Download or read book Design Generation and Tooth Contact Analysis TCA of Asymmetric Face Gear Drive With Modified Geometry written by and published by . This book was released on 2001 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new type of face gear drive for application in transmissions, particularly in helicopters, has been developed. The new geometty differs from the existing geometry by application of asymmetric profiles and double-crowned pinion of the face gear mesh. The paper describes the computerized design, simulation of meshing and contact, and stress analysis by finite element method. Special purpose computer codes have been developed to conduct the analysis. The analysis of this new type of face gear is illustrated with a numerical example.
Download or read book Theory and Practice of Gearing and Transmissions written by Veniamin Goldfarb and published by Springer. This book was released on 2015-08-26 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together papers from all spheres of mechanical engineering related to gears and transmissions, from fundamentals to advanced applications, from academic results in numerical and experimental research, to new approaches to gear design and aspects of their optimization synthesis and to the latest developments in manufacturing. Furthermore, this volume honours the work of Faydor L. Litvin on the 100th anniversary of this birth. He is acknowledged as the founder of the modern theory of gearing. An exhaustive list of his contributions and achievements and a biography are included.
Download or read book Asymmetric Gearing written by Alexander L. Kapelevich and published by CRC Press. This book was released on 2018-08-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The history of gears with asymmetric teeth is not sufficiently recorded in modern gear literature, with some gear researchers concluding that asymmetric tooth gears were discovered just several decades ago. This book sheds light upon the origins and state of asymmetric gearing, referencing technical articles from the 19th, 20th, and 21st centuries. As a practicing gear engineer with over 40 years’ experience, author Alexander L. Kapelevich has successfully implemented asymmetric gears in a variety of custom gear transmissions. This book addresses all aspects of asymmetric gear development, including theoretical fundamentals; tooth geometry optimization; stress analysis and rating; design and production specifics; analytical and experimental comparison to the best symmetric gears; and application examples. Readers are encouraged to look beyond the status quo established by traditional gear design, and to apply principles of asymmetric gearing to actual gear design. Optimal solutions are presented for gear drives that will maximize technical performance and marketability. Features Presents a state-of the-art, comprehensive historical overview of asymmetric gearing Explains the Direct Gear Design® approach to asymmetric gear design Describes asymmetric tooth gear geometry optimization, areas of existence, and parameter selection limits Considers practical aspects of asymmetric gear fabrication and measurement Presents analytical and experimental comparison of asymmetric gears to advanced symmetric gears, showing the advantages of asymmetric designs Provides numerous real-world examples of asymmetric gear application
Download or read book Global Design to Gain a Competitive Edge written by Xiu-Tian Yan and published by Springer Science & Business Media. This book was released on 2008-07-30 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent rapid globalisation of manufacturing industries leads to a drive and thirst for rapid advancements in technological development and expertise in the fields of advanced design and manufacturing, especially at their interfaces. This development results in many economical benefits to and improvement of quality of life for many people all over the world. Technically speaking, this rapid development also create many opportunities and challenges for both industrialists and academics, as the design requirements and constraints have completely changed in this global design and manufacture environment. Consequently the way to design, manufacture and realise products have changed as well. The days of designing for a local market and using local suppliers in manufacturing have gone, if enterprises aim to maintain their competitiveness and global expansion leading to further success. In this global context and scenario, both industry and the academia have an urgent need to equip themselves with the latest knowledge, technology and methods developed for engineering design and manufacture. To address this shift in engineering design and manufacture, supported by the European Commission under the Asia Link Programme with a project title FASTAHEAD (A Framework Approach to Strengthening Asian Higher Education in Advanced Design and Manufacture), three key project partners, namely the University of Strathclyde of the United Kingdom, Northwestern Polytechncial University of China, and the Troyes University of Technology of France organised a third international conference.
Download or read book Advances in Manufacturing written by Adam Hamrol and published by Springer. This book was released on 2017-10-18 with total page 949 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics in material, mechanical, and management engineering, especially in the area of machine design, product assembly, measurement systems, process planning and quality control. It describes cutting-edge methods and applications, together with exemplary case studies. The content is based on papers presented at the 5th International Scientific-Technical Conference (MANUFACTURING 2017) held in Poznan, Poland on 24-26 October 2017. The book brings together engineering and economic topics, is intended as an extensive, timely and practice-oriented reference guide for researchers and practitioners, and is expected to foster better communication and closer cooperation between universities and their business and industry partners.
Download or read book International Gear Conference 2014 26th 28th August 2014 Lyon written by Philippe Velex and published by Chandos Publishing. This book was released on 2014-09-18 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents papers from the International Gear Conference 2014, held in Lyon, 26th-28th August 2014. Mechanical transmission components such as gears, rolling element bearings, CVTs, belts and chains are present in every industrial sector and over recent years, increasing competitive pressure and environmental concerns have provided an impetus for cleaner, more efficient and quieter units. Moreover, the emergence of relatively new applications such as wind turbines, hybrid transmissions and jet engines has led to even more severe constraints. The main objective of this conference is to provide a forum for the most recent advances, addressing the challenges in modern mechanical transmissions. The conference proceedings address all aspects of gear and power transmission technology and range of applications (aerospace, automotive, wind turbine, and others) including topical issues such as power losses and efficiency, gear vibrations and noise, lubrication, contact failures, tribo-dynamics and nano transmissions. - A truly international contribution with more than 120 papers from all over the world - A judicious balance between fundamental research and industrial concerns - Participation of the most respected international experts in the field of gearing - A wide range of applications in terms of size, power, speed, and industrial sector
Download or read book Face gear Drives Design Analysis and Testing for Helicopter Transmission Applications written by and published by . This book was released on 1992 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gear Geometry and Applied Theory written by Faydor L. Litvin and published by Cambridge University Press. This book was released on 2004-09-06 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised, expanded edition covers the theory, design, geometry, and manufacture of all types of gears and gear drives. An invaluable reference for designers, theoreticians, students, and manufacturers, the second edition includes advances in gear theory, gear manufacturing, and computer simulation. Among the new topics are: new geometry for gears and pumps; new design approaches for planetary gear trains and bevel gear drives; an enhanced approach for stress analysis; new methods of grinding and gear shaving; and new theory on the simulation and its application. First Edition published by Pearson Education Hb (1994): 0-132-11095-4
Download or read book Face Gear Drive with Spur Involute Pinion Geometry Generation by a Worm Stress Analysis written by and published by . This book was released on 2002 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: A face gear drive with a spur involute pinion is considered. The generation of the face gear is based on application of a grinding or cutting worm whereas the conventional method of generation is based on application of an involute shaper. An analytical approach for determination of: (1) the worm thread surface, (2) avoidance of singularities of the worm thread surface, (3) dressing of the worm, and (4) determination of stresses of the face-gear drive, is proposed. A computer program for simulation of meshing and contact of the pinion and face-gear has been developed. Correction of machine-tool settings is proposed for reduction of the shift of the bearing contact caused by misalignment. An automatic development of the model of five contacting teeth has been proposed for stress analysis. Numerical examples for illustration of the developed theory are provided.
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 2003 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bevel Gear written by Jan Klingelnberg and published by Springer. This book was released on 2016-03-25 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to offer a complete presentation of bevel gears. An expert team of authors highlights the areas of application for these machine elements and presents the geometrical features of bevel gears as well as the various gear cutting processes based on gear cutting theory. The aspect of three-dimensional gearing is assessed in detail in terms of flank design, load capacity and noise behavior. A representation of production processes with the required technologies provides a knowledge base on which sound decisions can be based. The authors offer a thorough introduction to the complex world of bevel gears and present the rapid advances of these machine elements in a detailed, comprehensible manner. This book addresses design engineers in mechanical engineering and vehicle manufacturing, as well as producers of bevel gears and students in mechanical engineering.
Download or read book Modern Robotics written by Kevin M. Lynch and published by Cambridge University Press. This book was released on 2017-05-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern and unified treatment of the mechanics, planning, and control of robots, suitable for a first course in robotics.
Download or read book Noncircular Gears written by Faydor L. Litvin and published by Cambridge University Press. This book was released on 2014-03-06 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noncircular Gears: Design and Generation represents the extension of the modern theory of gearing applied to the design and manufacture of the main types of noncircular gears: conventional and modified elliptical gears, eccentric gears, oval gears, gears with lobes, and twisted gears. This book is enhanced by updated theoretical description of the methods of generation of noncircular gears by enveloping methods similar to those applied to the generation of circular gears. Noncircular Gears: Design and Generation also offers new developments directed to extend the application of noncircular gears for output speed variation and generation of functions. Numerous numerical examples show the application of the developed theory. This book aims to extend the application of noncircular gear drives in mechanisms and industry.
Download or read book Development of Gear Technology and Theory of Gearing written by Faydor L. Litvin and published by . This book was released on 1997 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent developments in the theory of gearing and the modifications in gear geometry necessary to improve the conditions of meshing. Highlighted are low-noise gear drives that have a stable contact during meshing and a predesigned parabolic transmission error function that can handle misalignment during operation without sacrificing the low-noise aspects of operation. This book also provides a comprehensive history of the develoment of the theory of gearing through biographies of major contributors to this field. The author's unique historical perspective was achieved by assiduous research into the lives of courageous, talented, and creative men who made significant contributions to the field of gearing.
Download or read book The Geometry of Involute Gears written by J.R. Colbourne and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Of all the many types of machine elements which exist today, gears are among the most commonly used. The basic idea of a wheel with teeth is extremely simple, and dates back several thousand years. It is obvious to any observer that one gear drives another by means of the meshing teeth, and to the person who has never studied gears, it might seem that no further explanation is required. It may therefore come as a surprise to discover the large quantity of geometric theory that exists on the subject of gears, and to find that there is probably no branch of mechanical engineering where theory and practice are more closely linked. Enormous improvements have been made in the performance of gears during the last two hundred years or so, and this has been due principally to the careful attention given to the shape of the teeth. The theoretical shape of the tooth profile used in most modern gears is an involute. When precision gears are cut by modern gear-cutting machines, the accuracy with which the actual teeth conform to their theoretical shape is quite remarkable, and far exceeds the accuracy which is attained in the manufacture of most other types of machine elements. The first part of this book deals with spur gears, which are gears with teeth that are parallel to the gear axis. The second part describes helical gears, whose teeth form helices about the gear axis.
Download or read book The Performance Economy written by W. Stahel and published by Springer. This book was released on 2010-02-24 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated and revised edition outlines strategies and models for how to use technology and knowledge to improve performance, create jobs and increase income. It shows what skills will be required to produce, sell and manage performance over time, and how manual jobs can contribute to reduce the consumption of non-renewable resources.
Download or read book The International Space Station written by Robert C. Dempsey and published by Government Printing Office. This book was released on 2017 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Looks at the operations of the International Space Station from the perspective of the Houston flight control team, under the leadership of NASA's flight directors, who authored the book. The book provides insight into the vast amount of time and energy that these teams devote to the development, planning and integration of a mission before it is executed. The passion and attention to detail of the flight control team members, who are always ready to step up when things do not go well, is a hallmark of NASA human spaceflight operations. With tremendous support from the ISS program office and engineering community, the flight control team has made the International Space Station and the programs before it a success.
