Download or read book Design and Characterization of an 8x8 Lateral Detector Array for Digital X ray Imaging written by Christos Hristovski and published by . This book was released on 2010 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray imaging has become one of the most pervasive and effective means of diagnosis in medical clinics today. As more imaging systems transition to digital modes of capture and storage, new applications of x-ray imaging, such as tomosynthesis, become feasible. These new imaging modalities have the potential to expose patients to large amounts of radiation so the necessity to use sensitive imagers that reduce dose and increase contrast is essential. An experimental design that utilizes laterally oriented detectors and amorphous semiconductors on crystalline silicon substrates has been undertaken in this study. Emphasis on fabricating a device suitable for medical x-ray imaging is the key principle throughout the design process. This study investigates the feasibility and efficiency of a new type of x-ray imager that combines the high speed, low noise, and potential complexity of CMOS circuit design with the high responsivity, large area uniformity, and flexibility of amorphous semiconductors. Results show that the design tradeoffs made in order to create a low cost, high fill factor, and high speed imager are realistic. The device exhibits good responsivity to optical light, possesses a sufficient capacitive well, and maintains CMOS characteristics. This study demonstrates that with sufficient optimization it may be possible to design and deploy real time x-ray system on chip imagers similar to those used in optical imaging.
Download or read book The Photomultiplier Handbook written by A. G. Wright and published by Oxford University Press. This book was released on 2017 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Photomultipliers are extremely sensitive light detectors with the capability to detect single photons. In multiplying the charge produced by incident light by up to 100 million times, these devices are essential to a wide range of applications, from medical instrumentation to astronomical observations. This complete and authoritative guide will provide...a deeper understanding of the operating principles of these devices." -- Publisher's description, back cover.
Download or read book Semiconductor Detector Systems written by Helmuth Spieler and published by OUP Oxford. This book was released on 2005-08-25 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor sensors patterned at the micron scale combined with custom-designed integrated circuits have revolutionized semiconductor radiation detector systems. Designs covering many square meters with millions of signal channels are now commonplace in high-energy physics and the technology is finding its way into many other fields, ranging from astrophysics to experiments at synchrotron light sources and medical imaging. This book is the first to present a comprehensive discussion of the many facets of highly integrated semiconductor detector systems, covering sensors, signal processing, transistors and circuits, low-noise electronics, and radiation effects. The diversity of design approaches is illustrated in a chapter describing systems in high-energy physics, astronomy, and astrophysics. Finally a chapter "Why things don't work" discusses common pitfalls. Profusely illustrated, this book provides a unique reference in a key area of modern science.
Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1994 with total page 1084 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Medical Image Reconstruction written by Gengsheng Zeng and published by Springer Science & Business Media. This book was released on 2010-12-28 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Medical Image Reconstruction: A Conceptual Tutorial" introduces the classical and modern image reconstruction technologies, such as two-dimensional (2D) parallel-beam and fan-beam imaging, three-dimensional (3D) parallel ray, parallel plane, and cone-beam imaging. This book presents both analytical and iterative methods of these technologies and their applications in X-ray CT (computed tomography), SPECT (single photon emission computed tomography), PET (positron emission tomography), and MRI (magnetic resonance imaging). Contemporary research results in exact region-of-interest (ROI) reconstruction with truncated projections, Katsevich's cone-beam filtered backprojection algorithm, and reconstruction with highly undersampled data with l0-minimization are also included. This book is written for engineers and researchers in the field of biomedical engineering specializing in medical imaging and image processing with image reconstruction. Gengsheng Lawrence Zeng is an expert in the development of medical image reconstruction algorithms and is a professor at the Department of Radiology, University of Utah, Salt Lake City, Utah, USA.
Download or read book From X ray Binaries to Quasars Black Holes on All Mass Scales written by Thomas J. Maccarone and published by Springer Science & Business Media. This book was released on 2006-01-10 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of papers using the relative advantages of studying stellar mass and supermassive black holes. The topics discussed here include the state of the art in black hole observational and theoretical work-variability, spectroscopy, disk-jet connections, and multi-wavelength campaigns on black holes.
Download or read book Image Processing written by Tinku Acharya and published by John Wiley & Sons. This book was released on 2005-10-03 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Image processing-from basics to advanced applications Learn how to master image processing and compression with this outstanding state-of-the-art reference. From fundamentals to sophisticated applications, Image Processing: Principles and Applications covers multiple topics and provides a fresh perspective on future directions and innovations in the field, including: * Image transformation techniques, including wavelet transformation and developments * Image enhancement and restoration, including noise modeling and filtering * Segmentation schemes, and classification and recognition of objects * Texture and shape analysis techniques * Fuzzy set theoretical approaches in image processing, neural networks, etc. * Content-based image retrieval and image mining * Biomedical image analysis and interpretation, including biometric algorithms such as face recognition and signature verification * Remotely sensed images and their applications * Principles and applications of dynamic scene analysis and moving object detection and tracking * Fundamentals of image compression, including the JPEG standard and the new JPEG2000 standard Additional features include problems and solutions with each chapter to help you apply the theory and techniques, as well as bibliographies for researching specialized topics. With its extensive use of examples and illustrative figures, this is a superior title for students and practitioners in computer science, wireless and multimedia communications, and engineering.
Download or read book Advances in Array Optimization written by Ertugrul Aksoy and published by BoD – Books on Demand. This book was released on 2020-03-04 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to develop technology and communication necessitates the design of flexible and high-capacity radiating systems in today's communication infrastructure. In this context, antenna arrays are the ideal solution and have been one of the priority research subjects of the science community dealing with electromagnetics from past to present. Optimization of an array may be performed in various ways such as the optimization of excitation, reflector structure, feed network, etc. depending on the array structure. This book is a collection of seven research studies focused on the optimization of array structures in classical phased array or time modulation, including radiator, reflector, feed network, and radiating element optimizations.
Download or read book The Micro doppler Effect in Radar written by Victor C. Chen and published by Artech House. This book was released on 2011 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Doppler Effect can be thought of as the change in frequency of a wave for an observer moving relative to the source of the wave. In radar, it is used to measure the velocity of detected objects. This highly practical resource provides thorough working knowledge of the micro-Doppler effect in radar, including its principles, applications and implementation with MATLAB codes. The book presents code for simulating radar backscattering from targets with various motions, generating micro-Doppler signatures, and analyzing the characteristics of targets. In this title, professionals will find detailed descriptions of the physics and mathematics of the Doppler and micro-Doppler effect. The book provides a wide range of clear examples, including an oscillating pendulum, a spinning and precession heavy top, rotating rotor blades of a helicopter, rotating wind-turbine blades, a person walking with swinging arms and legs, a flying bird, and movements of quadruped animals.
Download or read book The Fingerprint written by U. S. Department Justice and published by Createspace Independent Publishing Platform. This book was released on 2014-08-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea of The Fingerprint Sourcebook originated during a meeting in April 2002. Individuals representing the fingerprint, academic, and scientific communities met in Chicago, Illinois, for a day and a half to discuss the state of fingerprint identification with a view toward the challenges raised by Daubert issues. The meeting was a joint project between the International Association for Identification (IAI) and West Virginia University (WVU). One recommendation that came out of that meeting was a suggestion to create a sourcebook for friction ridge examiners, that is, a single source of researched information regarding the subject. This sourcebook would provide educational, training, and research information for the international scientific community.
Download or read book An Introduction to Splines for Use in Computer Graphics and Geometric Modeling written by Richard H. Bartels and published by Morgan Kaufmann. This book was released on 1995-09 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the field of computer graphics develops, techniques for modeling complex curves and surfaces are increasingly important. A major technique is the use of parametric splines in which a curve is defined by piecing together a succession of curve segments, and surfaces are defined by stitching together a mosaic of surface patches. An Introduction to Splines for Use in Computer Graphics and Geometric Modeling discusses the use of splines from the point of view of the computer scientist. Assuming only a background in beginning calculus, the authors present the material using many examples and illustrations with the goal of building the reader's intuition. Based on courses given at the University of California, Berkeley, and the University of Waterloo, as well as numerous ACM Siggraph tutorials, the book includes the most recent advances in computer-aided geometric modeling and design to make spline modeling techniques generally accessible to the computer graphics and geometric modeling communities.
Download or read book CT Scanning written by Karupppasamy Subburaj and published by BoD – Books on Demand. This book was released on 2011-10-03 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its introduction in 1972, X-ray computed tomography (CT) has evolved into an essential diagnostic imaging tool for a continually increasing variety of clinical applications. The goal of this book was not simply to summarize currently available CT imaging techniques but also to provide clinical perspectives, advances in hybrid technologies, new applications other than medicine and an outlook on future developments. Major experts in this growing field contributed to this book, which is geared to radiologists, orthopedic surgeons, engineers, and clinical and basic researchers. We believe that CT scanning is an effective and essential tools in treatment planning, basic understanding of physiology, and and tackling the ever-increasing challenge of diagnosis in our society.
Download or read book Neutron Personnel Dosimetry written by Robert B. Schwartz and published by . This book was released on 1987 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanofabrication written by Ampere A. Tseng and published by World Scientific. This book was released on 2008 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the devices and systems used in modern industry are becoming progressively smaller and have reached the nanoscale domain. Nanofabrication aims at building nanoscale structures, which can act as components, devices, or systems, in large quantities at potentially low cost. Nanofabrication is vital to all nanotechnology fields, especially for the realization of nanotechnology that involves the traditional areas across engineering and science. This is the first book solely dedicated to the manufacturing technology in nanoscale structures, devices, and systems and is designed to satisfy the growing demands of researchers, professionals, and graduate students. Both conventional and non-conventional fabrication technologies are introduced with emphasis on multidisciplinary principles, methodologies, and practical applications. While conventional technologies consider the emerging techniques developed for next generation lithography, non-conventional techniques include scanning probe microscopy lithography, self-assembly, and imprint lithography, as well as techniques specifically developed for making carbon tubes and molecular circuits and devices. Sample Chapter(s). Chapter 1: Atom, Molecule, and Nanocluster Manipulations for Nanostructure Fabrication Using Scanning Probe Microscopy (3,320 KB). Contents: Atomic Force Microscope Lithography (N Kawasegi et al.); Nanowire Assembly and Integration (Z Gu & D H Gracias); Extreme Ultraviolet Lithography (H Kinoshita); Electron Projection Lithography (T Miura et al.); Electron Beam Direct Writing (K Yamazaki); Electron Beam Induced Deposition (K Mitsuishi); Focused Ion Beams and Interaction with Solids (T Ishitani et al.); Nanofabrication of Nanoelectromechanical Systems (NEMS): Emerging Techniques (K L Ekinci & J Brugger); and other papers. Readership: Researchers, professionals, and graduate students in the fields of nanoengineering and nanoscience.
Download or read book Wafer Bonding written by Marin Alexe and published by Springer Science & Business Media. This book was released on 2004-05-14 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decade direct wafer bonding has developed into a mature materials integration technology. This book presents state-of-the-art reviews of the most important applications of wafer bonding written by experts from industry and academia. The topics include bonding-based fabrication methods of silicon-on-insulator, photonic crystals, VCSELs, SiGe-based FETs, MEMS together with hybrid integration and laser lift-off. The non-specialist will learn about the basics of wafer bonding and its various application areas, while the researcher in the field will find up-to-date information about this fast-moving area, including relevant patent information.
Download or read book 14 MeV Neutrons written by Vladivoj Valkovic and published by CRC Press. This book was released on 2015-08-25 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the often difficult and time-consuming effort of performing experiments with fast (14 MeV) neutrons, these neutrons can offer special insight into nucleus and other materials because of the absence of charge. 14 MeV Neutrons: Physics and Applications explores fast neutrons in basic science and applications to problems in medicine, the envir
Download or read book Advances in Intelligent Systems written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2001-11-30 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent Systems involve a large class of systems which posses human-like capabilities such as learning, observation, perception, interpretation, reasoning under uncertainty, planning in known and unknown environments, decision making, and control action. The field of intelligent systems is actually a new interdisciplinary field which is the outcome of the interaction, cooperation and synergetic merging of classical fields such as system theory, control theory, artificial intelligence, information theory, operational research, soft computing, communications, linguistic theory, and others. Integrated intelligent decision and control systems involve three primary hierarchical levels, namely organization, coordination and execution levels. As we proceed from the be performed organization to the execution level, the precision about the jobs to increases and accordingly the intelligence required for these jobs decreases. This is in compliance with the principle of increasing precision with decreasing intelligence (IPOI) known from the management field and theoretically established by Saridis using information theory concepts. This book is concerned with intelligent systems and techniques and gives emphasis on the computational and processing issues. Control issues are not included here. The contributions of the book are presented in four parts as follows.
