Download or read book Design of a Fuel Injection System for a Two Stroke Petrol Engine written by K. E. Nankivell and published by . This book was released on 1976 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Fuel Injection and Emission in Two Stroke Engines written by Wadysaw Mitianiec and published by Nova Science Publishers. This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main goal of the book is the presentation of the last theoretical and experimental works concerning fuel injection systems, mainly in small power two-stroke engines as well as in marine engines. This book includes thirteen chapters devoted to the processes of fuel injection and the combustion that takes place in a stratified charge within the cylinders of two-stroke engines. In the first two chapters, the division into different injection systems in two-stroke engines and each injection system is briefly described. Various theoretical and practical solutions of fueling system designs are described. In Chapter Three, mathematical models, the spatial movement of gas in the cylinder and the combustion chamber are introduced, taking into account the turbulence of the charge. Chapter Four relates to the behavior of fuel injected into the gaseous medium, including evaporation processes, disintegration and processes occurring while the fuel drops connect with the wall. The next section describes the zero-dimensional model of fuel injection in two-stroke engines along with examples of numerical calculations. The sixth chapter is devoted to CFD multi-dimensional models of movement and evaporation of the fuel in a closed gaseous medium, occurring also in other engine types. Chapter Seven describes a two-zone model of the combustion process and the effect of the geometry of the combustion chamber on the flame propagation with a simplified verification model of combustion. Chapter Eight compares the propagation phase of gas and liquid fuels concerning direct fuel injection as well as the direct fuel injection from the cylinder head and the thermodynamic parameters of the charge. The formation of the components during the combustion process in the direct fuel injection two-stroke engine was obtained by numerical calculations and results are discussed in Chapter Nine. Chapter Ten describes the parameters of the two-stroke engine with a direct fuel injection carried out at the Cracow University of Technology. Additionally, the chapter presents CFD simulations of fuel propagation and combustion processes, taking into account the formation of toxic components and exhaust gas emission. The processes of two direct rich mixture injection systems FAST and RMIS developed in CUT are presented in Chapter Eleven. Miscellaneous problems of direct fuel injection, such as characteristics of fuel injectors, problems of direct gaseous fuel injection, and the application of fuelling systems in outboard engines and snowmobile vehicles are presented in Chapter Twelve. A comparison of working parameters in two- and four stroke engines is also mapped out. The last chapters contain the final conclusions and remarks concerning fuel injection and emission of exhaust gases in small two-stroke engines. This book is a comprehensive monograph on fuel injection. The author presents a series of theoretical and design information from his own experience and on the basis of the works of other authors. The main text intends to direct fuel injection with respect to gas motion in the combustion chamber and influence the injection parameters for exhaust emission. The book presents its own theoretical work and experimental tests concerning a two-stroke gasoline engine with electrically controlled direct fuel injection. The book describes the processes of a general nature also occurring in other types of engines and presents a comparison of different injection systems on working parameters and gas emission. The book contains 294 images, 290 equations and 16 tables obtained from the CFD simulation and experimental works.

Download or read book Fundamentals of Fuel Injection and Emission in Two stroke Engines written by Władysław Mitianiec and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Two Stroke Cycle Engine written by JohnB. Heywood and published by Routledge. This book was released on 2017-11-01 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the two-stroke cycle internal combustion engine, used in compact, lightweight form in everything from motorcycles to chainsaws to outboard motors, and in large sizes for marine propulsion and power generation. It first provides an overview of the principles, characteristics, applications, and history of the two-stroke cycle engine, followed by descriptions and evaluations of various types of models that have been developed to predict aspects of two-stroke engine operation.

Download or read book Design and Construction of a Direct Fuel Injection System for a Two Cycle Gasoline Engine written by Robert William Lorimer and published by . This book was released on 1950 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design and Simulation of Two Stroke Engines written by Gordon Blair and published by SAE International. This book was released on 1996-02-01 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Simulation of Two-Stroke Engines is a unique hands-on information source. The author, having designed and developed many two-stroke engines, offers practical and empirical assistance to the engine designer on many topics ranging from porting layout, to combustion chamber profile, to tuned exhaust pipes. The information presented extends from the most fundamental theory to pragmatic design, development, and experimental testing issues. Chapters cover: Introduction to the Two-Stroke Engine Combustion in Two-Stroke Engines Computer Modeling of Engines Reduction of Fuel Consumption and Exhaust Emissions Reduction of Noise Emission from Two-Stroke Engines and more

Download or read book Design of a Fuel Injection System for a Gasoline Engine written by Albert S. Regula and published by . This book was released on 1942 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Basic Design of Two stroke Engines written by Gordon P. Blair and published by . This book was released on 1990 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: This informative publication is a hands-on reference source for the design of two-stroke engines. The state-of-the-art is presented in such design areas as unsteady gas dynamics, scavenging, combustion, emissions and silencing. In addition, this comprehensive publication features a computer program appendix of 28 design programs, allowing the reader to recreate the applications described in the book.

Download or read book Two stroke Engine Design and Development written by and published by . This book was released on 1991-01-01 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Designing and Tuning High Performance Fuel Injection Systems written by Greg Banish and published by CarTech Inc. This book was released on 2009 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Greg Banish takes his best-selling title, Engine Management: Advanced Tuning, one step further as he goes in-depth on the combustion basics of fuel injection as well as benefits and limitations of standalone. Learn useful formulas, VE equation and airflow estimation, and more. Also covered are setups and calibration, creating VE tables, creating timing maps, auxiliary output controls, start to finish calibration examples with screen shots to document the process. Useful appendixes include glossary and a special resources guide with standalone manufacturers and test equipment manufacturers

Download or read book FUNDAMENTALS OF INTERNAL COMBUSTION ENGINES written by H. N. GUPTA and published by PHI Learning Pvt. Ltd.. This book was released on 2012-12-10 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive introduction to the basics of Internal Combustion Engines, this book is suitable for: Undergraduate-level courses in mechanical engineering, aeronautical engineering, and automobile engineering. Postgraduate-level courses (Thermal Engineering) in mechanical engineering. A.M.I.E. (Section B) courses in mechanical engineering. Competitive examinations, such as Civil Services, Engineering Services, GATE, etc. In addition, the book can be used for refresher courses for professionals in auto-mobile industries. Coverage Includes Analysis of processes (thermodynamic, combustion, fluid flow, heat transfer, friction and lubrication) relevant to design, performance, efficiency, fuel and emission requirements of internal combustion engines. Special topics such as reactive systems, unburned and burned mixture charts, fuel-line hydraulics, side thrust on the cylinder walls, etc. Modern developments such as electronic fuel injection systems, electronic ignition systems, electronic indicators, exhaust emission requirements, etc. The Second Edition includes new sections on geometry of reciprocating engine, engine performance parameters, alternative fuels for IC engines, Carnot cycle, Stirling cycle, Ericsson cycle, Lenoir cycle, Miller cycle, crankcase ventilation, supercharger controls and homogeneous charge compression ignition engines. Besides, air-standard cycles, latest advances in fuel-injection system in SI engine and gasoline direct injection are discussed in detail. New problems and examples have been added to several chapters. Key Features Explains basic principles and applications in a clear, concise, and easy-to-read manner Richly illustrated to promote a fuller understanding of the subject SI units are used throughout Example problems illustrate applications of theory End-of-chapter review questions and problems help students reinforce and apply key concepts Provides answers to all numerical problems

Download or read book Two Stroke Cycle Engine written by JohnB. Heywood and published by Routledge. This book was released on 2017-11-01 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the two-stroke cycle internal combustion engine, used in compact, lightweight form in everything from motorcycles to chainsaws to outboard motors, and in large sizes for marine propulsion and power generation. It first provides an overview of the principles, characteristics, applications, and history of the two-stroke cycle engine, followed by descriptions and evaluations of various types of models that have been developed to predict aspects of two-stroke engine operation.

Download or read book The Design and Construction of a Two stroke Cycle Diesel Fuel Injection and Exhaust System written by Edward Walter Yates and published by . This book was released on 1934 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Automotive Spark Ignited Direct Injection Gasoline Engines written by F. Zhao and published by Elsevier. This book was released on 2000-02-08 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of fuel injection, spray atomization and vaporization, charge cooling, mixture preparation and the control of in-cylinder air motion are all being actively researched and this work is reviewed in detail and analyzed. The new technologies such as high-pressure, common-rail, gasoline injection systems and swirl-atomizing gasoline fuel injections are discussed in detail, as these technologies, along with computer control capabilities, have enabled the current new examination of an old objective; the direct-injection, stratified-charge (DISC), gasoline engine. The prior work on DISC engines that is relevant to current GDI engine development is also reviewed and discussed. The fuel economy and emission data for actual engine configurations have been obtained and assembled for all of the available GDI literature, and are reviewed and discussed in detail. The types of GDI engines are arranged in four classifications of decreasing complexity, and the advantages and disadvantages of each class are noted and explained. Emphasis is placed upon consensus trends and conclusions that are evident when taken as a whole; thus the GDI researcher is informed regarding the degree to which engine volumetric efficiency and compression ratio can be increased under optimized conditions, and as to the extent to which unburned hydrocarbon (UBHC), NOx and particulate emissions can be minimized for specific combustion strategies. The critical area of GDI fuel injector deposits and the associated effect on spray geometry and engine performance degradation are reviewed, and important system guidelines for minimizing deposition rates and deposit effects are presented. The capabilities and limitations of emission control techniques and after treatment hardware are reviewed in depth, and a compilation and discussion of areas of consensus on attaining European, Japanese and North American emission standards presented. All known research, prototype and production GDI engines worldwide are reviewed as to performance, emissions and fuel economy advantages, and for areas requiring further development. The engine schematics, control diagrams and specifications are compiled, and the emission control strategies are illustrated and discussed. The influence of lean-NOx catalysts on the development of late-injection, stratified-charge GDI engines is reviewed, and the relative merits of lean-burn, homogeneous, direct-injection engines as an option requiring less control complexity are analyzed.

Download or read book Pumping Station Design written by Garr M. Jones PE DEE and published by Butterworth-Heinemann. This book was released on 2011-04-19 with total page 1099 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pumping Station Design, 3e is an essential reference for all professionals. From the expert city engineer to the new design officer, this book assists those who need to apply the fundamentals of various disciplines and subjects in order to produce a well-integrated pumping station that is reliable, easy to operate and maintain, and free from design mistakes. The depth of experience and expertise of the authors, contributors, and peers reviewing the content as well as the breadth of information in this book is unparalleled, making this the only book of its kind. - An award-winning reference work that has become THE standard in the field - Dispenses expert information on how to produce a well-integrated pumping station that will be reliable, easy to operate and maintain, and free from design mistakes - 60% of the material has been updated to reflect current standards and changes in practice since the book was last published in 1998 - New material added to this edition includes: the latest design information, the use of computers for pump selection, extensive references to Hydraulic Institute Standards and much more!

Download or read book Introduction to Modeling and Control of Internal Combustion Engine Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal combustion engines still have a potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. These goals can be achieved with help of control systems. Modeling and Control of Internal Combustion Engines (ICE) addresses these issues by offering an introduction to cost-effective model-based control system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed in the text and selected feedforward and feedback control problems are discussed. The appendix contains a summary of the most important controller analysis and design methods, and a case study that analyzes a simplified idle-speed control problem. The book is written for students interested in the design of classical and novel ICE control systems.

Download or read book Fuel Injection of a Two Stroke Petrol Engine written by K. E. Nankivell and published by . This book was released on 1976 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: