particular his extremely important contribution to the development of the European Design Standard EN 1998 - Eurocode 8: Design of structures for earthquake resistance. However, although Eurocode 8 is at the core of the book, many comparisons are made to other design practices, namely from the US and from Japan, thus enriching the contents and interest of the book". EDUARDO C. CARVALHO
Download or read book Designer s Guide to EN 1990 written by H. Gulvanessian and published by Thomas Telford. This book was released on 2002 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: - General - Requirements - Principles of limit state design - Basic variables - Structural analysis and design assisted by testing - Verification by the partial factor method - Annex A1 (normative) - Application for buildings - Management of structural reliability for construction works - Basis for partial factor design and reliability analysis - Design assisted by testing - Appendix A: The Construction Products Directive (89/106/EEC) - Appendix B: The Eurocode Suite - Appendix C: Basic statistical terms and techniques - Appendix D: National standard organizations
Download or read book Critical comparison of major seismic codes for buildings written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2013-01-01 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 69 illustrates and compares major buildings seismic codes applied in the different Continents, namely U.S., Japan, New Zealand, Europe, Canada, Chile and Mexico. Bulletin 69 was prepared by Task Group 7.6 of fib Commission 7, under the leadership of the late Professor Robert (Bob) Park which, in tandem with Professor Paulay, had developed in the seventies new fundamental design concepts, most notably capacity design approach and structural design for ductility, that had made the NZ seismic Code the most advanced one of the time. This new approach has highly influenced the development of Eurocode 8, to which Bob Park has significantly contributed. Bob Park was also well informed of the situation in Japan, USA, Canada and South America. Such a wide view is reflected in Bulletin 69 showing similarities and differences among the major seismic codes, accompanied as far as possible by comments, hopefully useful for fostering international harmonization. A comprehensive summary of the major codes is provided in the first chapter of the bulletin. All codes are separately presented according to a common framework: an introduction section, which describes the history, the philosophy, the process development, the performance-based criteria, the strength of materials and the incorporation of strength reduction factors of each code; a second section devoted to the demand side, which specify the seismic design actions and associated criteria of each code for areas of different seismicity and for structures with different ductility properties/requirements; a third section devoted to the capacity side, which describes the capacities of members and joints and associated criteria of each code, including member strengths in flexure, shear and bars anchorage, desirable hierarchies of strength attainment, deformation capacities of mechanisms of inelastic deformation, detailing of beams, columns and structural walls, detailing of beam-column joints for shear and the detailing of diaphragms. The second chapter is devoted to the comparison of the more significant issues dealt in the considered codes. This includes: seismic design actions and associated criteria, capacity design practice, beams, columns, confinement, structural walls and joints. It is felt that fib Bulletin 69 represents a useful, unique instrument for rapidly gaining an overview of the distinguishing features of the major world codes, under both their conceptual framework and application rules.
Download or read book Web Site Usability written by Jared M. Spool and published by Morgan Kaufmann. This book was released on 1999 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on data collected from research conducted at UIE (User Interface Engineering), this book describes how well or poorly some information-rich Web sites performed when real users attempted to find specific answers.
Download or read book The Designer s Guide to VHDL written by Peter J. Ashenden and published by Morgan Kaufmann. This book was released on 2010-10-07 with total page 933 pages. Available in PDF, EPUB and Kindle. Book excerpt: VHDL, the IEEE standard hardware description language for describing digital electronic systems, has recently been revised. The Designer's Guide to VHDL has become a standard in the industry for learning the features of VHDL and using it to verify hardware designs. This third edition is the first comprehensive book on the market to address the new features of VHDL-2008. First comprehensive book on VHDL to incorporate all new features of VHDL-2008, the latest release of the VHDL standard Helps readers get up to speed quickly with new features of the new standard Presents a structured guide to the modeling facilities offered by VHDL Shows how VHDL functions to help design digital systems Includes extensive case studies and source code used to develop testbenches and case study examples Helps readers gain maximum facility with VHDL for design of digital systems
Download or read book A Designer s Research Manual written by Jennifer Visocky O'Grady and published by Rockport Publishers. This book was released on 2009-02-01 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doing research can make all the difference between a great design and a good design. By engaging in competitive intelligence, customer profiling, color and trend forecasting, etc., designers are able to bring something to the table that reflects a commercial value for the client beyond a well-crafted logo or brochure. Although scientific and analytical in nature, research is the basis of all good design work. This book provides a comprehensive manual for designers on what design research is, why it is necessary, how to do research, and how to apply it to design work.
Download or read book Designers Guide to EN 1991 1 4 written by Nicholas John Cook and published by Thomas Telford Publishing. This book was released on 2007 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text aims to provide the user with a commentary on the interpretation and use of EN 1991, Eurocode 1: Actions on structures - General actions - Part 1-4: Wind actions. This title also includes a commentary on the changes introduced in the UK National Annex.
Download or read book Designers Guide to Eurocode 7 Geotechnical Design written by Roger Frank and published by Thomas Telford. This book was released on 2004-11-22 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes and explains the many features of ground engineering that require special design attention to ensure safety and adequate performance. It is useful for civil and structural engineers code-drafting committees; clients; structural-design students and public authorities.
Download or read book Designers Guide to EN 1993 1 1 written by Leroy Gardner and published by Thomas Telford Publishing. This book was released on 2005 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;After some 25 years in preparation the key parts of EN 1993-1-1 Eurocode 3: Design of steel structures General rules and rules for buildings have now been finalised. Eurocode 3 covers many forms of steel construction and provides the most comprehensive and up-to-date set of design guidance currently available.". "Throughout, this book concentrates on the most commonly encountered aspects of structural steel design, with an emphasis on the situation in buildings. Much of its content is therefore devoted to the provisions of the Part 1.1: General rules and rules for buildings of EN 1993. This is, however, supplemented by material on loading, joints and cold-formed design. For each of the principal aspects covered, the book provides background to the structural behaviour, explanation of the codified treatment including departure from existing practice (BS 5950), and numerous worked examples. This Guide should serve as the primary point of reference for designing steel structures to Eurocode 3."--BOOK JACKET.
