Download or read book Design of Shape Memory Alloy SMA Actuators written by Ashwin Rao and published by Springer. This book was released on 2015-05-08 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This short monograph presents an analysis and design methodology for shape memory alloy (SMA) components such as wires, beams, and springs for different applications. The solid-solid, diffusionless phase transformations in thermally responsive SMA allows them to demonstrate unique characteristics like superelasticity and shape memory effects. The combined sensing and actuating capabilities of such materials allows them to provide a system level response by combining multiple functions in a single material system. In SMA, the combined mechanical and thermal loading effects influence the functionality of such materials. The aim of this book is to make the analysis of these materials accessible to designers by developing a "strength of materials" approach to the analysis and design of such SMA components inspired from their various applications with a review of various factors influencing the design process for such materials.

Download or read book Shape Memory Microactuators written by Manfred Kohl and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overview of recent achievements, describing the microactuator development of microvalves and liner actuators comprehensively from concept through prototype. Further key aspects included are three-dimensional models for handling complex SMA actuator geometries and coupled simulation routines that take multifunctional properties into account. Mechanical and thermal optimization criteria are introduced for actuator design, allowing an optimum use of the shape memory effect. It is shown that some of the prototypes presented, e.g. SMA microgrippers, already outperform conventional components.

Download or read book position control with magnetic shape memory actuators written by Leonardo Riccardi and published by Lulu.com. This book was released on 2012-02-26 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic shape memory alloys are promising materials for several applications, such as positioning systems. This book presents the main features of those materials, and then addresses the problem of controlling magnetic shape memory positioning actuators. Two control approaches are introduced, namely a PID control and an adaptive control based on adaptive hysteresis compensation. They are able to handle the presence of hysteresis in the input-output characteristic. The adaptive approach also handles the temperature-dependent behaviour of the nonlinearity. Experimental results performed on several actuator prototypes demonstrate the effectiveness of the control approaches presented here.

Download or read book Dissertation Abstracts International written by and published by . This book was released on 2009 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Additive Manufacturing of Shape Memory Materials written by Mehrshad Mehrpouya and published by Elsevier. This book was released on 2024-10-23 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of Shape Memory Materials: Techniques, Characterization, Modeling, and Applications outlines an array of techniques and applications for additive manufacturing (AM) and the use of various shape memory materials, covering corrosion properties, material sensitivity to thermal, magnetic, and electrical effects, as well as sensitivity of shape memory properties to AM parameters, including part geometry effects and post-process treatments.Design for AM and a number of different AM methods are discussed, with materials covered including shape memory alloys, shape memory polymers, high-temperature shape memory alloys, and magnetic shape memory alloys. Characterization and modeling methods are also included, as is a chapter dedicated to real-world applications of these production techniques and materials. - Provides an overview of various shape memory materials, their additive manufacturing techniques and processes, their applications, and opportunities and challenges related to their production and use - Outlines the thermomechanical and functional properties of shape memory alloys that can be applied to their additive manufacturing processes - Covers techniques for additive manufacturing of shape memory polymers, shape memory alloys, high-temperature shape memory alloys, and magnetic shape memory alloys - Discusses characterization, post-processing, modeling, and applications of shape memory materials

Download or read book Bioinspired Actuators and Sensors written by Minoru Taya and published by Cambridge University Press. This book was released on 2016-10-13 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: From experts in engineering and biology, this is the first book to integrate sensor and actuator technology with bioinspired design.

Download or read book Design Rules for Actuators in Active Mechanical Systems written by Oriol Gomis-Bellmunt and published by Springer Science & Business Media. This book was released on 2009-10-29 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Design Rules for Actuators in Active Mechanical Systems" deals with the formulation of model-based design rules to be used in the conception of optimized mechatronic and adaptronic systems. The book addresses the comparison of different actuator classes for given applications and offers answers to the following questions: What is the relationship between actuator geometry and primary output quantities? How scalable are actuators based on the same principle? How are energetic output quantities (work and power) related to mechanical load and geometry? How should actuators be designed and sized to obtain the best performance for the chosen actuator kind, and for a given application? "Design Rules for Actuators in Active Mechanical Systems" will be of use to industry professionals, such as actuator and machine designers, as well as to researchers and students of mechanical engineering, mechatronics, and electrical engineering.

Download or read book Systems Modeling and Simulation Theory and Applications written by Doo-Kwon Baik and published by Springer Science & Business Media. This book was released on 2005-01-31 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-proceedings of the third Asian Simulation Conference, AsiaSim 2004, held in Jeju Island, Korea in October 2004. The 78 revised full papers presented together with 2 invited keynote papers were carefully reviewed and selected from 178 submissions; after the conference, the papers went through another round of revision. The papers are organized in topical sections on modeling and simulation methodology, manufacturing, aerospace simulation, military simulation, medical simulation, general applications, network simulation and modeling, e-business simulation, numerical simulation, traffic simulation, transportation, virtual reality, engineering applications, and DEVS modeling and simulation.

Download or read book Shape Memory and Superelastic Alloys written by K Yamauchi and published by Elsevier. This book was released on 2011-04-30 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape memory and superelastic alloys possess properties not present in ordinary metals meaning that they can be used for a variety of applications. Shape memory and superelastic alloys: Applications and technologies explores these applications discussing their key features and commercial performance. Readers will gain invaluable information and insight into the current and potential future applications of shape memory alloys.Part one covers the properties and processing of shape memory effect and superelasticity in alloys for practical users with chapters covering the basic characteristics of Ti-Ni-based and Ti-Nb-based shape memory and superelastic (SM/SE) alloys, the development and commercialisation of TiNi and Cu-based alloys, industrial processing and device elements, design of SMA coil springs for actuators before a final overview on the development of SM and SE applications. Part two introduces SMA application technologies with chapters investigating SMAs in electrical applications, hot-water supply, construction and housing, automobiles and railways and aerospace engineering before looking at the properties, processing and applications of Ferrous (Fe)-based SMAs. Part three focuses on the applications of superelastic alloys and explores their functions in the medical, telecommunications, clothing, sports and leisure industries. The appendix briefly describes the history and activity of the Association of Shape Memory Alloys (ASMA).With its distinguished editors and team of expert contributors, Shape memory and superelastic alloys: Applications and technologies is be a valuable reference tool for metallurgists as well as for designers, engineers and students involved in one of the many industries in which shape memory effect and superelasticity are used such as construction, automotive, medical, aerospace, telecommunications, water/heating, clothing, sports and leisure. - Explores important applications of shape memory and superelastic alloys discussing their key features and commercial performance - Assesses the properties and processing of shape memory effect and superelasticity in alloys for practical users with chapters covering the basic characteristics - Introduces SMA application technologies investigating SMAs in electrical applications, hot-water supply, construction and housing, automobiles and railways and aerospace engineering

Download or read book Scaling Issues and Design of MEMS written by Salvatore Baglio and published by John Wiley & Sons. This book was released on 2008-07-31 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible volume delivers a complete design methodology for microelectromechanical systems (MEMS). Focusing on the scaling of an autonomous micro-system, it explains the real-world problems and theoretical concepts of several different aspects inherent to the miniaturization of sensors and actuators. It reports on the analysis of dimensional scaling, the modelling, design and experimental characterization of a wide range of specific devices and applications, including: temperature microsensors based on an integrated complementary metal-oxide-semiconductor (CMOS) thermocouple; mechanical sensors; inductive microsensors for the detection of magnetic particles; electrostatic, thermal and magnetic actuators. With an original approach, this informative text encompasses the entire range of themes currently at the forefront of MEMS, including an analysis of the importantissue of energy sources in MEMS. In addition, the book explores contemporary research into the design of complete MEMS with a case study on colonies of microbots. Scaling Issues and Design of MEMS aims to improve the reader’s basic knowledge on modelling issues of complex micro devices, and to encourage new thinking about scaling effects. It will provide support for practising engineers working within the defence industry and will also be of welcome interest to graduate students and researchers with a background in electronic engineering, physics, chemistry, biology and materials science.

Download or read book Shape Memory Alloy Engineering written by Antonio Concilio and published by Elsevier. This book was released on 2014-09-25 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape Memory Alloy Engineering introduces materials, mechanical, and aerospace engineers to shape memory alloys (SMAs), providing a unique perspective that combines fundamental theory with new approaches to design and modeling of actual SMAs as compact and inexpensive actuators for use in aerospace and other applications. With this book readers will gain an understanding of the intrinsic properties of SMAs and their characteristic state diagrams, allowing them to design innovative compact actuation systems for applications from aerospace and aeronautics to ships, cars, and trucks. The book realistically discusses both the potential of these fascinating materials as well as their limitations in everyday life, and how to overcome some of those limitations in order to achieve proper design of useful SMA mechanisms. Discusses material characterization processes and results for a number of newer SMAs Incorporates numerical (FE) simulation and integration procedures into commercial codes (Msc/Nastran, Abaqus, and others) Provides detailed examples on design procedures and optimization of SMA-based actuation systems for real cases, from specs to verification lab tests on physical demonstrators One of the few SMA books to include design and set-up of demonstrator characterization tests and correlation with numerical models

Download or read book Shape Memory Alloys written by Farzad Ebrahimi and published by BoD – Books on Demand. This book was released on 2017-09-20 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a result of contributions of experts from international scientific community working in different aspects of shape memory alloys (SMAs) and reports on the state-of-the-art research and development findings on this topic through original and innovative research studies. Through its five chapters, the reader will have access to works related to ferromagnetic SMAs, while it introduces some specific applications like development of faster SMA actuators and application of nanostructural SMAs in medical devices. The book contains up-to-date publications of leading experts, and the edition is intended to furnish valuable recent information to the professionals involved in shape memory alloys analysis and applications. The text is addressed not only to researchers but also to professional engineers, students, and other experts in a variety of disciplines, both academic and industrial, seeking to gain a better understanding of what has been done in the field recently and what kind of open problems are in this area.

Download or read book Recent Advances in Material Manufacturing and Machine Learning written by Bjorn Schuller and published by CRC Press. This book was released on 2024-06-17 with total page 1923 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main aim of the 2nd international conference on recent advances in materials manufacturing and machine learning processes-2023 (RAMMML-23) is to bring together all interested academic researchers, scientists, engineers, and technocrats and provide a platform for continuous improvement of manufactur□ing, machine learning, design and materials engineering research. RAMMML 2023 received an overwhelm□ing response with more than 530 full paper submissions. After due and careful scrutiny, about 120 of them have been selected for presentation. The papers submitted have been reviewed by experts from renowned institutions, and subsequently, the authors have revised the papers, duly incorporating the suggestions of the reviewers. This has led to significant improvement in the quality of the contributions, Taylor & Francis publications, CRC Press have agreed to publish the selected proceedings of the conference in their book series of Advances in Mechanical Engineering and Interdisciplinary Sciences. This enables fast dissemina□tion of the papers worldwide and increases the scope of visibility for the research contributions of the authors.

Download or read book Thin Film Shape Memory Alloys written by Shuichi Miyazaki and published by Cambridge University Press. This book was released on 2009-09-03 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first dedicated book describing the properties, preparation, characterization and device applications of TiNi-based shape memory alloys.

Download or read book Development of Microactuators Based on the Magnetic Shape Memory Effect written by Yeduru, Srinivasa Reddy and published by KIT Scientific Publishing. This book was released on 2013-12-10 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: The giant magneto-strain effect in Ni-Mn-Ga alloys is particularly attractive for actuator applications. Two different approaches are being pursued to develop MSM microactuators. To observe large deflections of Ni-Mn-Ga microactuators, the material should be exhibiting low twinning stress and large magnetic anisotropy. In addition, design rules and boundary conditions for operating the Ni-Mn-Ga actuator material are having significant importance for evolution of performance characteristics.

Download or read book Les alliages m moire de forme written by LEXCELLENT Christian and published by Lavoisier. This book was released on 2013-04-01 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Les alliages à mémoire de forme sont des matériaux uniques qui ont la propriété de se souvenir des traitements thermomécaniques subis (traction, torsion, flexion, etc.). Ils sont très utilisés dans l'industrie biomédicale, l'aéronautique ou le nucléaire. Cet ouvrage traite de leur compréhension physique et mécanique, et de leur utilisation, en se concentrant principalement sur la nature de la transformation martensitique, expliquée à travers les théorèmes de Ball et James. Les modèles macroscopiques à variables internes donnent les clés pour le calcul des structures en alliage à mémoire de forme, particulièrement utile pour l’utilisation industrielle de ces matériaux. Professeur à l’Ecole nationale supérieure de mécanique et des microtechniques de Besançon, Christian Lexcellent mène des recherches depuis plus de 20 ans sur les alliages à mémoire de forme. Ses enseignements portent sur le comportement linéaire et non-linéaire des matériaux.

Download or read book Reliability of MEMS written by Osamu Tabata and published by John Wiley & Sons. This book was released on 2008-02-04 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book to cover exclusively and in detail the principles, tools and methods for determining the reliability of microelectromechanical materials, components and devices covers both component materials as well as entire MEMS devices. Divided into two major parts, following a general introductory chapter to reliability issues, the first part looks at the mechanical properties of the materials used in MEMS, explaining in detail the necessary measuring technologies -- nanoindenters, bulge methods, bending tests, tensile tests, and others. Part Two treats the actual devices, organized by important device categories such as pressure sensors, inertial sensors, RF MEMS, and optical MEMS.