Download or read book Depot Maintenance Planning and Programming System DMPPS Volume 7 Feedback Subsystem written by Michael J. Lamatrice and published by . This book was released on 1978 with total page 67 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Depot Maintenance Planning and Programming System (DMPPS) is a large computer system developed by this Center (DTNSRDC) for the Naval Sea Systems Command (NAVSEA). The system was developed to project shipyard resource requirements (i.e., labor man-days and costs as well as material costs) by shipyard production shop and by ship work breakdown structure. It enables management to assess the impact on the shipyards and ship systems of: Changes in depot-level maintenance/alterations policy; Major changes in force levels and/or composition; and Budgetary constraints. DMPPS consists of a network of interdependent computer programs written in FORTRAN IV. It was developed at DTNSRDC using the CDC 6000 series computers and was subsequently converted for the IBM 360/370 series computers. It is now installed and operational at the NAVSEA 070 computer terminal (which accesses an IBM 370/168 computer). This document presents the IBM 360/370 version of the DMPPS program modules. Each of Volumes 2-7 of this document describes, in detail, one of the program's six subsystems. An executive summary of the entire DMPPS is presented in Volume 1 (AD-A048 416).
Download or read book Depot Maintenance Planning and Programming System DMPPS Volume 5 Synthesizer Subsystem written by Jean K. St Laurent and published by . This book was released on 1978 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DMPPS (Depot Maintenance Programming and Planning System) consists of several separate modules which interface through various files. The Synthesizer module, using the program XPLODE, combines the appropriate repair and alterations matrices with estimates of direct labor mandays required for each availability from the Depot Maintenance Assignment File (DMAF) and produces a Shop File, A SWBS File, and a SWBS-Shop Matrix File. These files, which show the distribution of the projected workloads among the 9 single-digit SWBS categories and the 20 shops (19 production shop categories plus other direct), are used by the Report Generator Subsystem (Volume 6) to produce summary reports.
Download or read book Government Reports Annual Index written by and published by . This book was released on 1978 with total page 1308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1978 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Depot Maintenance Planning and Programming System DMPPS Repair Profile Generation Programs written by Jay Madelbaum and published by . This book was released on 1977 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report documents the computer programs used for the development of the Depot Maintenance Planning and Programming System repair data base. The introduction presents an overview of the concepts behind the creation of the data base. Section 2 describes the programs which were used to convert raw input data into a usable format. Section 3 explains the program which analyzed the reformatted data. Section 4 documents the program which produced the actual elements of the repair data base after the analyses. (Author).
Download or read book A Directory of Computer Software Applications written by and published by . This book was released on 1979 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computers Control Information Theory written by and published by . This book was released on 1978 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamical Systems on Networks written by Mason Porter and published by Springer. This book was released on 2016-03-31 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a tutorial for the study of dynamical systems on networks. It discusses both methodology and models, including spreading models for social and biological contagions. The authors focus especially on “simple” situations that are analytically tractable, because they are insightful and provide useful springboards for the study of more complicated scenarios. This tutorial, which also includes key pointers to the literature, should be helpful for junior and senior undergraduate students, graduate students, and researchers from mathematics, physics, and engineering who seek to study dynamical systems on networks but who may not have prior experience with graph theory or networks. Mason A. Porter is Professor of Nonlinear and Complex Systems at the Oxford Centre for Industrial and Applied Mathematics, Mathematical Institute, University of Oxford, UK. He is also a member of the CABDyN Complexity Centre and a Tutorial Fellow of Somerville College. James P. Gleeson is Professor of Industrial and Applied Mathematics, and co-Director of MACSI, at the University of Limerick, Ireland.
Download or read book Intermediate level Image Processing written by M. J. B. Duff and published by . This book was released on 1986 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here are current and wide-ranging discussions of intermediate-level image processing. This volume identifies and fills the gap between low- and high-level image processing, and will be a vital reference for computer architects, computer scientists, and researchers in image processing.
Download or read book Proportional Optimization and Fairness written by Wieslaw Kubiak and published by Springer Science & Business Media. This book was released on 2008-11-16 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proportional Optimization and Fairness is a long-needed attempt to reconcile optimization with apportionment in just-in-time (JIT) sequences and find the common ground in solving problems ranging from sequencing mixed-model just-in-time assembly lines through just-in-time batch production, balancing workloads in event graphs to bandwidth allocation internet gateways and resource allocation in computer operating systems. The book argues that apportionment theory and optimization based on deviation functions provide natural benchmarks for a process, and then looks at the recent research and developments in the field. Individual chapters look at the theory of apportionment and just-in-time sequences; minimization of just-in-time sequence deviation; optimality of cyclic sequences and the oneness; bottleneck minimization; competition-free instances, Fraenkel’s Conjecture, and optimal admission sequences; response time variability; applications to the Liu-Layland Problem and pinwheel scheduling; temporal capacity constraints and supply chain balancing; fair queuing and stride scheduling; and smoothing and batching.
Download or read book Parameterized Algorithms written by Marek Cygan and published by Springer. This book was released on 2015-07-20 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive textbook presents a clean and coherent account of most fundamental tools and techniques in Parameterized Algorithms and is a self-contained guide to the area. The book covers many of the recent developments of the field, including application of important separators, branching based on linear programming, Cut & Count to obtain faster algorithms on tree decompositions, algorithms based on representative families of matroids, and use of the Strong Exponential Time Hypothesis. A number of older results are revisited and explained in a modern and didactic way. The book provides a toolbox of algorithmic techniques. Part I is an overview of basic techniques, each chapter discussing a certain algorithmic paradigm. The material covered in this part can be used for an introductory course on fixed-parameter tractability. Part II discusses more advanced and specialized algorithmic ideas, bringing the reader to the cutting edge of current research. Part III presents complexity results and lower bounds, giving negative evidence by way of W[1]-hardness, the Exponential Time Hypothesis, and kernelization lower bounds. All the results and concepts are introduced at a level accessible to graduate students and advanced undergraduate students. Every chapter is accompanied by exercises, many with hints, while the bibliographic notes point to original publications and related work.
Download or read book Decompositions of Graphs written by Juraj Bosák and published by Taylor & Francis US. This book was released on 1990 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Sparse Fourier Transform written by Haitham Hassanieh and published by Morgan & Claypool. This book was released on 2018-02-27 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourier transform is one of the most fundamental tools for computing the frequency representation of signals. It plays a central role in signal processing, communications, audio and video compression, medical imaging, genomics, astronomy, as well as many other areas. Because of its widespread use, fast algorithms for computing the Fourier transform can benefit a large number of applications. The fastest algorithm for computing the Fourier transform is the Fast Fourier Transform (FFT), which runs in near-linear time making it an indispensable tool for many applications. However, today, the runtime of the FFT algorithm is no longer fast enough especially for big data problems where each dataset can be few terabytes. Hence, faster algorithms that run in sublinear time, i.e., do not even sample all the data points, have become necessary. This book addresses the above problem by developing the Sparse Fourier Transform algorithms and building practical systems that use these algorithms to solve key problems in six different applications: wireless networks; mobile systems; computer graphics; medical imaging; biochemistry; and digital circuits. This is a revised version of the thesis that won the 2016 ACM Doctoral Dissertation Award.
Download or read book Computer Architecture written by Joseph D. Dumas II and published by CRC Press. This book was released on 2016-11-25 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Not only does almost everyone in the civilized world use a personal computer, smartphone, and/or tablet on a daily basis to communicate with others and access information, but virtually every other modern appliance, vehicle, or other device has one or more computers embedded inside it. One cannot purchase a current-model automobile, for example, without several computers on board to do everything from monitoring exhaust emissions, to operating the anti-lock brakes, to telling the transmission when to shift, and so on. Appliances such as clothes washers and dryers, microwave ovens, refrigerators, etc. are almost all digitally controlled. Gaming consoles like Xbox, PlayStation, and Wii are powerful computer systems with enhanced capabilities for user interaction. Computers are everywhere, even when we don’t see them as such, and it is more important than ever for students who will soon enter the workforce to understand how they work. This book is completely updated and revised for a one-semester upper level undergraduate course in Computer Architecture, and suitable for use in an undergraduate CS, EE, or CE curriculum at the junior or senior level. Students should have had a course(s) covering introductory topics in digital logic and computer organization. While this is not a text for a programming course, the reader should be familiar with computer programming concepts in at least one language such as C, C++, or Java. Previous courses in operating systems, assembly language, and/or systems programming would be helpful, but are not essential.
Download or read book Girish Karnad and Mahesh Dattani written by and published by . This book was released on 2012 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributed articles on Kannada plays of Girish Raghunath Karnad, b. 1938 and English plays of Mahesh Dattani, Indian playwrights.
Download or read book Graph Classes written by Andreas Brandstadt and published by SIAM. This book was released on 1999-01-01 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This well-organized reference is a definitive encyclopedia for the literature on graph classes. It contains a survey of more than 200 classes of graphs, organized by types of properties used to define and characterize the classes, citing key theorems and literature references for each. The authors state results without proof, providing readers with easy access to far more key theorems than are commonly found in other mathematical texts. Interconnections between graph classes are also provided to make the book useful to a variety of readers.
Download or read book Percolation written by Bela Bollobás and published by Cambridge University Press. This book was released on 2006-09-21 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, first published in 2006, is an account of percolation theory and its ramifications.
