Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 1948 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Grid Converters for Photovoltaic and Wind Power Systems written by Remus Teodorescu and published by John Wiley & Sons. This book was released on 2011-07-28 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grid converters are the key player in renewable energy integration. The high penetration of renewable energy systems is calling for new more stringent grid requirements. As a consequence, the grid converters should be able to exhibit advanced functions like: dynamic control of active and reactive power, operation within a wide range of voltage and frequency, voltage ride-through capability, reactive current injection during faults, grid services support. This book explains the topologies, modulation and control of grid converters for both photovoltaic and wind power applications. In addition to power electronics, this book focuses on the specific applications in photovoltaic wind power systems where grid condition is an essential factor. With a review of the most recent grid requirements for photovoltaic and wind power systems, the book discusses these other relevant issues: modern grid inverter topologies for photovoltaic and wind turbines islanding detection methods for photovoltaic systems synchronization techniques based on second order generalized integrators (SOGI) advanced synchronization techniques with robust operation under grid unbalance condition grid filter design and active damping techniques power control under grid fault conditions, considering both positive and negative sequences Grid Converters for Photovoltaic and Wind Power Systems is intended as a coursebook for graduated students with a background in electrical engineering and also for professionals in the evolving renewable energy industry. For people from academia interested in adopting the course, a set of slides is available for download from the website. www.wiley.com/go/grid_converters
Download or read book Computational Paradigm Techniques for Enhancing Electric Power Quality written by L. Ashok Kumar and published by CRC Press. This book was released on 2018-11-15 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focusses on power quality improvement and enhancement techniques with aid of intelligent controllers and experimental results. It covers topics ranging from the fundamentals of power quality indices, mitigation methods, advanced controller design and its step by step approach, simulation of the proposed controllers for real time applications and its corresponding experimental results, performance improvement paradigms and its overall analysis, which helps readers understand power quality from its fundamental to experimental implementations. The book also covers implementation of power quality improvement practices. Key Features Provides solution for the power quality improvement with intelligent techniques Incorporated and Illustrated with simulation and experimental results Discusses renewable energy integration and multiple case studies pertaining to various loads Combines the power quality literature with power electronics based solutions Includes implementation examples, datasets, experimental and simulation procedures
Download or read book Proceedings of the 16th Intersociety Energy Conversion Engineering Conference Atlanta Georgia August 9 14 1981 written by and published by . This book was released on 1981 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science Abstracts written by and published by . This book was released on 1965 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power Electronics Handbook written by Muhammad H. Rashid and published by Elsevier. This book was released on 2023-09-27 with total page 1472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Handbook, Fifth Edition delivers an expert guide to power electronics and their applications. The book examines the foundations of power electronics, power semiconductor devices, and power converters, before reviewing a constellation of modern applications. Comprehensively updated throughout, this new edition features new sections addressing current practices for renewable energy storage, transmission, integration, and operation, as well as smart-grid security, intelligent energy, artificial intelligence, and machine learning applications applied to power electronics, and autonomous and electric vehicles. This handbook is aimed at practitioners and researchers undertaking projects requiring specialist design, analysis, installation, commissioning, and maintenance services. - Provides a fully comprehensive work addressing each aspect of power electronics in painstaking depth - Delivers a methodical technical presentation in over 1500 pages - Includes 50+ contributions prepared by leading experts - Offers practical support and guidance with detailed examples and applications for lab and field experimentation - Includes new technical sections on smart-grid security and intelligent energy, artificial intelligence, and machine learning applications applied to power electronics and autonomous and electric vehicles - Features new chapter level templates and a narrative progression to facilitate understanding
Download or read book Resonant Power Converters written by Marian K. Kazimierczuk and published by John Wiley & Sons. This book was released on 2012-11-07 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to resonant energy conversion in power electronics. It is a practical, systematic guide to the analysis and design of various dc-dc resonant inverters, high-frequency rectifiers, and dc-dc resonant converters that are building blocks of many of today's high-frequency energy processors. Designed to function as both a superior senior-to-graduate level textbook for electrical engineering courses and a valuable professional reference for practicing engineers, it provides students and engineers with a solid grasp of existing high-frequency technology, while acquainting them with a number of easy-to-use tools for the analysis and design of resonant power circuits. Resonant power conversion technology is now a very hot area and in the center of the renewable energy and energy harvesting technologies.
Download or read book Op Amps for Everyone written by Ron Mancini and published by Newnes. This book was released on 2003 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: The operational amplifier ("op amp") is the most versatile and widely used type of analog IC, used in audio and voltage amplifiers, signal conditioners, signal converters, oscillators, and analog computing systems. Almost every electronic device uses at least one op amp. This book is Texas Instruments' complete professional-level tutorial and reference to operational amplifier theory and applications. Among the topics covered are basic op amp physics (including reviews of current and voltage division, Thevenin's theorem, and transistor models), idealized op amp operation and configuration, feedback theory and methods, single and dual supply operation, understanding op amp parameters, minimizing noise in op amp circuits, and practical applications such as instrumentation amplifiers, signal conditioning, oscillators, active filters, load and level conversions, and analog computing. There is also extensive coverage of circuit construction techniques, including circuit board design, grounding, input and output isolation, using decoupling capacitors, and frequency characteristics of passive components. The material in this book is applicable to all op amp ICs from all manufacturers, not just TI. Unlike textbook treatments of op amp theory that tend to focus on idealized op amp models and configuration, this title uses idealized models only when necessary to explain op amp theory. The bulk of this book is on real-world op amps and their applications; considerations such as thermal effects, circuit noise, circuit buffering, selection of appropriate op amps for a given application, and unexpected effects in passive components are all discussed in detail. *Published in conjunction with Texas Instruments *A single volume, professional-level guide to op amp theory and applications *Covers circuit board layout techniques for manufacturing op amp circuits.
Download or read book International Conference on Power Electronics and Variable Speed Drives 1 4 May 1984 written by Institution of Electrical Engineers. Power Division and published by . This book was released on 1984 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book European Electronics Directory 1994 written by C.G. Wedgwood and published by Elsevier. This book was released on 2013-10-22 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: Companion volume to Components and Sub-Assemblies Directory, providing access to 8000 manufacturers, agents and representatives of electronics systems and equipment. Entries include names of key managers, addresses, fax/telephone numbers, and pocket descriptions of manufacturing and sales programmes. There is also a product index to track the companies involved in any given business lines.
Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1989 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1973- cover the entire IEEE technical literature.
Download or read book Eighth International Conference on Power Electronics and Variable Speed Drives written by and published by Institution of Electrical Engineers. This book was released on 2000 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title constitutes the proceedings of the Eighth International Conference on Power Electronics and Variable Speed Drives. There are 99 papers altogether.
Download or read book Coatings on Glass 1998 written by H. Pulker and published by Elsevier. This book was released on 1999-11-26 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference provided a forum where researchers and industrialists working with glass and thin films, could meet and discuss common, complex problems. Many apparently old fundamental procedures and processes are still under investigation, due to their complexity. In particular it is often so that experience dictates the operating conditions, e.g. a special glass treatment or a special coating process rather than the understanding of the treatment or the process itself. It was therefore the aim of this conference to discuss the various problems and to deepen the knowledge that is useful for industrial situations. Based on the fundamental steps of glass fabrication, modification and film deposition, and property studies and the search for possible applications, a wide range of glass and plastic treatments have been carefully considered in this book by experts working in the field.
Download or read book Cumulative Index to Entire IEEE Group Transactions journals 1951 1971 Subject written by Nichigai Asoshiētsu and published by . This book was released on 1973 with total page 1156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book DC DC Converter Topologies written by Gerry Moschopoulos and published by John Wiley & Sons. This book was released on 2024-01-31 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive look at DC-DC converters and advanced power converter topologies for all skills levels As it can be rare for source voltage to meet the requirements of a Direct Current (DC) load, DC-DC converters are essential to access service. DC-DC power converters employ power semiconductor devices (like MOSFETs and IGBTs) as switches and passive elements such as capacitors, inductors, and transformers to alter the voltage provided by a DC source into the necessary DC voltage as is required by a DC load. This source can be a battery, solar panels, fuel cells, or a DC bus voltage fed by rectified AC utility voltage. As the many components of DC-DC converters can be differently arranged into circuit structures called topologies, there are as many possible circuit topologies as there are possible combinations of circuit elements. Focusing on DC-DC switch-mode power converters ranging from 50 W to 10kW, DC-DC Converter Topologies provides a survey of all converter topology types within this power range. General principles are described for each topology type using a representative converter as an example. Variations that can be found that differ from the example are then examined, with a helpful discussion of comparisons when relevant. A broad range of topics is covered within the book, from simple, low-power converters to complex, high-power converters and everywhere in between. DC-DC Converter Topologies readers will also find: A detailed discussion of four key DC-DC converter topologies Description of isolated two-switch pulse-width modulated (PWM) topologies including push-pull, half-bridge, and interleaved converters An exploration of high-gain converters such as coupled inductors, voltage multipliers, and switched capacitor converters This book provides the tools so that a non-expert will be equipped to deal with the vast array of DC-DC converters that presently exist. As such, DC-DC Converter Topologies is a useful reference for electrical engineers, professors, and graduate students studying in the field.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1997 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Engineer written by and published by . This book was released on 1975 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt:
