Download or read book Design Of Intelligent Control Systems Based On Hierarchical Stochastic Automata written by Pedro Lima and published by World Scientific. This book was released on 1996-03-20 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years works done by most researchers towards building autonomous intelligent controllers frequently mention the need for a methodology of design and a measure of how successful the final result is. This monograph introduces a design methodology for intelligent controllers based on the analytic theory of intelligent machines introduced by Saridis in the 1970s. The methodology relies on the existing knowledge about designing the different sub-systems composing an intelligent machine. Its goal is to provide a performance measure applicable to any of the sub-systems, and use that measure to learn on-line the best among the set of pre-designed alternatives, given the state of the environment where the machine operates. Different designs can be compared using this novel approach.
Download or read book Design of Intelligent Control Systems Based on Hierarchical Stochastic Automata written by Pedro U. Lima and published by World Scientific. This book was released on 1996 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years works done by most researchers towards building autonomous intelligent controllers frequently mention the need for a methodology of design and a measure of how successful the final result is. This monograph introduces a design methodology for intelligent controllers based on the analytic theory of intelligent machines introduced by Saridis in the 1970s. The methodology relies on the existing knowledge about designing the different sub-systems composing an intelligent machine. Its goal is to provide a performance measure applicable to any of the sub-systems, and use that measure to learn on-line the best among the set of pre-designed alternatives, given the state of the environment where the machine operates. Different designs can be compared using this novel approach.
Download or read book Entropy In Control Engineering written by George N Saridis and published by World Scientific. This book was released on 2001-02-22 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book attempts to couple control engineering with modern developments in science, through the concept of entropy. Such disciplines as intelligent machines, economics, manufacturing, environmental systems, waste etc. can be favorably affected and their performance can be improved or their catastrophic effects minimized. Entropy is used as the unifying measure of the various, seemingly disjoint, disciplines to represent the cost of producing work that improves the standard of living, both in engineering and in science. Modeling is done through probabilistic methods, thus establishing the irreversibility of the processes involved. This is in accordance with the modern view of science. In addition, the behavior of control for an arbitrary but fixed controller away from the optimal (equilibrium) has been obtained, the analytic expression of which should lead to chaotic solutions. The control activity is explained, based on the principle that control is making a system do what we want it to do. This helps to relate control theory with the sciences.
Download or read book Advances in Intelligent Autonomous Systems written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of twenty-three timely contributions covers a well-selected repertory of topics within the autonomous systems field. The book discusses a range of design, construction, control, and operation problems along with a multiplicity of well-established and novel solutions.
Download or read book Hierarchically Intelligent Machines written by George N Saridis and published by World Scientific. This book was released on 2001-12-28 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the result of 30 years' work on the original material related to “thinking machines”, a subject initiated by the author and his colleagues. It is based on the ability of the computer to represent the hierarchical procedure of task conception and execution found in human beings. It is arranged in three levels representing the structure of organizational systems: organization, coordination and execution. Hierarchically Intelligent Machines can serve as a guide to modern intelligent robots.
Download or read book Hierarchical Sliding Mode Control for Under actuated Cranes written by Dianwei Qian and published by Springer. This book was released on 2015-10-15 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the latest developments in sliding mode overhead crane control, presenting novel research ideas and findings on sliding mode control (SMC), hierarchical SMC and compensator design-based hierarchical sliding mode. The results, which were previously scattered across various journals and conference proceedings, are now presented in a systematic and unified form. The book will be of interest to researchers, engineers and graduate students in control engineering and mechanical engineering who want to learn the methods and applications of SMC.
Download or read book RoboCup 99 Robot Soccer World Cup III written by Manuela Veloso and published by Springer. This book was released on 2003-07-31 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the third official archival publication devoted to RoboCup and documents the achievements presented at the Third Robot World Cup Soccer Games and Conferences, Robo-Cup-99, held in Stockholm, Sweden in July/August 1999. The book presents the following parts - Introductory overview and survey - Research papers of the champion teams and scientific award winners - Technical papers presented at the RoboCup-99 Workshop - Team description of a large number of participating teams. This book is mandatory reading for the rapidly growing RoboCup community as well as a valuable source or reference and inspiration for R&D professionals interested in multi-agent systems, distributed artificial intelligence, and intelligent robotics.
Download or read book Advanced Manufacturing Processes V written by Volodymyr Tonkonogyi and published by Springer Nature. This book was released on 2023-08-30 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely snapshot of innovative research and developments at the interface between design, manufacturing, materials, mechanical and process engineering, and quality assurance. It covers various manufacturing processes, such as grinding, milling, broaching, and gear machining, including additive manufacturing, vibrational-centrifugal strengthening, laser-ultrasonic surface hardening, and antifriction coatings. It focuses on computer and numerical simulation, mathematical and integrated process modeling, parametric synthesis, virtual prototyping, automatic control, design of manufacturing, mechanical and mechatronics systems. It describes innovative cutting and abrasive processes and combined technologies. It also covers the formation, strengthening, and thermomechanical rolling. It also investigates the temperature field behavior, thermal stability, wear resistance, and other processes of various materials. Gathering the best papers presented at the 5th Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2023), held on September 5–8, 2023, in Odessa, Ukraine, this book provides a comprehensive and up-to-date examination of design, manufacturing, mechanical, materials, and process engineering, as well as quality assurance trends and technologies. Yet, it also aims at fostering international and interdisciplinary communication and collaborations, offering a bridge between the academic and industrial sector.
Download or read book Advances in Design Simulation and Manufacturing IV written by Vitalii Ivanov and published by Springer Nature. This book was released on 2021-05-25 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on product design and advanced manufacturing processes, intelligent solutions for Industry 4.0, covers topics in ICT for engineering education, describes the numerical simulation and experimental studies of milling, honing, burnishing, grinding, boring, and turning, as well as the development and implementation of advanced materials. Based on the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2021), held on June 8-11, 2021, in Lviv, Ukraine, this first volume of a 2-volume set provides academics and professionals with extensive information on trends, technologies, challenges and practice-oriented experience in the above-mentioned areas.
Download or read book Graph Algebras and Automata written by Andrei Kelarev and published by CRC Press. This book was released on 2003-07-08 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graph algebras possess the capacity to relate fundamental concepts of computer science, combinatorics, graph theory, operations research, and universal algebra. They are used to identify nontrivial connections across notions, expose conceptual properties, and mediate the application of methods from one area toward questions of the other four. After
Download or read book Encyclopedia of Information Science and Technology Fourth Edition written by Khosrow-Pour, D.B.A., Mehdi and published by IGI Global. This book was released on 2017-06-20 with total page 8104 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, our world has experienced a profound shift and progression in available computing and knowledge sharing innovations. These emerging advancements have developed at a rapid pace, disseminating into and affecting numerous aspects of contemporary society. This has created a pivotal need for an innovative compendium encompassing the latest trends, concepts, and issues surrounding this relevant discipline area. During the past 15 years, the Encyclopedia of Information Science and Technology has become recognized as one of the landmark sources of the latest knowledge and discoveries in this discipline. The Encyclopedia of Information Science and Technology, Fourth Edition is a 10-volume set which includes 705 original and previously unpublished research articles covering a full range of perspectives, applications, and techniques contributed by thousands of experts and researchers from around the globe. This authoritative encyclopedia is an all-encompassing, well-established reference source that is ideally designed to disseminate the most forward-thinking and diverse research findings. With critical perspectives on the impact of information science management and new technologies in modern settings, including but not limited to computer science, education, healthcare, government, engineering, business, and natural and physical sciences, it is a pivotal and relevant source of knowledge that will benefit every professional within the field of information science and technology and is an invaluable addition to every academic and corporate library.
Download or read book Proceedings of the ASME Design Engineering Technical Conferences written by and published by . This book was released on 2005 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Expert Systems written by Cornelius T. Leondes and published by Elsevier. This book was released on 2001-09-26 with total page 2125 pages. Available in PDF, EPUB and Kindle. Book excerpt: This six-volume set presents cutting-edge advances and applications of expert systems. Because expert systems combine the expertise of engineers, computer scientists, and computer programmers, each group will benefit from buying this important reference work. An "expert system" is a knowledge-based computer system that emulates the decision-making ability of a human expert. The primary role of the expert system is to perform appropriate functions under the close supervision of the human, whose work is supported by that expert system. In the reverse, this same expert system can monitor and double check the human in the performance of a task. Human-computer interaction in our highly complex world requires the development of a wide array of expert systems. Expert systems techniques and applications are presented for a diverse array of topics including Experimental design and decision support The integration of machine learning with knowledge acquisition for the design of expert systems Process planning in design and manufacturing systems and process control applications Knowledge discovery in large-scale knowledge bases Robotic systems Geograhphic information systems Image analysis, recognition and interpretation Cellular automata methods for pattern recognition Real-time fault tolerant control systems CAD-based vision systems in pattern matching processes Financial systems Agricultural applications Medical diagnosis
Download or read book Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2005 written by American Society of Mechanical Engineers, Design Engineering Division Staff and published by . This book was released on 2005 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book RoboCup written by and published by . This book was released on 1999 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Progress in Artificial Intelligence written by Carlos Pinto-Ferreira and published by Springer Science & Business Media. This book was released on 1995-09-22 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the refereed proceedings of the 7th Portuguese Conference on Artificial Intelligence, EPIA'95, held in Funchal, Madeira Island, Portugal, in October 1995. The 30 revised full papers and the 15 poster presentations included were selected during a highly competitive selection process from a total of 167 submissions from all over the world. Among the topics covered are automated reasoning and theorem proving, belief revision, constraint-based reasoning, distributed artificial intelligence, genetic algorithms, machine learning, neural networks, non-monotonic reasoning, planning and case-based reasoning, qualitative reasoning, robotics and control, and theory of computation.
Download or read book RoboCup 2010 Robot Soccer World Cup XIV written by Javier Ruiz-del-Solar and published by Springer. This book was released on 2011-03-19 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the thoroughly refereed post-conference proceedings of the 14th RoboCup International Symposium, held in Singapore, in June, 2010 - representing the scientific tracks structured in four sessions entitled simulation and rescue robots; robot perception and localization; robot motion and humanoid robots; and human robot interaction and semantic scene analysis. The 20 revised full papers and 16 revised short papers presented were carefully reviewed and selected from 78 submissions. Documenting the research advances of the RoboCup community since the predecessor symposium, this book constitutes a valuable source of reference and inspiration for R&D professionals interested in RoboCup or in robotics and distributed AI more generally.
