Download or read book Digital Instrumentation and Control Systems in Nuclear Power Plants written by National Research Council and published by National Academies Press. This book was released on 1997-04-18 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on the development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation without introducing off-setting safety problems. This book identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. It focuses on eight areas: software quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and the adequacy of technical infrastructure.
Download or read book Instrumentation and Control Systems for Nuclear Power Plants written by Mauro Cappelli and published by Woodhead Publishing. This book was released on 2023-03-21 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation and Control Systems for Nuclear Power Plants provides the latest innovative research onthe design of effective modern I&C systems for both existing and newly commissioned plants, along withinformation on system implementation. Dr. Cappelli and his team of expert contributors cover fundamentals,explore the most advanced research in control systems technology, and tackle topics such as the human–machine interface, control room redesign, and control modeling. The inclusion of codes and standards,inspection procedures, and regulatory issues ensure that the reader can confidently design their own I&Csystems and integrate them into existing nuclear sites and projects. Covers various viewpoints, including theory, modeling, design and applications of I&C systems Includes codes and standards, inspection procedures and regulatory issues Combines engineering and physics aspects in one thorough resource, presenting human factors, modeling and HMI together for the first time Instrumentation and Control Systems for Nuclear Power Plants highlights the key role nuclear energy plays in the transition to a lower-carbon energy mix
Download or read book Nuclear Power Plant Instrumentation and Control Systems for Safety and Security written by Yastrebenetsky, Michael and published by IGI Global. This book was released on 2014-02-28 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accidents and natural disasters involving nuclear power plants such as Chernobyl, Three Mile Island, and the recent meltdown at Fukushima are rare, but their effects are devastating enough to warrant increased vigilance in addressing safety concerns. Nuclear Power Plant Instrumentation and Control Systems for Safety and Security evaluates the risks inherent to nuclear power and methods of preventing accidents through computer control systems and other such emerging technologies. Students and scholars as well as operators and designers will find useful insight into the latest security technologies with the potential to make the future of nuclear energy clean, safe, and reliable.
Download or read book Maintenance of Process Instrumentation in Nuclear Power Plants written by H.M. Hashemian and published by Springer Science & Business Media. This book was released on 2006-11-09 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a training course for I and C maintenance engineers in power, process, chemical, and other industries. It summarizes all the scattered literature in this field. The book compiles 30 years of knowledge gained by the author and his staff in testing the I and C systems of nuclear power plants around the world. It focuses on process temperature and pressure sensors and the verification of these sensors’ calibration and response time.
Download or read book Design of Instrumentation and Control Systems for Nuclear Power Plants written by International Atomic Energy Agency and published by IAEA Safety Standards Series N. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is a revision and combination of two Safety Guides, IAEA Safety Standards Series No. NS-G-1.1 and No. NS-G-1.3. The revision takes into account developments in instrumentation and control (I&C) systems since the publication of the earlier Safety Guides. The main changes relate to the continuing development of computer applications and the evolution of the methods necessary for their safe, secure and practical use. In addition, account is taken of developments in human factors engineering and the need for computer security. This Safety Guide references and takes into account other IAEA Safety Standards and Nuclear Security Series publications that provide guidance relating to I&C design.
Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1978 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Human Factors Engineering Aspects of Instrumentation and Control System Design written by IAEA and published by International Atomic Energy Agency. This book was released on 2021-03-31 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety, reliability, and productivity in the nuclear industry result from a systematic consideration of human performance. A plant or other facility consists of both the engineered system and the human users of that system. It is therefore crucial that engineering activities consider the humans who will be interacting with those systems. Engineering design, specifically instrumentation and control (I&C) design, can influence human performance by driving how plant personnel carry out work and respond to events within a nuclear power plant. As a result, humansystem interfaces (HSIs) for plant operators as well as the maintenance and testing of the I&C system cannot be designed by isolated disciplines. The focus of this publication is to integrate knowledge from the disciplines of human factors engineering (HFE) and I&C to emphasize an interdisciplinary approach for the design of better HSIs and consequently improved human performance in nuclear power plants. This is accomplished by practical explanations of the HFE processes and corresponding outputs that inform the I&C development. More specifically, the publication addresses issues in the design process where collaboration between HFE, I&C and other important disciplines and stakeholders is paramount and identifies key tools and tasks for exchanging inputs and outputs between different design disciplines, particularly I&C and HFE. The practical information provided in this publication is intended to support Member States capabilities to improve their approach to I&C through the consideration of HFE.
Download or read book Technical Challenges in the Application and Licensing of Digital Instrumentation and Control Systems in Nuclear Power Plants written by and published by . This book was released on 2015 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt: "With the modernization of existing analogue instrumentation and control (I & C) systems in nuclear power plants through digital I & C technology, and the implementation of digital I & C systems in new plants, the industry is faced with significant challenges. These challenges appear in the form of difficulties in managing the necessarily incremental transition, highly integrated (and interdependent) architectures, the flexible configurability enabled by digital technology, and uncertainty and inconsistency in licensing digital I & C systems and equipment in the different Member States. This publication discusses 17 major issues that utilities, developers, suppliers and regulatory stakeholders need to consider, so that the industry can capture and benefit from shared experience, recent technological developments, and emerging best practices."--Publisher's description.
Download or read book Electrical Systems for Nuclear Power Plants written by Dr. Omar S. Mazzoni and published by John Wiley & Sons. This book was released on 2018-10-30 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers all aspects of electrical systems for nuclear power plants written by an authority in the field Based on author Omar Mazzoni's notes for a graduate level course he taught in Electrical Engineering, this book discusses all aspects of electrical systems for nuclear power plants, making reference to IEEE nuclear standards and regulatory documents. It covers such important topics as the requirements for equipment qualification, acceptance testing, periodic surveillance, and operational issues. It also provides excellent guidance for students in understanding the basis of nuclear plant electrical systems, the industry standards that are applicable, and the Nuclear Regulatory Commission's rules for designing and operating nuclear plants. Electrical Systems for Nuclear Power Plants offers in-depth chapters covering: elements of a power system; special regulations and requirements; unique requirements of a Class 1E power system; nuclear plants containment electrical penetration assemblies; on-site emergency AC sources; on-site emergency DC sources; protective relaying; interface of the nuclear plant with the grid; station blackout (SBO) issues and regulations; review of electric power calculations; equipment aging and decommissioning; and electrical and control systems inspections. This valuable resource: Evaluates industry standards and their relationship to federal regulations Discusses Class 1E equipment, emergency generation, the single failure criterion, plant life, and plant inspection Includes exercise problems for each chapter Electrical Systems for Nuclear Power Plants is an ideal text for instructors and students in electrical power courses, as well as for engineers active in operating nuclear power plants.
Download or read book Safety Related Instrumentation and Control Systems for Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 1985 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety related Instrumentation and Control Systems for Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 1984 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide deals primarily with design requirements for instrumentation and control systems important to safety but not part of the protection system (Safety Series No. 50-SG-D3). It gives recommendations on instrumentation and control systems for the prevention or termination of plant transients to avoid, if possible, the actuation of safety systems.
Download or read book Computer Security Aspects of Design for Instrumentation and Control Systems at Nuclear Power Plants written by IAEA and published by International Atomic Energy Agency. This book was released on 2021-01-08 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transition to digital technology has changed the nature of instrumentation and control (l&C) systems by enabling extensive interconnection of reprogrammable, functionally interdependent I&C systems. This development has made computer security a necessary element for consideration in I&C system design. The benefits and challenges of the various computer security methods and controls with their implementation in nuclear power plant I&C systems are discussed and described in this publication. The publication provides an overview of current knowledge, up to date good practices, experience, and benefits and challenges related to the application of computer security measures. The publication defines the key concepts for computer security for I&C systems at nuclear facilities, explains the risk informed approach to computer security and describes how computer security measures are applied throughout the l&C system life cycle. Situations where I&C systems are interconnected with enterprise management systems are also addressed. The three appendices present case studies with practical application examples.
Download or read book Digital Instrumentation and Control Systems in Nuclear Power Plants written by National Research Council and published by National Academies Press. This book was released on 1997-05-18 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on the development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation without introducing off-setting safety problems. This book identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. It focuses on eight areas: software quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and the adequacy of technical infrastructure.
Download or read book Dynamics and Control of Nuclear Reactors written by Thomas W. Kerlin and published by Academic Press. This book was released on 2019-10-05 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics and Control of Nuclear Reactors presents the latest knowledge and research in reactor dynamics, control and instrumentation; important factors in ensuring the safe and economic operation of nuclear power plants. This book provides current and future engineers with a single resource containing all relevant information, including detailed treatments on the modeling, simulation, operational features and dynamic characteristics of pressurized light-water reactors, boiling light-water reactors, pressurized heavy-water reactors and molten-salt reactors. It also provides pertinent, but less detailed information on small modular reactors, sodium fast reactors, and gas-cooled reactors. Provides case studies and examples to demonstrate learning through problem solving, including an analysis of accidents at Three Mile Island, Chernobyl and Fukushima Daiichi Includes MATLAB codes to enable the reader to apply the knowledge gained to their own projects and research Features examples and problems that illustrate the principles of dynamic analysis as well as the mathematical tools necessary to understand and apply the analysis Publishers Note: Table 3.1 has been revised and will be included in future printings of the book with the following data: Group Decay Constant, li (sec-1) Delayed Neutron Fraction (bi) 1 0.0124 0.000221 2 0.0305 0.001467 3 0.111 0.001313 4 0.301 0.002647 5 1.14 0.000771 6 3.01 0.000281 Total delayed neutron fraction: 0.0067
Download or read book Marine Nuclear Power Technology written by Junchong Yu and published by Springer Nature. This book was released on 2020-04-16 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to basic approaches in and principles of marine nuclear power design, including overall reactor design, in-core design, coolant systems and devices, I&C system design, safety system design, and dynamic analysis assessment. It comprehensively reviews both the fundamentals of and latest trends in nuclear-powered devices, covering their entire lifespan, from design and testing to operation and decommissioning. Further, it explores in detail various real-world conditions in the marine context – such as insufficient space for equipment deployment and frequently changing operating conditions as well as swinging and tilting. Offering extensive information on the design and operation of marine nuclear power systems, the book is a valuable resource for researchers and professionals in the area of marine science and nuclear engineering, and graduate students intending to embark on a career in the field.
Download or read book Dependability Assessment of Software for Safety Instrumentation and Control Systems at Nuclear Power Plants written by International Atomic Energy Agency and published by International Atomic Energy Agency. This book was released on 2018-09-30 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication defines a framework that represents the state of the art in assessment methodologies for safety and instrumentation and control software used at nuclear power plants. It describes an approach for developing and communicating assessments based on claims, argument and evidence. The assessment of software dependability, which encompasses properties such as safety, reliability, availability, maintainability and security, is an essential and challenging aspect of the safety justification. Guiding principles for a dependability assessment are established to provide the basis for defining an assessment strategy and implementing the assessment process. Sources of evidence for the assessment are provided and lessons learned from past digital instrumentation and control system implementation in areas such as software development, operational usage, regulatory review and platform certification are also described.
Download or read book Power plant Control and Instrumentation written by David Lindsley and published by IET. This book was released on 2000 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes control systems for boilers and heat-recovery steam generators (HRSGs) in a variety of applications, from waste-to-energy plants to combined-cycle gas-turbine power stations. Basics such as methods of connecting instruments are explained, and more advanced discussions of design features of distributed control systems are also included. At every stage, emphasis is given to the interactive nature of plants and to troubleshooting and problem solving. Includes chapter summaries. The author is Fellow of the Institution of Electrical Engineers, and the Institute of Marine Engineers, and is a Senior Member of the Instrument Society of America. Annotation copyrighted by Book News, Inc., Portland, OR
