Download or read book Steel Fiber Reinforced Concrete written by Harvinder Singh and published by Springer. This book was released on 2016-10-26 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses design aspects of steel fiber-reinforced concrete (SFRC) members, including the behavior of the SFRC and its modeling. It also examines the effect of various parameters governing the response of SFRC members in detail. Unlike other publications available in the form of guidelines, which mainly describe design methods based on experimental results, it describes the basic concepts and principles of designing structural members using SFRC as a structural material, predominantly subjected to flexure and shear. Although applications to special structures, such as bridges, retaining walls, tanks and silos are not specifically covered, the fundamental design concepts remain the same and can easily be extended to these elements. It introduces the principles and related theories for predicting the role of steel fibers in reinforcing concrete members concisely and logically, and presents various material models to predict the response of SFRC members in detail. These are then gradually extended to develop an analytical flexural model for the analysis and design of SFRC members. The lack of such a discussion is a major hindrance to the adoption of SFRC as a structural material in routine design practice. This book helps users appraise the role of fiber as reinforcement in concrete members used alone and/or along with conventional rebars. Applications to singly and doubly reinforced beams and slabs are illustrated with examples, using both SFRC and conventional reinforced concrete as a structural material. The influence of the addition of steel fibers on various mechanical properties of the SFRC members is discussed in detail, which is invaluable in helping designers and engineers create optimum designs. Lastly, it describes the generally accepted methods for specifying the steel fibers at the site along with the SFRC mixing methods, storage and transport and explains in detail methods to validate the adopted design. This book is useful to practicing engineers, researchers, and students.

Download or read book Fibre reinforced concrete From design to structural applications written by FIB - Féd. Int. du Béton and published by FIB - Féd. Int. du Béton. This book was released on 2016 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The FRC-2014 Workshop Fibre Reinforced Concrete: from Design to Structural Applications was the first ACI-fib joint technical event. The Workshop, held at Polytechnique Montreal (Canada) on July 24th and 25th 2014, was attended by 116 participants from 25 countries and 4 continents. The first international FRC workshop was held in Bergamo (Italy) in 2004. At that time, the lack of specific building codes and standards was identified as the main inhibitor to the application of this technology in engineering practice. Ten years after Bergamo, many of the objectives identified at that time have been achieved. The use of fibre reinforced concrete (FRC) for designing structural members in bending and shear has recently been addressed in the fib Model Code 2010. Steel fibre reinforced concrete (SFRC) has also been used structurally in several building and bridge projects in Europe and North-America. SFRC has been widely used in segmental tunnel linings all over the world. Members of ACI544 and fib TG-4.1 have been involved in writing code based specifications for the design of FRC structural members. More than fifty papers were presented at the Workshop from which forty-four were selected for this joint ACI/fib publication. The papers are organised in the document under six themes: Design guidelines and specifications, Material properties for design, Behaviour and design of beams and columns, Behaviour and design of slabs and other structures, Behaviour and design of foundations and underground components, and finally, Applications in structure and underground construction projects.

Download or read book Fibre Reinforced Concrete From Design to Structural Applications written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 2020-08-01 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first international FRC workshop supported by RILEM and ACI was held in Bergamo (Italy) in 2004. At that time, a lack of specific building codes and standards was identified as the main inhibitor to the application of this technology in engineering practice. The workshop aim was placed on the identification of applications, guidelines, and research needs in order for this advanced technology to be transferred to professional practice. The second international FRC workshop, held in Montreal (Canada) in 2014, was the first ACI-fib joint technical event. Many of the objectives identified in 2004 had been achieved by various groups of researchers who shared a common interest in extending the application of FRC materials into the realm of structural engineering and design. The aim of the workshop was to provide the State-of-the-Art on the recent progress that had been made in term of specifications and actual applications for buildings, underground structures, and bridge projects worldwide. The rapid development of codes, the introduction of new materials and the growing interest of the construction industry suggested presenting this forum at closer intervals. In this context, the third international FRC workshop was held in Desenzano (Italy), four years after Montreal. In this first ACI-fib-RILEM joint technical event, the maturity gained through the recent technological developments and large-scale applications were used to show the acceptability of the concrete design using various fibre compositions. The growing interests of civil infrastructure owners in ultra-high-performance fibre-reinforced concrete (UHPFRC) and synthetic fibres in structural applications bring new challenges in terms of concrete technology and design recommendations. In such a short period of time, we have witnessed the proliferation of the use of fibres as structural reinforcement in various applications such as industrial floors, elevated slabs, precast tunnel lining sections, foundations, as well as bridge decks. We are now moving towards addressing many durability-based design requirements by the use of fibres, as well as the general serviceability-based design. However, the possibility of having a residual tensile strength after cracking of the concrete matrix requires a new conceptual approach for a proper design of FRC structural elements. With such a perspective in mind, the aim of FRC2018 workshop was to provide the State-of-the-Art on the recent progress in terms of specifications development, actual applications, and to expose users and researchers to the challenges in the design and construction of a wide variety of structural applications. Considering that at the time of the first workshop, in 2004, no structural codes were available on FRC, we have to recognize the enormous work done by researchers all over the world, who have presented at many FRC events, and convinced code bodies to include FRC among the reliable alternatives for structural applications. This will allow engineers to increasingly utilize FRC with confidence for designing safe and durable structures. Many presentations also clearly showed that FRC is a promising material for efficient rehabilitation of existing infrastructure in a broad spectrum of repair applications. These cases range from sustained gravity loads to harsh environmental conditions and seismic applications, which are some of the broadest ranges of applications in Civil Engineering. The workshop was attended by researchers, designers, owner and government representatives as well as participants from the construction and fibre industries. The presence of people with different expertise provided a unique opportunity to share knowledge and promote collaborative efforts. These interactions are essential for the common goal of making better and sustainable constructions in the near future. The workshop was attended by about 150 participants coming from 30 countries. Researchers from all the continents participated in the workshop, including 24 Ph.D. students, who brought their enthusiasm in FRC structural applications. For this reason, the workshop Co-chairs sincerely thank all the enterprises that sponsored this event. They also extend their appreciation for the support provided by the industry over the last 30 years which allowed research centers to study FRC materials and their properties, and develop applications to making its use more routine and accepted throughout the world. Their important contribution has been essential for moving the knowledge base forward. Finally, we appreciate the enormous support received from all three sponsoring organizations of ACI, fib and Rilem and look forward to paving the path for future collaborations in various areas of common interest so that the developmental work and implementation of new specifications and design procedures can be expedited internationally.

Download or read book Fibre Reinforced Concrete Improvements and Innovations II written by Pedro Serna and published by Springer Nature. This book was released on 2021-09-04 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of fibre-reinforced concrete (FRC), as presented by scientists and engineers at the RILEM-fib X International Symposium on Fibre Reinforced Concrete (BEFIB), held in Valencia, Spain, on September 20-22, 2021. It discusses a diverse range of topics concerning FRC: technological aspects, nanotechnologies related with FRC, mechanical properties, long-term properties, analytical and numerical models, structural design, codes and standards, quality control, case studies, Textile-Reinforced Concrete, Geopolymers and UHPFRC. After the symposium postponement in 2020, this new volume concludes the publication of the research works and knowledge of FRC in the frame of BEFIB from 2020 to 2021 with the successful celebration of the hybrid symposium BEFIB 2021. The contributions present traditional and new ideas that will open novel research directions and foster multidisciplinary collaboration between different specialists.

Download or read book Fibrous and Composite Materials for Civil Engineering Applications written by R Fangueiro and published by Elsevier. This book was released on 2011-04-19 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of fibrous materials in civil engineering, both as structural reinforcement and in non-structural applications such as geotextiles, is an important and interesting development. Fibrous and composite materials for civil engineering applications analyses the types and properties of fibrous textile and structures and their applications in reinforcement and civil engineering.Part one introduces different types of fibrous textiles and structures. Chapters cover the properties of natural and man-made fibres and of yarns, as well as an overview of textile structures. Part two focuses on fibrous material use in concrete reinforcement, with chapters on the properties and applications of steel fibre reinforced concrete, natural fibre reinforced concrete and the role of fibre reinforcement in mitigating shrinkage cracks. In part three, the applications of fibrous material-based composites in civil engineering are covered. Chapters concentrate on production techniques and applications such as reinforcement of internal structures, structural health monitoring and textile materials in architectural membranes.With its distinguished editor and international team of contributors, Fibrous and composite materials for civil engineering applications is a standard reference for fabric and composite manufacturers, civil engineers and professionals, as well as academics with a research interest in this field. - Explores the development of fibrous materials in civil engineering, both as structural reinforcement and in non-structural applications such as geotextiles - Key topics include short fibre reinforced concrete, natural fibre reinforced concrete and high performance fibre reinforced cementitious composites - A standard reference for fabric and composite manufacturers, civil engineers and professionals, as well as academics with a research interest in this field

Download or read book fib Model Code for Concrete Structures 2010 written by fib - federation internationale du beton and published by John Wiley & Sons. This book was released on 2013-12-04 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Federation for Structural Concrete (fib) is a pre-normative organization. 'Pre-normative' implies pioneering work in codification. This work has now been realized with the fib Model Code 2010. The objectives of the fib Model Code 2010 are to serve as a basis for future codes for concrete structures, and present new developments with regard to concrete structures, structural materials and new ideas in order to achieve optimum behaviour. The fib Model Code 2010 is now the most comprehensive code on concrete structures, including their complete life cycle: conceptual design, dimensioning, construction, conservation and dismantlement. It is expected to become an important document for both national and international code committees, practitioners and researchers. The fib Model Code 2010 was produced during the last ten years through an exceptional effort by Joost Walraven (Convener; Delft University of Technology, The Netherlands), Agnieszka Bigaj-van Vliet (Technical Secretary; TNO Built Environment and Geosciences, The Netherlands) as well as experts out of 44 countries from five continents.

Download or read book Rehabilitation of Concrete Structures with Fiber Reinforced Polymer written by Riadh Al-Mahaidi and published by Butterworth-Heinemann. This book was released on 2018-11-12 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rehabilitation of Concrete Structures with Fiber Reinforced Polymer is a complete guide to the use of FRP in flexural, shear and axial strengthening of concrete structures. Through worked design examples, the authors guide readers through the details of usage, including anchorage systems, different materials and methods of repairing concrete structures using these techniques. Topics include the usage of FRP in concrete structure repair, concrete structural deterioration and rehabilitation, methods of structural rehabilitation and strengthening, a review of the design basis for FRP systems, including strengthening limits, fire endurance, and environmental considerations. In addition, readers will find sections on the strengthening of members under flexural stress, including failure modes, design procedures, examples and anchorage detailing, and sections on shear and torsion stress, axial strengthening, the installation of FRP systems, and strengthening against extreme loads, such as earthquakes and fire, amongst other important topics. - Presents worked design examples covering flexural, shear, and axial strengthening - Includes complete coverage of FRP in Concrete Repair - Explores the most recent guidelines (ACI440.2, 2017; AS5100.8, 2017 and Concrete society technical report no. 55, 2012)

Download or read book From Design to Structural Applications written by Fausto Minelli and published by . This book was released on 2018 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Steel Fibre Reinforced Concrete written by Bernhard Maidl and published by Ernst & Sohn. This book was released on 1995-07-14 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel fibre reinforced concrete is a material with guaranteed tensile strength, outstanding working capacity under static and dynamic loads and a technically effective crack distribution. This building material lends itself therefore to numerous possibilities of application in structural engineering. This book covers fibre types, concrete composition, properties and areas of application of steel fibre reinforced concrete. Particular attention is given to tunneling, mining, other fields of geotechnics, and structural repair. The book also presents design rules and existing regulations, as well as equipment and methods for the installation of the material. In addition, it examines cost considerations and economic feasibility, and provides an outlook on future development in this field. The examples given in the book facilitate training in this field.

Download or read book PRO 39 6th International RILEM Symposium on Fibre Reinforced Concretes FRC BEFIB 2004 Volume 1 written by Marco Di Prisco and published by RILEM Publications. This book was released on 2004 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Materials written by Harvinder Singh and published by Springer Nature. This book was released on 2021-06-29 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the properties, characterization procedures, and analysis techniques of various structural materials. It presents the latest design considerations and uses of engineering materials as well as theories for fully understanding them through numerous worked mathematical examples. The book gradually builds the concept of materials and the principles of material classifications and their response to different physical disturbances, and finally, about the selection methods based upon the test results of the standard methods to choose appropriate materials for various engineering applications. The principles and related theories predicting the response of different structural materials are introduced in a concise and logical manner. A number of illustrations and examples are also given in all chapters for the help of potential readers. The book will be useful for practicing engineers, researchers, and students in the area of civil engineering, especially structural engineering and allied fields.

Download or read book Proceedings fib Symposium in Dubrovnik Croatia written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 2007-05-01 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fibre Reinforced Cementitious Composites Second Edition written by Arnon Bentur and published by CRC Press. This book was released on 2006-11-22 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced cementitious composites can be designed to have outstanding combinations of strength (five to ten times that of conventional concrete) and energy absorption capacity (up to 1000 times that of plain concrete). This second edition brings together in one volume the latest research developments in this rapidly expanding area. The book is split into two parts. The first part is concerned with the mechanics of fibre reinforced brittle matrices and the implications for cementitious systems. In the second part the authors describe the various types of fibre-cement composites, discussing production processes, mechanical and physical properties, durability and applications. Two new chapters have been added, covering fibre specification and structural applications. Fibre Reinforced Cementitious Composites will be of great interest to practitioners involved in modern concrete technology and will also be of use to academics, researchers and graduate students.

Download or read book Advances in Cement Based Materials written by Gideon P.A.G. Van Zijl and published by CRC Press. This book was released on 2009-11-02 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected papers on current advances in high performance construction materials. Contributions deal with the development, characterization, application procedures, performance and structural design of materials with key potential in civil engineering works. Materials treated are fibre reinforced concrete, high performance concrete, sel

Download or read book Expanding Underground Knowledge and Passion to Make a Positive Impact on the World written by Georgios Anagnostou and published by CRC Press. This book was released on 2023-04-12 with total page 3529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanding Underground - Knowledge and Passion to Make a Positive Impact on the World contains the contributions presented at the ITA-AITES World Tunnel Congress 2023 (Athens, Greece, 12 – 18 May, 2023). Tunnels and underground space are a predominant engineering practice that can provide sustainable, cost-efficient and environmentally friendly solutions to the ever-growing needs of modern societies. This underground expansion in more diverse and challenging infrastructure types or to novel underground uses can foster the changes needed. At the same time, the tunneling and underground space community needs to be better prepared and equipped with knowledge, tools and experience, to deal with the prevailing conditions, to successfully challenge and overcome adversities on this path. The papers in this book aim at contributing to the analysis of challenging conditions, the presentation and dissemination good practices, the introduction of new concepts, new tools and innovative elements that can help engineers and all stakeholders to reach their end goals. Expanding Underground - Knowledge and Passion to Make a Positive Impact on the World covers a wide range of aspects and topics related to the whole chain of the construction and operation of underground structures: Knowledge and Passion to Expand Underground for Sustainability and Resilience Geological, Geotechnical Site Investigation and Ground Characterization Planning and Designing of Tunnels and Underground Structures Mechanised Tunnelling and Microtunnelling Conventional Tunnelling, Drill-and-Blast Applications Tunnelling in Challenging Conditions - Case Histories and Lessons Learned Innovation, Robotics and Automation BIM, Big Data and Machine Learning Applications in Tunnelling Safety, Risk and Operation of Underground Infrastructure, and Contractual Practices, Insurance and Project Management The book is a must-have reference for all professionals and stakeholders involved in tunneling and underground space development projects.

Download or read book 3rd fib Congress Washington USA written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 2010-06-01 with total page 5718 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bridge Safety Maintenance Management Life Cycle Resilience and Sustainability written by Joan Ramon Casas and published by CRC Press. This book was released on 2022-06-27 with total page 2646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridge Safety, Maintenance, Management, Life-Cycle, Resilience and Sustainability contains lectures and papers presented at the Eleventh International Conference on Bridge Maintenance, Safety and Management (IABMAS 2022, Barcelona, Spain, 11–15 July, 2022). This e-book contains the full papers of 322 contributions presented at IABMAS 2022, including the T.Y. Lin Lecture, 4 Keynote Lectures, and 317 technical papers from 36 countries all around the world. The contributions deal with the state-of-the-art as well as emerging concepts and innovative applications related to the main aspects of safety, maintenance, management, life-cycle, resilience, sustainability and technological innovations of bridges. Major topics include: advanced bridge design, construction and maintenance approaches, safety, reliability and risk evaluation, life-cycle management, life-cycle, resilience, sustainability, standardization, analytical models, bridge management systems, service life prediction, structural health monitoring, non-destructive testing and field testing, robustness and redundancy, durability enhancement, repair and rehabilitation, fatigue and corrosion, extreme loads, needs of bridge owners, whole life costing and investment for the future, financial planning and application of information and computer technology, big data analysis and artificial intelligence for bridges, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of making more rational decisions on bridge safety, maintenance, management, life-cycle, resilience and sustainability of bridges for the purpose of enhancing the welfare of society. The volume serves as a valuable reference to all concerned with and/or involved in bridge structure and infrastructure systems, including students, researchers and practitioners from all areas of bridge engineering.