Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 38 (thesis year 1993) a total of 13,787 thesis titles from 22 Canadian and 164 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 38 reports theses submitted in 1993, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.

Download or read book Design for Six Sigma written by Elizabeth A. Cudney and published by CRC Press. This book was released on 2016-08-05 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design for Six Sigma (DFSS) is an innovative continuous improvement methodology for designing new products, processes, and services by integrating Lean and Six Sigma principles. This book will explain how the DFSS methodology is used to design robust products, processes, or services right the first time by using the voice of the customer to meet Six Sigma performance. Robust designs are insensitive to variation and provide consistent performance in the hands of the customer. DFSS is used to meet customer needs by understanding their requirements, considering current process capability, identifying and reducing gaps, and verifying predictions to develop a robust design. This book offers: Methodology on how to implement DFSS in various industries Practical examples of the use of DFSS Sustainability utilizing Lean Six Sigma techniques and Lean product development Innovative designs using DFSS with concept generation Case studies for implementing the DFSS methodology Design for Six Sigma (DFSS) enables organizations to develop innovative designs. In order to redesign an existing process or design a new process, the success is dependent on a rigorous process and methodology. DFSS ensures that there are minimal defects in the introduction of new products, processes, or services. The authors have compiled all of the tools necessary for implementation of a practical approach though innovation.

Download or read book Quality Improvement Techniques in Construction written by Steven Mccabe and published by Routledge. This book was released on 2014-09-25 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality management has received much attention in recent years, not least in the construction industry. This book provides a description of the techniques of quality management and how they are implemented, regardless of the context. The author applies the techniques to the construction industry and brings in some practical experience from contractors in the construction industry.

Download or read book Construction Process Improvement written by Brian Atkin and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction process has come under intense scrutiny in recent times and this is set to continue as building owners and users demand better value for money from a more sustainable built environment. The construction sector’s actors are responding to the challenges implicit in this drive for greater competitiveness and social responsibility. New forms of procurement, innovation programmes, knowledge management, CAD-supported processes, predictive and diagnostic tools, and many more initiatives are helping to transform the sector. Construction Process Improvement showcases 21 examples of how directed efforts are being taken to raise productivity and quality, reduce waste and costs, and provide more certain and durable products for the sector’s customers. Each example is the subject of a closely coupled collaborative project in which answers are being sought on matters of strategic importance to companies. The chapters that describe and discuss these projects balance state-of-the-art reviews with details of the work being undertaken and, in many cases, the results that are being implemented within the companies. Construction Process Improvement deals with issues that matter to best practice companies and researchers in industry and universities. It covers, amongst other topics, modularisation for manufactured housing, life cycle methods in housing, commercial buildings and services installations, tools and techniques for performance prediction and diagnostics, coordination of design and production processes, novel use of traditional materials, new forms of procurement and the role of innovation, public private partnerships, partnering structures, learning organisations, management of major refurbishment, management information systems, TQM and continuous improvement, CAAD methodology, tools and 4-D CAD, and facilities management. This book analyses the way forward for improving the construction process, in particular the links between research and development and industrial competitiveness. The implementation of new methods and thinking in companies is examined and important advice for senior managers and researchers is offered.

Download or read book Sustainable Current Approaches in Architectural Science and Technology written by A. Nejat İÇÖZ and published by Livre de Lyon. This book was released on 2022-10-15 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Current Approaches in Architectural Science and Technology, Livre de Lyon

Download or read book Construction Supply Chain Management in the Fourth Industrial Revolution Era written by Temidayo Oluwasola Osunsanmi and published by Emerald Group Publishing. This book was released on 2022-09-23 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing invaluable support for construction in determining the acceptable practice and standard for regulatory bodies and managers, Construction Supply Chain Management in the Fourth Industrial Revolution Era also appeals to researchers as it expands the frontiers of knowledge in the fourth industrial era.

Download or read book Construction Innovation and Process Improvement written by Akintola Akintoye and published by John Wiley & Sons. This book was released on 2012-04-30 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation in construction is essential for growth. The industry strives to remain competitive using a variety of approaches and needs to engage structured initiatives linked to proven innovation concepts, techniques and applications. Even in mature markets like the Architecture, Engineering and Construction (AEC) sector, where business behaviour is generally considered as being risk averse, it is increasingly important to embed innovation into mainstream business practices. In Construction Innovation and Process Improvement a number of wide ranging issues from construction practice in different countries with different contexts are presented to provide a rich collection of literature embracing theory and practice. Chapters are divided into three broad themes of construction innovation relating to: Theory and Practice; Process Drivers; and Future Technologies. Several questions are posed, including for example: What is particularly unique about construction innovation in theory and practice? What are the major drivers of construction innovation? What factors are needed to support and deliver future construction technologies? In attempting to respond to such questions, the book sheds new light on these challenges, and provides readers with a number of ways forward, especially cognisant of the increased role of globalisation, the enhanced impact of knowledge, and importance of innovation. All these can have a significant impact on strategic decision-making, competitive advantage, and sustainable policies and practices. Part One deals with change management, technology, sustainable construction, and supply chain management; Part Two addresses innovation and process improvement drivers, including strategic management, concurrent engineering, risk management, innovative procurement, knowledge management; Part Three explores future technologies in construction – and particularly, how these can be harnessed and leveraged to help procure innovation and process improvement.

Download or read book Industry Practices Processes and Techniques Adopted in Education written by Kathryn MacCallum and published by Springer Nature. This book was released on 2022-08-25 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a single source of reference for educators interested in understanding how industry-based ideas have been adapted into different educational contexts, and supports their utilisation in practice. The link between industry-based ideas and their application in education has enabled educators to develop engaging, collaborative, and creative learning environments, as well as better preparing their students for an increasingly complex and dynamic global environment. This book includes contributions from educators, researchers, and practitioners, who have integrated industry-based ideas into their teaching, and explores how these concepts and practices support the creation of effective learning environments. Through these diverse, international contributions, this book enables wider engagement with, and critical analysis of, the application of industry practices, processes and techniques in the development of collaborative and creative learning environments.

Download or read book Automotive Industries the Automobile written by and published by . This book was released on 1926 with total page 1578 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Production Management Systems Artificial Intelligence for Sustainable and Resilient Production Systems written by Alexandre Dolgui and published by Springer Nature. This book was released on 2021-08-31 with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five-volume set IFIP AICT 630, 631, 632, 633, and 634 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2021, held in Nantes, France, in September 2021.* The 378 papers presented were carefully reviewed and selected from 529 submissions. They discuss artificial intelligence techniques, decision aid and new and renewed paradigms for sustainable and resilient production systems at four-wall factory and value chain levels. The papers are organized in the following topical sections: Part I: artificial intelligence based optimization techniques for demand-driven manufacturing; hybrid approaches for production planning and scheduling; intelligent systems for manufacturing planning and control in the industry 4.0; learning and robust decision support systems for agile manufacturing environments; low-code and model-driven engineering for production system; meta-heuristics and optimization techniques for energy-oriented manufacturing systems; metaheuristics for production systems; modern analytics and new AI-based smart techniques for replenishment and production planning under uncertainty; system identification for manufacturing control applications; and the future of lean thinking and practice Part II: digital transformation of SME manufacturers: the crucial role of standard; digital transformations towards supply chain resiliency; engineering of smart-product-service-systems of the future; lean and Six Sigma in services healthcare; new trends and challenges in reconfigurable, flexible or agile production system; production management in food supply chains; and sustainability in production planning and lot-sizing Part III: autonomous robots in delivery logistics; digital transformation approaches in production management; finance-driven supply chain; gastronomic service system design; modern scheduling and applications in industry 4.0; recent advances in sustainable manufacturing; regular session: green production and circularity concepts; regular session: improvement models and methods for green and innovative systems; regular session: supply chain and routing management; regular session: robotics and human aspects; regular session: classification and data management methods; smart supply chain and production in society 5.0 era; and supply chain risk management under coronavirus Part IV: AI for resilience in global supply chain networks in the context of pandemic disruptions; blockchain in the operations and supply chain management; data-based services as key enablers for smart products, manufacturing and assembly; data-driven methods for supply chain optimization; digital twins based on systems engineering and semantic modeling; digital twins in companies first developments and future challenges; human-centered artificial intelligence in smart manufacturing for the operator 4.0; operations management in engineer-to-order manufacturing; product and asset life cycle management for smart and sustainable manufacturing systems; robotics technologies for control, smart manufacturing and logistics; serious games analytics: improving games and learning support; smart and sustainable production and supply chains; smart methods and techniques for sustainable supply chain management; the new digital lean manufacturing paradigm; and the role of emerging technologies in disaster relief operations: lessons from COVID-19 Part V: data-driven platforms and applications in production and logistics: digital twins and AI for sustainability; regular session: new approaches for routing problem solving; regular session: improvement of design and operation of manufacturing systems; regular session: crossdock and transportation issues; regular session: maintenance improvement and lifecycle management; regular session: additive manufacturing and mass customization; regular session: frameworks and conceptual modelling for systems and services efficiency; regular session: optimization of production and transportation systems; regular session: optimization of supply chain agility and reconfigurability; regular session: advanced modelling approaches; regular session: simulation and optimization of systems performances; regular session: AI-based approaches for quality and performance improvement of production systems; and regular session: risk and performance management of supply chains *The conference was held online.

Download or read book BIM in the Construction Industry written by Hee Sung Cha and published by MDPI. This book was released on 2021-01-15 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 19 peer-reviewed papers on the subject of BIM in the construction industry. These articles cover recent advances in the development of BIM technologies and applications in the field of architecture, engineering, and construction (AEC) industry.

Download or read book Agile Project Management written by Project Management Journal and published by John Wiley & Sons. This book was released on 2013-06-26 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of the Agile Movement, whatever the area of application or discipline, comes from the famous “faster, cheaper, better" maxim. As such, the agile manufacturing paradigm rests on four principles: response to change and uncertainty, supplying highly customized products, synthesis of diverse technologies, and intra-enterprise and inter-enterprise integration. For the reader interested in agile project management applications, response to changes, and transformations and its impact on managing projects, this book is a must-read. Various insights are covered, including: how to master complexity and changes in projects, economy, and society; how interaction between the project management team and project owners can influence risk management; how to move beyond the traditional mechanistic project management approach; how to include agile principles into an improved Logical Framework Analysis structure; what the impact is of agile principles on project management organizations what kind of innovative project management practice supports agile principles; and much more.

Download or read book Continuous Cost Improvement in Construction written by Temitope Seun Omotayo and published by Routledge. This book was released on 2022-03-21 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous Cost Improvement in Construction: Theory and Practice aims to provide students and practitioners with an all-inclusive understanding of strategies for adopting continuous improvement in construction cost management. This book addresses continuous improvement practices from the perspective of cost management and applies case study examples to question the readers’ perspective of continuous cost improvement strategies in the project lifecycle. Continuous cost improvement practices in managing the cost of minor, major, and mega projects are all connected with decision-making tools for devising strategies for choosing the approaches for mitigating the effect of cost overruns in construction projects. Continuous cost improvement should be taught as part of modern methods and processes of construction in further and higher education institutions. This book will be key reading for all advanced undergraduate and postgraduate courses in Construction Project Management, Building and Quantity Surveying. Professionals in all aspects of the AEC industry will also gain greatly from engaging with the key concepts of continuous cost improvement throughout this book.

Download or read book Building a New Performance Vision written by Thomas J. LaBonte and published by Association for Talent Development. This book was released on 2023-05-26 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite their best efforts, many organizations find it difficult to shake the silo mentality that stands in the way of real strides in performance improvement. Building a New Performance Vision addresses this issue head on by arguing that training, human resources, organizational development, quality, information technology, and knowledge management professionals should all be playing on the same HPI team. Each of these functions spends most of its energy promoting individual agendas and not the organization’s business and performance needs. The cure for this unhappy state of affairs is the creation of a single, unified HPI process and function that brings together these disparate groups under the banner of shared business goals. Readers are offered a clear path to accomplish this organizational feat through the use of step-by-step instructions, tools, tips, and job aids.

Download or read book Planning and Designing of Specialty Healthcare Facilities written by Shakti Kumar Gupta and published by Jaypee Brothers Medical Publishers. This book was released on 2020-06-30 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Drivers of Continuous Improvement in Construction Health Safety and Wellbeing written by Nnedinma Umeokafor and published by Taylor & Francis. This book was released on 2024-11-29 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook presents opportunities, best practices, and case studies backed by cutting edge research on the drivers of continuous improvement of health, safety, and wellbeing in the architecture, engineering, construction, and facility management sector. The book consists of 23 chapters with six themes covering: ● Drivers of the business case for healthier and safer construction ● Opportunities and drivers of digital technologies for improving health and safety ● Drivers of human factors for improving health and safety ● Drivers of safer design and procurement ● Drivers of better health and wellbeing for construction. ● Opportunities for driving equality and inclusivity for safer construction. The book will be beneficial to academics, undergraduate and postgraduate (research and taught) students, professional institutions (such as the Institution of Occupational Safety and Health), health and safety professionals (health and safety officers, consultants and managers), occupational health professionals, mental health and wellbeing professionals, construction managers, architects, project professionals, engineers (design, construction, project, site, electrical, mechanical, civil, building services, and structural), facilities managers, quantity surveyors, and site managers. The aim of the book is to provide critical perspectives alongside evidence based practical examples of success stories, that should inspire readers and engender continuous improvement in health, safety, and wellbeing in the construction industry.

Download or read book Digital Twin Driven Smart Design written by Fei Tao and published by Academic Press. This book was released on 2020-05-22 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Twin Driven Smart Design draws on the latest industry practice and research to establish a basis for the implementation of digital twin technology in product design. Coverage of relevant design theory and methodology is followed by detailed discussions of key enabling technologies that are supported by cutting-edge case studies of implementation. This groundbreaking book explores how digital twin technology can bring improvements to different kinds of product design process, including functional, lean and green. Drawing on the work of researchers at the forefront of this technology, this book is the ideal guide for anyone interested in digital manufacturing or computer-aided design. Provides detailed case studies that explore key applications of digital twin technology in design practice Introduces the concept of using digital twins to create the virtual commissioning of design projects Presents a framework to help engineers incorporate digital twins into their product design process