Download or read book Earthquake Resistant Design of Buildings written by Muhammad Hadi and published by CRC Press. This book was released on 2017-10-06 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing important concepts in the study of earthquakes related to retrofitting of structures to be made earthquake resistant. The book investigates the pounding effects on base-isolated buildings, the soil-structure-interaction effects on adjacent buildings due to the impact, the seismic protection of adjacent buildings and the mitigation of earthquakeinduced vibrations of two adjacent structures. These concepts call for a new understanding of controlled systems with passive-active dampers and semi-active dampers. The passive control strategy of coupled buildings is investigated for seismic protection in comparison to active and semi-active control strategies.
Download or read book Earthquake Resistant Design of Structures written by Shashikant K. Duggal and published by OUP India. This book was released on 2013-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake-resistant Design of Structures 2e is designed for undergraduate students of civil engineering.
Download or read book Earthquake Resistant Structures written by Mohiuddin Ali Khan and published by Butterworth-Heinemann. This book was released on 2013-03-18 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake engineering is the ultimate challenge for structural engineers. Even if natural phenomena involve great uncertainties, structural engineers need to design buildings, bridges, and dams capable of resisting the destructive forces produced by them. These disasters have created a new awareness about the disaster preparedness and mitigation. Before a building, utility system, or transportation structure is built, engineers spend a great deal of time analyzing those structures to make sure they will perform reliably under seismic and other loads. The purpose of this book is to provide structural engineers with tools and information to improve current building and bridge design and construction practices and enhance their sustainability during and after seismic events. In this book, Khan explains the latest theory, design applications and Code Provisions. Earthquake-Resistant Structures features seismic design and retrofitting techniques for low and high raise buildings, single and multi-span bridges, dams and nuclear facilities. The author also compares and contrasts various seismic resistant techniques in USA, Russia, Japan, Turkey, India, China, New Zealand, and Pakistan. Written by a world renowned author and educator Seismic design and retrofitting techniques for all structures Tools improve current building and bridge designs Latest methods for building earthquake-resistant structures Combines physical and geophysical science with structural engineering
Download or read book Wind and Earthquake Resistant Buildings written by Bungale S. Taranath and published by CRC Press. This book was released on 2004-12-15 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed as a resource for practicing engineers, while simultaneously serving as a text in a formal classroom setting, Wind and Earthquake Resistant Buildings provides a fundmental understanding of the behavior of steel, concrete, and composite building structures. The text format follows, in a logical manner, the typical process of designing a bu
Download or read book EARTHQUAKE RESISTANT DESIGN OF STRUCTURES written by PANKAJ AGRAWAL and published by PHI Learning Pvt. Ltd.. This book was released on 2006-01-01 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and well-organized book presents the concepts and principles of earthquake resistant design of structures in an easy-to-read style. The use of these principles helps in the implementation of seismic design practice. The book adopts a step-by-step approach, starting from the fundamentals of structural dynamics to application of seismic codes in analysis and design of structures. The text also focusses on seismic evaluation and retrofitting of reinforced concrete and masonry buildings. The text has been enriched with a large number of diagrams and solved problems to reinforce the understanding of the concepts. Intended mainly as a text for undergraduate and postgraduate students of civil engineering, this text would also be of considerable benefit to practising engineers, architects, field engineers and teachers in the field of earthquake resistant design of structures.
Download or read book Earthquake Resistant Buildings written by M.Y.H. Bangash and published by Springer Science & Business Media. This book was released on 2011-08-19 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise work provides a general introduction to the design of buildings which must be resistant to the effect of earthquakes. A major part of this design involves the building structure which has a primary role in preventing serious damage or structural collapse. Much of the material presented in this book examines building structures. Due to the recent discovery of vertical components, it examines not only the resistance to lateral forces but also analyses the disastrous influence of vertical components. The work is written for Practicing Civil, Structural, and Mechanical Engineers, Seismologists and Geoscientists. It serves as a knowledge source for graduate students and their instructors.
Download or read book Earthquake Resistant Concrete Structures written by Andreas Kappos and published by CRC Press. This book was released on 2014-04-21 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces practising engineers and post-graduate students to modern approaches to seismic design, with a particular focus on reinforced concrete structures, earthquake resistant design of new buildings and assessment, repair and strengthening of existing buildings.
Download or read book Design of Earthquake Resistant Structures written by Emilio Rosenblueth and published by . This book was released on 1980 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration of Buildings to Wind and Earthquake Loads written by T. Balendra and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in the development of high strength materials, coupled with more advanced computational methods and design procedures, have led to a new generation of tall and slender buildings. These structures are very sensitive to the most common dynamic loads; wind and earthquakes. The primary requirement for a successful design is to provide safety while taking into account serviceability requirements. This book provides a well-balanced and broad coverage of the information needed for the design of structural systems for wind- and earthquake-resistant buildings. It covers topics such as the basic concepts in structural dynamics and structural systems, the assessment of wind and earthquake loads acting on the system, the evaluation of the system response to such dynamic loads and the design for extreme loading. The text is generously illustrated and supported by numerical examples and will be of great interest to practising engineers and researchers in structural, civil and design engineering and also to architects. The author has drawn on his experience as a teacher, researcher and consultant.
Download or read book Earthquake Resistant Engineering Structures X written by C.A. Brebbia and published by WIT Press. This book was released on 2015-09-15 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing the latest research on preparation for and mitigation of future earthquakes, this book addresses an area of increasing importance to many areas around the world. It contains research presented at the ninth and latest in a series of biennial conferences on the topic organised by the Wessex Institute. As world population has concentrated in urban areas, we have seen the consequences of natural disasters take an ever higher toll in human life and property. Adding to this trend, earthquake activity is being registered in areas that were not previously very active, thus the need for research into the application of technological advances to the specific area of earthquake engineering. This volume presents those advances. The papers cover Seismic Isolation and Energy Dissipation; Building Performance During Earthquakes; Nonlinear Numerical Analysis; Performance Based Design; Experimental Studies; Seismic Hazard Evaluation and Microzoning for Structural Design; Seismic Hazard Assessment; Case Studies.
Download or read book Earthquake Resistant Engineering Structures III written by C. A. Brebbia and published by WIT Press (UK). This book was released on 2001 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Third International Conference on Earthquake Resistant and Engineering Structures, ERES III"--P. facing t.p.
Download or read book Seismic Isolation for Earthquake resistant Structures written by Petros Ioannis Komodromos and published by Advances in Earthquake Enginee. This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ground motion due to earthquake excitation often induces disastrous disturbances that severely damage structures and their contents. Conventional earthquake-resistant design focuses on the strengthening of structures to avoid collapse, while little attention is paid to the prevention of damage as it is almost impossible to construct completely earthquake proof structures at reasonable cost. This state-of-the-art volume explores seismic isolation as an alternative and performance-based design approach to minimise earthquake induced loads and resulting damage in low to medium-rise buildings. A discussion of the characteristics, advantages and limitations of seismic isolation is followed by a demonstration of its capability to decouple a structure from the damaging effects of ground acceleration. Describes currently used seismic isolation systems in detail. Evaluates the performance of seismically isolated structures and provides examples of their response under earthquake action. Proposes a preliminary design methodology for seismically isolated structures. Accessible to both students and practising structural engineers who need to familiarise themselves with this approach.
Download or read book Computer Analysis and Design of Earthquake Resistant Structures written by D. E. Beskos and published by Computational Mechanics. This book was released on 1997 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis Procedure for Earthquake Resistant Structures written by Farzad Hejazi and published by Springer. This book was released on 2018-05-15 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an analysis procedure for structures that are exposed to the lateral loads such as earthquake and wind. It includes the process for calculating and distributing the effective load into structural elements, as well as for calculating the displacements for different types of structures, e.g. reinforced concrete and steel framed structures. The book provides civil engineers with clear guidelines on how to perform seismic analysis for various building systems, and how to distribute the lateral load to the structural components. This book consists of 4 chapters: The first chapter offers an introduction, while Chapter 2 discusses moment resistance frame. The final two chapters explore shear wall frames and brace frames respectively. Each chapter follows the same structure, explaining step by step all the necessary algorithms, equations and procedures for calculating 1) loads, 2) the centre of mass, 3) stiffness of structures, 4) centre of stiffness, 5) lateral loading, 6) the distribution of lateral loads, and 7) the lateral displacement. Demonstrating the implementation of real building analysis, the book provides architectural drawings and structural plans at the beginning of each chapter.
Download or read book Earthquake resistant Design Of Masonry Buildings written by Miha Tomazevic and published by World Scientific. This book was released on 1999-07-05 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few decades, a considerable amount of experimental and analytical research on the seismic behaviour of masonry walls and buildings has been carried out. The investigations resulted in the development of methods for seismic analysis and design, as well as new technologies and construction systems. After many centuries of traditional use and decades of allowable stress design, clear concepts for limit state verification of masonry buildings under earthquake loading have recently been introduced in codes of practice.Although this book is not a review of the state-of-the-art of masonry structures in earthquake zones, an attempt has been made to balance the discussion on recent code requirements, state-of-the-art methods of earthquake-resistant design and the author's research work, in order to render the book useful for a broader application in design practice. An attempt has also been made to present, in a condensed but easy to understand way, all the information needed for earthquake-resistant design of masonry buildings constructed using traditional systems. The basic concepts of limit state verification are presented and equations for seismic resistance verification of masonry walls of all types of construction, (unreinforced, confined and reinforced) as well as masonry-infilled reinforced concrete frames, are addressed. A method for seismic resistance verification, compatible with recent code requirements, is also discussed. In all cases, experimental results are used to explain the proposed methods and equations.An important part of this book is dedicated to the discussion of the problems of repair, retrofit and rehabilitation of existing masonry buildings, including historical structures in urban centres. Methods of strengthening masonry walls as well as improving the structural integrity of existing buildings are described in detail. Wherever possible, experimental evidence regarding the effectiveness of the proposed strengthening methods is given.
Download or read book Design of Wind and Earthquake Resistant Reinforced Concrete Buildings written by Somnath Ghosh and published by CRC Press. This book was released on 2021-06-14 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Wind and Earthquake Resistant Reinforced Concrete Buildings explains wind and seismic design issues of RCC buildings in brief and provides design examples based on recommendations of latest IS codes essential for industrial design. Intricate issues of RCC design are discussed which are supplemented by real-life examples. Guidelines are presented for evaluating the acceptability of wind-induced motions of tall buildings. Design methodologies for structures to deform well beyond their elastic limits, which is essential under seismic excitation, have been discussed in detail. Comparative discussion including typical design examples using recent British, Euro and American codes is also included. Features: Explains wind and earthquake resistant design issues, balancing theoretical aspects and design implications, in detail Discusses issues for designing the wind and earthquake resistant RCC structures Provides comprehensive understanding, analysis, design and detailing of the structures Includes a detailed discussion on IS code related to wind and earthquake resistant design and its comparison with Euro, British and American codes Contains architectural drawings and structural drawings The book is aimed at researchers, professionals, graduate students in wind and earthquake engineering, design of RCC structures, modelling and analysis of structures, civil/infrastructure engineering.
Download or read book Design of Earthquake resistant Buildings written by Minoru Wakabayashi and published by McGraw-Hill Companies. This book was released on 1986 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
