Download or read book Design and Implementation of Anti collision Algorithms for Dense RFID Systems written by Hazem Elsaid Ibrahim and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Anti Collision in RFID Systems written by Xiaolei Yu and published by Springer Nature. This book was released on 2021-04-15 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the innovative applications of electromagnetics, optics, thermodynamics theories in creating methods for physical-layer collision prevention- "physical anti-collision" in radio frequency identification (RFID) systems. Using engineering mathematical methods as the core of detection and control algorithm design, it proposes semi-physical verification and detection techniques to the dynamic performance testing in RFID systems. The book also introduces the methods to build semi-physical hardware platforms using photoelectric sensing technology. The book provides valuable ideas to the applications of Internet of Things (IOT) systems in smart logistics, car networking, food traceability, anti-counterfeiting and other livelihood fields. It is worth reading for all researchers in IOT and optoelectronic engineering related industries.
Download or read book Reader Anti Collision in Dense RFID Network written by Omed Hassan Ahmed and published by Independently Published. This book was released on 2022-01-30 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, RFID networks are being used extensively in many fields such as automation, tracking, and the Internet of Things (IoT). The reason is related to the significant advantages that lie in making use of these systems. In the many different services of RFID networks, many mobile and fixed readers or RFID reader enhanced devices are used alongside each other. In these situations, there may be many readers and tags in the interference range of one reader, leading to reader collision in RFID systems. If RFID readers are densely used, they cannot read all the tags efficiently. Thus, reader collisions in dense reader environments will undoubtedly cause several difficulties in RFID system operations. Because of the readers' simultaneous activities in the same frequencies, these environments are challenging. The need for RFID applications with several readers will make the research in anti-collision algorithms more critical and essential. In this book, solutions for avoiding and reducing reader collisions are reviewed and compared based on their efficiency to help proceed in studies related to anti-collision solutions. The combination of access schemes, matching the proposed methods with regulations and standards of RFID systems, and correct resource management should all be considered in presenting a good strategy for improving the efficiency of RFID systems. This book will be a helpful review and survey for researchers and graduate students in information technology and computer science and an excellent guide for researchers and developers in the IoT and automation industry. Authors' Affiliations: Mehdi Golsorkhtabaramiri Department of Computer Engineering, Babol Branch, Islamic Azad University, Babol, Iran Omed Hassan Ahmed Department of Information Technology, University of Human Development, Sulaymaniyah, Iraq Sepideh khodkavandi Department of Computer Engineering, Babol Branch, Islamic Azad University, Babol, Iran Hadiseh Rezaie Department of Computer Engineering, Babol Branch, Islamic Azad University, Babol, Iran Neda IssazadehKojidi Department of Computer Engineering, Babol Branch, Islamic Azad University, Babol, Iran Mehdi Hosseinzadeh Mental Health Research Center, Psychosocial Health Research Institute, Iran University of Medical Sciences, Tehran, Iran
Download or read book New Anti collision Solution for Dense RFID Environments written by Christine Krikor Meguerditchian and published by . This book was released on 2011 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio Frequency Identification (RFID) is a method for object identification using radio frequency transmission between readers and tags. It was invented to replace the traditional use of bar codes. It allows a real-time information flow for automated decision making, where serialized data can be read simultaneously increasing the rate of successful interrogations while decreasing delays. In dense RFID environments, such as data collection in large factories or inventory management systems, several readers are placed in close proximity to scan a large number of tags covering a wide distance range. This placement of the RFID elements may result in several types of collisions. In this thesis, we propose a new distributed multi-channel anti-collision algorithm for dense RFID environments that aims at minimizing the identification delay, collision probability, and network overhead. We have evaluated the performance of the proposed approach and compared it to several reader collision solutions found in the literature such as NFRA, Dica and McMac. The results show that the proposed approach reduces reader collisions while minimizing the total interrogation time and the network overheads.
Download or read book Simulation of an Anti collision Algorithm for RFID Systems Using a Code Division Multiple Access with Adaptive Interference Cancellation CDMA AIC Approach with Dynamic Processing Gain Gp written by Natalia Margarita Benitez Gutierrez and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio Frequency Identification (RFID) Systems are modern wireless communication systems that transmit information from a transponder (tag) to a reader. RFID systems are well known because of their contactless feature. However, tag performance is limited by collision problems when multiple tags transmit simultaneously. Due to the collision problem, much research has been developed using anti-collision algorithms to enhance the systems' efficiency, save energy, and ensure the correct transmission of information. Most research has used a Time Division Multiple Access (TDMA) approach with anti-collision ALOHA-type algorithms. The time slots and frames of the tags are manipulated to deal with the collision problem. They work with different ALOHA protocol variants that are always trying to reduce the number of collisions compared to the previous techniques. The most promising of the ALOHA protocol variants is Dynamic Frame Slotted ALOHA (DFSA). In addition, research has been conducted with a Code Division Multiple Access (CDMA) approach, called CDMA with Adaptive Interference Cancellation (CDMA/AIC). The time slots are not used for this anti-collision algorithm; instead, Spread Spectrum (SS) technology and Processing Gain (Gp) were employed. In previous work, the Gp was a fixed value equal to sixty-four (64). In contrast, this research involved a CDMA/AIC approach with a dynamic Gp reached by generating different chip rates. This technique depended on the number of collisions from the previous run to resize the Gp for a subsequent run. CDMA gave the flexibility to use Spread Spectrum. The modulated signal was spread across the channel using orthogonal pseudorandom (PN) codes (generated for each tag) and was demodulated at the reader using the same PN code. The more spread the signal was in the channel, the greater the Gp. The research proved an enhancement in the system's performance compared to the previous work. The system's efficiency enhancement and the anti-collision algorithm were proven using MatLab as the simulation software. No hardware implementation was developed in this research. Both the CDMA and the modified DFSA code were exposed to the same conditions of noise (12, 9, 6 dB SNR), number of tags (20, 60, 80, 100, 150, and 200), number of simulations (1000), and Gp/slots (32, 64, 128, and 256). After the data was collected and processed, the performance of CDMA in noisy scenarios and with a large number of tags was faster and more efficient than DFSA. CDMA presented stability and fast information processing due to its error correction and code spreading features.
Download or read book A Study of Anti collision Multi tag Identification Algorithms for Passive RFID Systems written by Neelima Kamineni and published by . This book was released on 2010 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ICICA 2022 written by Johan Debayle and published by European Alliance for Innovation. This book was released on 2023-03-27 with total page 1295 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2022 2nd International Conference on Information, Control and Automation (ICICA 2022) was held on December 2nd-4th, 2022 in Chongqing, China (virtual event). Invited and contributed papers present the state-of-the-art research in information, control and automation. This workshop always welcomes a fruitful mix of experienced researchers and students, to allow a better understanding of related fields. The 2022 session of the information, control and automation was doubtlessly a great success. The program covered a wide variety of topics, namely Numerical Analysis, Information Theory, Genetic Algorithm, Distributed Control System, Industrial Control, Motors and Appliances, etc. The conference agenda was divided into two parts, including Keynote Speeches and Oral Presentations. ICICA 2022 is to bring together innovative academics and industrial experts in the field of Information, Control and Automation to a common forum. The primary goal of the conference is to promote research and developmental activities in Information, Control and Automation and another goal is to promote scientific information interchange between researchers, developers, engineers, students, and practitioners working all around the world. The conference will be held every year to make it an ideal platform for people to share views and experiences in Information, Control and Automation and related areas. Everyone interested in these fields were welcomed to join the online conference and to give comments and raise questions to the speeches and presentations.
Download or read book The Simulation and Analyisis of RFID Anti collision Algorithms and One Method to Improve BTSA Algorithm written by Xuzhong Chen and published by . This book was released on 2014 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goals of this research are the analysis and review of current Radio Frequency Identification (RFlD) anti-collision algorithms and the improvement of the binary tree slot ALOHA algorithm. The improved binary tree slot ALOHA (BTSA) algorithm makes the system efficiency greater than do the original algorithms. The new algorithm keeps the system efficiency higher than 40%, when the numbers of tags are greater than 100. When the length of frame is equal to the number of tags in the interrogation area, the system works best. So the key to improving the RFID anti-collision algorithm is finding the number of tags in the interrogation area and then resetting the frame, which makes it as close as the number of tags. The research collects and analyzes the distributions of the collision, when the number of tags falls between 10 and 1000. The research makes those data become a table. After that, the improved BTSA algorithm uses several slots to build an estimation section. The estimate section is the first three slots in the first frame. The improved BTSA algorithm compares the data in the estimate section to the table of distribution, and then finds the number of tags in the interrogation area. After the system gets the number of tags in the interrogation area, the reader resets the length of frame, which keeps the system working in the best situation. After the research analyzes and summarizes the distribution of collisions, it produces the simple protocol to improve the current BTSA algorithm. The first frame is equal to 64. According to the data in the estimate section, if more than two slots in the estimate section are idle slots, the system will reset the frame to 32. If there is any one slot in the three slots that is greater than 5 collisions, the system will reset the frame to 256. According to the distributions of collisions, the improved BTSA algorithm resets the frame. The values of those two points are obtained by data analysis. The simulation result shows that the system efficiency keeps greater than 40%, when the number of tags is between 100 and 1000. When the number of tags is greater than 300 (300, 400, 500) or less then 40, the system will reset the frame. The improved BTSA algorithm successfully keeps the system efficiency higher than 40% when the number of tags is greater than 100. The improved protocol is much easier than current protocols. Using the same method and programs, future research can get the distributions of collisions in different simulation conditions and improve protocols in different systems.
Download or read book Applied Mechanics Mechatronics And Intelligent Systems Proceedings Of The 2015 International Conference Ammis2015 written by Shihong Qin and published by World Scientific. This book was released on 2015-12-08 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of one hundred and twenty-five selected papers presented at the 2015 International Conference on Applied Mechanics, Mechatronics and Intelligent Systems (AMMIS2015), which was held in Nanjing, China during June 19-20, 2015.AMMIS2015 focuses on seven main areas, namely, applied mechanics, control and automation, intelligent systems, computer technology, electronics engineering, electrical engineering, and materials science and technology. Experts in this field from all over the world contributed to the collection of research results and development activities.AMMIS2015 provides an excellent international exchange platform for researchers to share their development works and results in these areas. All papers selected for this proceeding were subjected to a rigorous peer-review process.
Download or read book Implementation of RFID Anti Collision Algorithm for EPCglobal Gen2 Protocol written by 張景超 and published by . This book was released on 2012 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book RFID Design Principles written by Harvey Lehpamer and published by Artech House. This book was released on 2012 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition features numerous updates and new and expanded material on emerging topics such as the medical applications of RFID and new ethical challenges in the field. Offering a detailed understanding of RFID design essentials, key applications, and important management issues, it explores the role of RFID technology in supply chain management, intelligent building design, transportation systems, military applications, and numerous other applications, and explains the design of RFID circuits, antennas, interfaces, data encoding schemes, and complete systems. Starting with the basics of RF and microwave propagation, discusses major system components including tags and readers. This hands-on reference distills the latest RFID standards, and examines RFID at work in supply chain management, intelligent buildings, intelligent transportation systems, and tracking animals. RFID is controversial among privacy and consumer advocates, and this book looks at every angle concerning security, ethics, and protecting consumer data
Download or read book Development and Implementation of RFID Technology written by Cristina Turcu and published by BoD – Books on Demand. This book was released on 2009-01-01 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book generously covers a wide range of aspects and issues related to RFID systems, namely the design of RFID antennas, RFID readers and the variety of tags (e.g. UHF tags for sensing applications, surface acoustic wave RFID tags, smart RFID tags), complex RFID systems, security and privacy issues in RFID applications, as well as the selection of encryption algorithms. The book offers new insights, solutions and ideas for the design of efficient RFID architectures and applications. While not pretending to be comprehensive, its wide coverage may be appropriate not only for RFID novices but also for experienced technical professionals and RFID aficionados.
Download or read book Microelectronics Electromagnetics and Telecommunications written by Suresh Chandra Satapathy and published by Springer. This book was released on 2015-12-24 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 73 papers presented at ICMEET 2015: International Conference on Microelectronics, Electromagnetics and Telecommunications. The conference was held during 18 – 19 December, 2015 at Department of Electronics and Communication Engineering, GITAM Institute of Technology, GITAM University, Visakhapatnam, INDIA. This volume contains papers mainly focused on Antennas, Electromagnetics, Telecommunication Engineering and Low Power VLSI Design.
Download or read book Design and Modeling of Low Power Active RFID Protocol Processor written by Kimiya Hajkazemshirazi and published by . This book was released on 2010 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Anti Collision Algorithms for Multi Tag RFID written by Geng Shu-qin and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: It is an important problem to enhance the tag identification efficiency. When the number of tags is large, for the conventional RFID anti-collision algorithm the number of slots required to read the tags increases exponentially as the number of tags does. The proposed IDFSA algorithm may solve this problem by grouping the tags in different frequency channel, saving the time of grouping with estimation. In every frequency channel, DFSA is used to.
Download or read book The Internet of Things written by Lu Yan and published by CRC Press. This book was released on 2008-03-05 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ubiquitous and pervasive technologies such as RFID and smart computing promise a world of networked and interconnected devices. Everything from tires to toothbrushes could soon be in communications range, heralding the dawn of an era in which today's Internet of People gives way to tomorrow's Internet of Things- where billions of obje
Download or read book Tag Anti collision Resolution for Improved Quality of RFID Data Streams written by Prapassara Pupunwiwat and published by . This book was released on 2012 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract : Radio Frequency Identication (RFID) is a technology that allows automatic identication of people or objects by incorporating the use of radio frequency waves to transmit data between networked electromagnetic readers and tags. RFID is considered an emerging technology for advancing a wide range of applications, such as supply chain management and distribution. However, despite the extensive development of the RFID technology in many areas, the RFID tags collision problems remain a serious issue. Collision problems occur due to the simultaneous presence of multiple numbers of tags within the reader zone. To solve collision problems, dierent anti-collision methods have been mentioned in literature. These methods are either insucient or too complex, with a high overhead cost of implementation. In this work, in order to improve the quality of RFID data collection, we propose novel deterministic and probabilistic anti-collision approaches. The main contributions of this study are summarised as follows: 1. We propose two novel deterministic anti-collision algorithms using combinations of Q-ary trees (Pupunwiwat and Stantic, 2009a, b, 2010c), with the intended goal to minimise memory usage queried by the RFID reader. By reducing the size of queries, the RFID reader can preserve memories, and the identication time can be improved. 2. We propose a novel frame-size estimation technique (Pupunwiwat and Stantic, 2010a, b) to minimise the number of slots and frames queried by the RFID reader and to maximise the system eciency. In addition, we introduce the probabilistic group-based anti-collision method (Pupunwiwat and Stantic, 2010d) to improve the overall performance of the tag recognition process. 3. We evaluate our proposed anti-collision techniques and perform a comparative anal- ysis, in order to nd the benets and disadvantages of each method. Additionally, in order to identify the best selection of anti-collision method, we propose two strate- gies for selective anti-collision technique management, i.e. a Novel Decision Tree Strategy and a Six Thinking Hats Strategy (Pupunwiwat et al., 2011). By correctly identifying the most suitable anti-collision method for specic scenarios, the quality of data collection can be improved.
