Download or read book Perovskites written by Richard J. D. Tilley and published by John Wiley & Sons. This book was released on 2016-03-03 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uniquely describes both the crystallography and properties of perovskite related materials. Practical applications in solar cells, microelectronics and telecommunications Interdisciplinary topic drawing on materials science, chemistry, physics, and geology Contains problems and answers to enhance knowledge retention

Download or read book Core Level Spectroscopy of Solids written by Frank de Groot and published by CRC Press. This book was released on 2008-03-10 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Core level spectroscopy has become a powerful tool in the study of electronic states in solids. From fundamental aspects to the most recent developments, Core Level Spectroscopy of Solids presents the theoretical calculations, experimental data, and underlying physics of x-ray photoemission spectroscopy (XPS), x-ray absorption spectroscopy (XAS), x

Download or read book Transition Metal Oxides written by Chintamani Nagesa Ramachandra Rao and published by VCH Publishers. This book was released on 1995 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Frontiers in Crystalline Matter written by National Research Council and published by National Academies Press. This book was released on 2009-10-27 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: For much of the past 60 years, the U.S. research community dominated the discovery of new crystalline materials and the growth of large single crystals, placing the country at the forefront of fundamental advances in condensed-matter sciences and fueling the development of many of the new technologies at the core of U.S. economic growth. The opportunities offered by future developments in this field remain as promising as the achievements of the past. However, the past 20 years have seen a substantial deterioration in the United States' capability to pursue those opportunities at a time when several European and Asian countries have significantly increased investments in developing their own capacities in these areas. This book seeks both to set out the challenges and opportunities facing those who discover new crystalline materials and grow large crystals and to chart a way for the United States to reinvigorate its efforts and thereby return to a position of leadership in this field.

Download or read book The Chemical Bond in Inorganic Chemistry written by Ian David Brown and published by . This book was released on 2002 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the bond valence model, a description of acid-base bonding which is becoming increasingly popular particularly in fields such as materials science and mineralogy where solid state inorganic chemistry is important. Recent improvements in crystal structure determination have allowed the model to become more quantitative. Unlike other models of inorganic chemical bonding, the bond valence model is simple, intuitive, and predictive, and can be used for analysing crystal structures and the conceptual modelling of local as well as extended structures. This is the first book to explore in depth the theoretical basis of the model and to show how it can be applied to synthetic and solution chemistry. It emphasizes the separate roles of the constraints of chemistry and of three-dimensional space by analysing the chemistry of solids. Many applications of the model in physics, materials science, chemistry, mineralogy, soil science, surface science, and molecular biology are reviewed. The final chapter describes how the bond valence model relates to and represents a simplification of other models of inorganic chemical bonding.

Download or read book Transition Metal Compounds written by Daniel Khomskii and published by Cambridge University Press. This book was released on 2014-10-23 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes all aspects of the physics of transition metal compounds, providing a comprehensive overview of this diverse class of solids. Set within a modern conceptual framework, this is an invaluable, up-to-date resource for graduate students, researchers and industrial practitioners in solid-state physics and chemistry, materials science, and inorganic chemistry.

Download or read book Materials Chemistry written by Bradley D. Fahlman and published by Springer. This book was released on 2018-08-28 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of this successful textbook continues to build on the strengths that were recognized by a 2008 Textbook Excellence Award from the Text and Academic Authors Association (TAA). Materials Chemistry addresses inorganic-, organic-, and nano-based materials from a structure vs. property treatment, providing a suitable breadth and depth coverage of the rapidly evolving materials field — in a concise format. The 3rd edition offers significant updates throughout, with expanded sections on sustainability, energy storage, metal-organic frameworks, solid electrolytes, solvothermal/microwave syntheses, integrated circuits, and nanotoxicity. Most appropriate for Junior/Senior undergraduate students, as well as first-year graduate students in chemistry, physics, or engineering fields, Materials Chemistry may also serve as a valuable reference to industrial researchers. Each chapter concludes with a section that describes important materials applications, and an updated list of thought-provoking questions.

Download or read book Nanostructured Catalysts written by Susannah L. Scott and published by Springer Science & Business Media. This book was released on 2008-04-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the recent advent of nanotechnology, research and development in the area of nanostructured materials has gained unprecedented prominence. Novel materials with potentially exciting new applications are being discovered at a much higher rate than ever before. Innovative tools to fabricate, manipulate, characterize and evaluate such materials are being developed and expanded. To keep pace with this extremely rapid growth, it is necessary to take a breath from time to time, to critically assess the current knowledge and provide thoughts for future developments. This book represents one of these moments, as a number of prominent scientists in nanostructured materials join forces to provide insightful reviews of their areas of expertise, thus offering an overall picture of the state-- the art of the field. Nanostructured materials designate an increasing number of materials with designed shapes, surfaces, structures, pore systems, etc. Nanostructured materials with modified surfaces include those whose surfaces have been altered via such techniques as grafting and tethering of organic or organometallic species, or through various deposition procedures including electro, electroless and vapor deposition, or simple adsorption. These materials find important applications in catalysis, separation and environmental remediation. Materials with patterned surfaces, which are essential for the optoelectronics industry, constitute another important class of surface-modified nanostructured materials. Other materials are considered nanostructured because of their composition and internal organization.

Download or read book Chemical Vapor Transport Reactions written by Michael Binnewies and published by Walter de Gruyter. This book was released on 2012-08-31 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook covers the diverse aspects of chemical vapor transport reactions from basic research to important practical applications. The book begins with an overview of models for chemical vapor transport reactions and then proceeds to treat the specific chemical transport reactions for the elements, halides, oxides, sulfides, selenides, tellurides, pnictides, among others. Aspects of transport from intermetallic phases, the stability of gas particles, thermodynamic data, modeling software and laboratory techniques are also covered. Selected experiments using chemical vapor transport reactions round out the work, making this book a useful reference for researchers and instructors in solid state and inorganic chemistry.

Download or read book Properties of UO2 written by J. Belle and published by . This book was released on 1957 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Combinatorial Methods for Chemical and Biological Sensors written by Radislav A. Potyrailo and published by Springer Science & Business Media. This book was released on 2009-03-21 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical sensors are in high demand for applications as varied as water pollution detection, medical diagnostics, and battlefield air analysis. Designing the next generation of sensors requires an interdisciplinary approach. The book provides a critical analysis of new opportunities in sensor materials research that have been opened up with the use of combinatorial and high-throughput technologies, with emphasis on experimental techniques. For a view of component selection with a more computational perspective, readers may refer to the complementary volume of Integrated Analytical Systems edited by M. Ryan et al., entitled “Computational Methods for Sensor Material Selection”.

Download or read book Hard X ray Photoelectron Spectroscopy HAXPES written by Joseph Woicik and published by Springer. This book was released on 2015-12-26 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the first complete and up-to-date summary of the state of the art in HAXPES and motivates readers to harness its powerful capabilities in their own research. The chapters are written by experts. They include historical work, modern instrumentation, theory and applications. This book spans from physics to chemistry and materials science and engineering. In consideration of the rapid development of the technique, several chapters include highlights illustrating future opportunities as well.

Download or read book Perovskites written by Roger H. Mitchell and published by . This book was released on 2002-01-01 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metallopolymer Nanocomposites written by A.D. Pomogailo and published by Springer Science & Business Media. This book was released on 2006-01-27 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents and analyzes the essential data on nanoscale metal clusters dispersed in, or chemically bonded with polymers. Special attention is paid to the in situ synthesis of the nanocomposites, their chemical interactions, and the size and distribution of the particles in the polymer matrix. Numerous novel nanocomposites are described with regard to their mechanical, electrophysical, optical, magnetic, catalytic and biological properties. Their applications, present and future, are outlined.

Download or read book Electrochemistry of Immobilized Particles and Droplets written by Fritz Scholz and published by Springer Science & Business Media. This book was released on 2005-12-06 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Immobilizing particles or droplets on electrodes is a novel and most powerful technique for studying the electrochemical reactions of three-phase systems. It gives access to a wealth of information, ranging from quantitative and phase analysis to thermodynamic and kinetic data of electrode processes. Three-phase electrodes with immobilized droplets provide information on the electrochemistry of redox liquids and of compounds dissolved in inert organic liquids. Such measurements allow the determination of the Gibbs energies of the transfer of cations and anions between immiscible solvents, and thus make it possible to assess the hydrophobicity of ions – a property that is of great importance for pharmaceutical applications, biological studies, and for many fields of chemistry. The monograph gives, for the first time, a comprehensive overview of the results published in more than 300 papers over the last 15 years. The experiments are explained in detail, applications from many different fields are presented, and the theoretical basis of the systems is outlined.

Download or read book Electronic Structure and Physical Properties of Solids written by Hugues Dreysse and published by Springer Science & Business Media. This book was released on 2000-04-14 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: A very comprehensive book, enabling the reader to understand the basic formalisms used in electronic structure determination and particularly the "Muffin Tin Orbitals" methods. The latest developments are presented, providing a very detailed description of the "Full Potential" schemes. This book will provide a real state of the art, since almost all of the contributions on formalism have not been, and will not be, published elsewhere. This book will become a standard reference volume. Moreover, applications in very active fields of today's research on magnetism are presented. A wide spectrum of such questions is covered by this book. For instance, the paper on interlayer exchange coupling should become a "classic", since there has been fantastic experimental activity for 10 years and this can be considered to be the "final" theoretical answer to this question. This work has never been presented in such a complete form.

Download or read book Surface Organometallic Chemistry Molecular Approaches to Surface Catalysis written by Jean-Marie Basset and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface organometallic chemistry is a new field bringing together researchers from organometallic, inorganic, and surface chemistry and catalysis. Topics ranging from reaction mechanisms to catalyst preparation are considered from a molecular basis, according to which the "active site" on a catalyst surface has a supra-molecular character. This. the first book on the subject, is the outcome of a NATO Workshop held in Le Rouret. France, in May. 1986. It is our hope that the following chapters and the concluding summary of recommendations for research may help to provide a definition of surface organometallic chemistry. Besides catalysis. the central theme of the Workshop, four main topics are considered: 1) Reactions of organometallics with surfaces of metal oxides, metals. and zeolites; 2) Molecular models of surfaces, metal oxides, and metals; 3) Molecular approaches to the mechanisms of surface reactions; 4) Synthesis and modification of zeolites and related microporous solids. Most surface organometallic chemistry has been carried out on amorphous high-surf ace-area metal oxides such as silica. alumina. magnesia, and titania. The first chapter. contributed by KNOZINGER. gives a short summary of the structure and reactivity of metal oxide surfaces. Most of our understanding of these surfaces is based on acid base and redox chemistry; this chemistry has developed from X-ray and spectroscopic data, and much has been inferred from the structures and reactivities of adsorbed organic probe molecules. There are major opportunities for extending this understanding by use of well-defined (single crystal) oxide surfaces and organometallic probe molecules.