Download or read book Design for Manufacturability and Statistical Design written by Michael Orshansky and published by Springer Science & Business Media. This book was released on 2007-10-28 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design for Manufacturability and Statistical Design: A Comprehensive Approach presents a comprehensive overview of methods that need to be mastered in understanding state-of-the-art design for manufacturability and statistical design methodologies. Broadly, design for manufacturability is a set of techniques that attempt to fix the systematic sources of variability, such as those due to photolithography and CMP. Statistical design, on the other hand, deals with the random sources of variability. Both paradigms operate within a common framework, and their joint comprehensive treatment is one of the objectives of this book and an important differentation.

Download or read book Design for Manufacturability and Yield for Nano Scale CMOS written by Charles Chiang and published by Springer Science & Business Media. This book was released on 2007-06-15 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book walks the reader through all the aspects of manufacturability and yield in a nano-CMOS process. It covers all CAD/CAE aspects of a SOC design flow and addresses a new topic (DFM/DFY) critical at 90 nm and beyond. This book is a must read book the serious practicing IC designer and an excellent primer for any graduate student intent on having a career in IC design or in EDA tool development.

Download or read book VLSI Design for Manufacturing Yield Enhancement written by Stephen W. Director and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the keys to success in the IC industry is getting a new product to market in a timely fashion and being able to produce that product with sufficient yield to be profitable. There are two ways to increase yield: by improving the control of the manufacturing process and by designing the process and the circuits in such a way as to minimize the effect of the inherent variations of the process on performance. The latter is typically referred to as "design for manufacture" or "statistical design". As device sizes continue to shrink, the effects of the inherent fluctuations in the IC fabrication process will have an even more obvious effect on circuit performance. And design for manufacture will increase in importance. We have been working in the area of statistically based computer aided design for more than 13 years. During the last decade we have been working with each other, and individually with our students, to develop methods and CAD tools that can be used to improve yield during the design and manufacturing phases of IC realization. This effort has resulted in a large number of publications that have appeared in a variety of journals and conference proceedings. Thus our motivation in writing this book is to put, in one place, a description of our approach to IC yield enhancement. While the work that is contained in this book has appeared in the open literature, we have attempted to use a consistent notation throughout this book.

Download or read book Design for Excellence in Electronics Manufacturing written by Cheryl Tulkoff and published by John Wiley & Sons. This book was released on 2021-03-30 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: DESIGN FOR EXCELLENCE IN ELECTRONICS MANUFACTURING An authoritative guide to optimizing design for manufacturability and reliability from a team of experts Design for Excellence in Electronics Manufacturing is a comprehensive, state-of-the-art book that covers design and reliability of electronics. The authors—noted experts on the topic—explain how using the DfX concepts of design for reliability, design for manufacturability, design for environment, design for testability, and more, reduce research and development costs and decrease time to market and allow companies to confidently issue warranty coverage. By employing the concepts outlined in Design for Excellence in Electronics Manufacturing, engineers and managers can increase customer satisfaction, market share, and long-term profits. In addition, the authors describe the best practices regarding product design and show how the practices can be adapted for different manufacturing processes, suppliers, use environments, and reliability expectations. This important book: Contains a comprehensive review of the design and reliability of electronics Covers a range of topics: establishing a reliability program, design for the use environment, design for manufacturability, and more Includes technical information on electronic packaging, discrete components, and assembly processes Shows how aspects of electronics can fail under different environmental stresses Written for reliability engineers, electronics engineers, design engineers, component engineers, and others, Design for Excellence in Electronics Manufacturing is a comprehensive book that reveals how to get product design right the first time.

Download or read book Design for Manufacturability written by David M. Anderson and published by CRC Press. This book was released on 2020-05-11 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: Achieve any cost goals in half the time and achieve stable production with quality designed in right-the-first-time. Design for Manufacturability: How to Use Concurrent Engineering to Rapidly Develop Low-Cost, High-Quality Products for Lean Production is still the definitive work on DFM. This second edition extends the proven methodology to the most advanced product development process with the addition of the following new, unique, and original topics, which have never been addressed previously. These topics show you how to: Cut cost from 1/2 to 1/10 in 9 categories—with ways to remove that much cost from product charges and pricing Commercialize innovation—starting with Manufacturable Research and learning from the new section on scalability, you will learn how to design products and processing equipment to quickly scale up to any needed demand or desired growth. Design product families that can be built "on-demand" in platform cells that also "mass customize" products to-order Make Lean production easier to implement with much more effective results while making build-to-order practical with spontaneous supply chains and eliminating forecasted inventory by including an updated chapter on "Designing Products for Lean Production" The author’s 30 years of experience teaching companies DFM based on pre-class surveys and plant tours is the foundation of this most advanced design process. It includes incorporating dozens of proven DFM guidelines through up-front concurrent-engineering teamwork that cuts the time to stable production in half and curtails change orders for ramps, rework, redesign, substituting cheaper parts, change orders to fix the changes, unstable design specs, part obsolescence, and late discovery of manufacturability issues at periodic design reviews. This second edition is for the whole product development community, including: Engineers who want to learn the most advanced DFM techniques Managers who want to lead the most advanced product development Project team leaders who want to immediately apply all the principles taught in this book in their own micro-climate Improvement leaders and champions who want to implement the above and ensure that the company can design products and versatile processing equipment for low-volume/high-mix product varieties Designing half to a tenth of cost categories can avoid substituting cheap parts, which degrades quality, and encourages standardization and spontaneous supply chains, which will encourage Lean initiatives. Using cellular manufacturing to shift production between lines for mixed production of platforms and build-to-order to offer the fastest order fulfillment can beat any competitors’ delivery time.

Download or read book Industrial Design of Experiments written by Sammy Shina and published by Springer Nature. This book was released on 2022 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides the tools, techniques, and industry examples needed for the successful implementation of design of experiments (DoE) in engineering and manufacturing applications. It contains a high-level engineering analysis of key issues in the design, development, and successful analysis of industrial DoE, focusing on the design aspect of the experiment and then on interpreting the results. Statistical analysis is shown without formula derivation, and readers are directed as to the meaning of each term in the statistical analysis. Industrial Design of Experiments: A Case Study Approach for Design and Process Optimization is designed for graduate-level DoE, engineering design, and general statistical courses, as well as professional education and certification classes. Practicing engineers and managers working in multidisciplinary product development will find it to be an invaluable reference that provides all the information needed to accomplish a successful DoE. Presents classical versus Taguchi DoE methodologies as well as techniques developed by the author for successful DoE; Offers a step-wise approach to DoE optimization and interpretation of results; Includes industrial case studies, worked examples and detailed solutions to problems.

Download or read book Design of Experiments for Engineers and Scientists written by Jiju Antony and published by Elsevier. This book was released on 2023-06-02 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of Design of Experiments for Engineers and Scientists adds to the tried and trusted tools that were successful in so many engineering organizations with new coverage of design of experiments (DoE) in the service sector. Case studies are updated throughout, and new ones are added on dentistry, higher education, and utilities. Although many books have been written on DoE for statisticians, this book overcomes the challenges a wider audience faces in using statistics by using easy-to-read graphical tools. Readers will find the concepts in this book both familiar and easy to understand, and users will soon be able to apply them in their work or research. This classic book is essential reading for engineers and scientists from all disciplines tackling all kinds of product and process quality problems and will be an ideal resource for students of this topic. Written in nonstatistical language, the book is an essential and accessible text for scientists and engineers who want to learn how to use DoE Explains why teaching DoE techniques in the improvement phase of Six Sigma is an important part of problem-solving methodology New edition includes two new chapters on DoE for services as well as case studies illustrating its wider application in the service industry

Download or read book Nano CMOS Design for Manufacturability written by Ban P. Wong and published by John Wiley & Sons. This book was released on 2008-12-29 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover innovative tools that pave the way from circuit and physical design to fabrication processing Nano-CMOS Design for Manufacturability examines the challenges that design engineers face in the nano-scaled era, such as exacerbated effects and the proven design for manufacturability (DFM) methodology in the midst of increasing variability and design process interactions. In addition to discussing the difficulties brought on by the continued dimensional scaling in conformance with Moore's law, the authors also tackle complex issues in the design process to overcome the difficulties, including the use of a functional first silicon to support a predictable product ramp. Moreover, they introduce several emerging concepts, including stress proximity effects, contour-based extraction, and design process interactions. This book is the sequel to Nano-CMOS Circuit and Physical Design, taking design to technology nodes beyond 65nm geometries. It is divided into three parts: Part One, Newly Exacerbated Effects, introduces the newly exacerbated effects that require designers' attention, beginning with a discussion of the lithography aspects of DFM, followed by the impact of layout on transistor performance Part Two, Design Solutions, examines how to mitigate the impact of process effects, discussing the methodology needed to make sub-wavelength patterning technology work in manufacturing, as well as design solutions to deal with signal, power integrity, WELL, stress proximity effects, and process variability Part Three, The Road to DFM, describes new tools needed to support DFM efforts, including an auto-correction tool capable of fixing the layout of cells with multiple optimization goals, followed by a look ahead into the future of DFM Throughout the book, real-world examples simplify complex concepts, helping readers see how they can successfully handle projects on Nano-CMOS nodes. It provides a bridge that allows engineers to go from physical and circuit design to fabrication processing and, in short, make designs that are not only functional, but that also meet power and performance goals within the design schedule.

Download or read book Product Development written by Anil Mital and published by Elsevier. This book was released on 2014-08-12 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Product development teams are composed of an integrated group of professionals working from the nascent stage of new product planning through design creation and design review and then on to manufacturing planning and cost accounting. An increasingly large number of graduate and professional training programs are aimed at meeting that need by creating a better understanding of how to integrate and accelerate the entire product development process. This book is the perfect accompaniment and a comprehensive guide. The second edition of this instructional reference work presents invaluable insight into the concurrent nature of the multidisciplinary product development process. It can be used in the traditional classroom, in professional continuing education courses or for self-study. This book has a ready audience among graduate students in mechanical and industrial engineering, as well as in many MBA programs focused on manufacturing management. This is a global need that will find a receptive readership in the industrialized world particularly in the rapidly developing industrial economies of South Asia and Southeast Asia. Reviews the precepts of Product design in a step-by-step structured process and focuses on the concurrent nature of product design Helps the reader to understand the connection between initial design and interim and final design, including design review and materials selection Offers insight into roles played by product functionality, ease-of assembly, maintenance and durability, and their interaction with cost estimation and manufacturability through the application of design principles to actual products

Download or read book Design for Manufacturability written by Artur Balasinski and published by Springer Science & Business Media. This book was released on 2013-10-05 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains integrated circuit design for manufacturability (DfM) at the product level (packaging, applications) and applies engineering DfM principles to the latest standards of product development at 22 nm technology nodes. It is a valuable guide for layout designers, packaging engineers and quality engineers, covering DfM development from 1D to 4D, involving IC design flow setup, best practices, links to manufacturing and product definition, for process technologies down to 22 nm node, and product families including memories, logic, system-on-chip and system-in-package.

Download or read book Six Sigma for Electronics Design and Manufacturing written by Sammy G. Shina and published by McGraw Hill Professional. This book was released on 2002-04-22 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Covers the nuts, bolts, and statistics of implementing Six Sigma in electronics manufacturing--includes case studies and detailed calculations

Download or read book Design for Manufacturing written by Corrado Poli and published by Elsevier. This book was released on 2001-11-29 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design for Manufacturing assists anyone not familiar with various manufacturing processes in better visualizing and understanding the relationship between part design and the ease or difficulty of producing the part. Decisions made during the early conceptual stages of design have a great effect on subsequent stages. In fact, quite often more than 70% of the manufacturing cost of a product is determined at this conceptual stage, yet manufacturing is not involved. Through this book, designers will gain insight that will allow them to assess the impact of their proposed design on manufacturing difficulty. The vast majority of components found in commercial batch-manufactured products, such as appliances, computers and office automation equipment are either injection molded, stamped, die cast, or (occasionally) forged. This book emphasizes these particular, most commonly implemented processes. In addition to chapters on these processes, the book touches upon material process selection, general guidelines for determining whether several components should be combined into a single component or not, communications, the physical and mechanical properties of materials, tolerances, and inspection and quality control. In developing the DFM methods presented in this book, he has worked with over 30 firms specializing in injection molding, die-casting, forging and stamping. Implements a philosophy which allows for easier and more economic production of designs Educates designers about manufacturing Emphasizes the four major manufacturing processes

Download or read book Design for Manufacturability written by David M. Anderson (Engineer) and published by . This book was released on 2001 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Statistical Robust Design written by Magnus Arner and published by John Wiley & Sons. This book was released on 2014-02-04 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: A UNIQUELY PRACTICAL APPROACH TO ROBUST DESIGN FROM A STATISTICAL AND ENGINEERING PERSPECTIVE Variation in environment, usage conditions, and the manufacturing process has long presented a challenge in product engineering, and reducing variation is universally recognized as a key to improving reliability and productivity. One key and cost-effective way to achieve this is by robust design – making the product as insensitive as possible to variation. With Design for Six Sigma training programs primarily in mind, the author of this book offers practical examples that will help to guide product engineers through every stage of experimental design: formulating problems, planning experiments, and analysing data. He discusses both physical and virtual techniques, and includes numerous exercises and solutions that make the book an ideal resource for teaching or self-study. • Presents a practical approach to robust design through design of experiments. • Offers a balance between statistical and industrial aspects of robust design. • Includes practical exercises, making the book useful for teaching. • Covers both physical and virtual approaches to robust design. • Supported by an accompanying website (www.wiley/com/go/robust) featuring MATLAB® scripts and solutions to exercises. • Written by an experienced industrial design practitioner. This book’s state of the art perspective will be of benefit to practitioners of robust design in industry, consultants providing training in Design for Six Sigma, and quality engineers. It will also be a valuable resource for specialized university courses in statistics or quality engineering.

Download or read book Manufacturing Process Design and Optimization written by Rhyder and published by CRC Press. This book was released on 1997-04-15 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents the concepts of process design, problem identification, problem-solving and process optimization. It provides the basic tools needed to increase the consistency and profitability of manufacturing options, stressing the paradigms of improvement and emphasizing the hands-on use of tools furnished. The book introduces basic experimental design principles and avoids complicated statistical formulae.

Download or read book Product Design for Manufacture and Assembly Third Edition written by Geoffrey Boothroyd and published by CRC Press. This book was released on 2010-12-08 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hailed as a groundbreaking and important textbook upon its initial publication, the latest iteration of Product Design for Manufacture and Assembly does not rest on those laurels. In addition to the expected updating of data in all chapters, this third edition has been revised to provide a top-notch textbook for university-level courses in product design and manufacturing design. The authors have added a comprehensive set of problems and student assignments to each chapter, making the new edition substantially more useful. See what’s in the Third Edition: Updated case studies on the application of DFMA techniques Extended versions of the classification schemes of the features of products that influence the difficulty of handling and insertion for manual, high-speed automatic, and robot assembly Discussions of changes in the industry such as increased emphasis on the use of surface mount devices New data on basic manufacturing processes Coverage of powder injection molding Recognized as international experts on the re-engineering of electro-mechanical products, the methods and guidelines developed by Boothroyd, Dewhurst, and Knight have been documented to provide significant savings in the product development process. Often attributed with creating a revolution in product design, the authors have been working in product design manufacture and assembly for more than 25 years. Based on theory yet highly practical, their text defines the factors that influence the ease of assembly and manufacture of products for a wide range of the basic processes used in industry. It demonstrates how to develop competitive products that are simpler in configuration and easier to manufacture with reduced overall costs.

Download or read book Design and Analysis of Integrated Manufacturing Systems written by W. Dale Compton and published by National Academies Press. This book was released on 1988-02-01 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Analysis of Integrated Manufacturing Systems is a fresh look at manufacturing from a systems point of view. This collection of papers from a symposium sponsored by the National Academy of Engineering explores the need for new technologies, the more effective use of new tools of analysis, and the improved integration of all elements of manufacturing operations, including machines, information, and humans. It is one of the few volumes to include detailed proposals for research that match the needs of industry.