Download or read book Design and Implementation of Personal Computer Based Data Acquisition and Analysis in Electrochemical and Solid State Areas written by B. D. J. R. Fennema and published by . This book was released on 1993 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Design and Implementation of a Data Acquisition Engine Using the Windows NT Operating System written by David M. Kline and published by . This book was released on 1997 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Fermilab's fixed-target experimental physics program employs the beamline Data Acquisition Engine (DAE) to service requests for controlling and reading devices that bend and focus a proton beam towards a particle detector. The DAE is comprised of both hardware and software components which schedule and process Data Acquisition (DAQ) requests from VMS and UNIX-based clients. These components were either purchased commercially or developed in-house. Integrating them together required various protocols and took a considerable amount of effort to implement. The components have proven to be cumbersome to maintain. Because the DAE's components are now obsolete, expensive to replace and maintain, and in many cases have been discontinued, the purpose of this project is to develop a replacement DAE using an Intel based Personal Computer (PC)/Workstation running Windows NT to minimize the amount of in-house developed hardware and software. This project employs the client/server architecture. Users residing on the Internet can acquire readings of a Multiplexed Analog to Digital Converter (MADC) connected to the DAE. In addition, an informal Object Oriented analysis and design approach was employed and design patterns were applied to develop the DAE" --Abstract.
Download or read book Data Acquisition Techniques Using PC written by Howard Austerlitz and published by Academic Press. This book was released on 2014-06-28 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data Acquisition Techniques Using Personal Computers contains all the information required by a technical professional (engineer, scientist, technician) to implement a PC-based acquisition system. Including both basic tutorial information as well as some advanced topics, this work is suitable as a reference book for engineers or as a supplemental text for engineering students. It gives the reader enough understanding of the topics to implement a data acquisition system based on commercial products. A reader can alternatively learn how to custom build hardware or write his or her own software. Featuring diverse information, this book will be useful to both the technical professional and the hobbyist. - Contains tables of reference information on PC/XT/AT computers that are usually not found in a single source - Includes hardware information, such as I/O addresses, memory maps, and hardware interrupts - Discusses software reference material including BIOS and DOS interrupt calls - Presents valuable hardware interface information including timing diagrams, design examples, and descriptions of standard interfaces, such as the RS-232 serial interface
Download or read book Data Acquisition Techniques Using PCs written by Howard Austerlitz and published by Academic Press. This book was released on 2002-12-04 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this highly successful text focuses on the major changes that have taken place in this field in recent times. Data Acquisition Techniques Using PCs, Second Edition, recognises that data acquisition is the core of most engineering and many life science systems in measurement and instrumentation. It will prove invaluable to scientists, engineers, students and technicians wishing to keep up with the latest technological developments. - Teaches the reader how to set up a PC-based system that measures, analyzes, and controls experiments and processes through detailed design examples - Geared for beginning and advanced users, with many tutorials for less experienced readers, and detailed standards references for more experienced readers - Fully revised new edition discusses latest programming languages and includes a list of over 80 product manufacurers to save valuable time
Download or read book Computer based Data Acquisition Systems written by James L. Taylor and published by . This book was released on 1986 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Based Data Acquisition Systems written by James L. Taylor and published by . This book was released on with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Design and Implementation of an On line Data Acquisition and Analysis System written by William Stephen Woodward and published by . This book was released on 1970 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Data Acquisition and Intelligent Data Processing written by Vladimir Haasz and published by CRC Press. This book was released on 2022-09-01 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: DAQ and data processing is a basic part of all automated production systems, diagnostic systems, watching over quality of production, energy distribution, transport control or in various other areas. Demands on the speed, accuracy and reliability increase in general. It is possible to achieve not only using superior (but also more expensive) hardware, but also applying advanced data acquisition and intelligent data processing. It deals e.g. optimal data fusion of a number of sensors, new stochastic methods for accuracy increasing, new algorithms for acceleration of data processing, etc. These are the grounds for publishing this book. Advanced Data Acquisition and Intelligent Data Processing offers 10 up-to-date examples of different applications of advanced data acquisition and intelligent data processing used in monitoring, measuring and diagnostics systems. The book arose based on the most interesting papers from this area published at IDAACS?2013 conference. However, the indivudual chapters include not only designed solution in wider context but also relevant theoretical parts, achieved results and possible future ways.Technical topics discussed in this book include: • advanced methods of data acquisition in application that are not routine;• measured data fusion using up-to-date advanced data processing;• nonlinear dynamical systems identification;• multidimensional image processing.Advanced Data Acquisition and Intelligent Data Processing is ideal for personnel of firms deals with advanced instrumentation, energy consumption monitoring, environment monitoring, non-descructive diagnostics robotics, etc., as well as academic staff and postgraduate students in electrical, control and computer engineering.Content: 1. Introduction; 2. Waveform acquisition with resolutions exceeding those of the ADC employed; 3. Different Disaggregation Algorithms in Non-Intrusive Home Energy Monitoring Systems; 4. Design and testing of an electronic nose system sensitive to the aroma of truffles; 5. DAQ System for Ultrasonic Transducer Evaluation under Spread Spectrum Excitation; 6. Optimal Data Fusion in Decentralized Stochastic Unknown Input Observers; 7. Odor Classification by Neural Networks; 8. ANFIS Based Approach for Improved Multisensors Signal Processing; 9. Neuro-Fuzzy Sensor's Linearization Based FPGA; 10. Interpolation Method of Nonlinear Dynamical Systems Identification Based on Volterra Model in Frequency Domain ; 11. Training Cellular Automata for Hyperspectral Image Segmentation
Download or read book The Design and Implementation of a Portable Data Acquisition System written by Thomas Deng and published by . This book was released on 1995 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computerized Data Acquisition and Analysis for the Life Sciences written by Simon S. Young and published by Cambridge University Press. This book was released on 2001-01-29 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computerized data acquisition systems are often the principal method of recording experimental results. This book takes the reader step-by-step through the process of data acquisition and analysis, explaining how to set up the systems and obtain useful information from the data recorded. In an easy-to-read style, the author guides researchers through the basics of data acquisition systems, explaining the important underlying concepts, and giving numerous examples of how to analyze the recorded information. While aimed at researchers in the life sciences, the topics covered are general and will be valuable to anyone interested in learning to use data acquisition systems. The principles can be applied to the collection of data from respiratory apparatus to behavioral science experiments, and a host of other situations. Many illustrations and worked examples accompany the text, and the mathematics are kept simple. This book is an invaluable tool for the nonengineer who is collecting and analyzing experimental data using data acquisition systems. Researchers, graduate students, and technicians will find it an up-to-date and indispensable guide for setting up equipment and getting the most out of their data.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Design of a Data Acquisition System for Cornell s Time Frequency Analysis Research written by David Darian Muresan and published by . This book was released on 1997 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Implementation of Data Acquisition System written by Sarwat Sheikh and published by . This book was released on 1999 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Petroleum Abstracts Literature and Patents written by and published by . This book was released on 1989 with total page 1528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Design and Implementation of a 6502 Based Data Acquisition System written by Alan S. Galbraith and published by . This book was released on 1982 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PC based data acquisition using PCL 208 written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: DAQ (Data Acquisition) can be defined as the process of bringing a real-world signal, such as a temperature, pressure, voltage etc into the computer, for processing, analysis, storage or other data handling . A Physical occurrence represents the real-world signal you are trying to measure. In order to optimize the distinctiveness of a system in the terms of performance, handling capacity and cost, the relevant subsystem can be combined together. Analog data is usually acquired and renewed into the digital form for the principle of processing, transmission and display. Rapid advances in Personal Computer (PC) hardware and software technologies have made it easy and efficient adoption of PCs in various accurate measurement and in various complex control applications. A PC based measurement or control application requires conversion of real the world analog signal into digital form and transfer of this digitized data into the PC. A data acquisition system that performs conversion of analog signal to digital data and the digital data to analog signal is interfaced to a pc to put into practice the functions of a measurement and control instrumentation applications. In this project we have used the electromagnetic sensor to acquire the data of a magnetic disk angular velocity, which we have got in mili volts range. This has been further converted approximately into the range of 5 volt by using an operational amplifier of suitable gain (~30)and then rectified .We then converted the analog voltage into digital by using ADC 0804 and the processing part is done by using ATMEL89c51. In the second phase we have used the data acquisition card PCL-208 and 207 to interface the amplified output to PC by the help TURBO C (C compiler).
