Download or read book Design and Application of Robust Reduced Order Hybrid Position and Force Controllers for a Two Link Flexible Manipulator written by David E. Bossert and published by . This book was released on 1996-05-01 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research focuses on the design and application of robust reduced-order hybrid position and force controllers on a two-link flexible manipulator. The first part of the research examines the design aspect of the hybrid controllers. Traditionally, full-order controllers are used in common techniques such as Linear-Quadratic-Gaussian (LQG) control. If the plant is of large order, then the resulting controller is also of large order. Full-order controllers have the disadvantages of requiring large amounts of memory as well as using excessive computational time. In addition, LQG-class controllers are only guaranteed to work at the design condition. With the use of the direct- optimization tool SANDY, reduced-order controllers are designed directly for several plant conditions (robustness). The experimental results show that the robust reduced-order SANDY controllers provide comparable performance to the full-order LQG controllers in the applications of position control, force control, and hybrid position and force control.
Download or read book Robust Control Algorithms for Two link Flexible Manipulators written by Kshetrimayum Lochan and published by CRC Press. This book was released on 2024-10-13 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various modelling and control of two-link flexible manipulators are presented in this book. The lumped parameter modelling method and the assumed modes method modelling are comprehensively reviewed. The book also reviews the trajectory tracking problem and tip trajectory tracking problem along with the suppression of tip deflection of the links. An exponential time varying signal and a chaotic signal are considered as the desired trajectories. The identical/ non-identical slave manipulator is synchronised with the controlled master manipulator so that the slave manipulator indirectly follows the desired manipulator.
Download or read book Robust Control Algorithms for Flexible Manipulators written by Kshetrimayum Lochan and published by CRC Press. This book was released on 2024-10-13 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various modelling and control of two-link flexible manipulators are presented in this book. The lumped parameter modelling method and the assumed modes method modelling are comprehensively reviewed. The book also reviews the trajectory tracking problem and tip trajectory tracking problem along with the suppression of tip deflection of the links. An exponential time varying signal and a chaotic signal are considered as the desired trajectories. The identical/ non-identical slave manipulator is synchronised with the controlled master manipulator so that the slave manipulator indirectly follows the desired manipulator.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1988 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Studies of Flexible Robotic Manipulators written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flexible Robot Manipulators written by M. Osman Tokhi and published by IET. This book was released on 2008-05-20 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest developmens in modelling, simulation and control of flexible robot manipulators. Coverage includes an overall review of previously developed methodologies, a range of modelling approaches including classical techniques, parametric and neuromodelling approaches and numerical modelling/simulation techniques.
Download or read book Computer Control Abstracts written by and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 11th International Conference on Modelling Identification and Control ICMIC2019 written by Rui Wang and published by Springer Nature. This book was released on 2019-12-03 with total page 1340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes original, peer-reviewed research papers from the 11th International Conference on Modelling, Identification and Control (ICMIC2019), held in Tianjin, China on July 13-15, 2019. The topics covered include but are not limited to: System Identification, Linear/Nonlinear Control Systems, Data-driven Modelling and Control, Process Modelling and Process Control, Fault Diagnosis and Reliable Control, Intelligent Systems, and Machine Learning and Artificial Intelligence.The papers showcased here share the latest findings on methodologies, algorithms and applications in modelling, identification, and control, integrated with Artificial Intelligence (AI), making the book a valuable asset for researchers, engineers, and university students alike.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intelligent Robotics and Applications written by Haibin Yu and published by Springer. This book was released on 2019-08-05 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume set LNAI 11740 until LNAI 11745 constitutes the proceedings of the 12th International Conference on Intelligent Robotics and Applications, ICIRA 2019, held in Shenyang, China, in August 2019. The total of 378 full and 25 short papers presented in these proceedings was carefully reviewed and selected from 522 submissions. The papers are organized in topical sections as follows: Part I: collective and social robots; human biomechanics and human-centered robotics; robotics for cell manipulation and characterization; field robots; compliant mechanisms; robotic grasping and manipulation with incomplete information and strong disturbance; human-centered robotics; development of high-performance joint drive for robots; modular robots and other mechatronic systems; compliant manipulation learning and control for lightweight robot. Part II: power-assisted system and control; bio-inspired wall climbing robot; underwater acoustic and optical signal processing for environmental cognition; piezoelectric actuators and micro-nano manipulations; robot vision and scene understanding; visual and motional learning in robotics; signal processing and underwater bionic robots; soft locomotion robot; teleoperation robot; autonomous control of unmanned aircraft systems. Part III: marine bio-inspired robotics and soft robotics: materials, mechanisms, modelling, and control; robot intelligence technologies and system integration; continuum mechanisms and robots; unmanned underwater vehicles; intelligent robots for environment detection or fine manipulation; parallel robotics; human-robot collaboration; swarm intelligence and multi-robot cooperation; adaptive and learning control system; wearable and assistive devices and robots for healthcare; nonlinear systems and control. Part IV: swarm intelligence unmanned system; computational intelligence inspired robot navigation and SLAM; fuzzy modelling for automation, control, and robotics; development of ultra-thin-film, flexible sensors, and tactile sensation; robotic technology for deep space exploration; wearable sensing based limb motor function rehabilitation; pattern recognition and machine learning; navigation/localization. Part V: robot legged locomotion; advanced measurement and machine vision system; man-machine interactions; fault detection, testing and diagnosis; estimation and identification; mobile robots and intelligent autonomous systems; robotic vision, recognition and reconstruction; robot mechanism and design. Part VI: robot motion analysis and planning; robot design, development and control; medical robot; robot intelligence, learning and linguistics; motion control; computer integrated manufacturing; robot cooperation; virtual and augmented reality; education in mechatronics engineering; robotic drilling and sampling technology; automotive systems; mechatronics in energy systems; human-robot interaction.
Download or read book Smart Materials and Structures written by G.R Tomlinson and published by CRC Press. This book was released on 1998-01-01 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant changes have occurred in materials science, including increasing demands on life extensions, and the reliability and exploitability of components, materials, and structures. These changes provide smart technologies with excellent application opportunities in aerospace, civil and electrical engineering, transportation, manufacturing, com
Download or read book New Trends in Observer based Control written by Olfa Boubaker and published by Academic Press. This book was released on 2019-08-23 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Trends in Observer-Based Control: A Practical Guide to Process and Engineering Applications presents a concise introduction to the latest advances in observer-based control design. The book gives a comprehensive tutorial on new trends in the design of observer-based controllers for which the separation principle is well established. It covers a wide range of applications, also including worked examples that make it ideal for both advanced courses and researchers starting work in the field. This book is also particularly suitable for engineers who want to quickly and efficiently enter the field. Presents a clear-and-concise introduction to the latest advances in observer-based control design Offers content on many facets of observer-based control design Discusses key applications in the fields of power systems, robotics and mechatronics, flight and automotive systems
Download or read book Fusion of Hard and Soft Control Strategies for the Robotic Hand written by Cheng-Hung Chen and published by John Wiley & Sons. This book was released on 2017-09-13 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth review of hybrid control techniques for smart prosthetic hand technology by two of the world’s pioneering experts in the field Long considered the stuff of science fiction, a prosthetic hand capable of fully replicating all of that appendage’s various functions is closer to becoming reality than ever before. This book provides a comprehensive report on exciting recent developments in hybrid control techniques—one of the most crucial hurdles to be overcome in creating smart prosthetic hands. Coauthored by two of the world’s foremost pioneering experts in the field, Fusion of Hard and Soft Control Strategies for Robotic Hand treats robotic hands for multiple applications. Itbegins withan overview of advances in main control techniques that have been made over the past decade before addressing the military context for affordable robotic hand technology with tactile and/or proprioceptive feedback for hand amputees. Kinematics, homogeneous transformations, inverse and differential kinematics, trajectory planning, and dynamic models of two-link thumb and three-link index finger are discussed in detail. The remainder of the book is devoted to the most promising soft computing techniques, particle swarm optimization techniques, and strategies combining hard and soft controls. In addition, the book: Includes a report on exciting new developments in prosthetic/robotic hand technology, with an emphasis on the fusion of hard and soft control strategies Covers both prosthetic and non-prosthetic hand designs for everything from routine human operations, robotic surgery, and repair and maintenance, to hazardous materials handling, space applications, explosives disposal, and more Provides a comprehensive overview of five-fingered robotic hand technology kinematics, dynamics, and control Features detailed coverage of important recent developments in neuroprosthetics Fusion of Hard and Soft Control Strategies for Robotic Hand is a must-read for researchers in control engineering, robotic engineering, biomedical sciences and engineering, and rehabilitation engineering.
Download or read book Guidance and Control written by and published by . This book was released on 1996 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Current Trends in Nonlinear Systems and Control written by Laura Menini and published by Springer Science & Business Media. This book was released on 2006-09-13 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is an outgrowth of the workshop "Applications of Advanced Control Theory to Robotics and Automation, "organized in honor of the 70th birthdays of Petar V. Kokotovic and Salvatore (Turi) Nicosia. Both Petar and Turi have carried out distinguished work in the control community and have long been recognized as mentors, as well as experts and pioneers in the field of automatic control, covering many topics in control theory and several different applications. The variety of their research is reflected in this book, which includes contributions ranging from mathematics to laboratory experiments. The scope of the work is very broad, and although each chapter is self-contained, the book has been organized into thematically related chapters, which in some cases, suggest to the reader a convenient reading sequence. The great variety of topics covered and the almost tutorial writing style used by many of the authors will make this book suitable for both experts in the control field and young researchers who seek a more intuitive understanding of these relevant topics in the field.
Download or read book Guidance and Control 1996 written by Robert D. Culp and published by Univelt. This book was released on 1996 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1998 with total page 1234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1973- cover the entire IEEE technical literature.
