Download or read book Design of a Decision Support System for a Multi item Single Machine Production System written by Cher-Sern Brian Lin and published by . This book was released on 1984 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 34 (thesis year 1989) a total of 13,377 theses titles from 26 Canadian and 184 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 34 reports theses submitted in 1989, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2005 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Michael F. Zaeh and published by Springer Science & Business Media. This book was released on 2013-09-12 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2013) is "Enabling Manufacturing Competitiveness and Economic Sustainability. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems' economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability, scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented. About the Editor Prof. Dr.-Ing. Michael F. Zaeh, born in 1963, has been and is Professor for and Manufacturing Technology since 2002 and, together with Prof. Dr.-Ing. Gunther Reinhart, Head of the Institute for Machine Tools and Industrial Management (iwb) at the Technische Universitaet Muenchen (TUM). After studying general mechanical engineering, he was doctoral candidate under Prof. Dr.-Ing. Joachim Milberg at TUM from 1990 until 1993 and received his doctorate in 1993. From 1994 to 1995, he was department leader under Prof. Dr.-Ing. Gunther Reinhart. From 1996 to 2002, he worked for a machine tool manufacturer in several positions, most recently as a member of the extended management. Prof. Dr.-Ing. Michael F. Zaeh is an associated member of the CIRP and member of acatech, WGP and WLP. His current researches include among others Joining and Cutting Technologies like Laser Cutting and Welding as well as Friction Stir Welding, Structural Behaviour and Energy Efficiency of Machine Tools and Manufacturing Processes like Additive Manufacturing.
Download or read book TIMS ORSA Bulletin written by Institute of Management Sciences and published by . This book was released on 1994 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing Decision Support Systems written by H. R. Parsaei and published by Springer Science & Business Media. This book was released on 1997 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a forum for research and applications dealing with the design, the development and the implementation of decision support systems in the manufacturing domain. The book brings together contributions from leading experts in the field. It will appeal to all those concerned with decision support for manufacturing.
Download or read book Fusing Decision Support Systems Into the Fabric of the Context written by Ana Respício and published by IOS Press. This book was released on 2012 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of Information Systems has been shifting from an aeimmersion viewAE, which relies on the immersion of information technology (IT) as part of the business environment, to a aefusion viewAE in which IT is fused within the business environment, forming a unified fabric that integrates work and personal life, as well as personal and public information. In the context of this fusion view, decision support systems should achieve a total alignment with the context and the personal preferences of users. The advantage of such a view is an opportunity of seamless integration between enterprise environments and decision support system components. Thus, researchers and practitioners have to address the challenges of dealing with this shift in viewpoint and its consequences for decision making and decision support systems theories and applications. This book presents the latest innovations and advances in decision support systems with a special focus on the fusion view. These achievements will be of interest to all those involved and interested in decision making practice and research, as well as, more generally, in the fusion view of modern information systems.The book covers a wide range of topical themes including a fusion view of business intelligence and data warehousing, applications of multi-criteria decision analysis, intelligent models and technologies for decision making, knowledge management, decision support approaches and models for emergency management, and medical and other specific domains.
Download or read book Novel Industry 4 0 Technologies and Applications written by Nikolaos Papakostas and published by MDPI. This book was released on 2020-11-25 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industry 4.0 paradigm has led to the creation of new opportunities for taking advantage of a set of diverse technologies in the manufacturing domain. This book touches on a series of advanced technologies and research fields, including Internet of Things, Augmented and Virtual Reality, Machine Learning, Advanced Robotics, Additive Manufacturing, System and Process Simulation, Computer-Aided Design/Engineering/Manufacturing/Process Planning Systems as well as Product Lifecycle Management Platforms. The topics covered span a series of diverse areas related to a) product design and development, b) manufacturing systems and operations, c) process engineering, and d) Industry 4.0 technologies review and realization.
Download or read book Analysis Design Evaluation of Man Machine Systems written by G. Mancini and published by Elsevier. This book was released on 2014-06-28 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a valuable overview of human-machine interaction in technological systems, with particular emphasis on recent advances in theory, experimental and analytical research, and applications related to man-machine systems. Topics covered include: Automation and Operator - task analysis, decision support, task allocation, management decision support, supervisory control, artificial intelligence, training and teaching, expert knowledge; System Concept and Design - software ergonomics, fault diagnosis, safety, design concepts; Man-machine Interface - interface design, graphics and vision, user adaptive interfaces; Systems Operation - process industry, electric power, aircraft, surface transport, prostheses and manual control. Contains 53 papers and three discussion sessions.
Download or read book Cooperative Design Visualization and Engineering written by Yuhua Luo and published by Springer. This book was released on 2008-09-22 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 5th International Conference on Cooperative Design, Visualization, and Engineering, CDVE 2008, held in Calvià, Mallorca, Spain, in September 2008. The 45 revised full papers presented were carefully reviewed and selected from numerous submissions. The papers cover all current issues in cooperative design, visualization, and engineering, ranging from theoretical and methodological topics to various systems and frameworks to applications in a variety of fields. The papers are organized in topical segments on cooperative design, cooperative visualization, cooperative engineering, cooperative applications, as well as basic theories, methods and technologies that support CDVE.
Download or read book ICT for a Better Life and a Better World written by Youcef Baghdadi and published by Springer. This book was released on 2019-02-13 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the impact of information and communication technologies (ICTs) on organizations and society as a whole. Specifically, it examines how such technologies improve our lives and facilitate our work. A main aspect explored is how actors understand the potential of ICTs to support organizational activities and hence, how they adopt and adapt these technologies to achieve their goals. The book collects papers on various areas of organizational strategy, e.g. new business models, competitive strategies, knowledge management and more. The main areas dealt with are new technologies for a better life, innovations for e-government, and technologies enhancing enterprise modeling. In addition, the book addresses how organizations impact society through sustainable development and social responsibility, and how ICTs employ social media networks in the process of value co-creation.
Download or read book Marketing Intelligent Systems Using Soft Computing written by Jorge Casillas and published by Springer. This book was released on 2010-10-05 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr. Jay Liebowitz Orkand Endowed Chair in Management and Technology University of Maryland University College Graduate School of Management & Technology 3501 University Boulevard East Adelphi, Maryland 20783-8030 USA jliebowitz@umuc. edu When I first heard the general topic of this book, Marketing Intelligent Systems or what I’ll refer to as Marketing Intelligence, it sounded quite intriguing. Certainly, the marketing field is laden with numeric and symbolic data, ripe for various types of mining—data, text, multimedia, and web mining. It’s an open laboratory for applying numerous forms of intelligentsia—neural networks, data mining, expert systems, intelligent agents, genetic algorithms, support vector machines, hidden Markov models, fuzzy logic, hybrid intelligent systems, and other techniques. I always felt that the marketing and finance domains are wonderful application areas for intelligent systems, and this book demonstrates the synergy between marketing and intelligent systems, especially soft computing. Interactive advertising is a complementary field to marketing where intelligent systems can play a role. I had the pleasure of working on a summer faculty f- lowship with R/GA in New York City—they have been ranked as the top inter- tive advertising agency worldwide. I quickly learned that interactive advertising also takes advantage of data visualization and intelligent systems technologies to help inform the Chief Marketing Officer of various companies. Having improved ways to present information for strategic decision making through use of these technologies is a great benefit.
Download or read book Production Management written by Yacob Khojasteh and published by CRC Press. This book was released on 2017-11-07 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inventory control is an essential task in production management. An effective inventory control can significantly reduce the holding cost and hence, total production cost. Selecting and implementing a suitable production control system plays an important role in inventory reduction and performance improvement of a production system. Since the introduction of Toyota’s just-in-time philosophy, pull control systems have been adopted by numerous companies worldwide, both in the manufacturing and service sectors. This book provides some recent developments in production management and presents modeling and analysis tools for pull production control systems. It contributes by combining theoretical findings and case study analysis results with a practical and contemporary view on how to effectively manage and control production systems. Each chapter in this book focuses on a specific topic in production control systems, allowing readers to identify the chapters that relate to their interests. More specifically, the book is presented in three sections. The first section focuses on the design and implementation aspects of the pull production control systems, as well as performance evaluation approaches for pull systems. The second section presents a recent and comprehensive literature review. Three different case studies on implementation of pull production control systems are presented in the last section. This book can be used as an essential source for students and scholars who need to specifically study the pull control systems. Since the superiority of these systems is controversial, the book can also provide an interesting and informative read for practitioners, managers, and employees who need to deepen their knowledge on pull production management systems.
Download or read book Encyclopedia of Decision Making and Decision Support Technologies written by Adam, Frederic and published by IGI Global. This book was released on 2008-04-30 with total page 1019 pages. Available in PDF, EPUB and Kindle. Book excerpt: As effective organizational decision making is a major factor in a company's success, a comprehensive account of current available research on the core concepts of the decision support agenda is in high demand by academicians and professionals. Through 110 authoritative contributions by over 160 of the world's leading experts the Encyclopedia of Decision Making and Decision Support Technologies presents a critical mass of research on the most up-to-date research on human and computer support of managerial decision making, including discussion on support of operational, tactical, and strategic decisions, human vs. computer system support structure, individual and group decision making, and multi-criteria decision making.
Download or read book Collaborative Decision Making written by Pascale Zaraté and published by IOS Press. This book was released on 2008 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents the latest innovations and achievements of academic communities on Decision Support Systems (DSS). These advances include theory systems, computer-aided methods, algorithms, techniques and applications related to supporting decision making. The aim is to develop approaches for applying information systems technology to increase the effectiveness of decision making in situations where the computer system can support and enhance human judgements in the performance of tasks that have elements which cannot be specified in advance. Also it is intended to improve ways of synthesizing and applying relevant work from resource disciplines to practical implementation of systems that enhance decision support capability. The resource disciplines include: information technology, artificial intelligence, cognitive psychology, decision theory, organizational theory, operations research and modeling. Researchers come from the Operational Research area but also from Decision Theory, Multicriteria Decision Making methodologies, Fuzzy sets and modeling tools. Based on the introduction of Information and Communication Technologies in organizations, the decisional process is evolving from a mono actor to a multi actor situation in which cooperation is a way to make the decision.
Download or read book Industrial Applications of Holonic and Multi Agent Systems written by Vladimír Mařík and published by Springer. This book was released on 2015-08-10 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 7th International Conference on Industrial Applications of Holonic and Multi-Agent Systems, HoloMAS 2015, held in Valencia, Spain, in September 2015. The 19 revised full papers presented together with one invited talk were carefully reviewed and selected from 27 submissions. The papers are organized in the following topical sections: surveys, conceptual design and validation, digital factories and manufacturing control systems, ARUM: adaptive production management, and smart grids, complex networks and big data.
Download or read book Systems Engineering Management Guide written by and published by . This book was released on 1990 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:
