Download or read book Design of Aspirated Compressor Blades Using Three Dimensional Inverse Method written by and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A three-dimensional viscous inverse method is extended to allow blading design with full interaction between the prescribed pressure-loading distribution and a specified transpiration scheme. Transpiration on blade surfaces and endwalls is implemented as inflow/outflow boundary conditions, and the basic modifications to the method are outlined. This paper focuses on a discussion concerning an application of the method to the design and analysis of a supersonic rotor with aspiration. Results show that an optimum combination of pressure-loading tailoring with surface aspiration can lead to a minimization of the amount of sucked flow required for a net performance improvement at design and off-design operations.

Download or read book Three dimensional Inverse Design Methods for Turbine and Compressor Blades written by A. Demeulenaere and published by . This book was released on 1998 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Practical use of 3D inverse method for compressor blade design ASME 98 GT 115 written by S. Damle and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Stockholm, Sweden, June 2 - June 5, 1998.

Download or read book Design and Analysis of Axial Aspirated Compressor Stages written by Ali Abbas Merchant and published by . This book was released on 1999 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gas Turbines written by Gurrappa Injeti and published by BoD – Books on Demand. This book was released on 2010-09-27 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to provide valuable information for the analysis and design of various gas turbine engines for different applications. The target audience for this book is design, maintenance, materials, aerospace and mechanical engineers. The design and maintenance engineers in the gas turbine and aircraft industry will benefit immensely from the integration and system discussions in the book. The chapters are of high relevance and interest to manufacturers, researchers and academicians as well.

Download or read book Application of a three dimensional inverse method to the design of a centrifugal compressor impeller ASME 98 GT 127 written by Alain Demeulenaere and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Stockholm, Sweden, June 2 - June 5, 1998.

Download or read book The Inverse Design of 3D Compressor Blades with a Discrete Adjoint Method for the Navier Stokes Equations written by Garrett Deewayne Martin and published by . This book was released on 2004 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced 3D Inverse Method for Designing Turbomachine Blades written by and published by . This book was released on 1995 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: To meet the goal of 60% plant-cycle efficiency or better set in the ATS Program for baseload utility scale power generation, several critical technologies need to be developed. One such need is the improvement of component efficiencies. This work addresses the issue of improving the performance of turbo-machine components in gas turbines through the development of an advanced three-dimensional and viscous blade design system. This technology is needed to replace some elements in current design systems that are based on outdated technology.

Download or read book A New Compressor and Turbine Blade Design Method Based on Three dimensional Euler Computations with Moving Boundaries written by Alain Demeulenaere and published by . This book was released on 1999 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book On 3D inverse design of centrifugal compressor impellers with splitter blades ASME 98 GT 507 written by M. Zangeneh and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Stockholm, Sweden, Jun 2-5, 1998.

Download or read book Application of a Three dimensional Inverse Method to the Design of a Centrifugal Compressor Impeller written by A. Demeulenaere and published by . This book was released on 1998 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Three dimensional Inverse Method for Turbomachinery Blading Design written by Alain Demeulenaere and published by . This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented at the International Gas Turbine and Aeroengine Congress &Exhibition Birmingham, UK - June 10-13, 1996.

Download or read book Advances in Gas Turbine Technology written by Ernesto Benini and published by BoD – Books on Demand. This book was released on 2011-11-04 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas turbine engines will still represent a key technology in the next 20-year energy scenarios, either in stand-alone applications or in combination with other power generation equipment. This book intends in fact to provide an updated picture as well as a perspective vision of some of the major improvements that characterize the gas turbine technology in different applications, from marine and aircraft propulsion to industrial and stationary power generation. Therefore, the target audience for it involves design, analyst, materials and maintenance engineers. Also manufacturers, researchers and scientists will benefit from the timely and accurate information provided in this volume. The book is organized into five main sections including 21 chapters overall: (I) Aero and Marine Gas Turbines, (II) Gas Turbine Systems, (III) Heat Transfer, (IV) Combustion and (V) Materials and Fabrication.

Download or read book Development of S3D and Adjoint Design Methods for Efficient Aerodynamic Design of Three Dimensional High Speed Compressor Blades written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the ASME Turbo Expo written by and published by . This book was released on 2007 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Three Dimensional Design of Compressor Blades written by John Jude Bolger and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Use of an Inverse Method for the Design of High Efficiency Compressor and Turbine Blades with Large Change in Radius written by Georges Meauze and published by . This book was released on 1984 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: