Download or read book Modeling And Electrothermal Simulation Of Sic Power Devices Using Silvaco Atlas written by Bejoy N Pushpakaran and published by World Scientific. This book was released on 2019-03-22 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of this book is to provide a sound understanding of wide bandgap Silicon Carbide (SiC) power semiconductor device simulation using Silvaco© ATLAS Technology Computer Aided Design (TCAD) software. Physics-based TCAD modeling of SiC power devices can be extremely challenging due to the wide bandgap of the semiconductor material. The material presented in this book aims to shorten the learning curve required to start successful SiC device simulation by providing a detailed explanation of simulation code and the impact of various modeling and simulation parameters on the simulation results. Non-isothermal simulation to predict heat dissipation and lattice temperature rise in a SiC device structure under switching condition has been explained in detail. Key pointers including runtime error messages, code debugging, implications of using certain models and parameter values, and other factors beneficial to device simulation are provided based on the authors' experience while simulating SiC device structures. This book is useful for students, researchers, and semiconductor professionals working in the area of SiC semiconductor technology. Readers will be provided with the source code of several fully functional simulation programs that illustrate the use of Silvaco© ATLAS to simulate SiC power device structure, as well as supplementary material for download.Related Link(s)

Download or read book Characterization of Wide Bandgap Power Semiconductor Devices written by Fei Wang and published by Institution of Engineering and Technology. This book was released on 2018-09-05 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the heart of modern power electronics converters are power semiconductor switching devices. The emergence of wide bandgap (WBG) semiconductor devices, including silicon carbide and gallium nitride, promises power electronics converters with higher efficiency, smaller size, lighter weight, and lower cost than converters using the established silicon-based devices. However, WBG devices pose new challenges for converter design and require more careful characterization, in particular due to their fast switching speed and more stringent need for protection.

Download or read book Advanced Silicon Carbide Devices and Processing written by Stephen Saddow and published by BoD – Books on Demand. This book was released on 2015-09-17 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the production of the first commercially available blue LED in the late 1980s, silicon carbide technology has grown into a billion-dollar industry world-wide in the area of solid-state lighting and power electronics. With this in mind we organized this book to bring to the attention of those well versed in SiC technology some new developments in the field with a particular emphasis on particularly promising technologies such as SiC-based solar cells and optoelectronics. We have balanced this with the more traditional subjects such as power electronics and some new developments in the improvement of the MOS system for SiC MOSFETS. Given the importance of advanced microsystems and sensors based on SiC, we also included a review on 3C-SiC for both microsystem and electronic applications.

Download or read book Silicon Carbide Power Devices written by B. Jayant Baliga and published by World Scientific. This book was released on 2006-01-05 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power semiconductor devices are widely used for the control and management of electrical energy. The improving performance of power devices has enabled cost reductions and efficiency increases resulting in lower fossil fuel usage and less environmental pollution. This book provides the first cohesive treatment of the physics and design of silicon carbide power devices with an emphasis on unipolar structures. It uses the results of extensive numerical simulations to elucidate the operating principles of these important devices. Sample Chapter(s). Chapter 1: Introduction (72 KB). Contents: Material Properties and Technology; Breakdown Voltage; PiN Rectifiers; Schottky Rectifiers; Shielded Schottky Rectifiers; Metal-Semiconductor Field Effect Transistors; The Baliga-Pair Configuration; Planar Power MOSFETs; Shielded Planar MOSFETs; Trench-Gate Power MOSFETs; Shielded Trendch-Gate MOSFETs; Charge Coupled Structures; Integral Diodes; Lateral High Voltage FETs; Synopsis. Readership: For practising engineers working on power devices, and as a supplementary textbook for a graduate level course on power devices.

Download or read book Fundamentals of Silicon Carbide Technology written by Tsunenobu Kimoto and published by John Wiley & Sons. This book was released on 2014-11-24 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction and up-to-date reference to SiC power semiconductor devices covering topics from material properties to applications Based on a number of breakthroughs in SiC material science and fabrication technology in the 1980s and 1990s, the first SiC Schottky barrier diodes (SBDs) were released as commercial products in 2001. The SiC SBD market has grown significantly since that time, and SBDs are now used in a variety of power systems, particularly switch-mode power supplies and motor controls. SiC power MOSFETs entered commercial production in 2011, providing rugged, high-efficiency switches for high-frequency power systems. In this wide-ranging book, the authors draw on their considerable experience to present both an introduction to SiC materials, devices, and applications and an in-depth reference for scientists and engineers working in this fast-moving field. Fundamentals of Silicon Carbide Technology covers basic properties of SiC materials, processing technology, theory and analysis of practical devices, and an overview of the most important systems applications. Specifically included are: A complete discussion of SiC material properties, bulk crystal growth, epitaxial growth, device fabrication technology, and characterization techniques. Device physics and operating equations for Schottky diodes, pin diodes, JBS/MPS diodes, JFETs, MOSFETs, BJTs, IGBTs, and thyristors. A survey of power electronics applications, including switch-mode power supplies, motor drives, power converters for electric vehicles, and converters for renewable energy sources. Coverage of special applications, including microwave devices, high-temperature electronics, and rugged sensors. Fully illustrated throughout, the text is written by recognized experts with over 45 years of combined experience in SiC research and development. This book is intended for graduate students and researchers in crystal growth, material science, and semiconductor device technology. The book is also useful for design engineers, application engineers, and product managers in areas such as power supplies, converter and inverter design, electric vehicle technology, high-temperature electronics, sensors, and smart grid technology.

Download or read book Conference Proceedings of 2021 International Joint Conference on Energy Electrical and Power Engineering written by Cungang Hu and published by Springer Nature. This book was released on 2022-09-02 with total page 733 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will be a collection of the papers presented in the 2021 International Joint Conference on Energy, Electrical and Power Engineering (CoEEPE’21), covering new and renewable energy, electrical and power engineering. It is expected to report the latest technological developments in the fields developed by academic researchers and industrial practitioners, with a focus on power electronics, energy storage and system control in energy and electrical power systems. The applications and dissemination of these technologies will benefit research society as new research directions are getting more and more inter-disciplinary which require researchers from different research areas to come together and form ideas jointly. It will also benefit the electrical engineering and power industry as we are now experiencing a new wave of industrial revelation, that is, electrification, intelligentization and digitalization of our transport, manufacturing process and way of thinking.

Download or read book Wide Bandgap Semiconductor Power Devices written by B. Jayant Baliga and published by Woodhead Publishing. This book was released on 2018-10-17 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wide Bandgap Semiconductor Power Devices: Materials, Physics, Design and Applications provides readers with a single resource on why these devices are superior to existing silicon devices. The book lays the groundwork for an understanding of an array of applications and anticipated benefits in energy savings. Authored by the Founder of the Power Semiconductor Research Center at North Carolina State University (and creator of the IGBT device), Dr. B. Jayant Baliga is one of the highest regarded experts in the field. He thus leads this team who comprehensively review the materials, device physics, design considerations and relevant applications discussed. - Comprehensively covers power electronic devices, including materials (both gallium nitride and silicon carbide), physics, design considerations, and the most promising applications - Addresses the key challenges towards the realization of wide bandgap power electronic devices, including materials defects, performance and reliability - Provides the benefits of wide bandgap semiconductors, including opportunities for cost reduction and social impact

Download or read book High Temperature Electronics written by F. Patrick McCluskey and published by CRC Press. This book was released on 1996-12-13 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of electronics that can operate at high temperatures has been identified as a critical technology for the next century. Increasingly, engineers will be called upon to design avionics, automotive, and geophysical electronic systems requiring components and packaging reliable to 200 °C and beyond. Until now, however, they have had no single resource on high temperature electronics to assist them. Such a resource is critically needed, since the design and manufacture of electronic components have now made it possible to design electronic systems that will operate reliably above the traditional temperature limit of 125 °C. However, successful system development efforts hinge on a firm understanding of the fundamentals of semiconductor physics and device processing, materials selection, package design, and thermal management, together with a knowledge of the intended application environments. High Temperature Electronics brings together this essential information and presents it for the first time in a unified way. Packaging and device engineers and technologists will find this book required reading for its coverage of the techniques and tradeoffs involved in materials selection, design, and thermal management and for its presentation of best design practices using actual fielded systems as examples. In addition, professors and students will find this book suitable for graduate-level courses because of its detailed level of explanation and its coverage of fundamental scientific concepts. Experts from the field of high temperature electronics have contributed to nine chapters covering topics ranging from semiconductor device selection to testing and final assembly.

Download or read book Silicon Carbide written by Wolfgang J. Choyke and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1997 publication of "Silicon Carbide - A Review of Fundamental Questions and Applications to Current Device Technology" edited by Choyke, et al., there has been impressive progress in both the fundamental and developmental aspects of the SiC field. So there is a growing need to update the scientific community on the important events in research and development since then. The editors have again gathered an outstanding team of the world's leading SiC researchers and design engineers to write on the most recent developments in SiC.

Download or read book On the perspectives of SiC MOSFETs in high frequency and high power isolated DC DC converters written by Eial Awwad, Abdullah and published by Universitätsverlag der TU Berlin. This book was released on 2020-08-11 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing demand for efficiency and power density pushes Si-based devices to some of their inherent material limits, including those related to temperature operation, switching frequency, and blocking voltage. Recently, SiC-based power devices are promising candidates for high-power and high-frequency switching applications. Today, SiC MOSFETs are commercially available from several manufacturers. Although technology affiliated with SiC MOSFETs is improving rapidly, many challenges remain, and some of them are investigated in this work. The research work in this dissertation is divided into the three following parts. Firstly, the static and switching characteristics of the state-of-the-art 1.2 kV planar and double-trench SiC MOSFETs from two different manufacturers are evaluated. The effects of different biasing voltages, DC link voltages, and temperatures are analysed. The characterisation results show that the devices exhibit superior switching performances under different operating conditions. Moreover, several aspects of using the SiC MOSFET’s body diode in a DC/DC converter are investigated, comparing the body-diodes of planar and double-trench devices. Reverse recovery is evaluated in switching tests considering the case temperature, switching rate, forward current, and applied voltage. Based on the measurement results, the junction temperature is estimated to guarantee safe operation. A simple electro-thermal model is proposed in order to estimate the maximum allowed switching frequency based on the thermal design of the SiC devices. Using these results, hard- and soft-switching converters are designed, and devices are characterised as being in continuous operation at a very high switching frequency of 1 MHz. Thereafter, the SiC MOSFETs are operated in a continuous mode in a 10 kW / 100-250 kHz buck converter, comparing synchronous rectification, the use of the body diode, and the use of an external Schottky diode. Further, the parallel operation of the planar devices is considered. Thus, the paralleling of SiC MOSFETs is investigated before comparing the devices in continuous converter operation. In this regard, the impact of the most common mismatch parameters on the static and dynamic current sharing of the transistors is evaluated, showing that paralleling of SiC MOSFETs is feasible. Subsequently, an analytical model of SiC MOSFETs for switching loss optimisation is proposed. The analytical model exhibits relatively close agreement with measurement results under different test conditions. The proposed model tracks the oscillation effectively during both turn-on and –off transitions. This has been achieved by considering the influence of the most crucial parasitic elements in both power and gate loops. In the second part, a comprehensive short-circuit ruggedness evaluation focusing on different failure modes of the planar and double-trench SiC devices is presented. The effects of different biasing voltages, DC link voltages, and gate resistances are evaluated. Additionally, the temperature-dependence of the short-circuit capability is evaluated, and the associated failure modes are analysed. Subsequently, the design and test of two different methods for overcurrent protection are proposed. The desaturation technique is applied to the SiC MOSFETs and compared to a second method that depends on the stray inductance of the devices. Finally, the benefits of using SiC devices in continuous high-frequency, high-power DC/DC converters is experimentally evaluated. In this regard, a design optimisation of a high-frequency transformer is introduced, and the impact of different core materials, conductor designs, and winding arrangements are evaluated. A ZVZCS Phase-Shift Full-Bridge unidirectional DC/DC converter is proposed, using only the parasitic leakage inductance of the transformer. Experimental results for a 10 kW, (100-250) kHz prototype indicate an efficiency of up to 98.1% for the whole converter. Furthermore, an optimized control method is proposed to minimise the circulation current in the isolated bidirectional dual active bridge DC/DC converter, based on a modified dual-phase-shift control method. This control method is also experimentally compared with traditional single-phase shift control, yielding a significant improvement in efficiency. The experimental results confirm the theoretical analysis and show that the proposed control can enhance the overall converter efficiency and expand the ZVZCS range. Die steigende Nachfrage nach Effizienz und Leistungsdichte bringt Si-basierte eistungsbauteile an einige inhärente Materialgrenzen, die unter anderem mit der Temperaturbelastung, der Schaltfrequenz und der Blockierspannung in Zusammenhang stehen. In jüngster Zeit sind SiC-basierte Leistungsbauelemente vielversprechende Kandidaten für Hochleistungs- und Hochfrequenzanwendungen. Aktuell sind SiC-MOSFETs von mehreren Herstellern im Handel erhältlich. Obwohl sich die Technologie der SiC-MOSFETs rasch verbessert, werden viele Herausforderungen bestehen bleiben. Einige dieser Herausforderungen werden in dieser Arbeit untersucht. Die Untersuchungen in dieser Dissertation gliedern sich in die drei folgenden Teile: Im ersten Teil erfolgt, die statische und die transiente Charakterisierung der aktuellen 1,2 kV Planarund Doubletrench SiC-MOSFETs verschiedener Hersteller. Die Auswirkungen unterschiedlicher Gatespannungen, Zwischenkreisspannungen und Temperaturen werden analysiert. Die Ergebnisse der Charakterisierung zeigen, dass die Bauteile überlegene Schaltleistungen unter verschiedenen Betriebsbedingungen aufweisen. Darüber hinaus wird der Einsatz der internen SiC-Bodydioden in einem DC/DC-Wandler untersucht, wobei die Unterschiede zwischen Planar- und Doppeltrench-Bauteilen aufgezeigt werden. Das Reverse-Recovery-Verhalten wird unter Berücksichtigung der Gehäusetemperatur, der Schaltgeschwindigkeit, des Durchlassstroms und der angelegten Spannung bewertet. Anhand der Messergebnisse wird die Sperrschichttemperatur geschätzt, damit ein sicherer Betrieb gewährleistet ist. Ein einfaches elektrothermisches Modell wird vorgestellt, um die maximal zulässige Schaltfrequenz auf der Grundlage des thermischen Designs der SiC-Bauteile abzuschätzen. Anhand dieser Ergebnisse werden hart- und weichschaltende Umrichter konzipiert und die Bauteile werden im Dauerbetrieb mit einer sehr hohen Schaltfrequenz von 1 MHz untersucht. Danach werden die SiC-MOSFETs im Dauerbetrieb in einem 10 kW / 100-250 kHz-Tiefsetzsteller betrieben. Dabei wird die Synchrongleichrichtung, die Verwendung der internen Diode und die Verwendung einer externen Schottky-Diode verglichen. Außerdem wird die Parallelisierung von SiC-MOSFETs untersucht, bevor die Parallelschaltung der verschiedenen Bauelemente ebenso im kontinuierlichen Konverterbetrieb verglichen wird. Es wird der Einfluss der häufigsten Parametervariationen auf die statische und dynamische Stromaufteilung der Transistoren analysiert, was zeigt, dass eine Parallelisierung von SiC-MOSFETs möglich ist. Anschließend wird ein analytisches Modell der SiC-MOSFETs zur Schaltverlustoptimierung vorgeschlagen. Das analytische Modell zeigt eine relativ enge Übereinstimmung mit den Messergebnissen unter verschiedenen Testbedingungen. Das vorgeschlagene Modell bildet die Schwingungen sowohl beim Ein- als auch beim Ausschalten effektiv nach. Dies wurde durch die Berücksichtigung der wichtigsten parasitären Elemente in Strom- und Gatekreisen erreicht. Im zweiten Teil wird eine umfassende Bewertung der Kurzschlussfestigkeit mit Fokus auf verschiedene Ausfallmodi der planaren und double-trench SiC-Bauelemente vorgestellt. Die Auswirkungen unterschiedlicher Gatespannungen, Zwischenkreisspannungen und Gate-Widerstände werden ausgewertet. Zusätzlich wird die temperaturabhängige Kurzschlussfähigkeit ausgewertet und die zugehörigen Fehlerfälle werden analysiert. Anschließend wird die Auslegung und Prüfung von zwei verschiedenen Verfahren zum Überstromschutz evaluiert. Die „Desaturation“-Technik wird auf SiC-MOSFETs angewendet und mit einer zweiten Methode verglichen, welche die parasitäre Induktivität der Bauelemente nutzt. Schließlich wird der Nutzen des Einsatzes von SiC-Bauteilen in kontinuierlichen Hochfrequenz-Hochleistungs-DC/DC-Wandlern experimentell untersucht. In diesem Zusammenhang wird eine Designoptimierung eines Hochfrequenztransformators vorgestellt und der Einfluss verschiedener Kernmaterialien, Leiterausführungen und Wicklungsanordnungen wird bewertet. Es wird ein unidirektionaler ZVZCS Vollbrücken-DC/DC-Wandler vorgestellt, der nur die parasitäre Streuinduktivität des Transformators verwendet. Experimentelle Ergebnisse für einen 10 kW, (100-250) kHz Prototyp zeigen einenWirkungsgrad von bis zu 98,1% für den gesamten Umrichter. Abschließend wird ein optimiertes Regelverfahren verwendet, welches auf einem modifizierten Dual-Phase-Shift-Regelverfahren basiert, um den Kreisstrom im isolierten bidirektionalen Dual-Aktiv-Brücken-DC/DC-Wandler zu minimieren. Diese Regelmethode wird experimentell mit der herkömmlichen Single-Phase-Shift-Regelung verglichen. Hierbei zeigt sich eine deutliche Effizienzsteigerung durch die neue Regelmethode. Die experimentellen Ergebnisse bestätigen die theoretische Analyse und zeigen, dass die vorgeschlagene Regelung den Gesamtwirkungsgrad des Umrichters erhöhen und den ZVZCS-Bereich erweitern kann.

Download or read book Wide Energy Bandgap Electronic Devices written by Fan Ren and published by World Scientific. This book was released on 2003 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents state-of-the-art GaN and SiC electronic devices, as well as detailed applications of these devices to power conditioning, r. f. base station infrastructure and high temperature electronics.

Download or read book Power Electronics Semiconductor Devices written by Robert Perret and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book relates the recent developments in several key electrical engineering R&D labs, concentrating on power electronics switches and their use. The first sections deal with key power electronics technologies, MOSFETs and IGBTs, including series and parallel associations. The next section examines silicon carbide and its potentiality for power electronics applications and its present limitations. Then, a dedicated section presents the capacitors, key passive components in power electronics, followed by a modeling method allowing the stray inductances computation, necessary for the precise simulation of switching waveforms. Thermal behavior associated with power switches follows, and the last part proposes some interesting prospectives associated to Power Electronics integration.

Download or read book Emerging Electronic Devices Circuits and Systems written by Chandan Giri and published by Springer Nature. This book was released on 2023-06-01 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book constitutes peer-reviewed proceedings of a workshop on Emerging Electronics Devices, Circuits, and Systems (EEDCS) held in conjunction with International Symposium on Devices, Circuits, and Systems (ISDCS 2022). The book focuses on the recent development in devices, circuits, and systems. It also discusses innovations, trends, practical challenges, and solutions adopted in device design, modeling, fabrication, characterization, and their circuit implementation with pertinent system applications. It will be useful for researchers, developers, engineers, academicians, and students.

Download or read book Proceedings of the 1st International Conference on Electronic Engineering and Renewable Energy written by Bekkay Hajji and published by Springer. This book was released on 2018-08-01 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings present a selection of refereed papers presented at the 1st International Conference on Electronic Engineering and Renewable Energy (ICEERE 2018) held during 15-17 April 2018, Saidi, Morocco. The contributions from electrical engineers and experts highlight key issues and developments essential to the multifaceted field of electrical engineering systems and seek to address multidisciplinary challenges in Information and Communication Technologies. The book has a special focus on energy challenges for developing the Euro-Mediterranean regions through new renewable energy technologies in the agricultural and rural areas. The book is intended for academia, including graduate students, experienced researchers and industrial practitioners working in the fields of Electronic Engineering and Renewable Energy.

Download or read book Solid State Power Devices Circuitry and Characterizations written by Michele Riccio and published by Trans Tech Publications Ltd. This book was released on 2024-08-23 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer-reviewed papers only

Download or read book Frontiers In Electronics With Cd rom Proceedings Of The Wofe 04 written by Michael S Shur and published by World Scientific. This book was released on 2006-08-10 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frontiers in Electronics reports on the most recent developments and future trends in the electronics and photonics industry. The issues address CMOS, SOI and wide band gap semiconductor technology, terahertz technology, and bioelectronics, providing a unique interdisciplinary overview of the key emerging issues.This volume accurately reflects the recent research and development trends: from pure research to research and development; and its contributors are leading experts in microelectronics, nanoelectronics, and nanophotonics from academia, industry, and government agencies.

Download or read book Power Electronics Device Applications of Diamond Semiconductors written by Satoshi Koizumi and published by Woodhead Publishing. This book was released on 2018-06-29 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Device Applications of Diamond Semiconductors presents state-of-the-art research on diamond growth, doping, device processing, theoretical modeling and device performance. The book begins with a comprehensive and close examination of diamond crystal growth from the vapor phase for epitaxial diamond and wafer preparation. It looks at single crystal vapor deposition (CVD) growth sectors and defect control, ultra high purity SC-CVD, SC diamond wafer CVD, heteroepitaxy on Ir/MqO and needle-induced large area growth, also discussing the latest doping and semiconductor characterization methods, fundamental material properties and device physics. The book concludes with a discussion of circuits and applications, featuring the switching behavior of diamond devices and applications, high frequency and high temperature operation, and potential applications of diamond semiconductors for high voltage devices. - Includes contributions from today's most respected researchers who present the latest results for diamond growth, doping, device fabrication, theoretical modeling and device performance - Examines why diamond semiconductors could lead to superior power electronics - Discusses the main challenges to device realization and the best opportunities for the next generation of power electronics