Download or read book Design Modeling and Control of Nanopositioning Systems written by Andrew J. Fleming and published by Springer. This book was released on 2014-05-15 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the complete design cycle of nanopositioning systems, this is the first comprehensive text on the topic. The book first introduces concepts associated with nanopositioning stages and outlines their application in such tasks as scanning probe microscopy, nanofabrication, data storage, cell surgery and precision optics. Piezoelectric transducers, employed ubiquitously in nanopositioning applications are then discussed in detail including practical considerations and constraints on transducer response. The reader is then given an overview of the types of nanopositioner before the text turns to the in-depth coverage of mechanical design including flexures, materials, manufacturing techniques, and electronics. This process is illustrated by the example of a high-speed serial-kinematic nanopositioner. Position sensors are then catalogued and described and the text then focuses on control. Several forms of control are treated: shunt control, feedback control, force feedback control and feedforward control (including an appreciation of iterative learning control). Performance issues are given importance as are problems limiting that performance such as hysteresis and noise which arise in the treatment of control and are then given chapter-length attention in their own right. The reader also learns about cost functions and other issues involved in command shaping, charge drives and electrical considerations. All concepts are demonstrated experimentally including by direct application to atomic force microscope imaging. Design, Modeling and Control of Nanopositioning Systems will be of interest to researchers in mechatronics generally and in control applied to atomic force microscopy and other nanopositioning applications. Microscope developers and mechanical designers of nanopositioning devices will find the text essential reading.

Download or read book Advanced Control of Piezoelectric Micro Nano Positioning Systems written by Qingsong Xu and published by Springer. This book was released on 2015-08-28 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores emerging methods and algorithms that enable precise control of micro-/nano-positioning systems. The text describes three control strategies: hysteresis-model-based feedforward control and hysteresis-model-free feedback control based on and free from state observation. Each paradigm receives dedicated attention within a particular part of the text. Readers are shown how to design, validate and apply a variety of new control approaches in micromanipulation: hysteresis modelling, discrete-time sliding-mode control and model-reference adaptive control. Experimental results are provided throughout and build up to a detailed treatment of practical applications in the fourth part of the book. The applications focus on control of piezoelectric grippers. Advanced Control of Piezoelectric Micro-/Nano-Positioning Systems will assist academic researchers and practising control and mechatronics engineers interested in suppressing sources of nonlinearity such as hysteresis and drift when combining position and force control of precision systems with piezoelectric actuation.

Download or read book Advances in Mechanism Machine Science and Engineering in China written by Xinjun Liu and published by Springer Nature. This book was released on 2023-05-31 with total page 2228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the conference proceedings of the 23rd IFToMM China International Conference on Mechanism and Machine Science & Engineering (IFToMM CCMMS 2022). CCMMS was initiated in 1982, and it is the most important forum held in China for the exchange of research ideas, presentation of technical and scientific achievements, and discussion of future directions in the field of mechanism and machine science. The topics include parallel/hybrid mechanism synthesis and analysis, theoretical & computational kinematics, compliant mechanisms and micro/nano-mechanisms, reconfigurable and metamorphic mechanisms, space structures, mechanisms and materials, structure adaptation in space environment and ground testing, large-scale membrane deployable structures, construction and application of super-scale space systems, cams, gears and combining mechanisms, fluid power mechatronics drivetrain, mechanical design theory and methods, dynamics and vibration control, mechatronics, biologically inspired mechanisms and robotics, medical & rehabilitation robotics, mobile robotics, soft robotics, heavy non-road mobile machine, robot applications, engineering education on mechanisms, machines, and robotics. This book provides a state-of-the-art overview of current advances in mechanism and machine science in China. The inspiring ideas presented in the papers enlighten academic research and industrial application. The potential readers include academic researchers and industrial professionals in mechanism and machine science.

Download or read book Intelligent Robotics and Applications written by Honghai Liu and published by Springer. This book was released on 2015-08-19 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three volume set LNAI 9244, 9245, and 9246 constitutes the refereed proceedings of the 8th International Conference on Intelligent Robotics and Applications, ICIRA 2015, held in Portsmouth, UK, in August 2015. The 61 papers included in the second volume are organized in topical sections on man-machine interaction; robot design, development and control; navigation and planning; robot motion analysis and planning; medical robot; prototyping; and manufacturing.

Download or read book Design and Implementation of Large Range Compliant Micropositioning Systems written by Qingsong Xu and published by John Wiley & Sons. This book was released on 2017-05-01 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: An innovative and timely guide to the modeling, design and implementation of large-range compliant micropositioning systems based on flexure hinges Features innovative compact mechanism designs for large-range translational and rotational positioning Provides original and concise treatment of various flexure hinges with well-presented design and control methods Focuses on design implementation and applications through detailed examples

Download or read book Nanopositioning Technologies written by Changhai Ru and published by Springer. This book was released on 2015-12-22 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the state-of-the-art technologies for positioning with nanometer resolutions and accuracies, particularly those based on piezoelectric actuators and MEMS actuators. The latest advances are described, including the design of nanopositioning devices, sensing and actuation technologies and control methods for nanopositioning. This is an ideal book for mechanical and electrical engineering students and researchers; micro and nanotechnology researchers and graduate students; as well as those working in the precision instrumentation or semiconductor industries.

Download or read book Mechatronics and Robotics written by Marina Indri and published by CRC Press. This book was released on 2020-11-24 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term “mechatronics” was coined in 1969, merging “mecha” from mechanism and “tronics” from electronics, to reflect the original idea at the basis of this discipline, that is, the integration of electrical and mechanical systems into a single device. The spread of this term, and of mechatronics itself, has been growing in the years, including new aspects and disciplines, like control engineering, computer engineering and communication/information engineering. Nowadays mechatronics has a well-defined and fundamental role, in strict relation with robotics. Drawing a sharp border between mechatronics and robotics is impossible, as they share many technologies and objectives. Advanced robots could be defined as mechatronic devices equipped with a “smart brain”, but there are also up-to-date mechatronic devices, used in tight interaction with humans, that are governed by smart architectures (for example, for safety purposes). Aim of this book is to offer a wide overview of new research trends and challenges for both mechatronics and robotics, through the contribution of researchers from different institutions, providing their view on specific subjects they consider as “hot topics” in both fields, with attention to new fields of application, new challenges to the research communities and new technologies available. The reader of this book will enjoy the various contributions, as they have been prepared with actual applications in mind, along a journey from advanced actuators and sensors to human-robot interaction, through robot control, navigation, planning and programming issues. The book presents several state-of-the-art solutions, like multiple-stage actuation to cope with conflicting specification of large motion-spans, ultra-high accuracy, model-based control for high-tech mechatronic systems, modern approaches of software systems engineering to robotics, aand humanoids for human assistance. The reader can also find new techniques in approaching the design of mechatronic systems in some possible industrial and service robotics scenarios, with a particular attention for the interaction between humans and mechanisms.

Download or read book Handbook of Systems Engineering and Risk Management in Control Systems Communication Space Technology Missile Security and Defense Operations written by Anna M. Doro-on and published by CRC Press. This book was released on 2022-09-27 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides multifaceted components and full practical perspectives of systems engineering and risk management in security and defense operations with a focus on infrastructure and manpower control systems, missile design, space technology, satellites, intercontinental ballistic missiles, and space security. While there are many existing selections of systems engineering and risk management textbooks, there is no existing work that connects systems engineering and risk management concepts to solidify its usability in the entire security and defense actions. With this book Dr. Anna M. Doro-on rectifies the current imbalance. She provides a comprehensive overview of systems engineering and risk management before moving to deeper practical engineering principles integrated with newly developed concepts and examples based on industry and government methodologies. The chapters also cover related points including design principles for defeating and deactivating improvised explosive devices and land mines and security measures against kinds of threats. The book is designed for systems engineers in practice, political risk professionals, managers, policy makers, engineers in other engineering fields, scientists, decision makers in industry and government and to serve as a reference work in systems engineering and risk management courses with focus on security and defense operations.

Download or read book Modeling and Control of Precision Actuators written by Tan Kok Kiong and published by CRC Press. This book was released on 2018-10-08 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Control of Precision Actuators explores new technologies that can ultimately be applied in a myriad of industries. It covers dynamical analysis of precise actuators and strategies of design for various control applications. The book addresses four main schemes: modeling and control of precise actuators; nonlinear control of precise actuators, including sliding mode control and neural network feedback control; fault detection and fault-tolerant control; and advanced air bearing control. It covers application issues in the modeling and control of precise actuators, providing several interesting case studies for more application-oriented readers. Introduces the driving forces behind precise actuators Describes nonlinear dynamics of precise actuators and their mathematical forms, including hysteresis, creep, friction, and force ripples Presents the control strategies for precise actuators based on Preisach model as well as creep dynamics Develops relay feedback techniques for identifying nonlinearities such as friction and force ripples Discusses a MPC approach based on piecewise affine models which emulate the frictional effects in the precise actuator Covers the concepts of air bearing stages with the corresponding control method Provides a set of schemes suitable for fault detection and accommodation control of mechanical systems Emphasizing design theory and control strategies, the book includes simulation and practical examples for each chapter; covers precise actuators such as piezo motors, coil motors, air bearing motors, and linear motors; discusses integration among different technologies; and includes three case studies in real projects. The book concludes by linking design methods and their applications, emphasizing the key issues involved and how to implement the precision motion control tasks in a practical system. It provides a concise and comprehensive source of the state-of-the-art developments and results for modeling and control of precise actuators.

Download or read book Dynamic Systems and Control Engineering written by Nader Jalili and published by Cambridge University Press. This book was released on 2023-05-31 with total page 947 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern treatment of modeling, analysis and control, covering fundamental theory, practical implementation, and advanced strategies.

Download or read book Ionic Polymer Metal Composites IMPCs written by Mohsen Shahinpoor and published by Royal Society of Chemistry. This book was released on 2016 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive resource on ionic polymer metal composites (IPMCs) edited by the leading authority on the subject.

Download or read book Control Theory for Physicists written by John Bechhoefer and published by Cambridge University Press. This book was released on 2021-04-01 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control theory, an interdisciplinary concept dealing with the behaviour of dynamical systems, is an important but often overlooked aspect of physics. This is the first broad and complete treatment of the topic tailored for physicists, one which goes from the basics right through to the most recent advances. Simple examples develop a deep understanding and intuition for the systematic principles of control theory, beyond the recipes given in standard engineering-focused texts. Up-to-date coverage of control of networks and complex systems, and a thorough discussion of the fundamental limits of control, including the limitations placed by causality, information theory, and thermodynamics are included. In addition it explores important recent advances in stochastic thermodynamics on the thermodynamic costs of information processing and control. For all students of physics interested in control theory, this classroom-tested, comprehensive approach to the topic with online solutions and further materials delivers both fundamental principles and current developments.

Download or read book Feedback Systems written by Karl Johan Åström and published by Princeton University Press. This book was released on 2021-02-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential introduction to the principles and applications of feedback systems—now fully revised and expanded This textbook covers the mathematics needed to model, analyze, and design feedback systems. Now more user-friendly than ever, this revised and expanded edition of Feedback Systems is a one-volume resource for students and researchers in mathematics and engineering. It has applications across a range of disciplines that utilize feedback in physical, biological, information, and economic systems. Karl Åström and Richard Murray use techniques from physics, computer science, and operations research to introduce control-oriented modeling. They begin with state space tools for analysis and design, including stability of solutions, Lyapunov functions, reachability, state feedback observability, and estimators. The matrix exponential plays a central role in the analysis of linear control systems, allowing a concise development of many of the key concepts for this class of models. Åström and Murray then develop and explain tools in the frequency domain, including transfer functions, Nyquist analysis, PID control, frequency domain design, and robustness. Features a new chapter on design principles and tools, illustrating the types of problems that can be solved using feedback Includes a new chapter on fundamental limits and new material on the Routh-Hurwitz criterion and root locus plots Provides exercises at the end of every chapter Comes with an electronic solutions manual An ideal textbook for undergraduate and graduate students Indispensable for researchers seeking a self-contained resource on control theory

Download or read book Modeling Design and Simulation of Systems written by Mohamed Sultan Mohamed Ali and published by Springer. This book was released on 2017-08-24 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set CCIS 751 and CCIS 752 constitutes the proceedings of the 17th Asia Simulation Conference, AsiaSim 2017, held in Malacca, Malaysia, in August/September 2017. The 124 revised full papers presented in this two-volume set were carefully reviewed and selected from 267 submissions. The papers contained in these proceedings address challenging issues in modeling and simulation in various fields such as embedded systems; symbiotic simulation; agent-based simulation; parallel and distributed simulation; high performance computing; biomedical engineering; big data; energy, society and economics; medical processes; simulation language and software; visualization; virtual reality; modeling and Simulation for IoT; machine learning; as well as the fundamentals and applications of computing.

Download or read book IAENG Transactions on Engineering Sciences written by Ao Sio-iong and published by World Scientific. This book was released on 2017-11-17 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two large international conferences on Advances in Engineering Sciences were held in London, UK, 29 June - 1 July, 2016, under the World Congress on Engineering (WCE 2016), and San Francisco, USA, 19-21 October, 2016, under the World Congress on Engineering and Computer Science (WCECS 2016) respectively. This volume contains 42 revised and extended research articles written by prominent researchers participating in the conferences. Topics covered include electrical engineering, manufacturing engineering, industrial engineering, computer science, engineering mathematics and industrial applications. The book offers state-of-the-art advances in engineering sciences and also serves as an excellent reference work for researchers and graduate students working with/on engineering sciences.

Download or read book Modeling and Control for Micro Nano Devices and Systems written by Ning Xi and published by CRC Press. This book was released on 2017-12-19 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro/nano-scale engineering—especially the design and implementation of ultra-fast and ultra-scale energy devices, sensors, and cellular and molecular systems—remains a daunting challenge. Modeling and control has played an essential role in many technological breakthroughs throughout the course of history. Therefore, the need for a practical guide to modeling and control for micro/nano-scale devices and systems has emerged. The first edited volume to address this rapidly growing field, Modeling and Control for Micro/Nano Devices and Systems gives control engineers, lab managers, high-tech researchers, and graduate students easy access to the expert contributors’ cutting-edge knowledge of micro/nanotechnology, energy, and bio-systems. The editors offer an integrated view from theory to practice, covering diverse topics ranging from micro/nano-scale sensors to energy devices and control of biology systems in cellular and molecular levels. The book also features numerous case studies for modeling of micro/nano devices and systems, and explains how the models can be used for control and optimization purposes. Readers benefit from learning the latest modeling techniques for micro/nano-scale devices and systems, and then applying those techniques to their own research and development efforts.

Download or read book Smart Materials Based Actuators at the Micro Nano Scale written by Micky Rakotondrabe and published by Springer Science & Business Media. This book was released on 2013-06-28 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Materials-Based Actuators at the Micro/Nano-Scale: Characterization, Control, and Applications gives a state of the art of emerging techniques to the characterization and control of actuators based on smart materials working at the micro/nano scale. The book aims to characterize some commonly used structures based on piezoelectric and electroactive polymeric actuators and also focuses on various and emerging techniques employed to control them. This book also includes two of the most emerging topics and applications: nanorobotics and cells micro/nano-manipulation.